Renovation and painting work At RTO Jhansi

Amount

Civil Work (Labour With Material)

Dismantiling brick work or stone work in lime or cement mortar and including including staking of materials as directed by Engineer-in-charge with in a distance of 60 mtr. (200feet) SI. No. 692

Providing & Laying "Brick bat coba" 100mm thick laid with M-150 class brick bat coba 7.50cm thick with gap of 15mm to each other, 20mm thick base of cement mortar proofing compound spreading cement slurry mixed with aereliccement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30mm X 30cm and side wall parapet shall be montythic plaster wall upto 30cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand and masonary coba with top finishing plaster mixing with acetic water proofing compound @ 2% by weight & including supply of all materials labour T&P etc. required for proper completion of works in Sunkan area Toilet & Bath

Dismantiling doors & windows , chowkhats, with hold fast and including stacking of dismantled materials asdirected by Engineer-in-charge with in a distance of 60 mtr. (200feet) SI. No. 703

R.C.C work with cement approved coarse sand and 20 mm gauge stone ballast in the proportions of 1:1.5:3 in Slab excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. also including supply of all materials,labour and T&P etc. required for proper completion of the work .Binding wire cost being included in the item for Micellius work.

Supply of approved M.S. Z section windows and ventilators including supply of all materials its fabrication nut & bolt hold fast required complete of all respect at site and also including cost of handle stay rod etc an one coat of red oxide paint in the respect site of work. SI. New Item-1

Scraping old white colour wash including disposal of refuse material as directed by Engineer-in-charge with in a distance of 60 mtr. (200feet) Pg. No.55/ SI. No. 708

Finishing wall surface with approved make and quality birla White cement based putty 1 mm thick approved brand and making smood surfaces including supply of all material T&P etc required for proper completion of the work

Finishing walls with Apex Ultima weather proof exterior emulsion paint of approved make and quality on new/old finished work with two coat to give and even shed including supply of materials, labour and T&P etc required for proper completion of the work.

Painting and distempring one priming coat and one coat oil distemper on previously old surface including supply of all material labours and T&P etc. SI. No. 649+650+651

Decorative ceiling tiles Si. No. 6b

Dismentling cement concrete or brick or granular thick floors including base concrete and including stacking of dismantled material as directed by Engineer-in-charge with in a distance of 60 mtr. (200feet) SI. No. 697

Cement concrete with 4 cm gauge approved stone ballast approved coarse sand and cement in the proportion of 1:2:4 including supply of all materials labour and T&P required for proper completion of the work SI. No. 279

P/L (white/coloured) Kajaria tiles, Ramano tiles flooring over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement (with pigment) slurry including rubbing and polishing complete. Page no. 43

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern &C.P.flush bend with fittings &C.I.brakets 40mm flush bend ,overflwo arrangeement with specials of standard make and mosquito proopf coupling of approveed municipal design complete including painting of fttings and brackets cutting and making good tha walls and floors wherever required:

Providing and fixing white vitreous china water less urinal of size 60x330x315 mm having antibacterial/germs free ceramic surface fixed with cartridge having debris catcher and hygiene seal.

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass piller taps, 32 mm C.P. brass waste of standard pattern, including painting of fitting and brackets, cutting and making good the walls wherever required

Mirror of actual make with indian Polish of 600x450 mm dia size with beveled adge

C.P. Brass TOWEL rail 820x20 mm togater with pair of C.P. brass brackets of fit the towel Rail

Supply and Fixing wooden Officer time period board Size (1.5x0.50)

Cleaning over flow septic Tank

S/F of Kitchen sink for 600x450x200 i/c waste pipe , west jali etc. i/c fixing & labour T&P

Removing paint or varnish with paint remover or casting soda including supply of all materials labour and T&P SI. No. 657

Painting or varnish two coat on previously painted old wood or iron work with one coat of redimix priming paint and one coat of approved superiar quality redimix paint of varnish including supply of all materials labour and T&P etc SI. No. 641+642

Supply of M.S. angle iron door, ventilator frame made of approved M.S. Iron including drilling holes welding and hinges of required size , nut & bolt etc. as per drawing for proper completion of work at site.

Disposal Malwa

Proving Wooden Computer table

Providing and fixing of 110mmø PVC Rain water pipe

Providing and fixing of PVC Shoe for Rain water pipe.

Providing and fixing of PVC Clamp for Rain water pipe.

Finishing walls with Apex Ultima weather proof exterior emulsion paint of approved make and quality on new/old finished work with two coat to give and even shed including supply of materials, labour and T&P etc required for proper completion of the work.

S/f of 20 mm Plywood ISI marked Both Side Leminated Cabinet with Locking Arrangement i/c nail, glue, thiner, lock, labour T&P etc. (1.80x.60x.60)

M 150 brick work in 1:6 cement and Coarse sand of mortor in foundation in one brick thick wall including supply of all materials , labours and T&P etc. required for proper completion of the work.

R.C.C work with cement approved coarse sand and 20 mm gauge stone ballast in the proportions of 1:1.5:3 in Slab excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. also including supply of all materials,labour and T&P etc. required for proper completion of the work .Binding wire cost being included in the item . SI. No. 284(1)

R.C.C work with cement approved coarse sand and 20 mm gauge stone ballast in the proportions of 1:1.5:3 in Slab excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. also including supply of all materials,labour and T&P etc. required for proper completion of the work .Binding wire cost being included in the item . SI. No. 284(1)

Mild steel or iron in plain work such as reinforced concrete wrought to required same as necessary including bending for proper completion of the work.

15mm thick plaster in 1:6cement mortar over brick work minimum thickness not to be less than 3/6”(12mm) thick including supply of all materials labour and T&P etc. required for proper completion of the work for proper completion of the work but with cement and approved coarse sand in 1:6 cement & fine sand of 1.25 F.M. mortar.in internal

12mm thick plaster in 1:6cement mortar over brick work minimum thickness not to be less than 3/6”(12mm) thick including supply of all materials labour and T&P etc. required for proper completion of the work for proper completion of the work but with cement and approved coarse sand in 1:6 cement & fine sand of 1.25 F.M. mortar.in wall.

Supply of M.S. angle iron door, ventilator frame made of approved M.S. Iron including drilling holes welding and hinges of required size , nut & bolt etc. as per drawing for proper completion of work at site.

Supply of approved M.S. Z section windows and ventilators excluding cost of glass panes but including supply of all materials its fabrication nut & bolt hold fast required complete of all respect at site.

Finishing wall surface with approved make and quality birla White cement based putty 1 mm thick approved brand and making smood surfaces including supply of all material T&P etc required for proper completion of the work

Painting and distempring one priming coat and one coat oil distemper on previously old surface including supply of all material labours and T&P etc. SI. No. 649+650+651

Finishing walls with Apex Ultima weather proof exterior emulsion paint of approved make and quality on new/old finished work with two coat to give and even shed including supply of materials, labour and T&P etc required for proper completion of the work.

Painting or varnish two coat on previously painted old wood or iron work with one coat of redimix priming paint and one coat of approved superiar quality redimix paint of varnish including supply of all materials labour and T&P etc SI. No. 641+642

40 mm C.C. flooring 1:2:4 cement:C/sand and 20 mm stone grit. Excluding base concrete proper completion of work at site.

Fixing Of Glass Strip

Fixing Panes of glass with equal or equivalent I.S.I. marked quality putty brads and springs and including supply of all material and labour etc complete.

Making Parapet Wall230 mm brick work in 1:4 cement and Coarse sand of mortor in s/s Parapet 230mm thick wall including supply of all materials , labours and T&P etc. required for proper completion of the work.

Making Parapet Wall 15mm thick plaster in 1:6cement mortar over brick work minimum thickness not to be less than 3/6”(12mm) thick including supply of all materials labour and T&P etc. required for proper completion of the work for proper completion of the work but with cement and approved coarse sand in 1:6 cement & fine sand of 1.25 F.M. mortar.in internal

Making Parapet Wall Finishing wall surface with approved make and quality birla White cement based putty 1 mm thick approved brand and making smood surfaces including supply of all material T&P etc required for proper completion of the work

Making Parapet Wall Finishing walls with Apex Ultima weather proof exterior emulsion paint of approved make and quality on new/old finished work with two coat to give and even shed including supply of materials, labour and T&P etc required for proper completion of the work.

Electric Work (Labour With Material)

Wiring point for light with 1.5 Sq. mm FR PVC insulated multistrend single core copper conductor cable in PVC conduit with 1.5 Sq. mm FR PVC insuleted multistrend copper conductor cable as earthwire drawn inside modular switch & celling rose angle/ batten holder on 3mm thick phenolic paminated backlite sheet etc.complete in all respect.

Wiring point for fan/fresh air fan (light duty exhaust fan) with 1.5 Sq. mm FR PVC insulated multistrend single core copper conductor cable in PVC conduit with 1.5 Sqmm FR PVC insuleted multistrend copper conductor cable as earthwire drawn inside modular switch & celling rose angle/batten holder on 3mm thick phenotic paminated backlite sheet etc. complete in all respect.

Wiring point for plug with 1.5 Sq. mm FRPVC insulated multistrend single core copper conductor cable in PVC conduit with 1.5 Sq. mm FR PVC insuleted multistrend copper conductor cable as earthwire drawn inside modular switch & socket etc. complete in all respect.

S/W of submain with two number 1.5 sqmm pvc insulated Multi stand Copper Conductor Cable in 20 mm Dia Heavy Duty Condute with 1 no 1.5 SQmm FR PVC Insulated multistand Copper Conductor Cable inside the condute complete in all Respect

S/W of submain with two number 2.5 sqmm pvc insulated Multi stand Copper Conductor Cable in 20 mm Dia Heavy Duty Condute with 1 no 1.5 SQmm FR PVC Insulated multistand Copper Conductor Cable inside the condute complete in all Respect

S/F of hexagonal fan box with hexagonal side of approx 80mm in legnth fabricated from 16 SWG MS sheet incorporating 10 mm dia, MS round bar as per approved complete in all respect.

S/F of 6Amp. To 32 amp. SPMCB (10 KA) Cat - B

S&F of 40Amp DPMCB (10KA) Cat - B

S&F surface/flush mounting 12 ways SPN distribution board with additional metal door with out MCB complete in all respect, as directed at site by Engineer in charge. Cat - B

Supply and Fixing Fan Sheet of Backlight

Supply and Fixing of Ceiling Fan ISI Marked 1200mm sweep.

S/F of electronic fan regulator 120-280 V ISI marked ,on the existing switch board including making connections, required material, labour T/P etc. for proper completion of work to the satisfaction of Engineer in Charge of work.

Supply and Fixing of LED Tube Light with Batton suitable for up to 1x22 watt LED tube light fitting including tube on surface Complete in all respect. CAT - AAA

S&F of Power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable MS box of 175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer

s/f of LED Street light Fitting having dia cast aluminium body diffuser with driver set suitable for 75 watt to 90 watt confirming to IP 66 and above protection complete in all respect. Cat - AA

Supply and Fixing of LED Bulb 9 watt.

JC Company