PROVN OF TYPE B ECHS POLYCLINIC BUILDING AT OD SHAKURBASTI UNDER GE NORTH DELHI CANTT

Amount

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Removing excavated material (soil) exc 250 mtr but n exc 500 mtr and depositing where directed.

Excavation in trenches n exc 1.5 m wide and n. exc 1.5 m in depth; for foundation n exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil.

Excavation in trenches exc 1.5 m wide and n. exc 3.0 m in depth; for foundation n exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc 25 cm in soft/loose soil.

M&L for cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in CM (1:6), complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall in cement mortar 1:4 coplete all as specified and directed.

M&L Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (500mm below the ground level) complete all as specified and directed.

M&L Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.

M&L Treating the soil under plinth protection at the rate of 5 liters of emulsion per square metre of surface area complete all as specified and directed.

M&L Treating the soil along with external perimeter of building at the rate of 2.25 litres of emulsion per metre of the perimeter wall complete all as specified and directed.

M&L for 15mm thick rendering Ready mix plaster CM on external surfaces of brick work or concrete surfaces complete all as specified and directed.

M&L for 15mm thick rendering Ready mix Plaster CM on internal surfaces of brick work or concrete surfaces complete all as specified and directed.

M & L for 5 mm thick rendering Ready mix plaster CM (1:4) on ceiling, complete all as specified and directed.

M&L preparation of newly plastered surface on walls and applying two coat of Oil Bound Distemper over a coat of primer and Putty complete all as specified and directed.

M&L three coats of white wash on newly plastered surfaces as in ceiling including preparation, complete all as specified and directed.

Material & Labour for preparation of new surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as specified and directed by Engr-in-charge.

M&L for broken stone or boulders hardcore of gauge n. exc. 63 mm, deposited, spread and levelled in layers n. exc. 15cm thick, watered and rammed to a true surface.

M&L for 100mm thick cement concrete type D-2 1:4:8 (40mm graded agg) as in sub floor; complete all as specified and directed.

M & L for sand filling under floors or in foundations including watering as required all as specified and directed by Engr-In-Charge.

M&L for 25 mm thick cement concrete type B-0 (1:2:4) using 12.5mm graded stone aggregate as in levelling course, complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n. exc. 0.18 sqm, as in floors set and jointed in neat cement slurry and pointed in coloured cement over and including15mm thick screed/bedding layer in CM (1:6), complete all as specified and directed.

M&L for glazed coloured ceramic tiles of size 450x350x7mm thick on vertical surfaces such as skilting/dado over 10mm thick rendering in CM (1:4), complete all as specified and directed.

M&L Vitrified ceramic tiles 10 mm thick square/rectangular light shade texture polished,area of each tiles Not exceeding 0.36 sqm,in floor etc set and jointed with neat cement slurry and pointed with white cement mixed with pigment to match the colour of the tile including 15mm thick cement mortar screed bed in CM (1:6) complete all as specified and directed.

M&L Vitrified ceramic tiles 10 mm thick square/rectangular light shade texture polished area in vertical surfaces as skirting/dado of each tiles Not exceeding 0.36 sqm,in floor etc set and jointed with neat cement slurry and pointed with white cement mixed with pigment to match the colour of the tile including 15mm thick cement mortar screed bed in CM (1:4) complete all as specified and directed. complete all as specified and directed.

M&L 20mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in screed bed or bedding layer of 20mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite.

S&F 3mm thick steel glass ordinary quality and glazing with oil putty in squares area not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

M&L synthetic enamel paint on newly steel surfaces two coats including primer and preparation, complete all as specified and directed.

S&F factory made solid panel PVC door shuter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails & MS frame shall be covered with heat moulded plain colour PVC `C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement of stiles and plain colour PVC sheets for top rail,lock rail & bottom rail, on either side & as gap insert for top rail & bottom rail & panelling of plain colour PVC sheet to be fitted in the MS frame welded/Sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per complete all as specified.

S&F solid PVC door frame of size 50 mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, in opening as per specification & drawing.

S&F Rolled mild steel Framed work ~Fe-290 - (Gde-E-165) such as grills,gratings,etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, framework of water tanks and similiar works complete all as specifed and directed.

S&F35 mm thick 2nd class hardwood plain framed panelled shutters (any number of panels) with panels of timber flat on both sides(feathered edge), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkhats complete all as specified and directed.

M/L preparation of new wooden surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of primer all as directed and specified.

S&F aluminium handle cast type anodized 150mm, complete all as specified and directed.

S&F 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed.

S&F aluminium anodized barrel tower bolts of extruded section of length 150mm and fixed with cadymium plated wood series, complete all as specified and directed.

S&F aluminium alloy anodized sliding door bolt 300mm with hasp staple, complete all as specified and directed.

Supply and fix door closer hydraulically regulated,of aluminium(Die cast) body universal type suitable for door shutters 851 to 1000mmin width and weight between 38 to 60kg of Hydraulic door closer complete all as specified and directed.

S&F GI tubing 15mm bore medium grade with all fittings and fixed complete to wall, ceiling or laid in floors of , complete all as specified and directed.

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Slidingmesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm),Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) Area not exceeding 2.00 sqm each

M&L for cutting chasses for concealed water tubing of 15mm dia and making good by cement mortar 1:3, complete all as specified and directed by Engr-in-charge..

S&F GI tubing 20 mm bore medium grade with all fittings and fixed complete to wall, ceiling or laid in floors of , complete all as specified and directed.

Supply only 10 Ltrs capacity PVC low level valve less flushing cistern (white) symphonic action type with all fittings such as inlet ball valve float and handle and flush pipe of polythene including brackets, complete all as specified and directed.

S&F Vitreous China wash down water closet pan (pedestal pattern), white(including fixing bolts, flushing cistern & flush pipe) incl black seat cover all as spd and dir.

S & F 32 mm dia Flush pipe of polyethylene of low or high density of PVC for low level cistern etc complete all as specified and directed.

S&F PVC connection 15mm dia 450mm long with brass coupling/unions on both ends suitable for flushing cistern and WHB, complete all as specified and directed.

S & F fancy type, chromium plated, long body, bib taps, 15mm bore with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule and fixed complete all specified and directed.

S&F angle valve cast copper alloy C.P 15mm bore screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union all as directed and specified. (Make :-Hindware or eq,).

S&F vitreous china wash hand basin with stand white flat back of size 550x400mm including cutting for and pinning in ends of brackets, PVC flexible waste pipe 32mm dia, brass chromium plated waste fittings etc complete all as directed and spcified.

Material and labour for plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate, 75mm thick as in plinth protection/pavment and the like, finish the surfaces even and fair without using extra cement all as directed and specified

S&F PVC water tanks 500 ltr cap rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part Icomplete all as directed and spcified.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified.

M&L RCC Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete uing type M-25(Design mix) (using 20mm graded) stone aggregate complete all as specified.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified.

M&L RCC in Columns, pillars, piers, posts and struts using type M-25(Design mix cement concrete) (using 20mm graded) stone aggregate complete all as specified.

Form work to soffits of suspended slab such as roof slabs, floor slabs and similar work; n. exc 200mm thick(horizontal or sloping) all as specified and directed by Engr in Charge.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders bressummers, lintels, cantilvers, shelves including sup-ports, overhangs, etc. also splays between floors and beams, etc.

Form work to edges of concrete flats, floor and roofs n. exc 20 cm wide horizontal or sloping and similar work exc 10cm but n exc 20cm wide all as specified and directed by Engr-in-charge.

Mild steel bars(TMT) 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and for and including MS wire (annealed) not less than 0.9mm dia.

All as per item above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.

M&L RCC slab supported on walls , beams & colmns etc as in roof landing, shelves & the like using M-25(Design mix) using 20mm stone aggregate complete all as specified.

M&L RCC in chajjas & the like using M-25(Design mix) using 20mm stone aggregate complete all as specified.

M&L RCC in beams, Cantilivers, bressummers, lintels over 1.5 mtr span using type M-25(Design mix) (using 20mm graded) stone aggregate

M&L for cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028 of SSR Pt-II, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches complete all as specified.

S&F in PVC (SWR) bends any radius bore 75 mm.

M&L PVC (SWR) 75mm floor trap with grating including jointing to waste pipe fixed in solvent cement complete all as specified and directed.

S&F PVC 75mm (SWR) junction single(single T) equal or unequal with access door complete as specified.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls complete all as specified.

S&F 75mm PVC (SWR) vent cowl complete as specified

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches complete all as specified.

S&F vitreous china urinal, half stall type, white (back wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe

Supply & Fix 32mm dia PVC waste pipe for WHB and Urinal with union complete all as specified and directed.

S&F CP soap dish fixed to wall with suitable rawl plug all as specified and directed in Engr in Charge.

S & F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum weight 60 gms)

S& F 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipeand fixed. (Minimum weight 2 0 m m - 2 1 0 g m s ®

M&L for 15 mm thick cement plaster over the concrete / brick roof surfaces in cement mortar 1:4 mixed with liquid water proofing compound @ 200ml per bag WPC (liquid type) , surface finished even and smooth without using extra cement all as specified and directed. Note :- Water proofing additive shall be measured and paid separately.

M & L for Water proofing treatment to RCC roof slab, walls, chhajjas etc, shall be carried out as specified below and as directed by Engineer-in-Charge.. (a) Preparing plastered surfaces of roof slab, walls, chhajjas etc, by brooming with broom sweeping free from dirt dust etc & evenly applying a coat of approved bituminous primer @ 0.40 Kg/Sqm of area complete all as specified. (b) Laying 3mm thick APP polymer modified approved membrane, non woven, polyester, weighing not less than 3.5 Kg/Sqm with laps & overlaps as specified & joints sealed and applied over a coat of bitumin of Gde 85/25 1.2 kg per sqm complete by torch application method all as specified & directed by Engr-in-Charge. Carrying out test by flooding water for 24 hrs for leakage & seepages and rectifying the same to the entire satisfaction of GE.

M&L 20mm Gun metal globe of gate valve with iron wheel head, screwed both ends of size complete all as specified.

S&F 15 mm dia, pillar taps, cast copper alloy capstain heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' long screwed shanks and fly nuts, screwed for iron pipe complete all as specified.

Forming embankment incl raising (or lowering) earth, spreading in layers n exc 30 cm thick, watered, rammed/rolled and finished to required size, shape, etc. n exc 1.5m high from base.

Rolling & consolidating formation surfaces in cutting/filling incl watering as required, filling in hollows and depressions which occur during the process of rolling using 8 to 12 tonne power roller all as specified and directed.

M&L soling (or sub base) 150mm thick (spread thickness) with broken boulders or quarried stone, interstices filled, surfaces formed and rolled and consolidated with 8 to 12 tonne power roller to gradient and camber required all as specified and directed.

M&L WBM 7.5cm thick (compacted thickness) with coarse aggregate with lime stones, sand stones, flint or quartize of grading 2 (63 mm to 40mm size) spead, rolled and consolidated with 8 to 12 tonne power roller to gradient and camber required all as specified and directed. .

M&L preparation of WBM top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bages to remove all loose dirt etc complete all as specified and directed.

M & L for applying evenly a priming/tack coat with bituminous primer using paving bitumen VG-10 at the rate of 5.00 Kg per 10 Sqm on black top surfaces including preparation of surfaces complete all as specified and directed.

M&L bituminous premixed asphaltic dense concrete 40 mm consolidated thickness using paving bitumen VG-30 5.5% binder content by weight of total mix, spread by means of self propelled mechanical spreader/paver, rolled and compacted to required camber and gradient by using Tendem vibratory steel wheel, Static steel wheel rollers min capacity 12 tonne complete all as specified and directed.

M&L for preparing bitumenous surface of road and marking 2.5 mm thick centre lines,stop lines dashes,arrows etc and the like n.exc 10 cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed

Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete , all as specified and directed by Engineer-in-Charge.

M&L 60mm thick pressed precasting conc interlocking tiles/paver blocks any shape & size and glosy finish top surface with Grey cement and pigement confirming to IS 15658-2006 of M-35 grade laid over 50mm thick sand cushioning as directed by Engr -in-Charge.

M&L rendering 15mm thick in cement mortar 1:4 on fair surfaces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M & L preparation of newly plastered surfaces of wall and applying two coats of cement base paint etc complete all as specified and directed.

Excavation in trenches n. exc 1.50 m wide and n.exc 1.50 m in depth for foundation etc and getting out in hard & dense soil.

M&L for 200 mm bore (internal dia) RCC pipes class NP2, laid in trenches and jointed with cement joint including collars and tested complete all as specifiedand directed.

M&L for 300 mm bore (internal dia) RCC pipes class NP2, laid in trenches and jointed with cement joint including collars and tested complete all as specifiedand directed.

M&L for cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes including packing under and completely surrounding pipe with concrete of 200mm bore RCC pipe after they are laid and tested complete.

M&L for cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes including packing under and completely surrounding pipe with concrete of 300mm bore RCC pipe after they are laid and tested complete.

M & L for brick work with old size sub class 'B' bricks straight or curved on plan exc 6 m mean radius builtin CM 1:4 all as specified.

M&L for providing PCC 1:2:4 type B-0 (using 12.50mm garded crushed stone aggregate) as in benching, surface channel of drain complete all as specified .

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping /bed blocks incl. weathering rounded or chamfered angles and throating incl. necessary form work req. as in specified and directed

S & F precast fibre reinforced cement concrete Manhole cover (Ist quality) including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of overall Size 500mm x1000mmx80mm omplete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:4 on concrete/brick wall surfaces (internal surface of man hole) finished even and smooth with using extra cement and WPC complete all as specified. (WPC paid separately)

Cutting into existing manholes for 200mm bore pipe connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as directed and specified

Supply only liquid water proofing compound

M&L for PCC Type C2 1:3:6 (using 20mm aggregate) in surface channels and drains all as specified and directed by engineer-in-charge.

M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.

M&L for Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.

S&F Factory made steel fibre reinforcement concrete (SFRC) cover of medium duty 1.00mx0.5m 70-75mm thick with perforated holes 50mm dia and set in CM 1:6 complete all as specified.

M & L for rendering 15 mm thick in cm (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M & L for framed work such as grills grating etc with end of bars shouldered of revitted framed guard bars raillings etc.and similar works confirming to Fe- 290.Gde E-165.

S&F Framed work Fe 290 Gde E-165 as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete.

M&L Point wiring with 1.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unseathed cable 1100 volt grade in and including concealed/surface , non metalic rigid pvc medium grade ISI marked conduit not less than 19 mm with all fittings & other accessories and also including PVC insulated ISI marked unseathed FRLS cable 1100 volts grade of size 1.5 sq mm copper conductor as earth wire to common earth dolly including concealed in wall/ceiling, modular MS box with modular cover plate with frame suitable for modular switches, sockets, fan regulator etc for the following :- Note - Colour code of cable Phase-Red Neutral- Black and Earth -Green)

One light/fan point controlled by one way switch 6 amps 240 volts

One bell point controlled by one bell push switch 6 amps 240 volts

One 3 pin 6 Amps switch socket out let point on independent board

One 3 pin 6 Amps switch socket out let point on same board

M&L Point wiring with 2.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unseathed cable 1100 volt grade in and including concealed/surface , non metalic rigid pvc medium grade ISI marked conduit not less than 19 mm with all fittings & other accessories and also including PVC insulated ISI marked unseathed FRLS cable 1100 volts grade of size 1.5 sq mm copper conductor as earth wire to common earth dolly including concealed in wall/ceiling, modular MS make box with modular cover plate with frame suitable for modular switches, sockets 16 Amps, 240 volts :- Note - Colour code of cable Phase-Red Neutral- Black and Earth -Green)

S&F modular bell push switch with indicator 6 Amp 240 volte suitable for one module etc complete as specified and directed by EIC

S&F bell electric AC, 230V, Single phase, Dingdong type complete all as specified and directed.

S&F modular one way switch 6 Amp 240 volt marked light/fan marked suitable for one module etc complete as specified and directed by EIC

S&F Modular socket suhttered 6 Amp 2/3 pin universal suitable for two model , 250 volts complete all as specified and directed by EIC

S&F modular switch one way 16 Amps 240 volts suitable for one module complete as specified and directed by EIC

S&F Modular 6/16 Amp socket shuttered suitable for two module , 250 volts complete all as specified and directed by EIC

S&F modular step type two module fan regulator suitable for 120 watt 250 volts complete as specified and directed By EIC

M&L for ceiling rose with three terminal as per relevant IS complete as specified and directed by EIC

S&F wall mounted LED batten with aluminium housing and integrated electronic drive 18/20 watt fixture 4 feet provided for efficient heat dissipation with polycorbonate diffuser and integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete

S&F surface and wall mounted LED batten 10 watt 2 feet long extruded aluminium housing provided for efficient heat dessipation with polycarbonate diffusser and integrated electronic drive, pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete

S&F Energy saving new generation 10 W LED IP 65 bulkhead luminair with opal diffuser with 10 LED lamp etc complete as specified and directed by Engr-in-charge

S&F epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door) 8 way SPN suitable for MCB DB's 240 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting complete all as specified and directed by EIC

S&F epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door) 4 way SPN suitable for MCB DB's 240 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting complete all as specified and directed By EIC

S&F epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door) 4 way (VTPN)TPN suitable for MCB DB's 415 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting complete all as specified and directed by EIC

S&F MCCB TPN 125 Amp fixed type 25 KA fixed thermal and fixed magnatic setting suitable for 415 volts complete all as specified and directed by Engineer-in-Charge.

S&F MCB single pole and neutral ISI marked `C' series working on 240 volts 50HZ AC supply for incomming & out going controlling system of capaicty 63 Amps 10 KA breaking capacity etc all as specified and directed By EIC

S&F MCB single pole ISI marked ISI Marked `C' series working on 240 Volts 50 HZ AC supply for incomming and out going controlling cercuit of capacity 6-40 Amp breaking capacity 10 KA etc all as specified and directed By EIC

M&Lfor sub main wiring with two single core, PVC insulated,ISI marked, unsheathed, 1100 volts grade multistranded copper conductor FRLS cable drawn into and including suitable size stove enamelled conduit (ISI marked) concealed/surface with all accessories and including one single core pvc insulated multistranded unsheathed 1100 volts grade copper conductor FRLS cable as earth wire of the following size as in repair complete all as directed & specified.

2x 6.0 sqmm + 1x 6.0 sqmm earth wire

M&Lfor sub main wiring with Four single core, PVC insulated,ISI marked, unsheathed, 1100 volts grade multistranded copper conductor FRLS cable drawn into and including suitable size stove enamelled conduit (ISI marked) concealed/surface with all accessories and including one single core pvc insulated multistranded unsheathed 1100 volts grade copper conductor FRLS cable as earth wire of the following size as in repair complete all as directed & specified.

(a) 4x 10.0 sqmm + 1x 10.0 sqmm earth wire

M&L earthing complete with galavanised steel earth plate electrode 60x60cmx6mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below gorund level ) with top edge of the plate not less than 1.5 meter below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts,nuts,check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion

Supply and fix metalic exhuast fan 250/300 mm sweep suitable 240 volts and unserviceable fan deposited in MES store yard etc complete as specified and directed by EIC.

S&F in arodynamically designed street/security light 45 Watt with excellent thermal management, inbuilt tilt angle arrangment with IP66 protection incl 3 suitable size 3 core cable from ceiling rose to connector fitting etc complete as specified and directed By EIC

Supply and fix decorative ceiling fan 1200mm sweep with all accessories as per manufacturer norms with suitabld size 3 core cable from ceiling rose to connector of ceiling fan etc complete as specified and directed by EIC.

Supply, installing, testing and commissioning of outdoor type, floor mounted step down transformer, 11 KV/433 Volts (at no load) AC 3 phase 50 Hz, 100 KVA capacity, core type, double copper wound, oil immersed, naturally cooled, Oil Natural-Air Natural (ON AN), with external cooling tubes, delta connected on primary side (HV) and star connected on secondary side (LV) in accordance with vector group DYN-11 with Neutral brought out on secondary side (LV side) and having tapings at +5% to -10%in steps of 2.5% on HV side to be changed by means of hand operated off load tap changer gear. The maximum temperature rise should not exceed 40 degree celsius in oil and 45 degree celsius in HV/LV winding when measured by resistance method after continuous full load run on an ambient temp of 40 degree celsius. Perfectly insulated and clamped to minimize noise and vibrations. The transformer shall be IS 1180 (Part-I) : 2024, Energy Efficient Level -II and shall comprise of the following :-

(a) One cable box on HT side (primary side) consisting of three nos porcelain bushing with copper rods, complete with nuts and washers, with cable glands including jointing materials complete all as specified and directed. (b) One cable box on LT side (Secondary side) consisting of four nos porcelain bushing with copper rods, complete with nuts and washers, with cable glands suitable size/rating of cable complete. (c) Oil conservator with filter type drain valve and oil level guage. (d) De-hydrating breather with first fill of dehydrating agent (silica gel). (e) Explosive vent, Thermometer pocket on tank cover, Oil level gauge, Oil drain filter valve, Lifting lugs, Oil filling hole with cap / plug with connection plate complete, Air release valve plug and four nos plain solid cast steel detachable rollers.

(f) One no 100 mm dia, dial type thermometer, vapour pressure type, having range 0-120 degree celsius with metal guard having maximum perimeter temperature reading indicator with re-setting device. (g) Two earthing terminals on tank cover to facilitate fixing of earth strip for earthing of body. (h) Rating plate and terminal marking plate. (j) Extra bushing for neutral, in the LT cable box for providing independent set of earthing for neutral. (k) First fill of new and unused transformer oil, IS-335 marked, filtered and tested upto 50 KV dielectric strength at 2.5 mm air gap between testing electrodes (l) Provn the angle iron channel for floor mounted outdoor type transfomer as per site requirement. (m) Providing adequate size and nos of channels, embeded in platform floor, for movement of transformer. (n) Unidirectional roller wheel. (o) Other accessories as per manufacturer design.

Supply,installation, Testing and commissioning of HT 11 KV 3 Phase, 50 Hz, indoor, totally enclosed metal clad switchgear complete with vacuum circuit breaker, having repturing capacity upto 250 MVA,overload and earth fault protection, ammeter, voltmeter and of rating upto 400 amps, dust & vermin proof, motorised, as well as manually charged, fully interlocked, horizantal draw out horizantal isolation type, floor mounted with all standerd accessories, metering equipments and comprising of following.

(e) LED indicating lamps, Breaker ON, Breaker OFF, Spring charged, trip circuit healthy , Auto trip indicator, RYB phase indications. (f) Switch for closing / tripping of VCB (g ) Heater with switch , thermostat and illumination. (h) 3 Pin plug socket with switch. (i) 01 No shunt trip coil and closing coil 24V DC (j) Power, pack unit 24V DC with dry rechargeable batteries complete

(a) All sanitry work required for modification to existing HT panel, extension of HT bus bar, necessory connection and other misc works etc, required for fixing new VCBs are deemed to be included in the unit rate coated by the contractor. (b) The cost of Bus bar for interconnection of VCBs which shall be made of copper, electrolytic grade and of suitable rating, is deemed to be included herein.

Supply, laying & testing cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armored electric power cables (heavy duty) with stranded aluminium conductor, 11000 volts grade, of size 3 core 95 sq mm complete all as specified and directed.

Supply & fix cable jointing kit for 11 KV grade cable for indoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Al conductor cable of size 95 sq mm complete all as specified and directed.

Supply & fix cable jointing kit for 11 KV grade cable for outdoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Al conductor of size 95 sq mm complete all as specified and directed.

Supply and install LT panel board, cubical type 415 Volt, 3 phase, 50 Hz, outdoor type, floor mounted, weather proof, fabricated out of 3.15mm CRCA sheet, duly spray painted with powder coated paint and comprising of the following :-

(a) Aluminium bus bar - 300 amps rating - 03 Nos for phases and 150 amp rating - 01 No. for neutral

(b) MCCB 4 pole 200 amp, 35 KA, adjustible type, 415 volt - 01 No (incoming)

(c) MCCB 4 pole 200 amp, 35 KA, adjustible type, 415 volt - 01 No (Outgoing)

(d) Voltmeter (0-500V) three phase, digital type -01 No

(e) Ammeter (0-300 amps) three phase, digital type with CT's - 01 No

(f) ON/OFF indication lamp with toggle switch - Set of 03

(g) Grouting of panel including PCC

Supply and install LT panel board, cubical type 415 Volt, 3 phase, 50 Hz, outdoor type, floor mounted, weather proof, fabricated out of 3.15mm CRCA sheet, duly spray painted with powder coated paint and comprising of the following :-

(a) Aluminium bus bar - 300 amps rating - 03 Nos for phases and 150 amp rating - 01 No. for neutral

(b) MCCB 4 pole 200 amp, 35 KA, adjustible type, 415 volt - 01 No (incoming)

(c) Three phase static energy meter of accuracy class 1.0, 3 x 240 Volt, 50 Hz with backlit LCD display of rating 10-60 amp (measures and display KWH, V, current, KW, pf last month history of KWH, MD in KW) with special features like TOD, temper logging, optical communication port display in absence of power with transparent hinge type box - 01 Set

(d) MCCB 4 pole 200 amp, 35 KA, adjustible type, 415 volt - 02 Nos

(e) MCB SPN 40 amp, C series, 415 volt - 01 No

(f) Time switch with contactor of suitable rating - 01 sets

(g) Voltmeter (0-500V) three phase, digital type -01 No

(h) Ammeter (0-200Amps) three phase, digital type with CT's - 01 No

(j) ON/OFF indication lamp with toggle switch - Set of 03

(k) Grouting of panel including PCC

Supply and laying sub class 'B' bricks laid dry and flat across the length of cable for protection of cable complete

M & L for sand cushioning for protection of cable with screen wash river sand complete

Supply and laying un-reinforced precast concrete cable cover ,class HVP all as specified and directed.

M&L for providing PCC 1:3:6 type C2 (using 40 mm graded aggregate) in fdn filling and mass concrete etc complete.

M&L for providing PCC 1:2:4 type B2 (using 40 mm graded aggregate) in fdn filling and mass concrete etc complete.

Supplying & laying cable XLPE (LT) insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of following sizes :-

120 Sqmm 3.5 core

95 Sqmm 3.5 core

6 sqmm 2 core

10 sq mm 4 core

S&F Steel tubular swan neck poles type 410 SP-31 (9 metres long) complete with cast iron base plate, finial taper plug, bolts, nuts & screws including hole for holding clamps & painting of pole externally with one coats of black bituminous paint (upto planting depth) and above plinth block/ concrete collar with two coats of aluminium paint over a coat of red oxide primer including preparation of surfaces including painting of 30 cm wide black bands/strip 3 Nos with synthetic enamel paint in alternate layers upto the height of 1.5 Mtr above coping level all as specified and directed by engr-in -charge.

Supply and fix LED street light fittings 70 Watt ,high pressure die cast aluminium hosing, IP 65 should have minimum efficiency at level >=120lumens/watt, life of fixture not less than 50K Hrs, Ripple<5%, UGR<19, Minimum surge protection level of 4 KV, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95, THD<10%@240V AC, an operating voltage range of 140-270V including connecting wire from junction box to street light with size of 1.5 sqmm x3 core all as specified and directed.

S&F LED Post top lantern luminaire outdoor type with die cast aluminium spigot, lid cover and clear acrylic cover 40 watt, 5700 K with IP-65 protection with impact and corrosion resistant incl connection complete all as specified and directed.

S&F MS boxes of size 300mm X 300mm X 150mm depth, made out with 3mm thick sheets. The box shall provided with and including 4 Nos, 100 Amps aluminum bus bar mounted on porcelain insulators including one no. MCB SP 230 volts 5 amps, 'C' series and connecting the bus bars to cables with using suitable GI nut, bolts and washers and aluminum lugs etc fixed on pole using 25x3mm FI clamps, nuts, bolts & washers complete.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick directly buried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5m below the ground level connected to GI strip 32 x 6mm by means of bolts nuts check nuts and washers of galvanised iron at 2 points & GI pipe 40 mm bore light grade for protection of earthing strip PCC chamber 1:3:6 (type C-1) using 20mm graded stone aggregate, watering pipe 20mm bore light grade, funnel with wire mesh, 50 mm thick cover of RCC 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8 mm MS bars at 150 mm centre to centre both ways and charcoal dust and common salt all as shown in electrical plate No. 3 of MES SSR part-I and including excavation & earth work & connecting the earthing point/equipment and testing complete.

Supplying and laying synthetic rubber insulated mats 2mm thick for voltage upto 3.3 kv for electrical purpose as per IS 15652-2006 suitable for electrical shock safety of sizes 2m x 1m all as specified and directed.

All as per item above but 2.5 mm thick for voltage upto 11 kv of size 2m x 1m.

M&L HDPE pipe 40 mm with all necessary fittings laid in trenches/fixed on pole/wall/under floor including suitable mild steel FI clamps of required size complete.

Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of upto 100 mm dia suitable for 0.4 mpa working pressure.

Supply, laying, jointing & testing of GI Pipe, medium grade, including all fittings, laid in trenches/ wall complete all as specified & directed of following sizes :-

50 mm bore

25 mm bore

20 mm bore

S&F Gun metal gate valve with iron wheel head screwed both ends for iron pipe complete all as specified & directed for following sizes :

50 mm bore

25 mm (1") dia

20 mm bore

Supply & installation of 50mm bore flanged ends water meter, woltman type, incl testing and making good connection with flanged ends, with gasket rubber sheet and nut & bolts etc, ISI marked, fixing in horizontal/ inclined/ vertical position & connection complete

M&L for construction of pit masonry for valve and meter constructed complete with MS sheet cover and locking arrangement etc suitable for size 600x600x600 mm, applying one coat of red oxide primer and two coat of synthetic enamel paint to all steel surface and earth work in any type of soil including disposal of surplus soil to a distance not exceeding 50mtrs complete all as specified and directed.

Cutting of existing CI pipe line 100 mm dia and insertion of CI Tee for taking connection upto 50mm bore including necessary fittings, excavation and earth work complete all as specified and directed.

Supply & fix refrigerator, electric driven (single phase) capacity 195 Ltrs BEE 5 star rated all as specified and directed.

Supply & fix refrigerator, electric driven (single phase) capacity 310 Ltrs BEE 5 star rated all as specified and directed.

Supply, installation & commissioning of Water Cooler fully stainless steel, electric driven single phase having approx storage capacity of 120 litre and nominal cooling capacity of 60 Litres per hour complete

Voltage stabiliser for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output viltage stabilized at 230 V with accuracy ± 2.5% and of capacity 3.0 KVA .

Voltage stabiliser for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output viltage stabilized at 230 V with accuracy ± 2.5% and of capacity 1.0 KVA .

S & F water heater storage type (Geyser) vertical type with suitable size of fastner and incl provision and connecting up of SS braided pipe with adopter for inlet and outlet water connection, having adjustable knob for temperature control and inner tank material of superior glass lined tank and outer body material ABS with high pressure with standing capacity upto 8 bar pressure complete all as specified of capacity 25 ltr having heating element 2 KW and not less than 5 star rating with minimum two year warrant on product, minimum 3 years warranty on heating element and minimum 7 years warranty on inner tank.

M/S Hind Constructions

BEHAL TRADERS

Global Enterprises

The new hut furnitures

G and G Infratech Private Limited

M/s KUMAR BUILDERS

POONAM ENTERPRISES

V M CONSTRUCTION

imran construction company