8200 REPAIR REPLACEMENT OF INTERNAL ELECTRIC WIRING FITTINGS AND FIXTURES REPAIR MAINT OF FANS GEYSERS IN AFMC UNDER GE CENTRAL PUNE

Amount

Taking down old unserviceable point wiring( light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants,regulators sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc.complete all as specified and directed. Note - (credit for above items should be made as per conditions separately).

Taking down old unserviceable/worn out sub main wiring/service wire of any type and size complete all as specified and directed.

Taking down Main switches/DBs of any make and type including teakwood board, MCBs/MCCBs etc complete and making good the disturbed surfaces with existing finish complete all as specified and directed.

M&L for point wiring of any length using approved colour coding as per IS,with stranded copper conductor 1.5 Sq.mm(Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked in and including heavy duty, PVC casing caping of required size including all accessories etc. heavy duty ISI marked, with PVC modular boxes including modular frame / cover plate suitable for mounting switches/ sockets etc and PVC insulated stranded copper conductor 1.5 Sq.mm single core cable as earth and connecting to earth dolly complete including cutting chases in the wall for housing box and all as specified and directed for the following:- Note:- Cost for cutting chases in walls and making good to disturbed surfaces shall deemed to be included in the quoted rate.

One light/fan point controlled by one switch complete all as specified and directed.

One 3 pin 5 Amps Socket outlet point controlled by one switch on independent board complete all as specified

One 3 pin 5 amps socket outlet point on same board complete all as specified.

One bell/buzer point controlled by one bell push complete all as specified.

All as per item No 4 here-in-before but with 2.5 sqmm (nominal aren) single core, PVC insulated and unsheathed stranded FRLS cable 1100 volt grade, ISI-694 marked including PVC insulated stranded copper conductor 2.5 sqmm single core cable as earthwire and connectiing to earth dolly complete all as specified for one 15 amp socket outlet point on independent board.

M&L for point wiring of any length using approved colour coding as per IS,with stranded copper conductor 1.5 Sq.mm(Nominal area),single core,PVC insulated and unsheathed stranded FRLS cable 1100 volts grade,ISI - 694 marked in and including heavy duty,PVC casing caping of required size including all accessories heavy duty ISI marked,with MS sunken boxes complete with 3mm thick plastic laminated sheet ISI marked suitable for mounting switch, socket etc and pVC insulated stranded copper conductor 1.5 sqmm (nominal area) single core FRLS cable as earth continuity conductor connected to common earth dolly complete all as specified and directed for the following:-

One light/fan point controlled by one switch complete all as specified.

One 3 pin 5 Amps Socket outlet point controlled by one switch on independent board complete all as specified.

One 3 pin 5 amps socket outlet point on same board with other switches complete all as specified.

One bell/buzer point controlled by one bell push complete all as specified.

One light point controlled by two 2-way switches complete all as specified.

All as per item No 6 here-in-before but 2.5 Sqmm copper conductor (FRLS) cable for 15 amps socket outlet point on independent board and continuous PVC insulated copper earth wire 2.5 Sqmm complete all as specified and directed.

M&L point wiring complete with and including single core FRLS PVC insulated un- sheathed flexible bright annealed multi stranded copper conductor cables 1.5 sqmm (22/0.30mm ) 1100Volts grade drawn through and including heavy grade PVC rigid conduits 20 mm or higher dia as required at site, totally concealed in walls /floors/ceiling/roofs etc. including all conduit accessories/fittings/junction boxes/inspection covers etc. of heavy grade, ISI marked and modular type sunken boxes factory made with modular frame/ cover plate including 1.5 sqmm 1100 V grade FRLS PVC insulated, unsheathed flexible multi stranded copper conductor cable as continuous earth wire connected to metallic bodies of luminaires/fans etc. at one end and to common earth dolly at other end, complete all as specified and directed for the following: Note:- Cost for cutting chases and making good to disturbed surfaces shall deemed to be included in the quoted rate.

One light/fan point controlled by one, One-way switch complete all as specified

One 5 pin 5Amp Socket outlet point on same board with other switches including earth wire.

One 5 pin 5Amp Socket outlet point on independent board complete all as specified.

All as per Item No 8 above but with stranded copper conductor 2.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent board, including PVC insulated multistranded FRLS copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.

M&L for point wiring of any length using approved colour coding as per IS, with stranded copper conductor 1.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked, in PVC rigid conduits 20 mm dia or above, ISI marked including all accessories etc. with PVC boxes suitable for mounting switches/sockets etc. and PVC insulated stranded copper conductor 1.5 Sq.mm single core cable as earth and connecting to common earth dolly complete all as specified for the following:- (Note:- Making good of disturbed surfaces will be done by contractor without any extra claims.)

One light/fan point controlled by one switch complete all as specified and directed.

One 3 pin 5 Amps Socket outlet point controlled by one switch on independent board complete all as specified

One 3 pin 5 amps socket outlet point on same board complete all as specified.

All as per Item No. 10 above but with stranded copper conductor 2.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent board, including PVC insulated multistranded FRLS copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.

S&F piano type switch 5 amps single pole, 230V ISI marked complete all as specified

S&F piano type switch 5 amps single pole, two way 230V ISI marked complete all as specified

S&F for Bell push, flush type, 5 amp complete all as specified.

S&F piano type switch 15 amps single pole, 230V ISI marked complete all as specified

S&F socket outlet 2 in 1, 5 amps 5 pin 230 volts flush type complete all as specified.

S&F socket outlet 2 in 1 (multipurpose) 3 pin 5 and 15 Amps flush type all as specified.

S&F bell electrical ding dong including PVC board ISI marked complete all as specified

S&F ceiling rose surface type three terminals complete all as specified and directed.

S&F lamp holder (angle/bracket) insulated body, with back plate for batten fittings complete for 230 V 50Hz AC supply complete all as specified.

S&F in replacement of LED bulb 7 watt screw type as per site requirement and make as directed.

S&F modular switch 6A SP one - way 230V white ivory finish complete all as specified

S&F modular bell push 6A 1 module complete all as specified and directed.

S&F modular switch 16A SP one - way 230V white ivory finish complete all as specified

S&F modular socket outlet 2/3 pin 6 amps, multipurpose 2 module 230 Volts, single pole one way suitable for plug tops, complete all as specified.

S&F modular socket outlet 2/3 pin 16 amps, multipurpose 2 module 230 Volts, single pole one way suitable for plug tops, complete all as specified.

S & F stepped type electronic fan regulator flush type on the existing board complete all as specified and directed.

S&F modular type stepped electronic fan regulator all as specified and directed.

S & F bell, AC 230 volts single pole including PVC board ISI marked complete all as specified and directed

S & F in repair white cover plate with frame, 2 module complete all as specified.

All as per item No 30 here-in-before but 3 module complete all as specified.

All as per item No 30 here-in-before but 4 module complete all as specified.

All as per item No 30 here-in-before but 6 module complete all as specified.

All as per item No 30 here-in-before but 8 module complete all as specified.

S&F in replacement of LED light fitting surface and wall mounted LED batten with Aluminium housing & integrated electronic driver complete in all respect of 10W cap. Cat Part No BCLSB 10 WH of make - Bajaj or equivalent model from the make given in the make list

S & F in replacement LED Tube light fittings wall mounted, 18 W LED 6500K with Opal white Poly Carbonate diffuser provided with high efficient integral constant current LED Driver 230 V etc. complete with mounting batten including all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size from ceiling rose to connector Conforming to Cat Part No. BLRB DB 118 & BLRB18 W CW LED Make :- Bajaj or equivalent model from the make given in make list.

S & F in replacement of LED light fittings 2'x2', of 28 watts capacity environmental friendly, new genereation, aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source 230 volts with all accessories internally pre wired and necessary mounting arrangements, complete all as specified. Make :- Make HAVELLS Cat part No. PLUTONEO2X2PLR28WLED840S (HSN 9405) 28 W or equivalent model from the make given in make list.

All as per item No 37 here-in-before but 2' x 2' of 34Watt capacity and cat part No PLUTOSURFACE 2x2 PLS 34 WLED 840S of make Havell's or requivalent model from the make given in make list.

S & F in replacement of round recessed mounted AL die - cast aluminium luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation of 15W LED downlighter of white/neutral white color temperature etc, prewired and all accessories complete all as specified and directed Make - Cat part No. BGSLO SLEEK 15W WH RD of Bajaj or equivalent model from the make given in the make list.

S&F LED security light in replacement of luminaries 30 watt complete with all accessories and wall mounting bracket of suitable size including clamps, nut bolts etc. prewired Conforming to Havells Cat Part No. BCLST 30W LED I or equivalent modal from the make given in make list.

Supply & fix in repair electronic driver suitable for 2'x2' LED light fitting 28/36 Watt system complete all as specified and directed.

Supply & fix in repair electronic driver suitable for round LED light fitting 15/20 Watt system complete all as specified and directed.

Supply & fix in repair electronic driver suitable for round LED light fitting 15/18 Watt system complete all as specified and directed.

Supply & fix in repair electronic driver suitable for LED light fitting 30 Watt system complete all as specified and directed.

M & L for Sub main wiring complete with two single core 2.5 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 2.5 sqmm in and including PVC casing caping and accessories complete all as specified. Note:- (i) Making good of disturbed surfaces will be done by contractor without any cost. (Note :- (ii) 3 runs of 2.5 Sqmm conductor and one run of PVC casing caping shall be measured as one unit length.)

M & L for Sub main wiring complete with two single core 2.5 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 2.5 sqmm in and including PVC conduit and accessories complete all as specified. (Note:- (i) Making good of disturbed surfaces will be done by contractor without any cost (ii) 3 runs of 2.5 Sqmm conductor and one run of PVC conduit shall be measured as one unit length.)

M & L for Sub main wiring complete with two single core 4 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 4 sqmm in and including PVC casing caping incl accessories complete all as specified. Note:-(i) Making good of disturbed surfaces will be done by contractor without any cost. (Note :-(ii) 3 runs of 4 Sqmm conductor and one run of PVC casing caping shall be measured as one unit length.)

All as per item No 47 here-in-before but in existing PVC conduit. (Note :-(i) 3 runs of 4 Sqmm conductor shall be measured as one unit length.)

M & L for Sub main wiring complete with two single core 4 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 4 sqmm in and including PVC conduit incl accessories complete all as specified. (Note:- (i) Making good of disturbed surfaces will be done by contractor without any claims. (ii) 3 runs of 4 Sqmm conductor and one run of PVC conduit shall be measured as one unit length.)

M & L for Sub main wiring complete with four single core 4 sqmm and one core of 4 sq.mm earth wire,1100volts FRLS grade, PVC insulated, stranded copper conductor cable with continuous copper earth conductor in and including PVC casing caping including accessaries complete. (Note:- 5 runs of 4 Sqmm conductor and one run of PVC casing caping shall be measured as one unit length).

All as per item No 50 here-in-before but in existing PVC conduit. (Note:- 5 runs of 4 Sqmm conductor shall be measured as one unit length).

M & L for submain wiring complete with four single core 6 sqmm and one single core of 6 sqmm as earth wire 1100 volt FRLS grade PVC insuated stranded copper conductor in existing PVC conduct. Note:- 5 runs of 6 sqmm conductor shall be measured as one unit length.

S & F vertical 4 way TPN double door,recess mounted/wall mounted, MCCB as incomer and outgoing MCB SP/TP is 3 pole V-Tec of 100A rating & 16KA breaking capacity, MCCB is pre-fitted at factory & including price of MCCB, all as specified by Engineer in charge( Note : Empty space shall be covered by blanking plate and connect with lugs without any extra cost).

S & F MCB TPN DB 4 way double door with 200 amps rated busbar 415 V, all as specified.

S & F MCB SPN DB 8 way, double door, with 200 amp rated busbar 240 V, all as specified.

S & F MCB DB 4 way, double door, with 200 amp rated busbar 240 V, SPN all as specified.

S & F for MCB Single pole rated capacity 6 to 32 amps, 240 V breaking capacity 10 KA ,C- curve complete all as specified.

S & F for MCB double pole of rated capacity 32 amps, 240 volts breaking capacity 10 KA, C-curve complete all as specified.

S & F for MCB four pole of rated capacity 63 amps, 415 volts breaking capacity 10 KA, C-curve complete all as specified.

S & F in replacement of 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4.0 mm dia suspension wire, one twin core cable flat or circular of size 6.0 sqmm complete all as specified and directed.

S & F in replacement of 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4.0 mm dia suspension wire, one twin core cable flat or circular of size 10.0 sqmm complete all as specified and directed.

M&L in repairs cable PVC insulated 3 core 2.5 Sqmm with stranded copper conductor 1100V grade from socket/switch to geyser complete all as specified.

M&L in repairs cable PVC insulated 3 core 4.0 Sqmm with stranded copper conductor 1100V grade complete all as specified.

Taking down fans, removing to workshop for servicing, cleaning, lubricating, spray painting one coat with synthetic enamel paint, writing MES No. replacement of split pin, rubber bush and other spare required if any including fixing PVC cable with stranded copper conductor of size 0.75 Sqmm and refixing the fans at the same locations complete for the following sizes. (Note:- spare parts like bearing, terminal connector, gun metal bush shall be measured and paid seperately as supply only).

Ceiling fans of 1200/1400 mm size

Exhaust fan of 300 to 450 mm size

Wall mounting fan of 400 mm size

Supply only the following spare parts :-

Bearing 6200 to 6203 ZZ Make - SKF or equivalent

Terminal conductor 3 way Bakelite

Brass gun metal bushing suitable of size 1200/1400mm sweep ceiling fan.

S&F in replacement Capacitor 2.5mfd 230 volts complete all as specified and directed.

S&F in replacement Capacitor 4mfd 230 volts complete all as specified and directed.

Supply and Fix in replacement canopy for ceiling fans (Set of two) complete all as specified.

Supply and Fix in replacement MS clamp with rubber reel, nuts, bolts, split pin etc suitable for 1200/1400 mm swwep ceiling fan complete all as specified.

M&L transporting the ceiling fans to local workshop, rewinding complete with super enamelled copper wire of same guage and weight, replacement of insulation paper, varnishing, heating up and testing complete including taking down and refixing the fan at positions complete all as specified.

Ceiling fan 1200/1400mm sweep working on 230 volts AC supply

Exhaust fan upto 250/300/350mm sweep working on 230 volts AC supply

Exhaust fan 380/450mm sweep working on 230 volts AC supply

Wall mounting fan of 400mm size,working on 230 volts AC supply

S&F in replacement down rod made out of GI pipe medium grade 15mm dia with fan clamps incl drilling cutting threading etc all as directed for ceiling fan 1200/1400 sweep of following sizes:-

2 ft long

4 ft long

6 ft long

M & L servicing of geyser of 1.5/2 KW capacity, cleaning, overhauling, spray painting with one coat of synthetic enamel paint including writing MES no and refixing the geyser all as specified.

Supply & fix in replacement thermostat ISI marked suitable for the Geysers 25 ltrs. to 50 ltrs capacity complete all as specified.

Supply & fix in replacement fusible plug ISI marked suitable for 25 and 50 ltrs. capacity Geysers complete all as specified.

Supply & fix in replacement safety valve ISI marked suitable for 25 and 50 ltrs. capacity Geysers complete all as specified.

Supply & fix in replacement heating element for following rating as required at site(any type) including rubber washers (ISI marked) complete all as specified.

Supply & fix in replacement storage inner tank made out of copper sheet suitable for following capacity geysers complete all as specified.

25 ltrs capacity

50 ltrs capacity

Supply & fix in replacement apparatus end plate including rubber washers for Geyser of 25 to 50 ltrs. Capacity complete all as specified.

Supply & fix in replacement PVC connections pipe with brass hexagonal adapters both side. Suitable for 15mm dia pipe 60 cm long for cold water as per requirement complete all as specified.

Supply & fix in replacement PVC connections pipe steel braided with brass hexagonal adapters both side. Suitable for 15mm dia pipe 60 cm long for hot water as per requirement complete all as specified.

Supply & fix in replacement non-return valve 15mm / 20mm dia of brass ISI marked complete all as specified.

M&L for repair to Geysers inner water tank of 25 to 50 ltrs. capacity in gas welding / brazing for completely arresting leakage including testing complete all as specified.

Supply & fix in replacement indicators of Geysers 25 to 50 ltrs. Capacity complete all as specified.

Supply & fix in replacement gasket rubber ring for Heater plate of any size Geysers complete all as specified.

Supply & fix in replacement outer container made out of 14 gauge CRCA sheet duly painted complete all as specified.

Suitable for 25 ltrs. capacity

Suitable for 50 ltrs. capacity

S&F 240 V, Single pole and neutral enclosure with a two pin and earth plug and socket complete with one 20 amp single pole MCB complete all as specified.

M & L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected to and incl GI wire 4 mm dia and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover and MS angle iron frame, watering arrangement with GI pipe 20 mm dia medium grade and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete (NOTE:-GI earth wire and protection pipe beyond 7.5m will be measured and paid separately).

M & L For fixing earth continuity conductor or main earth lead fixed to wall or buried in ground or drawn in GI pipe with 4 sqmm GI Wire complete all as specified.

SUNIT TRADING CORPORATION

M/S DHEER ENGINEERING

Reliable Enterprises

Sparkh Electricals & Works

M/S - SUJIT ELECTRICALS