GRAM FATEHULLA GANJ KE GATA NO- 42 RAKBA 0.2430 HACTARE, SHRENI 5(3)(D) BANJAR BHUMI PAR WET WASTE PROCESSING UNIT FOR 5 TON KA NIRMAN KARYE.

BOQ Items :

Surface dressing of ground or Cleaning Jungle including up rooting of trunk vegitations grass bush wood trees and sapling of girth up to 30cms measured at height of 1mtr above ground level and removal of rubbish up to distance of 50mtrs out side of periphery of area cleared. S.I No-259

Earth work in exacavation in trenches for foundations in ordinary soil (loam clay or sand) including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the Engineer i/c with in a lead of 50m. [PWD-251]

Excavating, supplying & filling of local earth excluding royalty & including cartage up to 5km also including ramming & watering of earth in layers no exceeding 20 cm in trenches, plinth, side of foundation etc complete S.I. No. 253a

Providing & Laying P.C.C. 1:6:12 with 40 mm. brick ballast sand cement etc complete S.I. No. 273

R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:2:4 in lintels of doors and windows,sunshades excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. S.I. No. 283 (for RCC Raft, Column & Beams)

P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. [PWD- 504]

Class M-150 brick work in 1:6 cement coarse sand (of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work. PWD-303

Class-150 brick work in 1:6 cement and Coarse sand mortar in Super structure including supply of all materials, labour tools and plants, etc. required for proper completetion of the work. [PWD-303+309]

12mm thick plaster with (1:4) one part of cement and four part of approved coarse sand including supply of all labour, material, T&P etc complete. S.I.No. 584

M.S. or Iron work of small sizes and sections such as holding down bolts, hold fast tie rods, gratings etc. wrought to required from including supply of steel bolts, nuts wastage etc and fixing required for proper completion of the work. S.I. no. 502(b)

M.S. or Iron work in heavy sizes such as, built up gate, door frame, record racks, roof work etc. wrought to required from including drilling holes, rivetting or welding where necessary and also including supply of steel bolts, nuts wastage etc and fixing required for proper completion of the work. [PWD- 503]

Supply and fixing galvaniesed corruated iron roofing 24 B.W.G. in position including supply of all material,labour,tools & plants etc. required for proper completoin of the work and including wastage. PWD-536

Supply & Fixing 6mm thich china glazzed tiles of first quality in skirting & dado laid with 1:3 cement & aproved coarse sand mortar finished with white cement slurry jointing & polishing complete including supply of all material T&P etc require for proper completion of the work. (628)

Finishing walls with water proofing cement Weather coate of approved quality on previously new treated surface with this paint to give in even shade including supply of material, labour, T & P, etc. required for proper completion of the work. S.I.(Ch.15.New Item 9)

Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. (PWD 649+650)

Providing wall putty on new surface with approvel quality material of Berger/JK/Brila or similar make two coates S.I.No(Ch.15.New Item 12)

Fixing of Door, windows/ventilators chaukhats in position.

Supply and fixing ISI marked flush door shutters conforming to IS :2202 Part I (1983) including fixing of wooden cleats , stoppers, adjustment of hinges bolt lock handles spring fiting with necessary screws to be supplied. (a) 32 mm thick PWD-470(i)

Providing and fixing 28mm thick door shutters made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71mm width & 28mm thick as vertical & horizontal styles. Joint are made using solvent adhesive.(PWD-9.124)

Providing & fixing aluminium sliding door bolts ISI marked with nuts and screws etc complete. (a) 250mm x 16mm . PWD-9.96.2

Providing and fixing aluminium towerbolts (barrel type) with necessary screws etc. complete

Providing and fixing aluminium handles with screws etc. complete (a) 125 mm PWD-9.100.1

Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. For Wooden Surface. (PWD-ch-15.1b+2)

Supply & fixing 10 cm internal dia PVC pipe down pipe

Supply & fixing 7.5 cm internal dia PVC pipe down pipe

Wiring point for light in PVC conduit on surface , complete with 8 SWG GI earth continuity wire , switch and ceiling rose /angle/ battan holder on 3 mm thick phenolic laminated backelite-sheet etc complete in all respect, with 1.5 Sq mm FR PVC insulated multistrand copper conductor cable as earth wire drawn inside the conduit (As per PWD S.I No 121 (B)

Wiring point for plug in PVC conduit on surface , complete with 8 SWG GI earth continuity wire , switch and ceiling rose /angle/ battan holder on 3 mm thick phenolic laminated backelite-sheet etc complete in all respect with 1.5 Sq mm FR PVC insulated multistrand copper conductor cable as earth wire drawn inside the conduit (As per PWD S.I No 124(b)

Wiring point for fan/fresh air fan in PVC casing & caping used in place of PVC conduit on surface , complete with 8 SWG GI earth continuity wire , switch and ceiling rose /angle/ battan holder on 3 mm thick phenolic laminated backelite-sheet etc complete in all respect with 1.5 Sq mm FR PVC insulated multistrand copper conductor cable as earth wire drawn inside the conduit (As per PWD S.I No 123©

supply & Fixing LED Light 18w standard make all fitting complete. (M.R.)

supply & Fixing LED Light 12w standard make all fitting complete. (M.R.)

Providing and fixing water closet squatting pan ( Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS:7231, Parryware/Hindware/Seabird/Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. PWD-17.1 White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests PWD-17.1.1

Providing and fixing white vitreous china flat back half stall urinal of size 430x260x350mm & 340x410x265mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required: Range of Two half stall urinals with 5 litre PV.C. automatic flushing cistern. PWD-17.4.1

Providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50cm deep and 1.8cm thick fixed in Urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1cement: 2coarse sand: 4graded stone aggregate 6mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade (8.10.2)

Providing & fixing white vitreous china wash basin including making all connections but excluding the cost of fittings. Flat back wash basin of sze 550x400(S.I.No. 17.25.2)

Providing and fixing brass bib cock of approved quality . a) 15 mm nominal bore (18.15.1)

Providing and fixing brass stop cock of approved quality . a) 15 mm nominal bore (18.15.1)

Providing & fixing C.P brass angle valve of approved quality 15mm dia nominal bore. (S.I.No. 18.53.1)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. DSR 2021-18.2 15mm dia outer dia pipes (Rate=513.75-513.75*18%=421.28)

20mm dia outer dia pipes (Rate=537.15-537.15*18%=44.46)

20mm dia outer dia pipes (Rate=327.2-327.2*18%=268.30)

25mm dia outer dia pipes (Rate=429.4-429.4*18%=352.11)

Supply & Fixing 25mm PVC pipe in position all coplete.

Providing & Placing on terrace (at all floor levels) polyethylene water storage tank ISI 12701 maked with cover and suitable locking arrangement and making necessary hole for inlet,outlet and over flow pipe but without fitting & base support for tnak. (S.I.No. 18.48)

Cartage of material & all T&P etc. required for proper comletion of work Including loading unloding & proper Stacking.

(a) Handpump Machine set complete.

(b) 110mm.PVC pipe 6Kg/Sqm pressure

© 63mm.PVC pipe 6Kg/Sqm pressure

(d) Supply of medium class G.I. Pipe 32 mm B class

Providing Necessary boaring T&P including making arrangement of water for boring of 150mm Dia bore by palm pressure method In all type of strata---- complete item AcordIng to Moradabad jai nigam 2012-13 0-30

PVC assembly which loaring PVC pipe and strainer of 110/63mm dia blind pipe strainer. 0-30

(a) Supply & pouring of coarse sand arround strainer in drilling i/c all

(b) Filling work of betonite in between housing pipe and bore hole.

Installation of haondpump India Marka-2 including with riser

Devolepment work till satisfaction of engineer incharge after Installation of haondpump.

Disinfection work with material after development work.

Construction of handpump platform of 1.85m dia including all material ,labours T&P etc asper design.

Construction of drain including all material ,labours T&P etc asper design.

Imbosing & Painting work work

Water Testing work

Solvent & jointing kit

Supply of 1.5 HP. Submersible pump ISI. Marked or approved quoin as Taxmo,Crompton etc. required for 4' boring ,.complete Item..

Supply of starter with pannel' Board.

Supply of flate cable 3core copper 1.5 square mm for summerseble electric connection…… Complete Item.

M/S MOHD YAMEEN THEKEDAR

AVNISH KUMAR SHARMA

M/S SALEEM AHMAD THAKEDAR