SPECIAL REPAIR TO BLOCK NO.T-54 (04QUARTERS E,F,G,H) INCLUDING SEWAGE LINE AT MW LINE AND PROVN OF OVER HEAD WATER TANK FOR BUILDING NO T-6 OR MD ACCN AT HANSBERY ROAD OF 512 ARMY BASE WORKSHOP UNDER GE (CENTRAL) KHADKI.

Amount

Taking down chowkats and frame n.exc 1.5 Sqm each including shutters without taking off shutters from the frame and removing from site complete all as specified and directed.

Taking down chowkats and frame exc 1.5 Sqm but n.exc 4.00 sqm each including shutter wiuthout taking off shutter from the frame and removing from site complete all as specified and directed.

Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 sqm each including shutter wiuthout taking off shutter from the frame and removing from site complete all as specified and directed.

Taking down shutter of any description n.exc 1 sqm each and removing to store complete all as specified and directed.

Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 sqm each and removing form site complete all as specified and directed.

Supply and fix Pressed steel frames made of 1.25 mm thick MS Sheet size 125x60mm for doors, ventilator with double rebates including necessary fixing lugs, hinges, lock strike plate etc, Material and labour for providing PCC 1:2:4 type B1 (using 20mm graded stone agg) to fill the frame & making good complete all as specified & directed.

Supply and fix 35 mm factory made shutters of second class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated supplied and fitted to chowkat complete all as specified and directed

Material and labour for 35 mm thick factory made 2nd class hard wood glazed/gazsed and skelton door shutter, factory made, open rebated and prepared to receive glass/guage etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitred beads for securing glass/guage etc size of member as specified in SSR Part I Section 8 clause 8.24(a) and fixed to chowkat, complete all as specified and directed.

Supply and fix Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed.

Supply and fix Factory Made Solid PVC Moulded Door Shutter with wood free EPS , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, fixing in frame at site complete all as specified and directed.

Supply and fix in repairs 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

Supply and fix 100mm long stainless steel medium weight but hinges for door shutter and frames/welded to frames complete all as specified and as directed.

Material and labour for 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

Material and labour for 150mm long mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

Supply and fix in repairs 150 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor complete all as specified and as directed.

Material and labour for timber, 2nd class WH, plain fillets, square, rectangular or triangular in section, wrought, fixed with screws, sectional area exc 13 cm but n. exc 25sqcm. Including dismantling existing, complete all as specified and directed.

Supply and fix 25mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides both face is covered with deco rative face veneer with lipping/frame to match as in cupboard door shutters complete all as specified and directed.

Supply and fix in repair 18-19mm thick prelaminated particle board prelaminated one side grade 2 quality interior grade commercial type including 6 mm thick teak wood leeping, as in cupboards, kitchen cabinet, pelment box and in similar works complete all as specified and as directed.

Supply and fix continuous (piano) hinges, mild steel, bright finish or electrogalvanised Width of flaps (when open) in 40mm complete all as specified and directed.

Supply and fix in repair 100mm Hasp and staple, safety type, Aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Supply and fix factory made internal PVC door frame of size 50x47mm single revated made out of extruded 5 mm PVC foam sheet, mitre cut at two corners and jointed with 02 Nos of 150 mm brackets of 15x15 mm MS square tube. The two vertical door profiles are to be in forced with 40x20 mm MS tube of 19 gauge through out the frame complete all as specified and directed.

Supply and fix 75mm long stainless steel medium weight but hinges for door shutter and framescomplete all as specified and directed.

Supply and fix aluminium anodised barrel tower bolts of extruded section and fixed 150 mm long complete all as specified and directed.

Supply and fix Aluminium handles 150 mm , fabricated type, anodised, fixed with screws , complete all as specified and as directed.

Supply and fix aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x17.70x1.2mm thick with two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick plain float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc and making good the jambs and painting with existing surface matching complete all as specified and as directed .

Material and labour for Machine cut cudappa stone slab 20-25mm thick as in steps, jambs, pillars, window- cills, cooking platforms, and like over 15mm thick cement screed base in CM (1:4) and jointed in grey cement slurry mixed with pigment to match with shade of slab rubbing, polishing and rounding to edges includimg demolition of existing cill/cooking plat form complete all as specified and directed.

Supply and fix aluminium louvered ventilators of section size 80mmx20mmx1.50mm including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc. making good the jambs and painting with existing surface matching complete all as specified and directed .

Supply and fix for frame work such as grill, grating etc with ends bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed.

Material and labour for preparation of old plastered or unplastered old decorated surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots, moulds , moss efflocerent salts and treading oil and greasy spots and two coats of exterior acrylic paint over a coat of primer on wall complete all as specified and as directed.

Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primere complete all as specified and as directed.

Material and labour for preparing new or previously untreated wood surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

Material and labourfor preparing old wood or wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Removing old tar felt, all loose dirt,old roof tiles,including taking down cement plaster cleaning the concrete surface including removal & cleaning of vegetation, fungus, moss small trees etc from the roof top with wire brush, removing the strips of lightening conductor including refixing the same after repair work and applying neat cement slurry @ 1.5Kg/Sqm complete all as specified and directed.

Material and labour for rendering 15mm thick on existing concrete surfaces of roof in CM (1:4) mixed with water proofing compound @ 3% by weight of cement finishing even and smooth without using extra cement for water proofing treatment over RCC slab by applying oil bound bitumen primer @ 0.25 kg/Sqm and providing and laying 3 mm thick APP modified water proofing memberane of IWL weighing not less than 3.00 kg/sqm, reinforced with non woven polyester reinforcement matt weighing not less than 160 gm/Sqm polyester core, having soften point not less than 150oC, longitudinal tensile strength not less than 650 N/ 5 cm, tearing streangth of 180 N / 5 cm, torch application, with a overlap of 100mm at the sides and 150mm at the ends and sealing and applying a coat of solar reflective aluminium paint @ 0.11 Kg/Sqm on membrane surfaces complete including carrying out 24 hrs ponding test over the complete treatment, all as specified and directed.

Demolition of existing lime concrete of any description and in any position not otherwise specifically provided for, incl removing of debries all as specified and directed .

Material and labour for PCC 1:5:10 type E-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete as sub base of floor complete all as specified and as directed.

Supply & providing water proofing treatment with polymeric standard water proofing membrane, Aquaflex manufactured by M/s Bengal Bitumen, MULTIPLAS STANDARD, manufactured by STP TEXAS Ltd/ Hyperplas manufactured by IWL Ltd having 10 years gurantee for water tightness complete all as specified and described as under:- (a) Preparation of sunken surfaceproviding 10 mm thick rendering in cement mortar 1:4 mixed with WPC @ 2 % by weight of cement and applying one coat of polymeric modified bitumen 85/25 @ 1.2Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/sqm including cleaning surface all as per manufaturer's specification complete all as specified and directed. (b) Supply & providing water proofing with polymeric proofing membran of 3Kg/Sqm HYPERPLAS STANDARD/ MULTIPLAS STANDARD consisting of 100micron HMHDPE film centre core including coating the surface with compatible primer and torch application of membrane with 10cm overlaps as required thereof, complete all as specified and directed. (c) GI pipe 40m bore light grade shall be embedded as outlet at the lowest portion for slope on the wall extending upto at least 450 mm beyond the outer wall

Material and labour for taking down cement of cement lime plaster of any description at any position on brick or stone or PCC block walls, chajja etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed .

Material and labour for rendering 12mm thick on fair faces of brick or concrete surfaces of wall in CM 1:6 complete all as specified and as directed.

Material and labour for 15mm thick cemet plalster in CM 1:4 over wall / concrete surfaces finished even and smooth without using extra cement complete all as specified and directed .

Material and labour for 5mm thick rendering on concrete surface of ceiling in CM 1:3 and rendering is to be finished even and smooth with out using extra cement complete all as specified and as directed.

Demolition of brick /stone walls built in cement mortar incl all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Material and labour for pre cast cement concrete solid block masonry with solid block of the grade C1 (1:3:6) set in CM (1:6) complete all as specified and as directed.

Material and labour for preparation of New plastered wall surfaces and applying 3mm thick wall care putty to get smooth and even surfaces as directed and applying two costs of oil bound distemper complete all as specified and as directed.

Material and labour preparation of old plastered wall/ceilling surfaces and applying 3mm thick wall care putty to get smooth and even surfaces as directed and applying two costs of oil bound distemper complete all as specified and as directed.

Material and labour for two coats of white wash on newly plastered surfaces of walls including preparation newly plastered surfaces all as specified and directed.

Material and labourfor two coat of white wash on walls including preparation of old decorated surface and complete all as specified and as directed.

Material and labour for preparation of old decorated plastered or unplastered surfaces of wall, cornices etc by brooming down or steel wire brushing, scrapping down, smoke soot, moulds, moos efflorescent and trading oil and greasy spots and applying two coat of cement base paint (white or tinned) complete all as specified and as directed.

Material and labour for preparation of new decorated plastered or unplastered surfaces of wall, and applying two coat of cement base paint (white or tinned) over a coat of alkali reistant primer complete all as specified and directed.

Material and labour for applying two coats of white wash on ceiling including preparation of newly plastered surfaces complete all as specified and as directed.

Material and labour for one coat of white wash on ceiling including preparation of old decorated surface and complete all as specified and as directed.

Material and labour for cement concrete type B1 1:2:4 (20mm graded aggregate)as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not proivded for in Item 159, water troughs and the like including weathering, slightly rouinded for chamfered angles and throating, complete all as specified and as directed.

Dismantling existing tanks, exc 500 ltr and n exc 1000 ltr removing to store complete all as specified and as directed.

Supply and fix rotational moulded polyethylene water storage tank consisting of three layer cylindrical vertical with top closed hoisted and fixed in position all as specified and directed capacity 1000 ltrs complete all as specified and as directed.

Supply and fix 20 mm dia gun metal ,globe or gate valves, with iron wheel head , screwed both ends for iron pipe complete all as specified and as directed.

Supply and fix 20 mm dia Ball valves ,high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule complete all as specified and as directed.

Material and labour for taking up or down existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed for 15mm bore complete all as specified and as directed.

Material and labour taking up or down existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed for 20mm bore complete all as specified and as directed.

Supply and fix 15mm bore GI water tubing medium grade galvanised with all fittings and fixed complete to walls and ceilling or laid in floor complete all as specified and as directed.

Supply and fix 20mm bore GI water tubing medium grade galvanised with all fittings and fixed complete to walls and ceilling or laid in floor complete all as specified and as directed.

Refixing 15mm bore old steel water tubing and connection in new or old position (walls, ceilling, floor etc) complete all as specified and as directed.

Refixing 20mm bore old steel water tubing and connection in new or old position (walls, ceilling, floor etc) complete all as specified and as directed.

Supply and fix in repair Bib tap long body cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down , screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed. MAKE :- Prayag Cat Part No :8308

Supply and fix in repair angle cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down , screwed both end for iron pipe or or brass ferrule for 15 mm bpre of pipe complete all as specified and as directed. MAKE :- Prayag Cat Part No :8310

Supply and fix in repair Pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered Hot Or Cold With long screwed shanks and fly nutsscrewed for iron pipes 15mm bore dia all as specified and directed. MAKE :- Prayag Cat Part No :8304

Supply and fix in repairs PVC High/Low level flushing cistern 10 litrescapacity including all fittings I.e float valve, syphon, flush pipe, brackets all as specified and directed by Engr-in-Charge.

Supply and fix Fancy type (in repairs) Stop cock (Concealed) cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule with long shank and cup for 15 mm bpre of pipe complete all as specified and as directed.

Supply and fix in repairs brass CP shower rose 125mm size with swivel joint incl fixing to steel pipe fixed in repairs as directed.

Supply and fix in repair viterious china wash basin white flat back size 450 x 400 mm excluding taps waste chain and plug and porcelain stopper but incl necessary brackets CP wastes and other fittings all as specified and directed by Engr-in-Charge.

Supply and fix in repair vitreous china squatting pan "Orissa" pattern size 580mmx440mm white with integral foot rests including 10ltrs capacity PVC flushing cistern low levl with inlet, ball valve float chain and pull and brackets, flush pipe of polyethylene of low or high density or PVC 32mm dia for low level cistern all as specified

Supply and fix, in repair kitchen sink with drainage board made out of 1mm thick stainless steel with plugs, washers & wastes including CI cantilever bracket & connection union to pipe over all size 915mmx460mm & bowl size 410 x330x160mm complete all as specified and as directed.

Supply and fix 32 mm bore PVC waste pipe of approved make suitable for WHB, Urinals etc all as specified and directed.

Supply and fix PVC floor trap square type with CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified and as directed.

Supply and fix PVC connections 15mm dia with brass nut on both ends and washers 450mm longcomplete all as specified and as directed.

Supply and fix towel rail 450 mm long of PTMT fixed with and including chromium plated brass screw and wooden / plastics cleats ( min wt 170 gms) complete all as specified and as directed.

Supply and fix in repair of 110 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches, floor and wall including taking down old unserviceable pipe any description and any type complete all as specified and as directed.

Supply and fix in repairs PVC (SWR) Pipes single socketed in any length with rubberring joints laid in trenches or in floors and wall 75mm bore including taking down old unserviceable pipe any description and any type complete all as specified and as directed.

Supply and fix 110mm dia (bore of pipe) PVC bends (any radius), diminishing pieces or tapers (larger bore measured) with cement jointscomplete all as specified and as directed.

Supply and fix in repairs PVC (SWR) bends 75mm dia bore any radius with access door complete all as specified and as directed.

Supply and fix in repairs PVC (SWR) branch piece, single (single Y) 110 mm dia equal or unequal complete all as specified and as directed.

Supply and fix in repairs PVC (SWR) branch piece, single (single Y) 75mm dia equal or unequal complete all as specified and as directed.

Supply and fix in repairs 75mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and as directed.

Supply and fix in repairs 110mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and as directed.

Supply and fix in repairs 110mm bore PVC (SWR) vent cowl complete all as specified and as directed.

Supply and fix in repairs 75mm bore PVC (SWR) vent cowl complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any cement mortar complete all as specified and as directed.

Material and labour for 25 mm thick PCC 1:2:4 type B-1 using 20mm crushed stone aggregate as in leveling coursecomplete all as specified and as directed.

Material and labour for screed bed or bedding layer of mortar 15 mm thick average thickness for laying floor finishes in cement mortar (1:4),complete all as specified and as directed.

Material and labour for non skid ceramic coloured tiles joint free, 7 to 8 mm thick (square or rectangular) area of each tile exe 0.18 (400X400X7mm) Sqm but n.exe 0.38 Sqm, laid in floors set and jointed with neat cement slurry including pointing in white cement with pigment to match the shade of tiles, complete all as specified and as directed.

Material and labour for Non skid ceramic coloured tiles joint free 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm (400X400X7mm) in skirting, over 10mm thick screed bed in CM 1:4 on walls set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and as directed.

Supply and fix coloured non skid ceramic tiles 300 mm x 300 mm x 6 to 7mm thick,in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Material and labour Glazed ceramic colour tiles in vertifical surface 450x350x7mm thick with necessary border etc set and jointed in neat cement slurry and pointed in coloured cement to match over including 10mm thick renderting backcoating in cement mortar 1:4 complete all as specified and as directed.

Material and labour for machine cut mirror polish kota stone slab flooring 20-25mm thick over 15 MM thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including round nosing at corners ,providing lines at edge of corners rubbing and mirror polishing complete as specified and as directed.

Material and labour for machine cut mirror polish kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10mm thick cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including round nosing at corners ,rubbing and mirror polishing complete as specified and as directed.

Supply and fix in repairs Stainless steel fancy type curain rod 25 mm including SS brackets, decorative knobs,and including all necessary fittings such as rawl plug screws complete all as specified and directed.

Supply and fix in repairsShelf of PTMT Corner Shelf 8 inch fixed with and including Chromium plated brass screws and wooden / plastic cleats complete all as specified as directed.

Supply and fix in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed .

Demolition of cement concrete (unreinforced) in ground floor or pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Material and labour 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate laid in panels surface finish even and smooth without using extra cement as in plinth protection complete all as specified and as directed.

Material and labour for 100mm thick PCC 1:4:8 type D-2 using 40mm graded aggregate as in subbase over rammed earth complete all as specified and as directed.

Material and labour for 25mm thick crushed stone dust/sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Material and labour for 80mm thick machine pressed glossy finish precast concrete interlocking paver block any shape and size & Colour M-40 grade with grey cement no pigment confirming to IS 15658-2006 complete all as specified and as directed.

Material and labour for preparation of old painted steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamal paint complete all as specified and directed.

Material and labour for Black Marble Work 18 to 20 mm thick (table rubbed and polished ) as in steps , jambs, pillars, window- cills, and like over 15mm thick cement screed base in CM (1:4) including pointing with white cement (1:2) using marble dust with admixture pigment to match with shade of slab rubbing , polishing and rounding to edges includimg demolition of existing cill/cooking platform complete all as specified and directed.

Supply and fix in repair for stainless steel kitchen plate rack SIZE (24"X30"X10") three tire ISI marked, (MAKE: Prayag) including all fittings all as specified and as directed by Engineer-in-charge.

Demolition and breaking up drain pipes (salt glazed ware AC/RCC) set in cement mortar, dia of pipe 150mm complete all as specified and as directed.

Excavating in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth; for foundation etc or for manholes, laying pipes etc and getting out in hard dense soil complete all as specified and as directed.

Demolition of unreinforced cement concrete (below or above GL) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Material and labour for cement concrete 1:4:8 type D-2 using 40 mm graded coarse aggregate in cocrete bed to drain pipes of 200 mm bore including forming cradles complete all as specified and as directed.

Material and labour for reinforced concrete pipes, 150 mm bore, Class NP-2, laid and jointed complete with collars all as specified and as directed.

Material and labour for precast cement concrete 1:2:4 type B-1 (using 20 mm graded coarse aggregate) in cover slab set in CM 1:6 complete all as specified and as directed.

Material and labour for mild steel TMT bars 6 mm to 8 mm dia, cut to length, bend to shape required, including cranking, bending and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.

Demolition of reinforced cement concrete manhole covers n exc. 15cm thickness below or above ground level complete all as specified and as directed.

Surface dressing n exc 15 cm deep in soft loose soil and getting out complete all as specified and as directed.

Excavation in post holes hard/dense soil each n exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n exc 25cm, watering, and removing surplus soil to a distance n exc 50m and making good complete all as specifed and as directed

Material and labour for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in fdns, boundary pillars, post incl caps & base etc complete all as specifed and as directed

Supply and fix 15mm GI tubing medium grade, with all fittings fixed to walls and ceiling or laid in floors incl cutting through walls, floors etc incl taking down the same in repairs complete all as specified and directed .

Supply and fix 20mm GI tubing medium grade, with all fittings fixed to walls and ceiling or laid in floors incl cutting through walls, floors etc incl taking down the same in repairs complete all as specified and as directed .

Supply and fix in bib tap, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm bore complete all as specifed and as directed.

Supply and fix 3 layered rotational moulded polyethylene water storage tanks capacity 500 lit in white colour ( cylindrical vertical with closed top ) hoisted and fixed in position all as specified and directed.

Supply and fix for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410 -W (Gde-E- 250) quality-A etc complete all as specifed and as directed.

Mild steel, plain, black sheet 1mm thick in wall cladding, steel gates and similar work, cut to size,holes punched; including round headed screws, clout nails or rivetsand fixed to wood or steel framing with plain 40 mm lap jointswith riveted or weldedseams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed .

Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed .

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and as directed .

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed .

Taking down copper/aluminium point wiring ( light, fan, socket, power ) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately ) and making good disturbed surface of walls, floors, etc complete all as specified and as directed .

Material and labour for Point wiring complete with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLSH cable 1100 Volts grade drawn through in and including PVC casing caping of required size with all fittings and accessories alongwith green colour FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealled box for mounting of switch, regulators or bell push and casing caping terminal box for mounting ceiling rose/ holders etc complete all as specified and as directed . for the following: Make of cable :- Havells/ KEI/Polycab (a) One light point /fan/Ex fan/bell point controlled by one switch

For one 3/5 pin socket outlet 5/6 Amps on the same board with other switches with cable of size 1.5 Sqmm nominal area complete all as specified and as directed.

For one 3/5 pin socket outlet 5/6 Amps independent board with cable 1.5 Sqmm nominal area complete all as specified and as directed .

For one 3/6 pin socket outlet 15/16 Amps independent Board with cable of size 2.5 sqmm nominal area complete all as specified and as directed .

Material and labour for submain wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 2.5 sqmm (Nominal area) drawn through in and including PVC conduit/casing caping with all fittings and accessories as required at site alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 2.5 sqmm as earth lead and connected to earth dolly and making good to disturbed surfaces complete all as specified and as directed . NOTE :- (a) Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length. MAKE :- Havells/KEI/Polycab

Material and labour for submain wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.0 sqmm (Nominal area) drawn through in and including PVC conduit/casing caping with all fittings and accessories as required at site alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.0sqmm as earth lead and connected to earth dolly and making good to disturbed surfaces complete all as specified and as directed . NOTE :- (a) Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length. MAKE :- Havells/KEI/Polycab

Supply and fix 5 Amp switch Piano flush type single pole one way all as specified and as directed.

Supply and fix bell push, flush type 5 A complete all as specified and as directed.

Supply and fix Lamp holder of PVC/ Polycarbonate type with back plate complete all as specified and as directed.

Supply and fix socket flush type 6 amps, 5 pin, 230v complete all as specified and as directed.

Supply and fix switch piano, flush type single pole, one way 16 Amp complete all as specified and as directed .

Supply and fix socket out let 2 in 1, 3 pin 6 and 16 Amp flush type complete all as specified and as directed .

Supply and fix ceiling rose surface Bakelite three terminal all incl dismentling taking down unsv one complete all as specified and as directed .

Supply and fix Bell, AC 230 V, single pole complete all as specified and directed.

Supply and fix Sheet metal Enclosure SPN 08 way (MCB DB) Double door, 240 Volts AC complete all as specified and as directed .

Supply and fix MCB DB double door 4 way ETPN with 200 Amps rated bus bar 240 volts complete all as specified and as directed .

Supply and fix MCB TPN 40-63 Amps, 415 volt 10 KA complete all as specified and as directed .

Supply and fix MCB, SPN (Double Pole) 32 amps, 240 Volts, 10 KA ‘’C” curve complete all as specified and as directed .

Supply and fix MCB, Single Pole, 5 to 32 amps, 240 Volts, 10 KA breaking cap, ‘’C” curve of complete all as specified and as directed . MAKE :- Schneider / Legrand/ABB or eqvt.

Supply and fixing LED lights fitting 1x 20W, 220V,AC, decorative box type with driver, holder incl LED tybe light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED Light fitting mirror type with high output diffuser 2 feet , 1 X 10 watt 220 V AC decorative type with driver holder and LED lamp, Alluminium housing, including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fix LED lamp 12 watt, CDL, E-27 230V, PF-0.95 (min) complete all as specified and as directed. MAKE :- CG or equivalent to HPL/Havells/ Philips

Supply and fix LED building security light 20 watt, 230V, with lens, PF > 0.95 complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 20mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener complete all as specified and as directed . MAKE :- CG Cat Part No-TRP-415-20-57-SL-LM-NBK or techno commercially equivalent in Philips/Wipro.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed . NOTE :- Old UNSV ceiling fan deposit to MES store

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and as directed .

Supply and fix Metal plug and socket board with MCB SP 16/20 amp, 16 KA incl dismantling taking down unsv one complete all as specified and as directed . MAKE :- Cat Part No- 5078 11 of Legrand or equivalent of Schneider/ABB

Supply and fix in repair fusible plug marked suitable for 25 and 50 ltrs capacity Geysers, complete all as specified and as directed .

Material and labour for Laying in trenches/fixed to wall galvanised steel water tubing 15 mm bore, medium grade with and including all medium grade fittings complete all as specified and as directed .

Supply and fix fancy type chromium plated bib cock 15 mm bore screwed both ends for concealed pipes or union or or fittings complete all as specified and as directed .

Material and labour for Cutting/Chasing and making hole on wall for fixing of exhaust fan of sweep 200 mm and making good to disturbed surfaces complete all as specified and as directed .

Supply and fix Exhaust fan Metal body light duty 300 mm sweep 230 volt AC complete with frame and Louvers incl Mmaking of suitable hole in brick / stone wall for fixing of Exhust Fancomplete all as specified and as directed. NOTE :- Old UNSV Exhaust fan deposit to MES store

Supply and fix Exhaust fan 250 mm sweep made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm incl making of suitable hole in brick / stone wall for fixing of Exhust Fan complete all as specified and as directed . NOTE :- Old UNSV Exhaust fan deposit to MES store

Material and labour for Earthing complete with galvanised steel pipe electrode, 40 mm bore, medium grade, 3 mtr long buried directly and vertically in ground with top edge at ground level after making bore hole of size not less than 300 mm dia and 3.0 Mtr long using suitable mechanical drilling rig (for drilling near the specified bldg), connected with galvanised steel earthing lead of 4mm dia all as shown in Plate No-2, connected to the earthing test point, concrete pit in PCC 1:3:6 type C-2with RCC precast pit cover slab 400mmx400mmx80mm with handle for lifting made out of 8mm dia MS rod, funnel, wiremesh, 15 mm dia light grade GI tubing for protection of GI wire 4mm dia, charcoal and salt in alternate 150mm thick layers around GI earth pipe, including necessary returning filling in & removal all as specified or indicated in SSR Part-I, including testing to achieve earth resistance value as per IS specification on completion.

M/S KISHAN CONSTRUCTION (BID ID -3371652)

Shri Sant Cosntruction (BID ID -3371590)

SAMBHAJI D JARANDE (BID ID -3371446)

Suraj Sukhdev More (BID ID -3371502)

V.R.PRAJAPATI AND CO. (BID ID -3371452)

S M MISHRA (BID ID -3371388)

ShreHari Civil Enginneering and Contractors (BID ID -3371140)