Govt. Swaran Jayanti Utkrisht Vidyalaya in Govt. Sr. Sec. School Gullarwala District Solan HP Sub Head Painting and Whitewashing, Co 1 No. Entry Gate

Amount

Erection

Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade. Old work (one or more coats) including carriage of material in all leads & lifts. Approved Make of Asian Paint./Nerolac/Shalimar/Berger.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer including carriage of material in all leads & lifts.Approved Make of Asian Paint./Nerolac/Shalimar/Berger.

Finishing walls with water proofing cement paint of required shade including carriage of material in all leads & lifts.Approved Make of AsianPaint./Nerolac/Shalimar/Berger. Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat

Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade including carriage of material in all leads & lifts .Approved Make of Asian Paint./Nerolac/Shalimar/Berger. New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m² including carriage of material in all leads & lifts Confirming to BIS Specifications.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required including carriage of material in all leads & lifts. TATA make RINL/SAIL (Approved make) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and fixing of 40 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts, G.l. limpet and bitumen washer complete, bent to shape and fixed in wall with cement mortar 1:3 (1 cement : 3 coarse sand).1.00 mm thick with zinc coating not less than 275 gm/m² including carriage of material in all leads & lifts

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6mm for diagonal braces and central cross piece including carriage of material in all leads & lifts

Lettering with black Japan paint of approved brand and manufacture including carriage of material in all leads & lifts.Approved Make of Asian Paint./Nerolac/Shalimar/Berger.Confirming to BIS Specifications.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, upto all lift/depth /height including getting out the excavated soil and disposal of surplus excavated soil as directed, upto all leads & lifts. All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1 :5:10 (1 cement : 5 coarse sand): 10 graded stone aggregate 40 mm nominal size) including carriage of material in all leads & lifts .

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) including carriage of material in all leads & lifts .

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metre lead including carriage of material in all leads & lifts.

Providing and laying vitrified floor tiles in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of material in all leads & lifts .600x600mm Approved make of Kajaria/Orient/Somany/RAK/Nitco etc.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S.15622, of approved make, in all colours & shade, in skirting, riser of steps, over12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing withgrey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete including carriage of material in all leads & lifts .600x600mm Approved make of Kajaria/Orient/Somany/RAK/Nitco etc.

HARDEEP SINGH

Bhupinder Singh

Balbir Singh