REPAIRING AND PAINTING WORKS OF TYPE-VI QTR and UP-GRADATION OF QUARTER GUARD

Amount

Providing and laying cement concrete in retaining walls, return walls,walls (any thickness) including attached pilasters, columns, piers,abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets,sunken floor etc., up to floor five level, excluding the cost of centering,shuttering and finishing : 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from naturalsources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level : Cement mortar 1:4 (1 cement :4 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing of edges to give high gloss finish etc. complete at all levels.

Granite stone slab of colour black, Cherry / Ruby red : Area of slab over 0.50 sqm

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge : Granite work

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,including pointing in white cement mixed with pigment of matching shade complete. (Note: Size of tiles shall be decided by Engineer-in-Charge)

Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).

Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 200x10 mm

Providing and fixing bright finished brass handles with screws etc.complete: 125 mm

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868),transparent or dyed to required colour or shade, with nuts and screws etc. complete :

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm

Providing and fixing aluminium hanging floor door stopper, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. : Twin rubber stopper

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size,complete as per manufacturer’s specification and direction of Engineerin- Charge.

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture.M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel.10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. Anadditional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification &drawing : 30 mm thick pre laminated PVC door shutters

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.

Providing and fixing to existing door frames : 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames.

Providing and fixing to existing door frames : 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge.

Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame,sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.

Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.)

Casement window double panels with S.S. friction hinges (300 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window above 0.75 sqm upto 1.50 sqm).

Casement window double panels with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm & sash / mullion 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of window above 1.50 sqm).

Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately).Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.

Two track two panels sliding door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm)

Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes, shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge : 18 mm thick

Providing and fixing 6mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. on the backing of racks, drawer, cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineerin- charge.

Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineerin- charge.(including providing and fixing auto closing hinges )

Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge : 200 mm

Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge.

Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge.

Providing and fixing 2mm thick 16 to 19mm wide PVC edge binding tape of approved quality for cupboard/wardrobe shutters including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per directions of Engineer- in-charge.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

Size of Tile 600x600 mm

Size of Tile 800x800 mm

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes : 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion : Bend 87.5° : 110 mm bend

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion : Shoe (Plain) : 110 mm Shoe

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete : 110 mm

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.

12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand)

6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work

French spirit polishing : Two or more coats on new works including a coat of wood filler

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour : Two coats

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content : With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Painting (one or more coats) on rain water, soil waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 75 mm diameter pipes

Painting (one or more coats) on rain water, soil waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 100 mm diameter pipes

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge : With cement mortar 1:4 (1 cement : 4 fine sand)

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge : Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : In cement mortar

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead : For thickness of tiles 10 mm to 25 mm

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing 600x120x5 mm glass shelf with edges round off,supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing and fixing soil, waste and vent pipes :100 mm dia: Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989.

Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :100 mm dia pipe

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : For 100 mm dia pipe

Providing and fixing sand cast iron S&S off sets as per IS: 1729 : 114 mm off sets : With 100 mm dia pipe

Providing and fixing terminal guard :100 mm : Sand cast iron S&S as per IS - 1729

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 100 mm dia : Sand cast iron S&S as per IS - 3989.

Providing and fixing heel rest sanitary bend : 100 mm dia Sand cast iron S&S as per IS - 3989.

Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 100x100x100x100 mm : Sand cast iron S&S as per IS - 3989.

Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 100x100x100 mm : Sand cast iron S&S as per IS - 3989.

Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work : 100 mm diameter pipe.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete 10 litre capacity - White

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete : Flexible pipe : 32 mm dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge : 25 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge : Concealed work, including cutting chases and making good the walls etc.

15 mm nominal outer dia Pipes.

20 mm nominal outer dia Pipes.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work : 25 mm nominal outer dia Pipes.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : 40 mm dia nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length : 15 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 : 15mm nominal bore

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.

Providing and fixing PTMT grating of approved quality and colour : Circular type : 100 mm nominal dia. :

Providing and fixing PTMT grating of approved quality and colour : Circular type : 125 mm nominal dia with 25 mm waste hole

Providing and fixing square-mouth S.W. gully trap class SP-1complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Grading roof for water proofing treatment with Cement mortar 1:4 (1cement : 4 coarse sand)

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows &desertory other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (Including cost of M.S hold fast/lugs or SS dash fasteners ). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made : Frame size 65 x 125 mm

Providing and fixing bright finished brass sliding door bolts ISI marked anodised with necessary screws etc. complete : 250x16 mm

Providing and fixing wall hung toilet with quiet -close seat cover in white with specials of standard make and f approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :(Make:- KOHLER Model:-K-26994IN-O or equivalent ROCA /JAQUAR/HINDWARE).

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required :(Make:- KOHLER Model:-K-26994IN-O or equivalent ROCA /JAQUAR/HINDWARE) ; Double bowl Kitchen sink with drain : Overall Size-1550 x 510x1040 mm bowl Size-460 x 400 x 215mm

Providing and fixing pneumatic tank 3/6 L with full fram with specials of standard make and f approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : (Make:- KOHLER Model:-K26353IN-P-NA or equivalent ROCA /JAQUAR/HINDWARE).

Providing and fixing pneumatic faceplate in white with actuation buttom in brushed bronze with specials of standard make and f approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : (Make:- KOHLER Model:-K24151IN-F-BV or equivalent ROCA /JAQUAR/HINDWARE).

Providing and fixing wash basin of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: (Make:- KOHLER Model:-K2215IN-2-O or equivalent ROCA /JAQUAR/HINDWARE) : 581x402 mm undercounter basin in white

Providing and fixing recessed bath and shower trim with diverter in polished chrome of approved quality conforming to IS standards and weighing not less than 690 gms.(Make:- KOHLER Model:-K22541IN-4FP-CP or equivalent ROCA /JAQUAR/HINDWARE).

Providing and fixing bath spout with diverter in polished chrome of approved quality conforming to IS standards and weighing not less than 690 gms.

Providing and fixing single-control wall mount basin faucet trim in polished chrome of approved quality conforming to IS standards and weighing not less than 690 gms.(Make:- KOHLER Model:-K22540IN-4ND-CP or equivalent ROCA /JAQUAR/HINDWARE).

Providing and fixing wall mount kitchen faucet in polished chrome of approved quality conforming to IS standards and weighing not less than 690 gms.(Make:- KOHLER Model:-K-20588IN-4-CP or equivalent ROCA /JAQUAR/HINDWARE)

Providing and fixing shower square size-203mm katalyst rainhead in polished chrome of approved quality conforming to IS standards and weighing not less than 690 gms.(Make:- KOHLER Model:-K-73199IN-CP or equivalent ROCA /JAQUAR/HINDWARE).

Providing and fixing square wall mount shower arm in polished chrome of approved quality conforming to IS standards and weighing not less than 690 gms.(Make:- KOHLER Model:-K-20138IN-CP or equivalent ROCA /JAQUAR/HINDWARE).

Providing and fixing hand shower hose in polished chrome of approved quality conforming to IS standards and weighing not less than 690 gms.(Make:- KOHLER Model:-K-12067IN CP or equivalent ROCA /JAQUAR/HINDWARE).

Providing and fixing hand shower bracket in polished chrome of approved quality conforming to IS standards and weighing not less than 690 gms.(Make:- KOHLER Model:-K-9040IN CP or equivalent ROCA /JAQUAR/HINDWARE).

Providing and fixing square hand shower without hose in polished chrome of approved quality conforming to IS standards and weighing not less than 690 gms.(Make:- KOHLER Model:-K-97009IN CP or equivalent ROCA /JAQUAR/HINDWARE).

Providing and fixing 482mm dual function wall mount rainhead arm in polished chrome of approved quality conforming to IS standards and weighing not less than 690 gms.(Make:- KOHLER Model:-K-26324IN CP or equivalent ROCA /JAQUAR/HINDWARE).

Providing and fixing bath spout with diverter in polished chrome of approved quality conforming to IS standards and weighing not less than 690 gms.(Make:- KOHLER Model:-K-20077IN CP or equivalent ROCA /JAQUAR/HINDWARE).

Providing and fixing angle valve in polished chrome of approved quality conforming to IS standards and weighing not less than 690 gms.(Make:- KOHLER Model:-K-23515IN CP or equivalent ROCA /JAQUAR/HINDWARE).

Providing and fixing 300mm bottle trap in polished chrome of approved quality conforming to IS standards (Code-K-7314IN CP) and weighing not less than 690 gms.

Providing and fixing floor drain in polished chrome of approved quality conforming to IS standards (Code-K-7275IN CP) and weighing not less than 690 gms.

Providing and fixing health faucet with hose & bracket in polished chrome of approved quality conforming to IS standards and weighing not less than 690 gms.(Make:- KOHLER Model:-K-77364IN CP or equivalent ROCA /JAQUAR/HINDWARE).

Providing and fixing double tower shelf in polished chrome of approved quality conforming to IS standards and weighing not less than 690 gms.(Make:- KOHLER Model:-K-25066IN CP or equivalent ROCA /JAQUAR/HINDWARE).

Providing and fixing square soap dish in polished chrome of approved quality conforming to IS standards and weighing not less than 690 gms.(Make:- KOHLER Model:-K-25068IN CP or equivalent ROCA /JAQUAR/HINDWARE).

Providing and fixing towel ring in polished chrome of approved quality conforming to IS standards and weighing not less than 690 gms.(Make:- KOHLER Model:-K-5631IN CP or equivalent ROCA /JAQUAR/HINDWARE).

Providing and fixing tissue holder with cover in polished chrome of approved quality conforming to IS standards and weighing not less than 690 gms.(Make:- KOHLER Model:-K-5633IN CP or equivalent ROCA /JAQUAR/HINDWARE).

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate,suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper condutor single core cable etc required of make Polycab/RR/KEI/Havells..

Group-"A"

Group-"B"

Wiring for twin control point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit,2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required of make Polycab/RR/KEI/Havells..

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required of make Polycab/RR/KEI/Havells..

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required of make Polycab/RR/KEI/Havells..

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required of make Polycab/RR/KEI/Havells/Anchor/L&T.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and drawing following pair 0.5 sq mm FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required : 2 Pair

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required of make Polycab/RR/KEI/Havells/Anchor/L&T..

Supplying and fixing of following sizes of steel conduit along with accessories in surface/ recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required of make Polycab/RR/KEI/Havells/Anchor/L&T..

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required of make Polycab/RR/KEI/Havells/Anchor/L&T..

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required oof make Polycab/RR/KEI/Havells/Anchor/L&T.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required : 1 or 2 Module (75mmX75mm) of make Polycab/RR/KEI/Havells/Anchor/L&T.

Supplying and fixing following modular switch/ socket accessories on the existing modular plate & switch box including connections but excluding modular plate etc. as required of make Polycab/RR/KEI/Havells/Anchor/L&T.

Telephone socket outlet

TV antenna socket outlet

Modular Blanking Plate

Supplying and fixing call bell/Buzzer suitable for 230 volt ac supply etc as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required of make Polycab/RR/KEI/Havells/Anchor/L&T..

Supplying, Installation, testing and commissioning of BLDC ceiling fan, air delivery 220 - 250 m3/min, THD</= 10%, PF>/= 0.94, 28- 32 With minimum 2-3 years warranty including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.(Make:- Atomberg Studio+, Havells Stealth Air & Orient Aeroslim BLDC) : 1200 m.m Sweep

Supplying, Installation, testing, commissioning of single phase 230V, 50Hz regulator of 3 speed position, 400 mm sweep, swinging type plastic body electric wall fan, including wiring with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable (if reqd) as required. ( Make: Atomberg Renesa 400mm BLDC, Havells Platina 400mm & Orient Electric Tornado.

Supplying, Installation, testing, commissioning of fresh air fan with louvers of following sizes in the existing opening including making good the damage, connection, testing, commissioning etc. as required. (Make Havells Vento Jet, Usha Crisp Air Atomberg Efficio & Orient Heavy Duty 450-900 RPM. : 200 m.m Sweep, RPM >/= 1250

Supplying, Installation, testing and commissioning of 18 to 22 watt surface / wall mounted white powder coated CRCA Housing 4 feet LED Batten along with 1 No. LED tube IP 20 with polycarbonate opal diffuser and for providing 2000 or above lumen (>=110 lm/w) with 5200K to 6700K, PF>=0.95, THD<10%, CRI >80 complete with all accessories connected as required.(Make:HavellsModelREGALBATTEN8UPTO01X22WDSBSWHfortube,HavellsModelPHOTONULTRA+1213T8SSTL20WLED865SPC for batten or equivalent model of Bajaj/Wipro/Philips/ Crompton)

Supplying, Installation, testing and commissioning of 12 watt surface mounted square/Round shaped LED ceiling light low glare ,High quality methacrylate opal diffuser & CRCA white powder coated outer ring to give glare-free uniform light distribution.Powered by an independent isolated, SELV output electronic driver.total system lumen of should be 1200 in cool day light above in cool day weight ( 6000 K) power factor >0.90,cr 1>80 LED, lamp efficiency>100 Lm/W suitable for 230 volts 50 Hz AC supply & connection with 1.5 Sqmm FR PVC insulated copper conductor single core cable connection, testing etc. as required(Make-Make: Bajaj Model.BGSLO SLEEK SURFACE 12 WH RD or equivalent model of Bajaj/Wipro/Philips/ Crompton)

Supplying & fixing 1 x10 Watt. CFL/LED decorative wall light fixture made up of Polycarbonate, suitable for 9 W retrofit LED complete with two pin holder, 9 Watt.LED etc. total system lumen of should be 855 in cool day light above in cool day weight (6500 K) power factor >0.90,cr 1>80 LED, lamp efficiency>95 Lm/W suitable for 230 volts 50 Hz AC supply & connection with 1.5 Sqmm FR PVC insulated copper conductor single core cable connection, testing etc. as required. (Make:-Havells.Model:-CITY1 CodeNo:-LHDL02160099/BAJAJ/Cromton/Philps).

Supplying & Fixing surface mounting 1 x10 watt CFL/LED Bulk head in die cast aluminium housing & frosted glass complete with two pin holder, 9 Watt.LED etc. suitable for 230 volts 50 Hz AC supply & connection with 1.5 Sqmm FR PVC insulated copper conductor single core cable etc. as required. ( Make:-Havells Model:-RUGBYor equivalent model of Bajaj/Wipro/Philips/ Crompton)

Supplying and fixing 10 watt LED mirror light with decorative grey end capsAluminum housing & integrated electronic driver suitable for 230 volts 50 Hz AC supply & connection with 1.5 Sqmm PVC insulated copper conductor single core cable etc. as reqd connection, testing etc. as required.(Make: Havells, Model:- LUMILINE Plus or equivalent model of Bajaj/Wipro/Philips/ Crompton)

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) : 8 way (4 + 24), Double door

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

16 way, Double door

8 way, Double door

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB),having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required of make Havells/Polycab/Anchor/L&T/RR Cables/KEI : 40 Amps

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB),having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required : 40 Amps

Supplying and fixing following rating and four poles,240V, Isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required of make Havells/Polycab/Anchor/L&T/RR Cables/KEI: 40 A DP Isolator

Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required : Single pole MCB 5-32 Amps

Supplying & fixing 2 module GI box wih modular plate and cover in front on surface or in recess including providing and fixing 10/25 Amps modular socket outlet including connections, etc. as required.(Havells or equivalent Crabtree/L&T/Anchor/Legrand/Polycab).).

Supplying & fixing 2 module GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 Amps "C" curve, SP,modular MCB, including connections, etc. as required. (Havells or equivalent Crabtree/L&T/Anchor/Legrand/Polycab).)

Supplying and fixing 4 module GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A motor starter with plug top i/c connections testing commissioning etc.as reqd.(Havells SAPcode:-AHLO252504or equivalent Crabtree/L&T/Anchor/Legrand/Polycab).).

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc.conforming to IS 14930, Part II complete with fitting and cutting,jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required : 50 mm dia

Supplying and laying of one number 3.5 X 25 sq mm PVC insulated and PVC sheathed/ XLPE UG power cable, working voltage upto & including 1.1 KV grade with alluminium conductor confirming to IS:7098 (part-I) & IS:1554 (Part-I) and ammended upto date in following way as required of make (Havells OR Finolex/polycab/KEI/RR) : In existing RCC/ GI/ DWC pipe

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

3½ X 25 sq. mm (28mm)

2 X 10 sq. mm (19mm)

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including all accessories with charcoal/coke and salt as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

providing & laying earth connection from earth electrode with 6 SWG dia G.I wire in 15 mm dia G.I pipe from earth electrode as reqd.

Providing and fixing 6 SWG dia G.I. wire on surface or in recessfor loop earthing along with existing surface/ recessed conduit/submain wiring/ cable as required.

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run).

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run).

Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.

Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground/on surface/on wall as required.

RAJ LAXMI SALES AGENCY (BID ID -3240202)

R L SINGH ENGINEERS AND BUILDERS PVT LTD (BID ID -3239388)

K arjun kumar (BID ID -3240104)

GOMTI ENTERPRISES (BID ID -3240162)