SPECIAL REPAIR TO BLDG NO T-6 OF REGIONAL CENTRE ECHS RANCHI UNDER GE RANCHI

Amount

Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges as in roof covering complete all as specified and as directed.

S & F 6 mm thick non asbestos cement fiber sheet corrugated or semei corrugated sheet, fixed with ‘L’ type or ‘J’ type or cranked hook bolts complete all as specified and as directed.

Fixing only 6 mm thick asbestos cement corrugated sheet fixed with ‘L’ type or ‘J’ type or cranked hook bolts complete all as specified and as directed.

Dimantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed

M&L Plain, galvanised, mild steel sheeting 0.63 mm thick as in ridges, hips, valley gutters,chajjas, drip and straight flashings complete all as specified and as directed

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed

M & L for PCC (1:3:6) type C-2,using 40 mm graded stone aggregates as in surface channels and drains complete all as specified and as directed.

M & L extra for forming fair finishing to drain or channel, 30 cm inner girth in cement concrete, with using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters, and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates and wind tie complete all as specified and directed.

Dismantling timber scantling 40 sqcm and over in section in any position as in unframed work including separating serviceable Timber and set aside for reuse complete all as specified and as directed.

M&L 2nd class hard wood in scantling of clean sawn complete all as specified and directed.

All as per item No 12 here in above but except timber complete all as specified and as directed

Dismantling of wall and ceiling board any thickness/description including cover fillet complete all as specified and as directed.

S&F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre, intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre complete all as specified and as directed

M&L 4mm thick non asbestos fibre cement building board of size 600X600 fixed or laid/inserted to timber/GI/Aluminium framework fixed in ceiling flat or sloping complete all as specified and as directed.

S&F non asbestos cement fiber sheet plain building board 4mm th fixed to timber framework with screws in ceiling complete all as specified and as directed

M&L for 2nd class hardwood plain fillets, square, rectangular, bull nosed, splayed, chamfered or rounded on one edge or face in section, wrought, secured with nails or brads of sectional area exc. 3 & not exc 6 sqcm complete all as specified and as directed.

Demolition of brick work masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M & L Brick wk with old size sub class ‘B’ bricks straight or curved on plan exc. 6m means radius, built in CM 1:6 complete all as specified and as directed

M&L Brick work with old size sub class 'B' Brick straight or curved on plain to any radius in half brick thick wall built in cm 1:4 complete all as specified and as directed

Taking down cement plaster of any description on brick or stone walls/concrete surface etc. including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M & L 15mm thick rendering on fair faces of brick work or concrete surface in CM (1:6) , surface finished even & smooth without using extra cement complete all as specified and as directed.

Demolition of cement concrete (reinforcement) of any description and in any positin not other wise specifically provided for complete all as specified and as directed.

M & L for RCC (1:2:4) type B-1using 20 mm graded stone aggregate as in slab supported on wall, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc all as specified and directed.

Use and waste of Form work to flat soffits of suspended slabs, floor slabs, landings and similar work; not exceeding 200 mm thick ( Horizontal or sloping) surfaces finished fair in forms complete all as specified.

M & L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, quality conforming to IS complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area n.exc 1.5 Sqm each and removing from site complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exc1.5 Sqm but n.exc 4.00 Sqm each and removing from site complete all as specified and as directed.

Taking down shutter of any description exc 1 sqm but n exc 2 sqm each complete all as specified and as directed.

Taking down shutter of any description n.exc 1 sqm each complete all as specified and as directed.

S & F for 2nd class hard wood (SAL) plain solid, straight chowkats and frames, wrought framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints supplied and fitted to chowkats complete all as specified and as directed.

M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410-W(Gde E-250) quality-A complete all as specified and as directed

S&F 2nd class hard wood 35 mm thick glazed & skelton door shutter open rebated and prepared to receive glass gauge etc with sush bar edges to framing plain chamfered or receive glass gauge etc with sash bar edge of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of member of shutter as specified in SSR Part-I section 8 clause 8.24 (a) complete all as specified and as directed.

S&F 2nd class hard wood 30 mm thick glazed & skelton window shutter open rebated and prepared to receive glass gauge etc with sash bar edges to framing plain chamfered or receive glass gauge etc with sash bar edge of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of member of shutter as specified in SSR Part-I section 8 clause 8.24 (b) complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (style), with particle board core and 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed..

S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, in opening as per specification and shown on drg in SSR Part-II 2010 complete all as specified and as directed.

S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rails, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement, in the frame at site as per specification and shown on drawing in SSR Part-II (2010) complete all as specified and as directed.

S & F 100 mm Butt hinges medium weight medium cold rolled mild steel complete all as spd and directed by Engr-In-Charge .

S & F 75 mm Butt hinges medium weight medium cold rolled mild steel complete all as spd and directed by Engr-In-Charge .

S&F 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F of 150 mm size aluminium handles cast type anodised complete all as specified and as directed.

S&F of 100 mm size aluminium handles cast type anodised complete all as specified and as directed.

M&L Steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dove tailed or welded (including two nos tower bolts 125mm in each leaf and one nos MS flate iron 25x 3mm handle in each leaf complete all as specified and as directed..

M&L Steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay, complete without glazing bars, dove tailed or welded (including two nos tower bolts 125mm in each leaf and one nos MS flat iron 25x 3mm handle in each leaf complete all as specified and as directed.

Hacking out old brocken glass ( any thickness ,size quality or desrp) from old wooden frames /metal frame or stone , concrete or brick surrounds, glazing with putty or fixed with beads complete all as specified and as directed.

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as spd and directed by Engr-In-Charge.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as spd and directed by Engr-In-Charge.

S &F Mild steel sliding door bolts 250mm long , clip and bolt type , stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and two on staple plate and fixed complete all as spd and directed by Engr-In-Charge .

S&F MS ordinary rat tail rod pattern springs 300 mm including roller and roller plate complete all as specified and directed by Engineer -In-Charge.

S & F 3mm thick plain sheet glass ordinary quality & glazing with oil putty n.exc 0.50 Sqm in each pane complete all as spd and directed by Engr-In-Charge .

S&F in repair 20mm MS tube powder coated as in curtain rod incl decorative type bracket fixed to wall complete all as specified and as approved by EIC.

S&F powder coated anodised/aluminium frame of size 65mm x 38mm x 1.00 thick or appropriate section as directed including with frame standard section for sliding type windows /ventilatorss with one or more rebates including joining cleats, beading, handle with locking arrangement, rubber gasket for fixing etc complete with and including 5.5 mm thick tinted glass n.exc 1 Sqm each panes (window of frame 3 tract wt not less than 0.50kg/RM and shutter having wt not less 0.45kg/RM) all as specified and directed

S&F door closer hydraulically regulated, designated No- 2 universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg aluminium (die cast) body complete all as specified and as directed.

S&F floor door stoper of brass body and tongue, anodised with hard drawn steel spring over all length of cover plate 140 mm complete all as specified and as directed.

Dismentaling floor, hearth or wall tiling, including cement mortar bedding (but not backing ) removing serviciable tile to store & rubbish off the permisses complete all as specified and as directed.

M&L, 15mm thick screed bed or bedding layer of mortar in CM (1:6) for laying floor finishes and surface fair and even, complete all as specified and as directed.

M&L vitrifiede tiles of any colour/shade 10 mm thick area of each tile not exceeding 0.36 sqm, in floors/wall etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete all as specified and as directed.

M&L Non - skid joint free Ceramic tiles of any colour/shade 7 to 8 mm thick area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete all as specified and as directed.

M&L Non - skid joint free Ceramic tiles of any colour/shade 7 to 8 mm thick area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete all as specified and as directed.

M & L 10mm thick rendering on fair faces of brick work/concrete surfaces of wall in CM (1:4) for laying wall tiles, surface finished even & fair complete all as specified and as directed.

M&L, glazed ceramic coloured tiles of size 300 X 200 X 6 to7mm thick as in walls etc set and jointed in neat cement slurry and pointed in colour cement to match the tiles complete all as specified and as directed.

S&F for Stonex digital series wall tiles 7 to 8 mm thick (Square/Rectangular) polished, area of each tiles exc 0.11 but not exc 0.18 sqm, in vertical surfaces such as skirting dodo and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed by Engr-in-Charge. Make Johnson (Magic Bricks) or other equilant as approved by the GE.

M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed With grey cement and pigments in neat cement slurry in floors over 20mm screed bed in CM 1:4 complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons complete all as specified and as directed

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for 75mm thick PCC type C2 1:3:6 (using 40mm graded stone agg) as in plinth protection/Path finished the concrete surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L 40 mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in flooring and finised the concrete surfaces even and smooth with using extra cement complete all as specified and directed.

M&L 100 thick Cement concrete type B-2, 1:2:4 (40mm graded stone aggregate) finished cement concrete surface even and smooth without using extra cement complete all as specified and directed.

Supply only Glass dividing strips, 3 mm thick and 38 mm wide inserted in position complete all as specified and as directed

M&L forming contraction joint 30mm deep x 10mm wide filled with sealing compound Grade 'A' complete all as specified and as directed..

Taking up or down 15mm dia steel tubing and connection including cleaning for re-fixing or removal from site complete all as specified and as directed.

S & F 15mm bore galvanized steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors, complete all as specified and as directed.

Refixing old 15mm bore GI tubing medium grade galvanized with new fitting fixed in new or old position complete all as directed complete all as specified and as directed.

Taking up or down 20mm dia steel tubing and connection including cleaning for re-fixing or removal from site complete all as specified and as directed.

S & F 20mm bore galvanized steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors, complete all as specified and as directed.

Refixing old 20mm bore GI tubing medium grade galvanized with new fittings, fixed in new or old position complete all as directed complete all as specified and as directed.

S&F in repair vitreous china pedastal type water closet, white (excluding flushing cistern and flush pipe) but including connection to trap, and to flushing pipe, anti-syphonage pipe etc complete and making good to floor complete all as specified and as directed.

S&F in repair vitreous china squating pan 'ORRISA' pattern, size 580X450mm white with integral foot rest complete including connection to trap and to antisyphonage pipe etc including making good to floor complete all as specified and as directed.

S&F in repair 10 litre capacity PVC low level flushing cistern, white inlet ball valve, float and handle and connection to pipe including bracket complete all as specified and as directed.

S & F in repair vitreous china wash hand basin,counter top oval shape white flat back of size 550 mm x 440 mm including brackets and making necessary arrangement for fixing complete all as specified and as directed.

S&F in repair vitreous china wash hand basin, white, flat back, size 550mm x 400mm excluding taps, chain and plug and porcelain stopper but including cutting for and pinning in ends of and including brackets, waste pipe & CP brass waste coupling of 32mm dia complete all as specified and directed.

S & F in repair Viterous China bowl urinal flat back, size of 465 x 355 x 265 mm white (miniumum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed

S & F in repair Viterous China half stall urinal type white (miniumum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F in repair brass chromium plated wall mixer with hot and cold arrangement, long shank suitable for 15 mm bore of pipe of approved quality as approved by EIC.(make- Essco, cat no MQT-5178 or other equilant make as approved by the GE)

S&F in repair brass chromium plated Basin mixer with hot and cold arrangement, long shank suitable for 15 mm bore of pipe of approved quality complete all as specified and as directed (make- Essco, cat no SQT-516KN or other equilant make as approved by the GE)

Supply only of 15 mm pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

S&F CP soap tray fixed with rawl plugs complete all as specified and as directed

S & F in repair, 15 mm bore bib taps, chromium plated cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repairs stop valve/ angle valve fancy type of 15 mm dia cast copper alloy chromium plated screwed down, high pressure, with crutch or butter fly handle long shank and cup (concealed type) screwed both ends for iron pipes or for unions complete all as specified and as directed.

Supply and fix PVC connections 15 mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repair chromium plated health faucet for EWC with 1 meter PVC tube and hook complete all as specified and as directed

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm incl waste pipe complete all as specified and as directed.

S&F Chromium plated toilet paper holder with flap of standard size complete all as specified and as directed

S&F Glass shelf assembly consisting of 5.5 mm thick sheet glass with CP brackets and CP frame Size 600mm long complete all as specified and as directed (Make : JAQUAR Code. AKP-35771P or other equilant make as approved by the GE)

S&F CP Towel ring, square type including CP screws complete all as specified and as directed (Make : JAQUAR Code. ACN-1121BN or other equilant make as approved by the GE)

S&F in repair brass Chromium plated shower rose 125 mm size with or without swivel joints any size incl fixing of steel pipe or union complete all as specified and as directed

M&L in repairs of Cast iron Nahani trap , Diameter of outlet in 100 mm with grating including jointing to waste pipe fixed in cement concrete typee B1 (1:2:4) complete all as specified and as directed

Supply and fix in repair designer corner glass shelf 25x25 cm with CP steel frame complete all as specified and as directed (Make : JAQUAR Code. ACN-1173 or other equilant make as approved by the GE)

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and as directed

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in treches or in floors complete all as specified and as directed.

S& F 150mm dia Mild steel sheet eaves gutters, glavanised class 3, half rouindd with rounded edges 1.25mm thick complete all as specified and directed by the Engr - in- Charge.

S&F PVC (SWR) 110 mm bore pipe single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed.

M&L Band, Strap, support or stay of flat iron bend to shape including necessary fixing arrangment as in supports for rainwater/eaves gutter complete all as specified and as directed.

M & L for complete removal of existing treatment and applying two coats of oil bound distemper over one coat of primer over one coat of JK or Birla putty on old plastered surfaces of wall including preparation of surfaces complete all as specified and as directed.

M & L applying two coats of oil bound distemper over one coat of primer over one coat of JK or Birla putty on new plastered surfaces of wall including preparation of surfaces complete all as specified and as directed.

M&L, for preparation of new or old decorated surfaces on ceiling brooming down or steel wire brushing, scrapping down smokes soot moulds, moss and efflorescent salts and trading oil and greasy spot & applying one coat of oil bound distemper complete all as specified and as directed.

M&L applying two coats of synthetic enamel paint over a coat of pink primer including preparation of newly wooden surfaces of any description exc10cm width or girth not otherwise described complete all as specified and as directed.

M&L applying one coats of synthetic enamel paint on old wooden surfaces of any description exc10cm width or girth not otherwise described complete all as specified and as directed.

M&L applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surfaces of any description over 10cm width or girth not otherwise described complete all as specified and as directed.

M&L applying one coats of synthetic enamel paint on old steel surface of any description over 10cm width or girth not otherwise described complete all as specified and as directed.

M&L applying two coats of white wash including preparation of newly plastered surfaces of wall complete all as specified and as directed.

M&L applying one coat of white wash including preparation of old plastered surfaces of wall complete all as specified and as directed.

S&F Flat iron hold fast to fixed door/window complete all as specified and as directed.

M&L PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in hold fast block complete all as specified and directed.

Taking down carefully aluminium point wiring any type including battens if any except for ceiling or where not feasible for light/ fan//bell/socket or power and including unscrewing from board, fitting and fixure such as switches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified and as directed

M&L for point wiring with 1.5 sq mm FRLS single core PVC insulated cable 1100 V grade with multistranded copper conductor drawn through PVC casing and capping with all accessories such as screws, plastic gutties, etc. fixed to wall/ roofs/ ceiling etc and incl provision of 1.5 sq mm FRLS PVC insulated and unsheathed copper conductor as earth continuity conductor and connected to common earth dolly including fabricated steel terminal box made out of 1.6 mm thick MS sheet concealed in the wall with 3 mm thick laminated sheet top cover for mounting the switches, socket outlets, fan regulators etc all as specified and directed by Engr-in-charge (a) One light/fan/exhaust fan point controlled by one switch.

All as per item No 120 here in above but One 5 pin 5 Amp switch socket out let point on an independent board complete all as specified and as directed.

All as per item No 120 here in above but One 5 pin 5 Amp socket out let point controlled by one switch on same board complete all as specified and as directed..

All as per item 120 here in before but for one 15 Amp 6 Pin switch socket out let independent with 4 Sqmm FRLS including one run of 4 Sqmm copper conductor as earth continuity wire (Nominal Area) PVC unsheathed copper conductor single core multistranded complete all as specified and as directed. Note : (i) All wiring cable shall be multistsnded FRLSH coper conductor of approved make duly approved by accepting officer befor e incorporating (ii) Colour Code as per IS to be followed for wiring

S & F Switch Modular type 6 Amp single pole one way complete all as specified and as directed Make : Legrand/Havells /C&S/Plaza

S & F socket modular type 5 Amp 5 Pin complete all as specified and as directed Make : Legrand/Havells /C&S/Plaza

S&F Switch socket combinations modular type 2 in 1 3 Pin 5 Amp complete all as specified and as directed Make : Legrand/Havells /C&S/Plaza

S & F Switch socket combination Modular type 6 Pin 15 Ampcomplete all as specified and as directed Make : Legrand/Havells /C&S/Plaza

S & F modular white cover plate with frame,1 module complete all as specified and as directed Make : Legrand/Havells /C&S/Plaza

S & F modular white cover plate with frame,2 module complete all as specified and as directed Make : Legrand/Havells /C&S/Plaza

S & F modular white cover plate with frame,3 module complete all as specified and as directed Make : Legrand/Havells /C&S/Plaza

S & F modular white cover plate with frame,4 module complete all as specified and as directed Make : Legrand/Havells /C&S/Plaza

S & F modular white cover plate with frame,6 module complete all as specified and as directed Make : Legrand/Havells /C&S/Plaza

S & F modular white cover plate with frame,8 module complete all as specified and as directed Make : Legrand/Havells /C&S/Plaza

S&F ceiling rose surface bakelite 65x50mm three terminal AC 230 volts complete all as specified and directed Make :Havells/Plaza/ESS/Kay

S & F for titania LED Tube light (Single side connection) Ultra bright LED tube light (Single side connection) with very high effiency suited for installation in eixting tubelight G13 lamp holders to give glare free cool day light 20W LED with Regal batten for LED tube (single side connection) upto 1x22W LED tube including pre-wired Philips/Surya/Havells/Bajaj ,230 V Energy efficient with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed

S&F for blaze square 18W ultra slim decorative aluminium casted recess mounted square fixture in white finish with opal diffuser and separate electronic driver suitable for low depth ceiling 18W LED 6000K complete all as specified and as directed. Cat part No LHEBMFP71Z2W018 of make Havells or equivalent Bajaj/HPL/Philips

M&L for CFL light fittings, 1x8/9W bulk head luminaires, with lamp holders etc complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 V , 50 Hz including one No 1x8/9W CFL complete all as specified and as directed Make: Philips/Wipro/Bajaj/CG/GE/Havells

M & L for lamp holder, insulated body with back plate batten/angle type for batten fittings complete all as specified and as directed Make : Havells/Plaza/ESS/Kay

S&F in replacement stepped type electronic fan regulator complete all as specified and as directed Make : Legrand/Havells /C&S/Plaza

Taking down and Refixing only ceiling fan and connecting up with round flexible copper conductor Flame retardant PVC insulated and sheathed 3 core multi stranded of size 0.50 Sq mm from ceiling rose to connector of C / Fan complete with testing all as specified and directed by Engr in Charge . Note: Cost of Flame retardant PVC insulated unsheathed multi stranded round flexible copper conductor 1100 V grade 3 Core 0.5 Sqmm from ceiling rose to connector of C / Fan is deemed to be included in the rate quoted.

S&F in replacement of sub main wiring alongwith earth wire with the folowing sizes of FRLS PVC insulated copper 1100V grade conductor, single core cable in surface/recessed as required drawn in and including PVC conduit with all accessores such as saddles, screws etc, 2x6.0 Sq mm +1x 4 .0 Sq mm for earth wire complete all as specified and as directed all as specifed and as directed. Make : Polycab/Havells /C&S/Plaza

Supply and replacing 1100 volts grade heavy duty PVC insulated aluminium conductor, served with inner sheathing of PVC in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension wire, one twin core cable of size 10 Sqmm multi - strand complete all as specified and directed.Make :Polycab/Havells /C&S/Plaza

Taking down MCB DB single pole and neutral upto 8 way with MCBs and keeping aside in safe custody for taking it as schedule of credit, all as specifed and as directed.

S&F sheet metal enclosure fo DBs for using MCBs single pole and neutral 8 Way with 200 amp rated bus bar 240 V double door all as specified and directed Make : Legrand/Havells /C&S/Plaza

S &F Single pole and neutral 63A , 240 V complete all as specified and as directed Make : Legrand/havells/ C&S/ABB/Indoasian

S &F MCB single pole 6 - 32 Amp complete all as specified and as directed Make : Legrand/havells/ C&S/ABB/Indoasian

Supply and fixinig single pole and neutral enclousure with a two pin and earth plug and socket complete with one sing pole MCB 20-32 A complete all as specified and as directed

M& L for earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised earth wire 4mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate No 3 of MES Schdule Part-I connected to earthing point and testing on completion with and including 15mm bore light grade GI protection pipe (upto 7.5 meter beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C-1 with RCC 1:2:4 type B-1, 40mm thick cover reinforced with 8mm dia TMT bars 3 Nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore medium grade GI watering pipe common salt and charcoal filling, necessary excavation and earth work complete

M/S JAI MATA DEE CONTRUCTION CO.

Balaji Construction And Company

K K GUPTA

jai maavindwashni sales & supply