Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.9 LAccepted-AOC S 7 161 GOLDEN TRUST COLONY OPP CHAWLA MARBLES SALLI ROAD PATHANKOT 145001 | PATHANKOT | PATHANKOT | PUNJAB | 145001 | ₹14.9 L | L1 | Accepted-AOC lowest bid |
| 2 | L2₹19.5 LRejected-AOC GODREJ COLISEUM B WING GR FLR BEHIND EVERARD NAGAR OFF EASTERN EXPRESS HIGHWAY SION EAST MUMBAI MAHARASHTRA 400022 UDYAM MH 18 0013176 | MUMBAI | MAHARASHTRA | 400022 | ₹19.5 L | L2 | Rejected-AOC 2nd lowest |
| 3 | Not Admitted-Fee/PreQual/Technical SCO 12 13 SECTOR 9D CHANDIGARH CHANDIGARH CHANDIGARH 160009 UDYAM CH 01 0008118 04AAACC6390C1Z3 B R 06AAACC6390C1ZZ M 04AAACC6390C1Z3 M | CHANDIGARH | CHANDIGARH | 160009 | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹24.9 L
EMD Value
₹49,795
Closing Date
9 Mar 2026, 4:00 pmClosed
Executive Engineer Construction Division FGS
Executive Engineer Construction Division FGS
FURNITURE FOR FAMILY COURT AT JUDICIAL COURT COMPLEX KHAMANO DIST FATEHGARH SAHIB
2026_CEPW_162221_1
16 Dated 26.02.2026
Open Tender
Furniture/ Fixture
30 days
Khamano
Please refer Tender documents.
4 documents required · 4 mandatory
₹5,000
₹49,795
Yes
5 May 2026
27 Feb 2026
9 Mar 2026
27 Feb 2026
9 Mar 2026
27 Feb 2026
PREMIUM CHAIR FOR PRESIDING OFFICER High back chair. The seat shall be made of double layered moulded (18+6)mm thick hot pressed commercial plywood upholstered with high resilience polyurethane foam (40+30)mm thick having density 40kg/m³ with black leatherite tapestry 0.8mm thick and 535 GSM and the back shall be made of double layered moulded hot pressed plywood (18+6)mm thick upholstered with high resilience polyurethane foam (30+25)mm thick having density 32kg/m³ with black leatherite tapestry 0.8mm thick and 535 GSM with contoured lumbar support which helps to provide full back support and maintain the natural curvature of the spine.. The seat and back shall be fixed with plywood and the armrest shall be used metal base chrome finish cushion arm with leatherite tapestry completely joint with seat and back. The chair shall have swivel tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height upto 65mm with BIFMA standard class-3 gaslift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The Pedestal shall be made up of MS CRCA chrome plated having pitch circle Dia 700 mm fitted with 5 nos. 50mm twin wheel castors which shall be made of injection moulded black nylon 30% glass filled having self-lubricating property for friction free movemen with BIFMA standards. The seat size shall be 500±10 mm (D) X 480±10 mm (W) and back size shall be 520±10 mm (W) X700 ±10 mm (Ht) from seat. Overall height shall be = 1160±10 mm, overall depth = 700±10 mm & overall width = 650±10 mm.
TABLE WITH BEVELLED GLASS 12MM FOR PRESDING OFFICER Providing and Placing in position Office Table. Overall size of the table shall be 1900 W mm(±10) x 900 D mm(±10) x 750 H mm(±10). Office Table Top LAMINATED PARTICAL BOARD 25mm Thick post forming Board With 2mm Thick Pvc Edgebanded Finish With As Per Approved Laminate Shade. Mobile Pedestal Size 400W(±10) x 4500(±10) x 680H(±10). Table Top Supported Understructure Of Table Gable - End Made Of Prime Quality 18mm Thick. Mobile Drawer Top 18mm Thick Wooden Board With 0.8mm Thick Edgebanded One Side Ducknose Postform. Mobile Drawer Used Sliding Telescopic Channel With All Fittings & Shutter Used C-Frame Handles. Mobile Drawer Move On Twin Wheel Casters 50mm Dia. Casters Made Of Moulded Black Nylon Metal Bolt Inserted & Fitted. All Wooden Panels Cleaning Corner Knitted Finish. All Wooden Panels, Gables & Modesty Fix Joints With Minifix Dowels & Other Fitting Equipment. The side unit overall size is 1200mm(±10) X 450mm(±10) X 675mm(±10). All Wooden Panels Prime Quality Board
TABLE FOR STENO Providing and placing office cum computer table For Study constructed with the help of minifix dowels and pins. Provided with one drawer attached with table and openable door storage system. Open space for the CPU placement and open shelf for the storage is provided. The length of the table top is 1200 mm(±10), width is 600 mm(±10) and height is 750 mm(±10) respectively made of 23 mm Table top prelaminated particle Board. The keboard trey is rolling on high quality 350 mm telescopic channels for smooth functioning. The trey is 575 mm(±10) broad from front with depth of 500 mm(±10). Drawers are made 400mm broad and 450 mm(±10) in depth and 150mm(±10) in height. Drawers are equiped with good quality SS handles. Provided with complete back side modesty L-1200 mm x W-600 mm and H-750 mm. All Wooden Panels Prime Quality Board With ISI Marked.
SIDE TABLE FOR STENO Clear Acrylic Writing Desk Table Top Elevator (SIZE 21x15 Inches) Most Heavy 12MM Premium Quality
CHAIR FOR STENO Non-Revolving and Non-Tilting chair with Armrest, the cantiliver type fram, Moulded armrest continuously fitted with seat bottom to backrest, Padded seat and back, seat is fitted with 15 mm Moulded Plywood, back and seat upholstered with leatherite, seat depth - 480 mm, seat width - 460 mm, backrest width - 450 mm, backrest height from seat - 480 mm, crome plated frame,
TABLE FOR ADVOCATES Providing and placing as office furniture - office table constructed with metal frame and prelaminated particle board. The table top made of thick 25mm prelaminated particle board with length of 1800 mm(±10) and width of 900 mm(±10) and height 750 mm(±10). All sharp edges of top are lipped with edge binding tape 2mm. The table top is fitted with nuts and screws on the four leg metal frame made of MS square pipe of 38 x 38 x 1.2 mm thick. All the legs are fiited with high quality rubber shoes. The overall diamensions of the table are L-1800mm(±10) x W-900mm(±10) x H-750 mm(±10). All Wooden Panels Prime Quality Board With ISI Marked.
CHAIR FOR ADVOCATES Non-Revolving and Non-Tilting chair with Armrest, the cantiliver type fram, Moulded armrest continuously fitted with seat bottom to backrest, Padded seat and back, seat is fitted with 15 mm Moulded Plywood, back and seat upholstered with leatherite, seat depth - 480 mm, seat width - 460 mm, backrest width - 450 mm, backrest height from seat - 480 mm, crome plated frame,
3 SEATER BENCH FOR PUBLIC/LITIGANTS Providing and supplying a three seater chair Overall size 1765L x 710D x 775H (all dimensions in mm) Seating height 406mm Seat/Back is made of 1.2mm thick cold roiler sheet pressed and welded to form the shape Arm/Leg: MS chrome finish 1.2mm thickness Cross Bar: MS powder coated cross bar 2mm thickness
WALL CLOCK Good quality wall clock as desired Engineer-in-Charge
TABLE FOR NAIB COURT Providing and placing office cum computer table For Study constructed with the help of minifix dowels and pins. Provided with one drawer attached with table and openable door storage system. Open space for the CPU placement and open shelf for the storage is provided. The length of the table top is 1200 mm(±10), width is 600 mm(±10) and height is 750 mm(±10) respectively made of 23 mm Table top prelaminated particle Board. The keboard trey is rolling on high quality 350 mm telescopic channels for smooth functioning. The trey is 575 mm(±10) broad from front with depth of 500 mm(±10). Drawers are made 400mm broad and 450 mm(±10) in depth and 150mm(±10) in height. Drawers are equiped with good quality SS handles. Provided with complete back side modesty L-1200 mm x W-600 mm and H-750 mm. All Wooden Panels Prime Quality Board With ISI Marked.
CHAIR FOR NAIB COURT Non-Revolving and Non-Tilting chair with Armrest, the cantiliver type fram, Moulded armrest continuously fitted with seat bottom to backrest, Padded seat and back, seat is fitted with 15 mm Moulded Plywood, back and seat upholstered with leatherite, seat depth - 480 mm, seat width - 460 mm, backrest width - 450 mm, backrest height from seat - 480 mm, crome plated frame,
ALMIRAH FOR NAIB COURT Providing, supplying and placing steel almirah in perfectly upright and straight position. The overall size of the Almirah shall be 915mm (W) X 485mm (D) X 1980mm (H) including legs. It should be supplied with 4 nos. of adjustable shelves i.e. 5 loading compartments. Door shall be made of 0.8mm thick and all other components shall be made of 0.8mm thick high yield strength CRCA
SHORT TABLES Clear Acrylic Writing Desk Table Top Elevator (SIZE 21x15 Inches) Most Heavy 12MM Premium Quality
CORNER TABLES Clear Acrylic Writing Desk Table Top Elevator (SIZE 21x15 Inches) Most Heavy 12MM Premium Quality
TABLE TOP WRITING Providing and placing office cum computer table For Study constructed with the help of minifix dowels and pins. Provided with one drawer attached with table and openable door storage system. Open space for the CPU placement and open shelf for the storage is provided. The length of the table top is 1200 mm(±10), width is 600 mm(±10) and height is 750 mm(±10) respectively made of 23 mm Table top prelaminated particle Board. The keboard trey is rolling on high quality 350 mm telescopic channels for smooth functioning. The trey is 575 mm(±10) broad from front with depth of 500 mm(±10). Drawers are made 400mm broad and 450 mm(±10) in depth and 150mm(±10) in height. Drawers are equiped with good quality SS handles. Provided with complete back side modesty L-1200 mm x W-600 mm and H-750 mm. All Wooden Panels Prime Quality Board With ISI Marked.
PETITION BOX Good quality Petition Box as desired Engineer-in-Charge
NOTICE BOARD Good quality Notice Board as desired Engineer-in-Charge
PEN STAND Good quality Pen Stand as desired Engineer-in-Charge
FOOT REST Good quality Foot Rest as desired Engineer-in-Charge
DUSTBIN Good quality Dustbin as desired Engineer-in-Charge
CHAIR FOR READER High back chair. The seat shall be made of double layered moulded (18+6)mm thick hot pressed commercial plywood upholstered with high resilience polyurethane foam (40+30)mm thick having density 40kg/m³ with black leatherite tapestry 0.8mm thick and 535 GSM and the back shall be made of double layered moulded hot pressed plywood (18+6)mm thick upholstered with high resilience polyurethane foam (30+25)mm thick having density 32kg/m³ with black leatherite tapestry 0.8mm thick and 535 GSM with contoured lumbar support which helps to provide full back support and maintain the natural curvature of the spine.. The seat and back shall be fixed with plywood and the armrest shall be used metal base chrome finish cushion arm with leatherite tapestry completely joint with seat and back. The chair shall have swivel tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height upto 65mm with BIFMA standard class-3 gaslift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The Pedestal shall be made up of MS CRCA chrome plated having pitch circle Dia 700 mm fitted with 5 nos. 50mm twin wheel castors which shall be made of injection moulded black nylon 30% glass filled having self-lubricating property for friction free movemen with BIFMA standards. The seat size shall be 500±10 mm (D) X 480±10 mm (W) and back size shall be 520±10 mm (W) X700 ±10 mm (Ht) from seat. Overall height shall be = 1160±10 mm, overall depth = 700±10 mm & overall width = 650±10 mm.
CHAIR FOR PEONS Non-Revolving and Non-Tilting chair with Armrest, the cantiliver type fram, Moulded armrest continuously fitted with seat bottom to backrest, Padded seat and back, seat is fitted with 15 mm Moulded Plywood, back and seat upholstered with leatherite, seat depth - 480 mm, seat width - 460 mm, backrest width - 450 mm, backrest height from seat - 480 mm, crome plated frame,
ALMIRAH FOR STENO AND READER FOR COURT ROOM Almirah Steel shelving cabinets with two doors, height is 1550 mm (excluing pedestal height), width is 910 mm, depth is 480 mm, 1.25 mm Hinges sheet used, fitted with Six lever lock, 50 micron powder coated, made of MS sheets 20/22 gauge. The almirah is based on strong two no of pedestals made of sheet with size of 100 mm x 125 mm.
TABLE FOR READER Providing and placing office cum computer table For Study constructed with the help of minifix dowels and pins. Provided with one drawer attached with table and openable door storage system. Open space for the CPU placement and open shelf for the storage is provided. The length of the table top is 1200 mm(±10), width is 600 mm(±10) and height is 750 mm(±10) respectively made of 23 mm Table top prelaminated particle Board. The keboard trey is rolling on high quality 350 mm telescopic channels for smooth functioning. The trey is 575 mm(±10) broad from front with depth of 500 mm(±10). Drawers are made 400mm broad and 450 mm(±10) in depth and 150mm(±10) in height. Drawers are equiped with good quality SS handles. Provided with complete back side modesty L-1200 mm x W-600 mm and H-750 mm. All Wooden Panels Prime Quality Board With ISI Marked.
SIDE TABLE FOR READER Clear Acrylic Writing Desk Table Top Elevator (SIZE 21x15 Inches) Most Heavy 12MM Premium Quality
BLINDS Good quality Blinds as desired Engineer-in-Charge
RETIRING ROOMS TABLE WITH SIDE TABLE + BEVELLED GLASS 12MM FOR PRESIDING OFFICER Providing and Placing in position Office Table. Overall size of the table shall be 1900 W mm(±10) x 900 D mm(±10) x 750 H mm(±10). Office Table Top LAMINATED PARTICAL BOARD 25mm Thick post forming Board With 2mm Thick Pvc Edgebanded Finish With As Per Approved Laminate Shade. Mobile Pedestal Size 400W(±10) x 4500(±10) x 680H(±10). Table Top Supported Understructure Of Table Gable - End Made Of Prime Quality 18mm Thick. Mobile Drawer Top 18mm Thick Wooden Board With 0.8mm Thick Edgebanded One Side Ducknose Postform. Mobile Drawer Used Sliding Telescopic Channel With All Fittings & Shutter Used C-Frame Handles. Mobile Drawer Move On Twin Wheel Casters 50mm Dia. Casters Made Of Moulded Black Nylon Metal Bolt Inserted & Fitted. All Wooden Panels Cleaning Corner Knitted Finish. All Wooden Panels, Gables & Modesty Fix Joints With Minifix Dowels & Other Fitting Equipment. The side unit overall size is 1200mm(±10) X 450mm(±10) X 675mm(±10). All Wooden Panels Prime Quality Board
MAIN CHAIR FOR PRESIDING CHAIR High back chair. The seat shall be made of double layered moulded (18+6)mm thick hot pressed commercial plywood upholstered with high resilience polyurethane foam (40+30)mm thick having density 40kg/m³ with black leatherite tapestry 0.8mm thick and 535 GSM and the back shall be made of double layered moulded hot pressed plywood (18+6)mm thick upholstered with high resilience polyurethane foam (30+25)mm thick having density 32kg/m³ with black leatherite tapestry 0.8mm thick and 535 GSM with contoured lumbar support which helps to provide full back support and maintain the natural curvature of the spine.. The seat and back shall be fixed with plywood and the armrest shall be used metal base chrome finish cushion arm with leatherite tapestry completely joint with seat and back. The chair shall have swivel tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height upto 65mm with BIFMA standard class-3 gaslift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The Pedestal shall be made up of MS CRCA chrome plated having pitch circle Dia 700 mm fitted with 5 nos. 50mm twin wheel castors which shall be made of injection moulded black nylon 30% glass filled having self-lubricating property for friction free movemen with BIFMA standards. The seat size shall be 500±10 mm (D) X 480±10 mm (W) and back size shall be 520±10 mm (W) X700 ±10 mm (Ht) from seat. Overall height shall be = 1160±10 mm, overall depth = 700±10 mm & overall width = 650±10 mm.
VISITOR CHAIR Non-Revolving and Non-Tilting chair with Armrest, the cantiliver type fram, Moulded armrest continuously fitted with seat bottom to backrest, Padded seat and back, seat is fitted with 15 mm Moulded Plywood, back and seat upholstered with leatherite, backrest width-450 mm, backrest height from seat-480 mm, crome plated frame
SOFA 3+2 SEATER Supplying and placing two seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 40Kg/m³ in seat and 32Kg/m³ in back. There shall be cushion arm provided padded with high resilience polyurethane foam having density 32Kg/m³. The complete structure shall be upholstered with leatherite tapestry 0.8±0.1 mm thick and 535 GSM. The understructure shall consist of SS 202 grade leg having Dia. 38mm. There shall be shoe provided at the bottom to avoid scratches on the floor. The seat size shall be 540±10 mm(D) X 1050±10 mm(W), seat height = 430±10 mm, overall width = 1450±10 mm, overall depth = 760±10 mm & overall height = 750±10 mm.
CENTER TABLE Providing and supplying a wooden corner table with overall size 1200mm X 600mm X 450mm. Table top is made up of solid wood along with 8mm tinted glass at the top. The table legs measure 45mm X 45mm. A solid wood shelf is provided below. The whole table is PU polished to provide an elegant look.
ALMIRAH WITH LOOKING GLASS Almirah Steel shelving cabinets with two doors, height is 1550 mm (excluing pedestal height), width is 910 mm, depth is 480 mm, 1.25 mm Hinges sheet used, fitted with Six lever lock, 50 micron powder coated, made of MS sheets 20/22 gauge. The almirah is based on strong two no of pedestals made of MS sheet with size of 100 mm x 125 mm.
CONVENER TABLE Providing and placing office cum computer table For Study constructed with the help of minifix dowels and pins. Provided with one drawer attached with table and openable door storage system. Open space for the CPU placement and open shelf for the storage is provided. The length of the table top is 1200 mm(±10), width is 600 mm(±10) and height is 750 mm(±10) respectively made of 23 mm Table top prelaminated particle Board. The keboard trey is rolling on high quality 350 mm telescopic channels for smooth functioning. The trey is 575 mm(±10) broad from front with depth of 500 mm(±10). Drawers are made 400mm broad and 450 mm(±10) in depth and 150mm(±10) in height. Drawers are equiped with good quality SS handles. Provided with complete back side modesty L-1200 mm x W-600 mm and H-750 mm. All Wooden Panels Prime Quality Board With ISI Marked.
CONVENER CHAIR Non-Revolving and Non-Tilting chair with Armrest, the cantiliver type fram, Moulded armrest continuously fitted with seat bottom to backrest, Padded seat and back, seat is fitted with 15 mm Moulded Plywood, back and seat upholstered with leatherite, backrest width-450 mm, backrest height from seat-480 mm, crome plated frame
CORNER TABLE Clear Acrylic Writing Desk Table Top Elevator (SIZE 21x15 Inches) Most Heavy 12MM Premium Quality
BOOK CASE 4 DRAWERS Good quality Book case 4 drawers as desired Engineer-in-Charge
LOOKING WALL MIRROR WITH WOODEN FRAME Good quality Looking Wall Mirror with Wooden Frame as desired Engineer-in-Charge
WALL CLOCK Good quality wall clock as desired Engineer-in-Charge
TABLE TOP WRITING Providing and placing as office furniture - office table constructed with metal frame and prelaminated particle board. The table top made of thick 25mm prelaminated particle board with length of 1800 mm(±10) and width of 900 mm(±10) and height 750 mm(±10). All sharp edges of top are lipped with edge binding tape 2mm. The table top is fitted with nuts and screws on the four leg metal frame made of MS square pipe of 38 x 38 x 1.2 mm thick. All the legs are fiited with high quality rubber shoes. The overall diamensions of the table are L-1800mm(±10) x W-900mm(±10) x H-750 mm(±10). All Wooden Panels Prime Quality Board With ISI Marked.
PAPER SHREDDER Good quality Paper Shredder as desired Engineer-in-Charge
DUSTBIN Good quality Dustbin as desired Engineer-in-Charge
FOOT REST Good quality Foot Rest as desired Engineer-in-Charge
FOOT MAT Good quality Foot Mat as desired Engineer-in-Charge
PEN STAND Good quality Pen Stand as desired Engineer-in-Charge
NOTICE BOARD Good quality Notice Board as desired Engineer-in-Charge
TABLE LAMP Good quality Table Lamp as desired Engineer-in-Charge
COAT HOLDER Good quality Coat Holder as desired Engineer-in-Charge
CURTAINS Good quality Curtains as desired Engineer-in-Charge
BLINDS Good quality Blinds as desired Engineer-in-Charge
WIRELESS CALLING BELL Good quality Wireless Calling Bell as desired Engineer-in-Charge
JUDGMENT WRITER ROOM COMPUTER TABLE Providing and placing office cum computer table For Study constructed with the help of minifix dowels and pins. Provided with one drawer attached with table and openable door storage system. Open space for the CPU placement and open shelf for the storage is provided. The length of the table top is 1200 mm(±10), width is 600 mm(±10) and height is 750 mm(±10) respectively made of 23 mm Table top prelaminated particle Board. The keboard trey is rolling on high quality 350 mm telescopic channels for smooth functioning. The trey is 575 mm(±10) broad from front with depth of 500 mm(±10). Drawers are made 400mm broad and 450 mm(±10) in depth and 150mm(±10) in height. Drawers are equiped with good quality SS handles. Provided with complete back side modesty L-1200 mm x W-600 mm and H-750 mm. All Wooden Panels Prime Quality Board With ISI Marked.
CHAIR FOR JUDGEMENT WRITER Non-Revolving and Non-Tilting chair with Armrest, the cantiliver type fram, Moulded armrest continuously fitted with seat bottom to backrest, Padded seat and back, seat is fitted with 15 mm Moulded Plywood, back and seat upholstered with leatherite, backrest width-450 mm, backrest height from seat-480 mm, crome plated frame
VISITER CHAIR Non-Revolving and Non-Tilting chair with Armrest, the cantiliver type fram, Moulded armrest continuously fitted with seat bottom to backrest, Padded seat and back, seat is fitted with 15 mm Moulded Plywood, back and seat upholstered with leatherite, backrest width-450 mm, backrest height from seat-480 mm, crome plated frame
SIDE TABLE Clear Acrylic Writing Desk Table Top Elevator (SIZE 21x15 Inches) Most Heavy 12MM Premium Quality
ALMIRAH Almirah Steel shelving cabinets with two doors, height is 1550 mm (excluing pedestal height), width is 910 mm, depth is 480 mm, 1.25 mm Hinges sheet used, fitted with Six lever lock, 50 micron powder coated, made of MS sheets 20/22 gauge. The almirah is based on strong two no of pedestals made of MS sheet with size of 100 mm x 125 mm.
12MM BEVELED GLASS Good quality 12MM Beveled Glass desired Engineer-in-Charge
SIDE BOARD Good quality Side Board as desired Engineer-in-Charge
CURTAINS Good quality Curtains as desired Engineer-in-Charge
BLINDS Good quality Blinds as desired Engineer-in-Charge
WALL CLOCK Good quality Wall Clock as desired Engineer-in-Charge
PAPER SHREDDER Good quality Paper Shredder as desired Engineer-in-Charge
CORNER TABLE Clear Acrylic Writing Desk Table Top Elevator (SIZE 21x15 Inches) Most Heavy 12MM Premium Quality
AHLMAD ROOM TABLE Providing and placing office cum computer table For Study constructed with the help of minifix dowels and pins. Provided with one drawer attached with table and openable door storage system. Open space for the CPU placement and open shelf for the storage is provided. The length of the table top is 1200 mm(±10), width is 600 mm(±10) and height is 750 mm(±10) respectively made of 23 mm Table top prelaminated particle Board. The keboard trey is rolling on high quality 350 mm telescopic channels for smooth functioning. The trey is 575 mm(±10) broad from front with depth of 500 mm(±10). Drawers are made 400mm broad and 450 mm(±10) in depth and 150mm(±10) in height. Drawers are equiped with good quality SS handles. Provided with complete back side modesty L-1200 mm x W-600 mm and H-750 mm. All Wooden Panels Prime Quality Board With ISI Marked.
CHAIR FOR AHLMAD Non-Revolving and Non-Tilting chair with Armrest, the cantiliver type fram, Moulded armrest continuously fitted with seat bottom to backrest, Padded seat and back, seat is fitted with 15 mm Moulded Plywood, back and seat upholstered with leatherite, backrest width-450 mm, backrest height from seat-480 mm, crome plated frame
SIDE TABLE Clear Acrylic Writing Desk Table Top Elevator (SIZE 21x15 Inches) Most Heavy 12MM Premium Quality
CORNER TABLE Clear Acrylic Writing Desk Table Top Elevator (SIZE 21x15 Inches) Most Heavy 12MM Premium Quality
VISTOR CHAIR Non-Revolving and Non-Tilting chair with Armrest, the cantiliver type fram, Moulded armrest continuously fitted with seat bottom to backrest, Padded seat and back, seat is fitted with 15 mm Moulded Plywood, back and seat upholstered with leatherite, backrest width-450 mm, backrest height from seat-480 mm, crome plated frame
ALMIRAH Almirah Steel shelving cabinets with two doors, height is 1550 mm (excluing pedestal height), width is 910 mm, depth is 480 mm, 1.25 mm Hinges sheet used, fitted with Six lever lock, 50 micron powder coated, made of MS sheets 20/22 gauge. The almirah is based on strong two no of pedestals made of MS sheet with size of 100 mm x 125 mm.
COMPUTER TABLE Providing and placing office cum computer table For Study constructed with the help of minifix dowels and pins. Provided with one drawer attached with table and openable door storage system. Open space for the CPU placement and open shelf for the storage is provided. The length of the table top is 1200 mm(±10), width is 600 mm(±10) and height is 750 mm(±10) respectively made of 23 mm Table top prelaminated particle Board. The keboard trey is rolling on high quality 350 mm telescopic channels for smooth functioning. The trey is 575 mm(±10) broad from front with depth of 500 mm(±10). Drawers are made 400mm broad and 450 mm(±10) in depth and 150mm(±10) in height. Drawers are equiped with good quality SS handles. Provided with complete back side modesty L-1200 mm x W-600 mm and H-750 mm. All Wooden Panels Prime Quality Board With ISI Marked.
12MM BEVELED GLASS Good quality 12MM Beveled Glass desired Engineer-in-Charge
WALL CLOCK Good quality Wall Clock as desired Engineer-in-Charge
PAPER SHREDDER Good quality Paper Shredder as desired Engineer-in-Charge
BLINDS Good quality Blinds as desired Engineer-in-Charge
CURTAINS Good quality Curtains as desired Engineer-in-Charge
SIDE BOARD Good quality Side Board as desired Engineer-in-Charge
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.39 MB
sbd.pdf
Tender Documents • 22.74 MB
BOQ_328750.xls
BOQ • 0.44 MB
Download all tender documents and submit your bid