Providing paver block Road at Ramu pillai street in ward 74

Amount

Dismantling the existing damaged Cement concrete road surface the debris clearing away from the site etc.complete..,

Providing and laying, spreading and compacting 0.396m3 of 45-22.40mm & 0.528m3 of 22.40-2.36mm & 0.396m3 of 2.36mm and below metal graded stone aggregate to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in subbase/basecourse on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications. MDU-CORP DATA-P-23 -SL No:8

Supplying and laying Rubberised Interlocking Paver Block M40 grade Providing and laying of 80mm thick high strength type conforming IS 15658-2007 of rubberized interlocking Paver Block in size of minimum compressive strength of 40N mm2 in uniform shape of approved make to be laid in flurring bone pattern with quarry rubbish cushion below the uniform shape of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, quarry rubbish cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers, sweeping transporting loading unloading of laying paver block as per standard specification.

Plasteringwithcementmortar(1:5)12mm,thickinallfloorsincludingcostandconveyanceofallmaterilastositeandlabourchargesetc,completeasperstandard specifications (S.I.306)

Supply of FRC Manhole 600mm size dia cover with frame including cost of conveyance loading fixing the same etc complete

Construction of manholes using sulphate resistant cement atvarious depth stoinvert including earthwork excavation asper SS20B, laying cement concretein C.M.1:3:6 using 40mm B.G.jelly for foundation ,sinking well kerbbelow G.L.for4.5m depthand above, pumping, timbering charges for 2.5m depthand above, stock brick work inC.M.1:3, for 23cmt hickwallandover 23cm thick wall, pl\astering interior with C.M.1:3,20mm thick and exterior with C.M.1:3,12mm thick, laying plainc ement concrete1:3:6 using 12.0mm to 20mm B.G.jelly fixing the frame, providing C.I.steps, manhole cover and frameetc. complete for the following sizes for each manhole (Asper the type design drawing for manholes).

Raising the existing circular manhole in heavy typeincludingthe removing theexisting the manhole cover with frameand dismantling theexisting theement concrete wallandtarroad surface aroundthe manhole susing1:2:420 mm jelly for raising the existing the manhole wallandusing CC1:2:4 with 20mm chips for finishing the top surface of manhole etc., complete.

Manufacturing Supply and Fixing of Retro Reflective Road Name sign board single arrow big size out if wide angle cuble corner micro prismatic grade sheeting confirming to IRC 57:2010 & type xI standards of ASTM D 4955-09 specifications and fixed over 2mm thick aluminium sheet back support frame of stainless steel supported by 32 NB stainless steel pipe all around and 55 NB pipe vertical post firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 30cmx30cmx45cm complete. The information message shall be made out cut out letters in blue transparant overlay film as per IRC 57-201 Guidelines , 7years pre qualification warrenty for Retro Reflective sheeting from the original sheeting manufacture & a certified copy of three years out door exposure report from an independent test lab for the product offered shall be submitted by the contractor. The sign board shall be Retro Reflective type xI. The Retro Reflective sheeting should have manufactures WATERMARK on the sheeting surface for identification. Single Arrow Big Size 35" x 18"

Add GST 18%

K.T.N.MARUTHUPANDIAN (BID ID -1299594)