Karnataka

Active

Works

Other Works

Beautification of Petekere tank infront of Kanakapuira court in Kanakapura town

Cauvery Neeravari Nigam Limited

CNNL MP Div Ramanagar | MYSORE, Karnataka

Amount: ₹3.8 CrCloses: 8 Jul 2026

Tender Value

₹3.8 Cr

EMD Value

₹5.7 L

Closing Date

8 Jul 2026, 9:30 pm

Similar Past Results

Similar tender results from the same govt authority in the past 3 years.

Tender Inviting Organisation

Name

Cauvery Neeravari Nigam Limited

Work Description

Beautification of Petekere tank infront of Kanakapuira court in Kanakapura town

Tender Information

Tender ID

308688

Reference Number

CNNL/2026-27/OW/WORK_INDENT5225

Tender Type

Open

Product Category

Other Works

Location

CNNL MP Div Ramanagar

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

RequiredKPWD Registration Certificate of class II and above

RequiredAnnual Turnover Certificate issued by CA

RequiredWork done Certificate with year wise executed quantity breakup duly certified by The Executive Engineer

RequiredLine of credit certificate in prescribed format

RequiredExisting commitments & ongoing works details

RequiredTender capacity calculation

RequiredVehicle RC copies and Bills of the equipments

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The Intending bidder are advised to visit the site of work and also access the tender documents well in advance

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Conditional tenders will not be accepted.

The tenderer shall bear all costs associated with the preparation and Submission of his tender, and the employer will in no case be responsible and liable for those costs.

The TENDER PROCEESING FEE will not be refunded.

The CNNL reserves the right of rejecting all or any of the tenders without assigning any reasons,

If the quoted rates for the items fall below the estimated rates, the successful bidder should produce an additional performance Guarantee in the form of Bank Guarantee for the difference amount of quoted rates and estimated rates before executing agreement with CNNL. In case of contractor quoting rate above 125% of the estimated rates, then the amount over and above 125% will be withheld during the progress of work..

The contractor should be registered in respective class Category of KPWD / Any State / Central Government / Public sector organizations

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders

The rates quoted by the contractor must be exclusive of GST and inclusive of sales Tax and any other duties, taxes, etc., The contractor is also required to pay quarry Fees, Royalties, Octroi Dues levied by the state Government or any Local body or an authority and ground rent, if any, charged by the Executive Engineer for stacking materials. No Extra Payment on this account will be made to the contractor.

Materials like steel, cement etc., required for the work shall be procured by the Contractor themselves and should get the same tested by the quality control authority of CNNL before use in this work.

All the formats prescribed in the bid document shall be filled by the bidders in a complete manner. Incomplete formats may constitute sufficient reason at the discretion of CNNL for rejection of the bid

All scanned documents to be uploaded shall be in original and the Executive Engineer will verify the original documents at any stage before recommending for approval.

Further particulars, if any, required by the bidders can be had from the office of the Executive Engineer, Manchanabele Project Division, Ramanagara during office hours on all working days. It may be noted that if any of the calendar of any event mentioned above happen to be General Holiday / Declared holiday, the next working day will hold good for the respective events

The work includes all lead and lift / de-lift and work shall be carried out as per instruction of engineer-in-charge of the work. And all the specification as per Indian road congress and all relevant Indian codes. The rate for the specifications in the Schedule-B includes all lead and lift, irrespective of distance and height

The intending bidders should note that if any of the land either in part / parts or in whole required for the work is not yet acquired by the Nigama, it shall be the responsibility of the bidder to take possession of such land and start the work by obtaining necessary consent of the land owners before commencement of work at no extra cost to the Nigama and no claim what so ever relating to non-availability of land will be entertained. Any delay in obtaining consent of the land owners shall not be considered for any additional compensation.

The undersigned reserves the right to either postpone or to cancel the entire process of tender

If CNNL wishes to engage third party consultants for quality control assessment, apart from the CNNL quality control and field tests, the contractor should co-operate with both Quality control authorities and the third party

Defect liability period will be 3 Years from the date of completion and satisfactory commissioning

Performance guarantee:- For all works an amount equal to 5.00% of the contract value will be withheld as Performance Guarantee Amount till the expiry of the defect liability period

Building and other construction workers welfare cess

The contractor shall subscribe 1.00% of gross amount of each bill payable to him in respect of contract to the building and other construction workers welfare cess as per GO No: LD 300 LET 2006, Bangalore, dated: 18-01-2007. The amount of subscription will be recovered out of payable amount to him in each bill. This component is deemed to have been included in the quoted rate / percentage.

The Tenderer should furnish the Name of the individual / firm/ Company with address and telephone number with place of registration, year of incorporation etc.,

The scanned signature of the bidders / authorized representatives of the bidders shall be attached while uploading the Bid document

The Tenderer should furnish the requisite Earnest Money Deposit

The Tenderer should furnish a copy of the Income Tax Return for the latest financial year

A copy of GST Certificate of the latest financial Year

Employees Provident fund Registration Certificate In respect of Contractors who are not registered with the EPF (Employees Provident Fund) authorities, the contractors should produce an undertaking that he shall within 7 days of the close of every month submit to the Executive Engineer, a statement showing the recoveries of contributions in respect of employees employed are through in and shall also furnish under the provision of the scheme to the commissioner, EPF However, having given an undertaking to this effect if the contractor does not furnish the information, the Nigama will deduct the necessary amount from the amount due to the contractor. Notwithstanding the above, the contractor will be liable for any consequential penalty /damages levied by the EPF authorities

The necessary certificates / documents in support fulfilling qualification criteria stipulated separately shall be scanned and attached to e-procurement document. The original document shall be produced at the time of opening of tender containing the Technical Bid for verification

The Bidder should also furnish the list of work on hand with all details. Such as bid cost, date of entrustment, stipulated date of completion, actual date of completion, completed cost of work, etc

Necessary certificates should be signed by an officer not below the rank of the Executive Engineer

The intending Bidder/firm/company/ should have man power available with him for taking up above work

The intending Bidder/firm/company/ shall provide evidence that the bidder has been actively engaged in the similar nature of work for at least for a period of 5 years prior to the date of submission of application

The intending Bidder/firm/company/ shall provide accurate information on the related application form about any litigation or Arbitration resulting from contracts completed or on going under its execution over the last five years. The consisting history of awards against the tenderer or any partner of a may result in failure of the application

The intending Bidder/firm/company shall provide the audited balance sheets or other financial statements acceptable to the employer for the last five years and must demonstrate the current soundness of the applicants financial position and indicate its prospective long term profitability. If deemed necessary, the employer shall have the authority to make enquiries with the applicants bankers

After award of the work to eligible contractor. Contractor must set up field lab with all required equipment at the site mandatorily

Technical Criteria

Past Experience

Satisfactorily completed (at least 90% of the contract value), as prime contractor, at least one similar work such as Any construction works which includes ornamental fencing of value not less than Rs.191.00 Lakhs Note: Work done certificate issued by competent authority not below the rank of Executive Engineer should be furnished Financial turnover & Work done of previous years indicated above shall be given a weightage of 10% per year to bring them to the price level of 2025-26

Work Done Certificate

Executed in any one year the following minimum quantities of work(1) Size stone masonry 1400Cum, (2) MS Steel (Kg) 77350,Note: Work done certificate with year wise breakup of quantities should be furnished

Work Done Certificate

Capabilities of Vendor

Tenderers who meet the above specified minimum qualifying criteria will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as underAssessed available tender capacity (AxNx1.5-B) Where A Maximum value of civil engineering works executed in any one year during the last five years (updated to 2026-27 price level) taking into account the completed as well as works in progress,N Number of months prescribed for completion of the works for which tenders are invited, B Value at 2026-27 price level, of existing commitments and on-going works to be completed

Others -- Tender Capacity Calculation

List of Key Minimum Technical personal required for the work are as under and should be enrolled in company/ firm/company/ should Employment register and document should be uploaded of Civil Engineer / Diploma holders: Civil Engineering with Min 5 years experience of one No

Others -- Technical person certificates and CV

Each Tenderer should further demonstrate Availability by owning at least 50% of the required following key and critical equipments for this work (b) the remaining 50 % can be deployed on lease/hire for all works provided, the relevant documents (Commitment agreements etc.,) for availability for this work are furnished. The intending Bidder/firm/company/ should furnish details of ownership / lease certificates of the following minimum requirement of machineries, (a) Diesel Generator 25 KV (own / lease) -01No.s, (b) Welding Machine of Suitable capacity (own / lease) 02No.s, Note : The figures mentioned above is indicative, Should there be any change in above quantities the bidder should substantiate the same with calculations

Others -- Vehicle RC copies and Bills of the equipments

Financial Status

Achieved in at least two financial years an average annual financial turnover (in all classes of Civil Engineering construction works) only of Rs.764.00 Lakhs Note : Turnover certificate duly certified by Chartered accountant along with audited balance sheets should be furnished

Audited CA Certificate of Annual Turnover

Liquid assets and /or availability of credit facilities of no less than Rs 115.00 Lakhs (Credit lines/ letter of credit/ certificates from scheduled / nationalized banks for meeting the fund requirement etc.) in the prescribed format

Line of Credit

Others

Not Applicable

Others -- Not Applicable

Not Applicable

Others -- Not Applicable

Not Applicable

Others -- Not Applicable

Not Applicable

Others -- Not Applicable

Not Applicable

Others -- Not Applicable

Not Applicable

Others -- Not Applicable

Not Applicable

Others -- Not Applicable

Not Applicable

Others -- Not Applicable

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹5.7 L

Important Dates

Last Activity

23 Jun 2026

Published

23 Jun 2026

Bid Opening

9 Jul 2026

Download Ends

8 Jul 2026

Pre-Bid Meeting

29 Jun 2026

BOQ Preview

•

Beautification of Petekere tank infront of Kanakapuira court in Kanakapura town

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

•

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...

•

Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential ...

•

Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. 600 x 300 x 1...

•

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

•

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand). complete with all lead and lifts and as directed by the engineer in charge

•

Providing and applying two coats of ready mix paint of approved brand on steel surface after thorough cleaning of surface to give an even shadecomplete with all lead and lifts and as directed by the e...

•

Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfacescomplete with all lead and lifts and as directed by the engineer in charge

•

Removing disturbed rough / size stone revetment 300 mm thick with 150 mm thick 40 mm down aggregate backing and resetting the same using the available stones and aggregate including packing, wedging, ...

•

Providing and constructing 300mm thick dry rubble stone pitching/revetment with pin headers at 2 per sqm including cost of all materials, labour, hand packing, finishing etc., complete with all lead a...

•

Land Levelling ( Upto 0.50m depth ) ; Excavation of soil and Land levelling in red/Black soilscomplete with all lead and lifts and as directed by the engineer in charge

•

Procurement of Ingredients : Procurement of farmyard manure / compost, sand and red -earth (ingredients) required for raising seedlings inclusive of transportation ,breaking of clods, sieving and heap...

•

Lawn Development Procurement of quality lawn grass , C. Mexican Grass, complete with all lead and lifts and as directed by the engineer in charge

•

Planting of shrubs ; Digging pits of size 0.45x0.45x0.45 mfilling 50% of the pit with top soil and remaining 50% of pit with 1:2:3 proportion of sand (0.007), FYM(0.014cm) red earth (0.021cm) and and ...

•

Planting of Trees; Digging pits of size 0.75 x 0.75x 0.75m, filling 50% of the pit with top soil and remaining 50% of pit with 1:2:3 proportion ofsand (0.035cum) FYM (0.070cum) Red earth (0.105 cum) a...

•

Supply of Saplings of plants / shurbs / creepers/ hedgers / Ground cover plants Fox tail palms complete with all lead and lifts and as directed by the engineer in charge

•

Supply of Saplings of plants / shurbs / creepers/ hedgers / Ground cover plants Durantha Mix complete with all lead and lifts and as directed by the engineer in charge

•

Supply of Saplings of plants / shurbs / creepers/ hedgers / Ground cover plants Ficus Black complete with all lead and lifts and as directed by the engineer in charge

•

Supply and erection of 14 Feet Height Street Light Pole 14 Feet Height Street Light Pole on suitable cement concrete foundation with 2.5 Feet height dia 95 mm cast iron decorative round pedestal as pe...

•

Fixing and Wiring of LED Light fitting with suitable clamps Brackets, lamps, Bolts and nuts complete with all lead and lifts and as directed by the engineer in charge

•

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit sho...

•

Supply and fixing of 4Pole Power Contactor With No/NC Contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 125Amps...

•

Supplying and drawing Flexible Multi core Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

•

Supplying of 1.1 KV LT UG cable having aluminium conductor PVC insulated, extruded inner sheathed, galvanised, steel strip (except 2Cx 10Sq.mm wire armoured ) Confirming to IS-3975:1990 ( No. of Strip...

•

Labour charges for Laying of UG Cable in Existing Conduit Pipes (HDPE Pipe) in Concrete Roads/Tender Sure Works complete with all lead and lifts and as directed by the engineer in charge

•

LT AC 3 Phase 4 Wire, 10-60 Amps Smart Energy Meter, Class 1.0 Accuracy with GPRS Communication Module complete with all lead and lifts and as directed by the engineer in charge

•

GI pipe 100 mm (Nominal bore), medium class (including accessories) complete with all lead and lifts and as directed by the engineer in charge

•

Supplying and fixing Microprocessor Based Electronic timer ( without contactor, Din, mounting using necessary bolts , nuts and washers etc.),3-120scec setting complete with all lead and lifts and as d...

•

Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equippe...

•

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.com...

•

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.complete with all lead and lifts and as directed by the engineer in charge

•

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. (40/6.3) GI strip 25x3mm complete with all lead and lifts and as directed by the engi...

•

Telescopic Ladder Aluminium : 6 m height. complete with all lead and lifts and as directed by the engineer in charge

•

Fabrication, Supplying, Erection,Testing and Commissioning of.ms long Polygon highmast with Single /Multiple telescopic section shaving,(minimum overlap distance of 1.5 times of top section) thickness...

•

Supply of LED pole mounting type post top latern with presure dia cast aluminium housing body for optimal thermal dissipation. Lamp compartment comrising of anti glare clear disffuser with Injection m...

•

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

•

Supplying and fixing o fLED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.complete with all lead and lifts and as directed by the engineer in charge

•

Supplying, fixing and wiring Electronic Trivector Meter (ETV )5 to 32/63A threephase 4wire whole current class-1Accuracy Energy Meter. complete with all lead and lifts and as directed by the engineer ...

•

Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

•

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

•

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...

•

Providing and fixing MS Casing collars as per IS1239(part-II) 1982 with all latest amendments if any dia. The thickness of plate used forcovering one end shall be 3mm(minimum). The dimensions of cap a...

•

Providing and laying at site of work MS casing caps as per IS 1239 (part II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum)...

•

Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per ne...

•

Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar...

•

Supply and delivery at site wrought middle steel (galvanized) GI elbow confirming to IS 1239-II, 1991 with latest amendments if any for:50mm dia complete with all lead and lifts and as directed by the...

•

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments. 50mm dia complete with all lead and lifts and as directed by the ...

•

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x4 S...

•

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...

•

Fabricating supplying and mounting MS box made out 16 SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped ...

•

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...

•

Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipments including providing cement concrete foundation bed etc., com...

•

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick G.I. Pipe 2.5mtr long burried in a pit. The pit shou...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

5225 KW4.docx

Tender Document • 6.95 MB

Ready to Participate?

Download all tender documents and submit your bid