PROVN OF FIRE PROOF METALLIC FALSE CEILING AND METALLIC DUCT COVERS AT DK EE HALL AND EQPT ROOM OF AFNET AND SPECIAL REPAIRS TO ROOF OF EE HALL AT MOTITIBBA AT AF STN DALHOUSIE

Material and labour 20mm GI tubes medium grade with all fitting Supply and fixing to walls or ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.

Taking down cement plasters on brick or conc surfaces incl at any height racking out joints, hacking for key scrubbing down with water,etc complete all as specified and directed by Engineer-in-Charge. Note : Quoted rate shall be inclusive of use of scaffolding , trestles , ladders ,cradles etc necessary for execution of work and protective measures and working in buildings upto any height

Supply only water proofing cxompound complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of new plastered surfaces and applying total two coats (1st base coat in single colour and 2nd coat in camoflauged pattern with atleast three colours) of 100% premium acrylic emulsion paint having VOC less than 50gm/lit and UV resistance as perIS 15489:2004, Alkali and funggal resistance , dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applieed @0.90litre/10sqm over surfaces complete all as specified and directed by Engineer-in-Charge. Note : Quoted rate shall be inclusive of use of scaffolding , trestles , ladders ,cradles etc necessary for execution of work and protective measures and working in buildings upto any height at Motitba and Dainkund.

Supply and fixing 0.63mm thick galvanised, corrugated mild steel sheeting with two corrrugations side lap, fixed with coach screws and washers, in roofs, wall etc. with grade of zinc coating 275 complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of new steel and iron surfaces of any description over 10 Cm width or girth not otherwise described and applying two coats of synthetic enamel paint in camoflaoughed pattern(1st base coat in single colour and 2nd coat in camoflauged pattern with atleast three colours) as approved by user and directed by Engineer-in-Charge over a coat of red oxide primer over a coat of moderant solution to remove zinc coating complete all as specified and directed by Engineer-in-Charge

Supply and fixing Fe 410w Gde E-250MS Qualty A plates plain or chequered square cut or notched forming holes drilled or welded any thickness complete all as specified and directed by Engineer-in-Charge

Supply and fixing Fe 410-w(Gde E 250) qualty B Stairs (Framed ) including stringers ,treadesw,landing, balusters ,hand rails etc including cleats, brackets etc complete all as specified and as directed by the Engir- in- Charge.

Supply and fixing in replacement of copper strip of size 20x3 mm complete with saddles/ insulators made out of PVC or fibre and fixing screws for roof conductor/down conductor including welding or brazing for joints complete all as specified and directed by Engineer-in-Charge.

Material and labour for taking down serviceable LED ceiling light of size 2'x'2 and smoke detector, fire sensor etc from ceiling light and refixing again on metalic false ceiling after cutting the metalic sheet in proper way, connecting the items with existing wiring and testing complete all as specified and directed by Engineer-in-Charge.

Material and labour sub main wiring with two single core PVC-FRLSH insulated unsheathed multi stranded copper conductor cable of size 4.0 sqmm drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 19 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc laid in concealed position with 4.0 Sqmm PVC-FRLSH insulated unsheathed multi stranded copper conductor as a continuous earth wire including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of paris/ Putti or distemper / colour wash with same existing colour surfaces complete all as specified and directed by Engineer-in-Charge.

Supply and fixing GI clip in 600x600 x0.5 mm plain white powder coated metal ceiling tiles system security fixed with supension angles complete all as speceified and directed by Engineer in charge.

Supply and fixing Fe 410w Gde E-250MS Qualty A plates plain or chequered square cut or notched forming holes drilled or welded any thickness complete all as specified and directed by Engineer-in-Charge.

Material and labour15mm thick rendering in cement mortar 1:4 on fair faces of brick work surface rendering is to be even and smooth with out using extra cement at any height complete all as specified and directed by Engineer in charge.

Material and labour for Preparation new surfaces of walls and applying two coats of oil emulsion distemper over a coat of 3 mm thick wall putty complete all as specified and directed by Engineer-in-Charge.

Material and labour for 1:4:8 type D2 using 40 mm graded aggregate as in fdn filling or mass concerete complete all as specified and directed by Engineer-in-Charge.

Material and labour Linoleum, 4.5 mm thick plain coloured, laid dry in floors including stretching, cutting and fitting and sealed down with an approved adhesive complete all as specified and directed by Engineer in charge.