Provn of wire mesh door and box type steel window in OTM Accn of Bn IV under AGE B/R-I at Tibri Mil Stn Gurdaspur.

M&L for 12 mm thick rendering with ready mix mortar on brick work/stone/concrete wall etc. internal surfaces finished even and smooth without using extra cement incl taking down existing plaster of any size incl raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for 15 mm thick rendering with ready mix mortar on brick work/stone/concrete wall, facia, projection etc external surfaces finished even and fair without using extra cement incl taking down existing plaster of any size incl raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for preparation of new plaster surface and applying two coats of Oil bound distemper on wall over a coat of chalk whiteing primer on plastered surface wall complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new plaster surface and applying two coats of cement base paint on wall surface complete all as specified and directed by Engineer-in-Charge.

S&F steel window box type made of ERW tube hollow P section of size 60mmX25mm double rebated outer frame comprising double shutters i.e. guaged skelton & glazed, shutter frame of ERW tube P section size 50mmX20mm with two openable leaf for each shutter consisting two Nos sash bar of T-section 20mmX3mm welded to frame with one vertical mullion of ERW box type T-section of size 60mmX25mm and FI 2mm thick welded/ screwed to frame for fixing of wire gauge including MS guard bars, fittings and fixtures welded to frame/ shutters as given below and all as shown on drg No. CEJZ/TD-1020/08 Sh 1/3 to 3/3 complete incl two coats of painting incl taking down old existing window :- (i) Hold fast,150mm long of flat iron 12mmX3mm- 04Nos per window (ii) Handle of Z section 20mmX25mm,100mm long-01Nos per leaf (iii) MS Tower bolt 150mm long-02 Nos per leaf (iv) Z section 20mmX25mm,100mm long stopper -01 Nos per leaf (v) Cleat 55mm long of hollow square 15mmX12mm -02 Nos per leaf (vi) MS pintol hinges size 75mmx12mm- 2 Nos. per leaf (vii) Making good dismantled portion in PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) for hold fasts (four Nos for each window). (viii) Painting with one shop coat of zinc chromate primer. (Note: Wire cloth, glass shall be measured and paid for separately).

S&F steel window/ ventilator box type made of ERW tube hollow P section of size 60mmX25mm outer frame (single rebated) comprising glazed skelton shutter frame of ERW tube P section including MS guard bars, fittings and fixtures welded to frame/ shutters all as shown on drg No. CEJZ/ TD-1019/08 Sh 1/3 to 3/3 including making good dismantled portion in PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) for hold fasts, painting with one shop coat of zinc chromate primer incl two coat of painting incl taking down old existing window/ ventilator complete all as specified and directed. (Note: Glass/ wire cloth shall be measured and paid for separately).

S&F 3mm thick acrylic sheet transparent glass ordinary quality and glazing with silicon and filling gap with oil putty in squares not exc1.00 Sqm each fix on steel, wooden frame complete all as specified and directed.

Taking down chowkats with shutter exc 1.50 Sqm but n exc 4.00 sqm each (without taking off shutter from the chowkats) complete all as specified and directed.

Taking down shutter of any description exc 1.00 Sqm but n.exc 2.00 Sqm each complete all as specified and directed.

S&F 35 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels on both side Incl 6mm thick lipping/beading fixed with nails on all sides complete all as specified and directed.