SPECIAL REPAIR TO OFFICERS MESS (BLDG NO, P-31) AT CERTAIN UNIT UNDER GE(NORTH) BANGALORE

Amount

Demolition of for ashlar facings, dressed stonework, precast concrete articles and precast concrete block walling, built in cement mortar complete all as directed.

Excavation in trenches in hard/dense soil not exc 1.5 mtr wide and not exc 1.5mtr in depth ; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth complete all as directed.

Cement concrete 1:4:8 type D2, (using 40 mm graded stone aggregate), as in foundations, filling and mass concrete complete all as directed.

TMT bars 10mm dia and over cut to length bent to shape required, including, cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as directed.

All as per item No. 4 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as directed.

TMT bars 6 to 8mm dia and over cut to length bent to shape required, including, cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as directed

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter for rough finished flat surfaces of complete all as directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions, square, rectangular or polygonal for rough finished flat surfaces of concrete complete all as directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as directed.

Formwork to soffits of suspended slab such as roof slab, floor slab, landing and similar work n.exc 200mm thich(horizontal or slopping) complete all as directed.

RCC 1:1.5:3 (using 20mm graded stone aggregate) as in Footing and plinth beam etc complete all as directed.

RCC 1:1.5:3 (using 20mm graded stone aggregate as in columns, pillars, piers, posts, struts and the like complete all as directed.

RCC 1:1.5:3 (using 20mm graded stone aggregate as Beams, cantilevers, bressummers, lintels over 1.5m span complete all as directed.

RCC 1:1.5:3 (using 20mm graded stone aggregate as in slabs supported on walls, beams, and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as directed.

Precast cement block masonry with solid blocks grade C-5 ,exc 10cm in width and setting in cement mortar 1:6 complete all as directed.

Anti termite treatment to the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the substructure in contact with backfill to be measured) complete all as directed

Anti termite treatment to the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as directed

Anti termite treatment to the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as directed

Anti termite treatment to the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as directed

Providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as directed

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thickness complete all as directed.

Removing excavated material to a distance exc 1.5 km but n.exc 5.0 Km and depositing where directed complete all as directed.

Taking down cement plaster on brick/stone/concrete surface including wall tiling etc and hacking out joints hacking for key scrubbing down with water etc. and disposal of debris outside MD land complete all as directed .

Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete block walling surfaces finished even and smooth without using extra cement complete all as directed.

Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete block walling surfaces with using water proofing compound as per manufacture's instructions finished even and smooth without using extra cement complete all as directed Note :- Waterproofing compound shall be measured and paid separately.

Rendering 5 mm thick on surface of concrete ceiling in CM 1:3 finished even and smooth with out using extra cement complete all as directed.

Preparing newly plastered surfaces and applying two coats of Plastic emulsion paint over a coat of primer over two coats of and white cement putty(minimum 1mm thick) on walls including in narrow width bands cornice spinsters etc complete all as directed. Make of Paint :- Asian Paint (Royal) /ICI(Valvet Touch) or equvalent of Berger Paints.

Preparing newly plastered surfaces and applying two coat of cement based paint over a coat of primer on walls including in narrow width bands cornice spinsters etc complete all as directed.

Preparation of new plastered surface on ceiling and applying three coats of white wash complete all as directed.

Demolition of cement concrete of any description and in any position and otherwise specifically provided for and disposal of debris outside MD land complete all as directed.

Plain cement concrete, 40mm thick, 1:2:4 type B0 using 12.5mm graded stone aggregate as in roof surfaces.complete all as directed.

15 mm thick screed bed in cement mortar 1:4 with using water proofing compound as per manufacture's instructions over the roof slab complete all as directed. Note :- Waterproofing compound shall be measured and paid separately.

Supply only integral water proofing compound complete all as directed

APP modified prefabricated water proofing membrane, 3 mm thick and weighing not less than 3.60 kg/sqm reinforced with non woven polyester matt black finished over compatible primer at 0.40 Ltr/Sqm and torch applications of membrane with 75 mm overlap and 100mm end lap after necessary preparation of surface complete as per manufacturers instructions and applying a coat of solar reflective bituminous Aluminium paint @ 0.10 Kg/Sqm complete all as directed.

Preparing old decorated surfaces and applying one coat of oil bound distemper on wall including in narrow width, bands, cornices, pillasters etc, complete all as directed.

Preparation of old steel surfaces over 10cm width or girth and applying a coat of synthetic enamel paint complete all as directed.

Preparation of old wooden surfaces over 10cm width or girth and applying a coat of synthetic enamel paint complete all as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises by disposing the debris outside MD land complete all as directed.

Vitrified tiles 10mm thick (square/rectangular), light shade, polished, size of each tiles 600mm x 600mm, in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15mm screed bed in CM 1:4, complete all as directed.

Vitrified tiles 10mm thick (square/rectangular), light shade, polished, size of each tiles 600mm x 600mm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 10mm backing coat in CM 1:4, complete all as directed.

Non skid designer collection ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, etc. over and including 15mm thick screed bed in CM 1:4. Complete all as directed. Make: Blanco Nieve/Crema of Kajaria or eqivalent of Rak/Johnson/Somany

Glazed ceramic designer collection tiles in vertical surfaces 350 x 250x 7 mm thick / 450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4 complete all as directed.

Dismantling of ceiling boards any description fixed in any thickness and in any position with screws/ nails including cover fillets/ battens complete all as directed.

Seamless Gypsum ceiling made out of 1800 x 1200 x 9.5mm size board fixed to the ceiling section with 25 mm long self drilling and tapping screws having philips head with under head cutter at 200 mm centre to centre, including finsihing the joint of face board with specially formulated jointing compound and 48mm wide fibre tape to provide seamless finish, including GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two equal flanges of 20 and 30mm andweb of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre /intermediate channel0.9mm thick having two equal flanges of 15 mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasterners with including ceiling section (not exc 1.2 length) of 0.55mm thickness having kurled web of 50mm fixed to the intermediate channel at 457mm centre or as per manufacturer's instructions including 2 coats of plastic emulsion over one coat of primer complete all as directed Make of Paint :- Asian Paint (Royal) /ICI(Valvet Touch) or equvalent of Berger Paints.

All as per item No.46 above but sunk or raised Gypsum ceiling

Granite (of any type) tiles 18-20mm thick machine cut (table rubbed and mirror polished), set and jointed. with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including 15mm thick screed bed in CM 1:4 complete all as directed

Wash basin 56x47x39cms, Cat No: 91075 of hindware or equivalent of /Parryware/Cera including suitable CP waste coupling in repairs complete all as directed

Sensor faucet, Cat No. BSP-17 of Prayag or eqivalent of Hindware/Parryware/Cera including sensor complete all as directed.

Towel rail as per Cat No. BA-20 of Prayag or eqivalent of Hindware/Parryware/Cera complete all as directed.

Touch less vitreous china EWC as per Cat No. 92551(S-22) 70x38x73cm star white of Hindware or eqivalent of Hindware/Parryware/Cera including secsor, plastic water closet seat and connection to drain (or out going pipe) as in repairs complete all as directed.

PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as directed.

110mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joint fixed to wall/floor etc complete all as directed.

75mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joint fixed to floor etc complete all as directed.

PVC (SWR) floor trap 75mm dia of outlet, plain with grating including jointing with solvent cement complete all as directed.

15mm angular stop cockas per Cat No.7810 of Prayag or eqivalent of Hindware/ Parryware/ Cera as in repairs complete all as directed.

Bib tap long body as per Cat No.7808 of Prayag or eqivalent of Hindware/ Parryware/ Cera as in repairs complete all as directed.

PVC connection 15mm size with brass nuts on both ends of length 450mm complete all as directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plaint colour PVC sheet reinforced with MS square tube, and fitted in opening complete all as directed.

Factory made solid PVC moulded door shutter with particle board core 28 to 30mm thick (style) with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, fixing in frame at site complete all as directed.

Butt hinges MS 100 mm cold rolled mild steel powder coated complete all as directed

125mm size aluminium handles, cast type, anodised, complete all as directed.

150 mm size aluminium anodised, barrel tower bolts of extruded section and fixed complete all as directed.

250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as directed.

Dismantling PVC Water Tanks of capacity exc 500 and n.exc 1000 ltrs Capacity and removing to stores complete all as directed.

Taking up or down steel tubing 15mm bore and connections complete all as directed.

Taking up or down steel tubing 20 mm bore and connections complete all as directed.

20mm bore medium grade GI tubing with all fitting and fixed to wall, ceiling or laid in floors etc complete all as directed.

15mm bore medium grade GI tubing with all fitting and fixed to wall, ceiling or laid in floors etc complete all as directed.

Rotational moulded polyethylene water storage tanks (three layer) (cylindrical vertical with closed top) hoisted and fixed in positions all as specified in SSR Part-I, capacity of tank 1000 liters fixed in repairs, complete all as directed.

Gun metal globe or gate valve 25mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as directed.

Gun metal globe or gate valve 20mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as directed.

25mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as directed.

Health faucet of Fancy type CP including two way CP Bib cock & PVC Connecting pipe of length 90 to 120 cm length as per Cat No.BEA-41 & 7812 of Prayag or eqivalent of Hindware/ Parryware/ Cera as in repairs complete all as directed.

Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm fixed with stainless steel wire staples complete all as directed.

Taking down chowkat (without taking of shutter from the frame) not exc 1.5 sqm each including making good the disturbed surface in PCC 1:2:4 type B0 or CM 1:3 complete all as directed.

All as per item No. 78 above but exc 1.5 sqm and n exc 4 sqm each

Powder coated (minimum coating 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as directed.

Powder coated (minimum coating 50 micron) aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised alumnium snap beading, screws etc. complete all as directed.

Powder coated (minimum coating 50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as directed.

Powder coated (minimum coating 50 micron) aluminium Deco grill of No DG-104 as per drg no TD-531 sheet 1/1, (minimum thickness 6mm) shall be reveted to panel of frame using U channel . complete all as directed.

3mm thick pin head type glazing with putty/beading in squares not exc 0.50 Sqm in each pane complete all as directed.

5mm thick sheet glass ordinary quality glazing with putty/beading in squares not exc 0.50 Sqm in each pane complete all as directed.

Hardcore of broken stone or boulder of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as directed.

75mm thcik PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub base of pavement complete all as directed.

Sand filling under floors or in foundation including watering and consolidation complete all as directed.

Rubber moulded Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and no pigment complete all as directed.

Dismantling corrugated translucent sheets in roof coverings, complete all as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.

Rolled mild steel as in roof trusses (framed/unframed) purlins, rafter, trusses, rails and wind tie etc (Tee, Angle, channel or flat sections) including distance pieces etc of grade Fe 410-W complete all as directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as directed.

Preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer over 10cm width or girth complete all as directed.

Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams staircases, landing , chajjas and similar suspended work complete all as directed

Toilet paper with cover, Cat No BA -38 of Prayag or eqivalent of Hindware/Parryware/Cera in repairs complete all as dirceted

Liquid Soap dispenser, Cat No : B-33 of Prayag or eqivalent of Hindware/Parryware/Cera in repairs complete all as dirceted

Glass shelf, Cat No : BEA -45 of Prayag or eqivalent of Hindware/Parryware/Cera in repairs complete all as dirceted

Treating the bottom and sides of exacavation at the rate of 5 Ltr of emulsion per Sqm of surface area complete all as dirceted

Bottle Trap, Cat No : BEA-28 of Prayag or eqivalent of Hindware/Parryware/Cera complete all as dirceted

Sensor operated urinal, starwhite, Cat No 60021 OF Hindware or equivalent make including sensor etc in repairs complete all as dirceted

Taking down carefully aluminium/ copper wiring/power point wiring (light, fan, socket or power) complete including fittings such as switches ceiling roses, regulators, sockets light fittings, fans etc and making good the disturbed surface of walls, ceiling etc including painting with same colour of the back ground complete all as directed.

Wiring complete with 1.5 Sqmm single core FRLS PVC insulated unsheathed cable 1100 volts grade multi stranded with copper conforming to IS 694 drawn through and including non metallic rigid PVC conduit including accessories concealed in walls fixing suitable sunken box and frame cover plate for mounting of modular switches/sockets as required at site, fan regulators etc including 1.5 Sqmm FRLS PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as directed for following

one light point controlled by one switch.

One 3pin socket out let 5 Amps on independent board

One 3pin socket out let 5 Amps on same board

Wiring complete with 2.5 Sqmm single core FRLS PVC insulated unsheathed cable 1100 volts grade multi stranded with copper conforming to IS 694 drawn through and including non metallic rigid PVC conduit including accessories concealed in walls fixing suitable sunken box and frame cover plate for mounting of modular switches/sockets as required at site, fan regulators etc including 2.5 Sqmm FRLS PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as directed (Note:- MS sunken boxes, cover plates, switches, sockets shall be measured and paid separately .)

Note for Item No 103 &104 (i) The earth wire for the points in the same circuit can be looped from point to point (ii) Earth wire shall be taken inside the conduit (iii) MS sunken boxes, cover plates with frame, switches, sockets shall be measured and paid separately

Ceiling rose surface type Bakelite of size 65 x 50 mm, 2 to 3 terminals complete all as directed

Modular type switch 6 Amps, one way complete all as directed .

Modular type switch 16 Amps complete all as directed .

Modular Type Socket outlet, 6 Amps, complete all as directed .

Modular Type Socket outlet, 6/16 Amps, complete all as directed .

Modular Fan regulator Electronic step type complete all as specifed and directed.

LED Batten suitable for indoor application 18 W 6500 K 4ft including connector block complete all as directed . Make:- Wipro Cat No:- LL20-221-XXX-65-NE or equivalent model of Havells/Wipro/Bajaj/Jaguar

LED Batten suitable for indoor application 10 W 6500 K 2ft including connector block complete all as directed . Make:- Wipro Cat No:- LL20-111-XXX-65-NE or equivalent model of Havells/Wipro/Bajaj/Jaguar

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles, check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2010 and as specified or indicated and testing on completion including earth work and excavation in any type of soil PCC (1:3:6) type C1 chamber, pre cost slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia MS bars reinforced at 10 cm centre to centre both ways including funnel with watering pipe wire mesh and lugs, including test point complete all as directed.

Supply only Modular white cover plate with frame and Modular metal flush box suitable for accommodating 02 modular switch/socket etc complete all as directed .

Supply only Modular white cover plate with frame and Modular metal flush box suitable for accommodating 03 modular switch/socket etc complete all as directed .

Supply only Modular white cover plate with frame and Modular metal flush box suitable for accommodating 04 modular switch/socket etc complete all as directed .

Supply only Modular white cover plate with frame and Modular metal flush box suitable for accommodating 08 modular switch/socket etc complete all as directed .

Supply only blanking plate complete all as directed .

Vertical DB TPN Double Door 8 way with IP : 43 protection, isolated neutral bar, having mechanical impact strength IK 08 including all the necessary accessories required to fix it in the Main Distribution Board suitable for incomming MCCB and out going MCBs as in repairs complete all as directed. Make : Indoasian Cat Ref.: 811890 or Equivalent in LEGRAND / HAVELS / STANDARD / BENTEC / HPL

MCB DB SPN 4 way 240 volts with 200 Amps rated busbar double door type for housing MCBs as in repairs complete all as directed.

MCB DB SPN 8 way with 240 volts with 200 Amps rated busbar double door type for housing MCBs as specified and as directed.

MCCB TPN, 415 V, fixed type, 100 Amps with breaking capacity 16 KA as in repairs complete all as directed.

MCB single pole 240 volts 6 to 32 Amps (Curve-C) (ISI marked) as in repairs as in repairs complete all as directed.

MCB single pole and neutral 240 volts 40 Amps (Curve-C) (ISI marked)as in repairs as in repairs complete all as directed.

Sub main wiring 1100 volts grade multistranded PVC insulated FRLS copper conductors two runs of single core 6 sqmm along with 6 sqmm PVC insulated FRLS single core multistranded copper conductor cable as earth continuity conductor run along in concealed PVC conduit including taking down old submain wiring complete all as directed.

Metal clad socket with plug top Including MCB as in repairs complete all as directed. Make: Indoasian Cat Part No DHDPUSN020/DHDPUDP020. or Equivalent in LEGRAND / HAVELS / STANDARD / BENTEC /HPL

XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armouned power cables (heavy duty) with aluminium conductor, 1100 volts grade, cross sectional area 50 Sqmm, 3.5 core laid in trenches including cable lugs and gland complete all as directed

Sand cushioning to under ground cable in layers (8 cm before laying the cable and 15 cm after laying the cable in trenches for cable protection complete all as directed. Note : Punned / completed thickness shall be measure for payment purpose.

Sub class B,with designation 75, burnt clay bricks for cable protection complete all as directed.

GI tubing medium grade 50mm bore with all fitting laid in trenches/walls complete all as directed

High performance IP 66 LED 25 W Building security lights complete all as directed. Make: Bajaj Product Code:- 169821 or Equivalent in Philips/Wipro/Havells

Bracket made out of GI tubing medium grade bore as required to mount the street light, 90cm long including MS Clamps made out of MS flat iron 25 x 10mm, nuts, bolts, washers etc and applying two coats of alumium paint over a coat of red oxide primer complete complete all as directed.

Boring of holes under road,pavement, hard standing by trenchless technique using ultra sounding technique and necessary machine including HDPE pipe of 150 mm dia bore suitable for 0.4 mpa working pressure complete all as directed

Supply, installation, testing & commissioning of 48 V, 3.75 KVA single phase solar power conditioning unit comprising of 9 Nos 325 Wp modules with hot dipped galvanised module mounting structure, low maintenance tubular type lead acid battery bank of 12 V, 150 Ah x 4 Nos @ C10 rate as per BIS specification, solar charge controller cum inverter (full sine wave) 50Hz AC Output, junction boxes, distribution boxes, cables, lugs and other hardware etc. including Integration of various equiptments & components complete all as specified and directed. Make :- Havells/Su-kam/Bajaj/Philips

Recess mounted slim LED Luminaire(2x2) with complete diffuser fitting 36 Watts 6500 K including aluminium frame for POP/Gypsum board as per site requirement complete with all accessories all as specified and directed. Make: Wipro, Cat No : CRCO23R036HP65 or or Equivalent in Philips/Wipro/Havells

Lakkaiah Rangaswamy

MSA Constructions

Pacific Enterprises