Construction of Additional Floors on A-Block, D-Block and Canteen Building in PDIC at BEL Bangalore.

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge:All kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms & lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.Hard rock (blasting prohibited)

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.Ordinary rock

Excavating trenches of 600 mm width for pipes, cables, etc including excavation for sockets, and dressing of sides,ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :All kinds of soil, Pipes, cables etc,Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia

Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials All kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Supplying chemical emulsion in sealed containers including delivery as specified.Chlorpyriphos/ Lindane emulsifiable concentrate of 20%

Diluting and injecting chemical emulsion for PRE-CONSTRUCTIONAL anti - termite Treatment of soil under floors, around column pits, wall trenches etc as per IS specifications using chemical 300 mm apart including drilling 12mm dia holes and plugging with cement mortar1:2 (1 cement: 2 coarse sand) to match the existing floor with Chlorpyriphos / Lindane emulsifiable concentrate of 20% with 1% concentration etc., complete( Note: Plinth area of the building will be measured for payment)

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead beyond 10 km upto 20km for all lifts, complete as per directions of Engineer-in-charge.

Providing and laying in position Ready Mix Concrete/ machine batched and machine mixed/design mix cement concrete of specified grade excluding the cost of centering and shuttering - All works 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 20 mm nominal size).

Providing and laying in position Ready Mix Concrete/ machine batched and machine mixed/design mix cement concrete of specified grade excluding the cost of centering and shuttering - All works 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size).

Providing and laying in position Ready Mix Concrete/ machine batched and machine mixed/design mix cement concrete in , parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., at all height as per drawing, excluding the cost of centering, shuttering and finishing: 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

Providing and laying in position Ready Mix Concrete/ machine batched and machine mixed/design mix cement concrete M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Minimum Cement content considered in this item is @ 330 kg/cum. Additional cement requirement as per mix design shall be considered by the bidder while quoting, nothing extra shall be paid on this account).All works upto plinth level

Providing and laying in position Ready Mix Concrete/ machine batched and machine mixed/design mix cement concrete M-25 grade cement for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering , shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS :9103 to accelerate, retard setting of concrete, improve worability without impairing strength and durability as per direction of Engineer-in-charge. All works above plinth level upto any height as per drawing .(Note :- Minimum Cement content considered in this item is @ 330 kg/cum. Additional cement requirement as per mix design shall be considered by the bidder while quoting, nothing extra shall be paid on this account).

Providing and laying in position Ready Mix Concrete/ machine batched and machine mixed/design mix cement concrete; using coarse aggregate and fine aggregate derived from natural sources, portland pozzolana / ordinary portland /portland Slag cement, admixtures in recommended proportions as per iS: 9103 to accelerate / retard setting of concrete, to improve Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. in case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement..All works above plinth level upto any height as per drawing concrete of M35 grade with minimum cement content of 370 kg /cum

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast / stone aggregate 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for columns, pillars, piers, Abutments, posts and Struts at any height.

Extra for shuttering in circular work (20% of respective centering and shuttering item) i.e for columns, pillars, piers, Abutments, posts and Struts at any height.

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers at any height.

Extra for shuttering in circular work (20% of respective centering and shuttering item) i.e for Lintels, beams, plinth beams, girders, bressumers and cantilevers at any height.

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform up to 5 m height of slab.

Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. at any height.

Centering and shuttering including strutting, propping etc. and removal of form for Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like at any height.

Centering and shuttering including strutting, propping etc. and removal of form for Edges of slabs and breaks in floors and walls Under 20 cm wide

Centering and shuttering including strutting, propping etc. and removal of form for Weather shed, chajjas, corbels etc., including edges at any height.

Centering and shuttering including strutting, propping etc. and removal of form for Stairs, (excluding landings) except spiral-staircases

Providing Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all levels. Thermo-Mechanically Treated bars of grade Fe-500D or more ( Basic price of Reinforcement Steel is considered as Rs 55.00 per Kg)

Structural steel work riveted, bolted or welded in built up sections, trusses and frame work, using MS angles,channels,beams, pipes, tubes, plates including cutting, hoisting, fixing in position with necessary wooden/steel scaffolding including providing applying two or more coats of synthetic enamel painting over a coat of approved steel primer all complete.(Note: The Basic rate of Structural Steel is considered as Rs 60.00 Per Kgs)

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel Members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Coursed rubble masonry (second sort) with hard stone in foundation & plinth with :Cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work with non modular fly ash bricks conforming to IS:12894, class designation 5.0 average compressive strength in foundation/super structure above plinth level at all height as per drawing in :Cement mortar 1:6 (1 cement : 6 Coarse sand)

Half brick masonry with non modular fly ash bricks of class designation 5.0, conformingio IS :12894, in super structure above plinth level at all height as per drawing.Cement mortar 1 : 4 (1 cement : 4 coarse sand)

6 mm cement plaster to ceiling of mix 1:3 (1 Cement : 3 fine sand) including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge.

12mm cement plaster of mix 1:4 (1 cement : 4 fine sand)including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge.

15mm cement plaster of mix 1:4 (1 cement : 4 fine sand)including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge.

Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.

12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) including scaffolding

Providing and fixing galvanised iron mesh with hot dip zinc coating of 120gms/sqm of width 150mm at the junction of dissimilar face like a brick and RCC Column / roof beam, llintel beam and like including nail etc., complete of Arpitha make or approved Equivalent

Providing and fixing GI hexagonal mesh in 2 layer on the old brick masonry work including necessary nails for fixing etc. all as specified and or as directed etc., complete.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.With cement mortar 1:4 (1 cement : 4 fine sand)

Add for plaster drip course/ groove in plastered surface or moulding to R.C.C projections.

12mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 fine sand):Raised Band

Providing and applying Two or more coats of Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, wall surfaces to be prepared by scraping away any loose particles, dust, etc., by washing and scrubbing and 1 coat of primer approved by manufacturer. The wall surfaces are smoothened by 2 to 3 coat of putty of approved make and smoothened surfaces by sandpapered to achieve a smooth finish and two or more coats of Premium emulsion paint are applied as per manufacturer specification.The rate shall include for finishing the painting to obtain an even and uniform shade as directed by the Engineer-in-charge on new work at all height as per drawing.

Providing and finishing walls with two or more coats of apex ultima or equivalent make premium Acrylic smooth exterior paints with Silicone additives of required shade applied @ 1.67 ltr/10Sqm on new work over and including a base coat of priming coat of exterior primer applied @ 2.20 kg/10 sqm etc. complete including preparing the surface smooth by removing durt, pressure washing, sand papering wherever required and providing necessary scaffolding for the work, cost of all the materials, labour, cleaning the area throughly after the work is completed as per specifications and as per directions of engineer-in-charge above plinth level at all height as per drawing

Providing and finishing walls with two or more coats of apex ultima or equivalent make premium Acrylic smooth exterior paints with Silicone additives of required shade applied @ 1.43 ltr/10Sqm on old work etc. complete including preparing the surface smooth by removing durt, pressure washing, sand papering wherever required and providing necessary scaffolding for the work, cost of all the materials, labour, cleaning the area throughly after the work is completed as per specifications and as per directions of engineer-in-charge. above plinth level at all height as per drawing.

Providing and applying synthetic Scratch finish texture for external walls of approved colour over a coat of exterior wall primer, one coat of Texture scratch finish including preparation of surface by thorough cleaning and wetting as per manufacturer’s specification fully to give an even shade before painting all as per the direction of Engineer In-Charge above plinth level at all height as per drawing. (Note : The rate shall include the scafolding)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Providing and finishing one wall with Royale play as per instructions of Engr-in-charge etc,complete. Make : M/s Asian paints or approved equivalent

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos.2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)

Providing and applying one or more coats of Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, wall surfaces to be prepared by scraping away any loose particles, dust, etc., by washing and scrubbing and 1 coat of primer approved by manufacturer and one or more coat of Plastic emulsion paint are applied as per manufacturer specification.The rate shall include for finishing the painting to obtain an even and uniform shade as directed by the Engineer-in-charge on new work at all height as per drawing.

Providing and laying Antiskid Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including fixing of spacers and Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed Vitrified tiles Matt/Antiskid finish of size,Size of Tile 600 x 600 mm. (Note: The basic rate of Antiskid vitrified tile is considered as Rs 600.00/- per sqm)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including fixing of spacers and Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete..Size of Tile 800x800 mm. (Note: The basic rate of vitrified wall tile is considered as Rs 650.00/- per sqm)

Providing and fixing vitrified tile dadoing conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including fixing of spacers, corner beading and Grouting the joints of dado tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete..(Note: The basic rate of vitrified wall tile is considered as Rs 500.00/- per sqm)

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding, grooves and polishing, nosing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade Area of slab upto 0.50 sqm (Note: The Basic rate of Granite is considered as Rs 1908.00 Per Sqm).

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding, grooves and polishing, nosing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm (Note: The Basic rate of Granite is considered as Rs 2152.00 Per Sqm).

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. at all height (Note: The Basic rate of granite is considered as Rs 2000.00 per sqm)

Supply and Laying of Electrostatic Dissipative type flexible homogenous compressed ESD vinyl floor tiles of minimum size 610 mm x 610 mm x 2 mm. Necessary preparation of sub floor surface should be using Self-Leveling compound. The flooring should be laid using approved conductive adhesives. Joint between the tiles shall be grooved, PVC welded using automatic equipment and copper tape shall be provided and laid all as per manufacturer’s specification. The tiles will have permanent conductivity and ESD properties to be independent of humidity due to homogenous nature of product as it is sliced from pressed vinyl block. Scope of work should include laying of tiles, self levelling compound, Conductive adhesive, copper tape at site, grooving / welding of joints as per manufacturers specifications. Certification of Electrical resistance such as Point to Point, Point to Ground and Body to Ground resistance, Combination resistance of the installed system and Body voltage generation, meeting to international standards and duly tested and authorized by a Certified ESD engineer who has received his Certificate from an internationally reputed certifying organization. (Note: Rate to be quoted for complete finished work including all materials and labour and necessary preparation of surface. (The Basic Price considered for ESD Flooring is 2700 per Sqm)

Providing and fixing 10 mm thick appproved quality Engineered wooden flooring of approved shade including necessary preparations of the floor surfaces with a soft backing sheet of approved make and colour with laminated Skirting, laminated T Door Profile, laminated Reducer Door Profile Underlay Foam 2mm Underlay Platic complete as directed by Engineer in charge., complying to EN 13489 with plank width of 120 mm and Length of 1200mm length and top layer of 0.6mm European Walnut/ oak / Teak/ Sapele natural veneer. Middle HDF and bottom layer to be of European Pine. Surface of top layer is pre finished with seven layers of UV hardened acrylic lacquer, free from formaldehyde, solvents, pentachrophenol (PCP) and complying to EU E1 emission norms. Flooring planks shall be interlocked using patented PlankLoc system on all four sides in a glue- less/floating manner. Engineered Wood planks shall be a Composition of 3 layers of board with directions of each layer fibers oriented at right angle to the adjacent layer minimizing the expansion and contraction. Top layer pre finished with water based stains/lacquer and wood veneer surface to be brushed with specified brushing levels. Floor Board edges beveled, in length and width as specified by the manufacturer and can be refinished twice.The design/pattern/shade etc are as specified and or as directed by the Engineer-in-charge. (Note:The basic price of wooden flooring including backing is considered as Rs.4220/- per sqm).

52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.

Providing and Laying Polypropylene Bubble sheet for floor protect over the already laid tiles and granite as directed by the Engineer-In-Charge.

Providing and Fixing DI Puddle Flange of 100 mm dia for tanks/sumps etc complete

Providing and Fixing DI Puddle Flange of 50 mm dia for tanks/sumps etc complete

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 75 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Bend 87.5° 110 mm bend.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Bend 87.5° 75 mm bend

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Shoe (Plain) 110 mm Shoe.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Shoe (Plain) 75 mm Shoe

Providing and fixing 75mm dia PVC soil waste and vent pipe conforming to IS:13592 of SWR quality of 6kg /cm2 pressure including all fittings, like EG : Bends, Tees, Elbows, Collars, junction, inspection doors, cowls, offsets, access pipes, jointing with rubber ring / solvent cement by application of leak proof adhesive like FRP paste including cutting holes in walls and floors and making good.

Providing and fixing 110mm dia PVC soil waste and vent pipe ( including specials) conforming to IS:13592 of SWR quality of 6kg /cm2 pressure including all fittings, like EG : Bends, Tees, Elbows, Collars, junction, inspection doors, cowls, offsets, access pipes, jointing with rubber ring / solvent cement by application of leak proof adhesive like FRP paste including cutting holes in walls and floors and making good.

Providing wood work with Beach wood in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast/lugs or with dash fasteners of required dia & length (Rate shall be including the cost of hold fasts, lugs or dash fastener etc as required at site)

Providing and Fixing 30x10mm beach wood architrave all around beach wood door frame frame including necessary screws as per design & approved by Engineer in charge.

Providing and fixing 35 mm thick flush doors conforming IS: 2202 (part-1) core of solid wood, construction with frame of pine wood with density of 700 kg/m3 with 5 ply construction with 3mm thick veneer ply on both sides and veneer is pre pressed from factory, conforming to IS 2046 with BWP grade adhesive treatment with phenol formaldehyde resin as per IS 848 norms ensures superior quality and performance of the doors with uniform thickness without any undulations, wraping or bending, emission free as per E1 standard and eco-friendly fixed to the door frames with 4 Nos.of 125mm long ball bearing hinges etc., complete. (Note: The shutters shall be provided with vision panel as per drawing. In case of double leaved shutters rebating shall be made without any extra cost).

Providing and fixing 35 mm thick flush doors conforming IS: 2202 (part-1) core of solid wood, construction with frame of pine wood with density of 700 kg/m3 with 5 ply construction with 1mm HPL sheet (laminate) on both sides and laminate pre pressed from factory, conforming to IS 2046 with BWP grade adhesive treatment with phenol formaldehyde resin as per IS 848 norms ensures superior quality and performance of the doors with uniform thickness without any undulations, wraping or bending, emission free as per E1 standard and eco-friendly fixed to the door frames with 4 Nos.of 125mm long SS hinges etc., complete. (Note: The shutters shall be provided with vision panel as per drawing. In case of double leaved shutters rebating shall be made without any extra cost).

Providing and fixing SS finish Door lock with Handle full set of make Dorset Kaba / Dorma or Equivalent product (Ref Code : Mortice Lock Reference No HLKIASC with handle 2N Complete Set) etc., as per specification and direction of the Engineer in Charge.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

Providing and fixing 22mm dia 200 mm long SS brush finished handles for doors of Godrej or equivalent Make including fixing etc., complete.

Providing and fixing SS tower bolts ( 250mmx10mm) with necessary screws etc., complete. Of approved make as per direction of Engr-in-charge.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete..

Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.Frame size 65 x 125 mm

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, aluminium handle and indicator tower bolt etc. all as per direction of Engineer-In- Charge. (Note: The quoted rate shall inclusive of stainless steel butt hinges and necessary S.S screws, door lockset and handles) 30 mm thick

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer and two coats of synthetic enamel painting all complete.

Providing and fixing of Galvanized steel fire rated doors of 120min Fire Rating of approved make with frame tested by CBRI/ International Test House in accordance with BS 476 part 22. Galvanized steel to be used conforming to IS 277 (2003 or latest edition). Door shall be of min. 46mm thick manufactured from two nos min. 1.0 mm galvanized steel sheets, lock seam jointed at stile edges to form a double skin fully flush shell. Infill of suitable insulation to the core to be provided for structure rigidity and sound insulation. Additional reinforcement for all hardware fixtures to be provided. The door frames are manufactured from minimum 1.5mm thick galvanised steel sheet pressed form to double rebate profile 154x77mm / 143 x 55mm or nearest available as approved and shall be finished with powder coating. Door frames may be supplied in knock down form for butt joints assembly at site. Vision panels of sizes according to National Fire Protection Association (NFPA), Uniform Building Code (UBC) and the International Building Code (IBC) using 5 or 6mm thick fire rated clear toughened glass of approved make wherever required are to be fixed with beading on frames with SS screws and fasteners. Door and frames shall be finished Pure Polyster Powder coated and shall have passed minimum 500 hours of salt sprey test. Door frames and shutters to have all hardware (Basic rate for fire rated door is considered as Rs. 10000 / Sqm)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality including scaffolding where ever required as per architectural drawings and direction of Engineer-in-charge complete.Upto 5mm depth and 5 mm width

Providing and fixing factory made uPVC white colour sliding glazed window/doors/ventilators of approved make and dimension as per design comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality,including providing and fixing single glass panes 5 mm thick, wire mesh and silicon sealent all complete as per approved drawing & direction of Engineer-in-Charge. (Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension

Providing and fixing 12mm thick frameless toughened glass door single leaf or double leaf shutter of approved brand and manufacturer,including 3M film etching,glass edge polishing and fixing the door securely using suitable hardwares to the floor and lintel etc..,suitably cutting the granite/vitrified flooring as per requirement,all confirming to manufacturer specifications as per approved design all complete as per direction of Engineer-in-charge ( Floor spring,Top patch,Bottom patch,Lock patch and D type handle etc to be paid separately) Including cost of materials, labours, usage charges of machinery complete as per specifications and as per directions of Engineer in-charge.

Providing and fixing froasted etching sticker 3M film etching on to the glass surfaces as per design/drawing etc complete.(Note:Area of 3M etching as provided on the glass surfaces shall be measured payment)

Supplying Hardwares like Floor spring,Top patch,Bottom patch,Lock patch and D type handle (2 Number) of dorma or any other equivalent make for frameless toughened glass door of suitable thickness for "single leaf door".

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Providing and fixing Concelaed lock for aluminium windows as per the instructions of trhe Engineer in charge for sliding windows

Providing and fixing approved quality and make S.S. mosquito mesh of 304 grade in aluminium doors, windows, ventilators etc.with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and as per the directions of Engineer-in-charge .

Providing and fixing wall mounted EWC Rimless Wall Hung with matching colour PP soft close seat cover, Hinges, Accessories (Reference no CNS-WHT-963UFSM) of Size: 380x515x360 mm, with Metropole Flush Valve Regular 40mm Size (Concealed Body) with Exposed Shut Off Provision &100mm Square Plate (Reference no FLV-1093NSQ) and 15mm Health Faucet (Reference Cat.no. 573) with 8mm Dia,1.2 Meter Long Flexible Tube & Wall Hook including cutting and making good the wall , floors wherever required and making connecting to the water supply and sanitary pipe lines with required fixtures. complete as directed by Engineer in charge.(Jaquar /Hindware or Equivalent make).

Providing and fixing ORISSA PAN IWC with integral type foot rest of Cat. No. 20004-HINDWARE or equivalent make etc., withwith Metropole Flush Valve Regular 40mm Size (Concealed Body) with Exposed Shut Off Provision &100mm Square Plate (Reference no FLV-1093NSQ) including 15mm Health Faucet (Reference Cat.no. 573) with 8mm Dia,1.2 Meter Long Flexible Tube & Wall Hook including cutting and making good the wall , floors wherever required and making connecting to the water supply and sanitary pipe lines with required etc., complete as per direction of Engineer-in-charge.

Providing and fixing Urinal Basin of Size 340X325X650 mm with Fixing Accessories (Reference Cat. No.URS-WHT-13263), along with Electric Operated sensor Flushing system of Size:28 x 34.5 x 69 cm (Reference Cat No: 500963) with standard inlet and outlet pipe connections,making necessary electrical connections etc. including cutting and making good the walls and floors wherever required and servicing the unit etc. complete as directed by Engineer in charge.(Jaquar /Hindware or Equivalent make).

Providing and fixing of curve shaped urinal partition of standard size 450 mm (W) x 1000 mm (H) of approved make, with 12 mm thick compacted HPL board made from layers of kraft paper core treated with phenolic resin and top design paper treated with melamine resin, compressed under a high temperature and pressure, having density >1400kg/cum and comply with EN438, IS-2046 staandard and BS 476/96 for fire standard, HPL board shall be antifungal, antibacterial and resistant to impact, scratch, heat, chemical and water and the partition is anchored to the wall using sturdy L-Shaped SS 304 grade brackets. SS 304 grade hardware etc complete all as per the direction of Engineer-In-Charge. (Note : The rate shall includes hardwares like non corrosive inserts of Adjustable Clamps and SS fixture etc)

Providing and fixing Thin Rim, oval shape, table top wash basin of EDGE 45 R star white of size 500 x 380 x 120 mm (Reference cat. No. JDS-WHT-25937) with CP pillar cock (Reference Cat. No.: OPP-15001PM) , Angular stop cock with wall flange (Reference Cat. No.: OPP-15053PM), Waste coupling with Click Clack Waste 32mm Size Full Thread With 80mm Height (Reference Cat. No.: ALD-727), Bottle Trap 32mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange (Reference Cat. No.: ALD-769L 300x190) etc. cutting and making good the walls wherever required etc., complete as directed by Engineer in charge.(Jaquar /Hindware or Equivalent make).

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board over all size 1000mm x 510 mm, Bowl size 460x410x200 mm of Nirali Elegance / Franke / Futura or Equivalent Medium range with Sink Cock with Swinging Spout (Wall Mounted Model) (Ref cat no: CQT-23347) of Jaquar or Equivalent.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe 32 mm dia

Providing and fixing 6 mm thick bevelled edge mirror of SAINT GOBAIN or equivalent make stainless steel fixtures like studds etc., complete

Providing and fixing Jaguar or equivalent make bib cocks Ref Cat no: CON-037KN with Wall Flange etc complete.

Providing and fixing Jaguar or equivalent make two way bib cocks (Ref Cat no: LYR-38041) with Wall Flange etc complete.

Providing and fixing 15 mm nominal bore CP angular stop cocks of Jaquar make, Continental range (Ref Cat. No.CON CHR-053 KN) etc. complete.

Providing and fixing 15 mm nominal bore Exposed Part Kit of Concealed Stop Cock & Flush Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange of Jaquar make (Cat. No. OPP-15083KPM) etc. complete.

Providing and fixing Wall mount Liquid soap Dispenser (Reference Cat No SDR-WHT-DJ0010F) of Jaquar / Hindware or equivalent make with matching colour CP screws etc complete.

Providing and fixing Stainless Steel Single Towel Rail 600mm Long of Jaguar or equivalent make Ref cat no. ACN-1111SM with matching CP screws etc complete.

Providing and fixing towel ring of jaguar make (CAN-1121-BN) or approved equivalent with necessary screews etc complete

Providing and fixing ball valve P.V.C of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore

Providing and fixing CPVC gate valve of approved quality:32 mm nominal bore.

Providing and fixing CPVC gate valve of approved quality:25 mm nominal bore.

Providing and fixing CPVC gate valve of approved quality:20 mm nominal bore.

Providing and fixing 100 mm inlet and 75 mm outlet PVC trap with stainless steel grating (with or without hole for PVC waste pipe of CHILLY/NOWAY make) including the cost of cutting and making good the walls and floors.etc.,Complete as per directions of Engineer-in-charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.15 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.External work 15 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.20 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.External work 20 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.25 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.External work 25 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.32 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.External work 32 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.External work 40 mm nominal dia Pipes

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With Fly ash bricks of class designation 5.0

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:150 x 100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing brick masonry road gully chamber 110x50x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm precast R.C.C. horizontal grating with frame and vertical grating complete as per standard design : With fly ash bricks of class designation 5.0

Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :For pipes 100 to 250 mm diameter

Providing and filling cinder concrete in floor depressions, mixed with approved quality sand and cement in reqisite proportions to uniform consistency using optimum quantity of water, spreading and compacting to the desired level etc., complete.

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. For horizontal and vertical surface one coat @1.10 kg per sqmcrystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 5 years against any leakage. For horizontal and vertical surface one coat @1.10 kg per sqm

Supplying and applying single component, elastomeric 100% pure polyurethane coating, which is free from bitumen & tar and meets the requirement as per ASTM C 836-18, having elongation of 400% (As per ASTM D412), Tensile strength greater than 2MPa (As per ASTM D 412), Tear strength greater than 15 N/mm (As per ASTM D 624), Water Vapor Permeability greater than 25 gm/m2/day (As per ISO 9932:91), Adhesion to concrete more than 1.5 N/mm2 (As per ASTM D4541), Resistant to plant roots as per UNE CN/TS 14416, applied with a total consumption of 2.3 Kg/Sqm to achieve a minimum of 1.5 mm system DFT to satisfy the requirements of LAM as per ASTM C898, including reinforcing the coating with 45gsm glass fibre mesh at all corners and change in directions. The coating shall be continued to the entire horizontal area and should be terminated at 300mm above FFL over the vertical surface as per manufacturers specification and methodology. The system includes base preparation of cleaning, brushing and removal of flacky materials, grouting the porous area with cementitious grout, proper coving between slab and wall junctions and priming the surface with high moisture insensitive epoxy primer applied with a total consumption of 200 gms/Sqm, followed by application of polyurethane coating in two coats. Approved Makes: Dr. Fixit, BASF, SIKA Mode of Measurement : Actual area Treated Protection to the waterproofing system: Supplying and applying protective geo textile fabric of 120 GSM over the entire membrane with proper overlaps. including khurras making with finishing.

Supplying and applying an M20 grade concrete screed including saw cuting (approx 6mm W x 10 mm D) at 3MX4M panels and filling the groove with PU sealant, and making angle fillet of 100mmX100mm using M20 grade concrete at the corners.etc., complete as directed by Engineer in charge.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using alvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.With fully perforated 12 mm thick micro tegular edged or 10 mm thick square edged GRG false ceiling tiles.

Providing and fixing seamless ceiling with gypboard 12.5mm thick.fixed to the underside of the suspended grid formed of GI perimeter channel of size 20X27X30 mm (MF 6A) fixed along the wall by using wood screws and metal expansion rawl plugs. The GI intermediate channel of Size 45X15X0.90 mm (MF7) Shall be fixed to the suspended strap hanger/GI ceiling angle at intervals not more than 12220mm. The suspended GI ceiling angle/strap hanger is to be connected with GI soffit cleat of size 37X27X25X1.6mm and it should be fixed on the roof slab/beam, by using metal epansion fastenes(wt. Type) of 12.5 mm dia. to a length of 35 mm with 6 mm dia bolt/sctew at top ends. the GI ceiling section of size 80X26X0.5 mm (MF 5) is to be provided across the intermediate channel at intervals not more than 610mm centres at bottom and the same shall be fixed by GI connection clips 2.64 mm dia at the intersection points. the ends of ceiling section (MF 5) channel by adopting an overlap length of minimum 150mm , Shall be connected with intermediate channel perimeter "channel in insertion the gypboard shall be fixed to the under side o fthe suspended grid by using 25mm long dry wall screws. The joints shall be finished with joint paper/fibre mesh tape by using jointing compound of SAINT-GOBAIN Ltd., and applying over it 3 layers of the filler compound to provide a smooth surface. The rate shall include making cutouts for tube lights, spot lights, duct doors, for specified size, grills etc., for which no extra will be paid separately. Rate shall include providing additional trimming around cutouts for light fitting grills and also for providing additional supports from ceiling where main/cross member are cut for light fittings etc. This false ceiling shall be provided in combination of 600X600 calcium silicate false ceiling and will be measured under respective item.

Providing and fixing 125mm thick Gypsum board partition which includes two layer of tapered edge 12.5mm thick Gypsum board on both sides (conforming to IS 2095 part 1:2011) and fixed with Drywall screws of 25mm & 35mm at minimum spacing of 300mm at centre and 150mm at periphery of wall to either side of 70mm stud (0.5mm thick having one flange of 34 mm and another flange of 36 mm made of GI steel) placed at 610mm centre to centre in 72 mm floor and ceiling channel ( 0.5 mm thick have equal flanges of 32mm made of GI steel), which is anchored to the floor & true ceiling using screws, wood plug or pvc plug at 600mm c/cin centre line. stud and floor channel are fixed together with screwa mechanical tool. The board are to be fixed verticall to the framework with joint staggered to avoid leakage through joints. finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing jointingcompound, joint paper tape as per manufactures speifications. (Note : actual area of partition provided excluding door/window openings will bbe measured for payment. Rate to be quoted shall be for the complete finished work with all materials and labour including providing additional members with hard wood fame work around openings.)

Providing and fixing steam beach wood skirting, beading etc with half rounded either on one side or on both sides of size 125mm x 12mm, jointed, fixed to Gypsum board partition/ wooden wal panelling etc with required size and type of screws / nails and finished with two or more coats of melamine spray polish over and above two or more coats of french spirit polish etc. complete.

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :300 mm dia. R.C.C. pipe

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :450 mm dia. R.C.C. pipe

Providing and fixing 4mm thick aluminium composite panels of for external wall and column cladding as per drawing with necessary steel/wooden scaffolding in combination of solid / metallic colours including necessary frame work of size 50mmx50mmx2mm provided in vertical direction and horizontal direction complete Aluminium composit panel should consistof 3 mm thermoplastic core of anti-toxic LDPE sandwiched between 2 skins of 0.5 mm thick aluminium sheet making a total panel thickness of 4mm. The surface will be finished with PVdF based coating on exterior surfaces and service coating on reverse side would be Polyester paint. The system shall be fixed using GI brackets or aluminium brackets and stainless steel bolts and nuts complete with spring washers and cap nuts and all other necessary accessories. The bracket support shall be designed as per manufacturer’s specification.Seating shall be done, using weather sealant of Dow corning 789 make with Baker rod etc complete. (Note:Shop drawing/fabrication drawing shall be furnished for approval before starting of the work. The area of ACP cladding as seen in elevation shall be measured for payment. Rate shall be inclusive of all other materials, necessry hardware, scaffolding, aluminium framework as per requirement and as per the specifications/drawing.)

Supplying & Installing of Full height Single Glazed Partition with Proprietary anodized aluminum partition system size of 45mm x 25mm approved aluminium section using alround perimeter,size of 25mm x 25mm approved aluminium section thickness of 4mm using horizontally @ 604 mm c/c as per details.The glazing to be formed out of 12mm thick toughened glass of approved make toughened clear glass panels as per drawing. The glass to be butt jointed with 2 to 3 mm edge chamfer & edge polishing all around. The butt joint of the glass shall be sealed using 3M glass to glass joint tape. Contractor has to consider the cost of edge polish, chamfering of the glass & sealing the glass joints with transparent silicon sealant in his quoted rate. (Note:Visible elevation area shall be considered for Payment).

Providing and fixing aluminium semi-unitized structural glazing system at any height or level consisting of double glazing of approved make with necessary steel/wooden scaffolding for Straight or curved portions as per design. The framework shall be provided and fixed using main frame work of verticals made out of specially designed extruded aluminium sections of size 131.67 x 67 x 2mm and horizontal members of size 81.16 x 67 x 2mm with transom sections of suitable size to withstand a wind pressure of 150 kg./Sqm. The extruded aluminium sections shall be provided at every 1100mm (approx.) in vertical direction and 1600mm (approx.) in horizontal direction and shall be finished with electrolytic anodic coated of approved colour anodic coating (minimum 15 microns and at 3.68 kg. per Metre). The extruded section shall be of 6063 Alloy conforming to IS-63400.The frame shall be properly fixed to RCC memebers/Stone masonry walls/Brick masonry walls with necessary clamps,fastening straps, nuts, bolts, rivets, washers etc. and shall be of stainless steel or aluminium. The structural glazing system shall be provided with EPDM / Neoprene triple barrier, extruded weather strip to ensure water and air tightness. The structural glazing system shall be designed to suit single/double glazed air pressure equalisation principle and with concealed continuous horizontal gutter at each floor to attain self-drainage and water tightness. The glazing system shall be designed to accommodate thermal movement of the aluminium components and glass resulting from exterior skin temperature from 5 Deg.C. to 80 Deg.C. and interior temperature of 5 Deg.C to 30 Deg.C.structural glazing shall consist of 6 mm thick coated glass + 12mm airgap+ 6mm thick clear glass (Approved colour, Planitherm VLT: 63% and SHGC: 0.4% of Saint Gobian make) hermetically sealed with Structural Silicone Sealant. (Note:Shop drawing/fabrication drawing shall be furnished for approval before starting of the work.The area of structural glazing as seen in elevation will be measured for payment. Rate shall be inclusive of all other materials,hardware,scaffolding,aluminium framework as per the specifications. Necessary Deduction will be made for aluminium louver portion)

Providing and fixing concept based mural using different materials like metal, Terracota, glasss, synthetic plaster, POP etc for external wall for the size mentioned in the drawing. The concept may be submitted to BEL and obtain the clearence before commensment of work.

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.

Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-in-charge. the joints shall be of extruded aluminum base members with, self aligning and self centering arragement support plates as per AStm B221-02. the system shall be such that it provides watertight roof to roof/roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. System shall consist of metal profile that incorporates an universal aluminum base member designed to accommodate various project conditions and roof treatments. the cover plate shall be designed of width and thickness required to satisfy movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates / moves in all directions. the Self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement.the Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of moisture Barrier membrane in the Joint System to have water tight joint is mandatory requirement. (material shall conform to AStm 6063).roof Joint of 100 mm gap

Providing and fixing pre-moulded joint filler in expansion joints of RCC roads / CC pavements after making the joints dust free with high pressure air jet cleaners, all complete as per direction of the Engineer-in-Charge. (Pre-moulded joint fillers shall be made of bitumen hot sealing compound impregnated fibre board having impregnation more than 35%, conforming to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound grade A.)

Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick & 15 mm dia , at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-charge.Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron)

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approve size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. (Basic price of Interlocking paver is Rs 400 per Sqm)

Providing and Fixing Pre cast cement Concrete Kerb stones M-20 Grade of size 600 x 450 x 125 mm as per approved sample, and laying in position to the required line, level and curvature over 75mm thick PCC 1:4:8 jointed with cement mortar 1:3 (1 cement : 3 coarse sand) including making joints with or without grooves and providing a coat of exterior grade primer and two coats of exterior grade emulsion (thickness of joints except at sharp curve shall not be more than 5mm) including making drainage opening whever required etc complete.

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres.

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge.

Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinaljoints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (the rate including joint fillers, sealants and the dowel bars with sleeve/ tie bars to be paid separately). Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately. Cement concrete manufactured in automatic batching plant (RMC plant) i/c transportation to site in transit mixer

Providing and fixing approved make 100 mm wide vertical blinds made out of 100 mm non-woven fabric. The fabric shall be scotch guard protected, antistatic and shall be sanitized to resist fungal growth. The head channel shall be of 33 mm wide and 30 mm deep with a minimum wall thickness of 1.2 mm extruded from 6063-T5 aluminium alloy finished in clear anodising to a thickness of 10 microns (Note: Height of the blind will be measured from top of the head rail to bottom of slat. length of the head rail shall be measured to the length of the blind) etc., complete

Providing and fixing GRORICH make roller blinds made up of 100% polyster/glass fibre yarns and backed with a transparent color acrylic/PVC coating.The tube shall be of 32mm dia.with a minimum wall thickness of 1mm duly anodized.clutch shall be wrap spring design aith high strength fibre glass reinforced polyster assembly.Bottom of the blinds shall be provided with aluminium tube powder coated.The fabric shall be inserted in the suitably created pocket alongwith the tube.(Note: The rate to be quoted shall be for the complete finished work.actual area of the blind from top of the roller tube to bottom tube will be measured for payment)

Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329:100 mm dia Ductile Iron Class K-7 pipes

Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and the cost of rubber gasket:100 mm dia pipes

Supplying and fixing non-reflective type of vinyl signage boards with ACP sheets of 4 mm thick of approved quality and of required shade etc complete as directed by Engineer-in-charge.

Providing, supplying and fixing 3D exterior grade (304 grade) stainless steel letters of golden colour, of approved quality and brand, fabricated to required size/shape to the exact dimensions and fonts as per design using laser cutting technique, the letters shall be 1" thick and size of english letter shall be 8.5" and size of hindi letters shall be 7.75" (without MATRA) and 10" with MATRA approx approx as per approved. The letters shall be fixed on the ACP Sheet board made of iron frame structure 1.5" x 1.5" pipe and black ACP Sheet fixed on it. (The approximate board dimension will be 12' x 2.5' )

Supplying and fixing 4mm thick poly carbonate sheet covering over M.S frame work with neoprene gasket and alulinium beading / clips and all accessories etc, all as per drawing or as directed by the engineer in charge etc. complete. (Note:MS frame work will be measured and paid seperately.)

Supplying Nitto bond and applying on the existing concrete surfaces by chipping, cleaning and necessary preparation at the roof joints whereever necessary as directed by EIC

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Dismantling carefully the existing surkhi / liime concrete along with clay tiles/ bitumen/ tarfelt sheets of any thickness from the roof tops including disposing the debris away from the company premises beyond 10 kms etc., complete ( Note: The removed debris shall immidiately be carted away/disposed off on the same day through tractors/lorries or any other means to avoid dust accumulation. Rate quoted shall be inclusive of all the operations as specified. Area of terrace in sqm shall only be measured for payment).

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar

Dismantling existing tile / granite work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :15 mm to 40 mm nominal bore

Dismantling carefully the existing CPVC pipes of any dia including removal of clamps, fittings etc, handed over the serviceable material to the civil estate store and disposal of unserviceable material away from the site permices at any lead as directed by Engineer-In-Charge

Dismantling carefully the existing PVC downtake rainwater pipes of any dia including removal of GI/PVC clamps, bends, shoes, collar, elbow etc, handed over the serviceable material to the civil estate store and disposal of unserviceable material away from the site permices at any lead as directed by Engineer-In-Charge

Dismantling carefully the existing polycarbonate sheet of any thickness including removal screews, clamps and any other jointing material etc, handed over the serviceable material to the civil estate store and disposal of unserviceable material away from the site permices at any lead as directed by Engineer-In-Charge

Removal and Refixing of existing PVC tank and stacking at site including dismantling of existing water lines as directed by Engineer-In-Charge

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area beyond 3 sq. metres

Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red bajri and labour required.bituminous portion

Providing and erecting 2.00 metre high temporary barricading at site; each panel of size 2.50mx2.00m made of 40x40x6mm angle iron or 50x50x3mm hollow MS tube posts/horizontal members/ bracings covered with 1.63mm thick MS sheet. The sheet shall be fixed with 30x5mm MS flat by suitable welding/riveting. The panels shall be made so that gap of 50cm above the ground is available making overall height as 2.5m. MS channel ISLC 75 @ 5.70 kg/m, 50cm long shall be provided at the bottom having oval shaped holes of size 50x25mm at both ends with 50cm long MS angle 40x40x6mm bracing. Suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250mm long expansion fasteners at both ends. The work shall be executed as per drawing/direction of Engineer-in-Charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in-Charge. The barricading provided shall be retained in position at site continuously i/c shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be removed without prior approval of Engineer-in-Charge. (Note :- One time payment shall be made for providing barricading from start of work till completion of work i/c shifting. The barricading provided shall remain to be the property of the contractor on completion of the work).

PART-B ELECTRICAL WORKS

Design, fabrication, supply, installation, testing and commissioning of MAIN PANEL conforming to IEC-61439 & IEC-61641 standard complete as per enclosed drawing (SLD) & detailed technical specifications suitable for 440Volts, 50Hz, 3phase, 4wire AC supply with fault current 50kA/0.3sec. In general the panel shall be of TTA modular type, floor mounting, free standing, vermin proof, indoor/outdoor duty, made out of CRCA sheet steel with powder coated painting having aluminium busbars, DMC/ SMC/ FRP insulators etc with copper cables for interconnections as shown in drawing & DTS. Incomer & buscoupler feeders shall have ACBs/MCCBs of appropriate rating with interlocking, digital metering, protection systems, SPDs, LED indication lamps etc as applicable and as shown in drawing. The outgoing feeders shall have MCCBs/ MCBs/ Motor Starters/Contactors as applicable of appropriate rating along with digital meters, LED indication lamps etc as applicable and as shown in the drawing. The item includes providing of required fixing accessories such as grouting bolt-nuts, C-channel base/ MS stand, welding etc for coupling of already laid cables/conduits and associated civil works complete as directed by EIC. Note:- Please refer drawing/SLD and DTS for complete Panel details. GA & shop drawing of the panel shall be submitted to EIC-BEL for approval before commencement of fabrication.

Design, fabrication, supply, installation, testing and commissioning of OUTDOOR PANEL conforming to applicable standards, rain protected IP-55 grade, complete as per enclosed drawing (SLD) & detailed technical specifications suitable for 440Volts, 50Hz, 3phase, 4wire AC supply. In general the panel shall be of modular type, floor mounting, free standing, vermin proof, indoor/outdoor duty, made out of CRCA sheet steel with powder coated painting having aluminium busbars, DMC/ SMC/ FRP insulators etc with copper cables for interconnections as shown in drawing & DTS. Incomer feeders shall have MCCBs of appropriate rating with interlocking, digital metering, protection systems, SPDs, LED indication lamps etc as applicable and as shown in drawing. The outgoing feeders shall have MCCBs/ MCBs/ Motor Starters/Contactors as applicable of appropriate rating along with digital meters, LED indication lamps etc as applicable and as shown in the drawing. The item includes providing of required fixing accessories such as grouting bolt-nuts, C-channel base/ MS stand, welding etc for coupling of already laid cables/conduits and associated civil works complete as directed by EIC. Note:- Please refer drawing/SLD and DTS for complete Panel details. GA & shop drawing of the panel shall be submitted to EIC-BEL for approval before commencement of fabrication.

Supply, installation, testing and commissioning of 60 kVA online modular UPS with SMF batteries for a backup of 30 mins, SNMP card completely as per detailed technical specification. The UPS shall be suitable for 415V TPN input and shall have 415V TPN pure sine wave output. The UPS shall have minimum 2nos of hotswappable power modules & 120kva frame with Microprocessor controlled IGBT based Voltage Frequency Independent Technology with static bypass switch to directly feed the AC power to server systems in case of failure of UPS. The rate quoted includes batteries, battery rack, DC breakers, interconnecting cables etc. complete set. Please refer the Detailed Technical Specification (DTS) for further details. OEM Technical specification & drawing of the UPS shall be submitted to EIC of the project for approval before initiating for procurement.

Supply, Installation, testing & commissioning of 8PASSENGER MRL LIFT, capacity around 544kg, 1 m/sec speed, G+2 floor, VVVF Control, machine room less (MRL) Simplex type having Stainless steel Car cabin & Control panel, car bottom springs for safety cussions and all other required equipments & accessories conforming to statutory norms and as per detailed technical specifications, approved GA & shop drawings etc all as specified and or as directed. The item includes all interfacing civil works, electrical works, providing scaffolding, supporting systems etc., necessary for the installation & operation and also obtaining statutory approval from respective govt. authorities and handing over the same to EIC-BEL. Note: The rate of lift quoted under this item to be considered is inclusive of freight, insurance, loading, unloading, handling and any other incidental charges and shall be for "For site" The Vendor shall submit the GA & detailed shop drawings of OEM to EIC-BEL for approval with in 30days of commencement of civil works and arrange to finalise the order for the Lift. The Vendor shall make arrangements to obtain the inspectorate approval at his cost and the statutory charges payable only will be reimburshed by the company on submission of documentary proof.

Supplying, installation, testing and commissioning of 250kg capacity Dumb Waiter elevator suitable for Ground+2 floors, machine room less type, Speed : 0.25 Mps, 3 stop, car enclsoure:SSHL304, suitable size Car, landing : Vertical bi parting S.S doors, Suitable size Door, Shaft Area : 2000 (W) X 2000 (D) or as per drawing, Accessories : S.S. chequered plate flooring (3 mm thick sheet) ,Push Button ( landings), Digital display, Light in car,limit Switches of top & Bottom, & Overload device.Packing & forwarding + Freight (INCLUDED) completly conforming to statutory norms and as per DTS. Please refer our drawing & DTS for details. GA & shop drawing from the OEM is to be submitted for Approval to EIC-BEL before commencement of manufacturing.

Supplying and fixing of Lift control panel with switch gears & other components as mentioned below including suitable copper busbars, interconnection cables, line indication lamps & accessories complete. The panel shall have hinged doors and to be made out of 1.5mm thickness CRCA sheet with powder coated painting. The panel shall be installed as recessed/ partly recessed in wall by providing fixing accessories such as wooden plugs, bolt-nuts, screws, coupling of the laid conduits/ cables, making electrical connections etc., including associated civil works complete as per drawing/statutory requirement and as directed. a) 63A, 4pole, MCB(D-curve)- 1 No. for ingoing. b) 63A 4pole, 100mA RCCB - 1 Nos. for ingoing. c) Digital Multifuction meter with CTs - 1 Nos. d) 40A 4pole, 30mA RCCB - 2 Nos. for outgoing. e) 10A SP MCB (D-curve) - 3 Nos. for out going. f) 6A/16A 3pin socket with 16A SP switch - 01 set. g) LED indication lamps for R,Y,B with TP MCB- 01 set. Note: Please refer drawing for further details.

Supply & Wiring for LMS controlled first light point of the circuit (group) from MCBDB with 3x2.5sq.mm FRLS PVC insulated copper conductor single core cable including suitable size surface / recessed medium class PVC conduit pipes with accessories as required. (Switch control not required)

Supply & Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable including surface / recessed medium class PVC conduit pipes, modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Supply & Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable including surface/ recessed medium class PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm dia size (IS approved make)

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm dia size (IS approved make)

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 32 mm dia size (IS approved make)

Supply & Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable including surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Supply & Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable including surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc as required.

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 20 mm dia size

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 25 mm dia size

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 32 mm size

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 x 1.5 sq.mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 x 2.5 sq.mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 x 4 sq.mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 x 6 sq.mm

Supplying and fixing 20 mm dia GI flexible pipe with all ancillaries and accessories like coupler etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 Amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 amps modular switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 amp modular switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 amp modular socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 amp modular socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 1 or 2 module (75mm x 75mm) box

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 3 module (100mm x 75mm) box

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 4 module (125mm x 75mm) box

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 6 module (200mm x 75mm) box

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 8 module (125mm x 125mm) box

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc., as required. 12 module (200mm x 150mm)

Numbering of ceiling fan/ exhaust fan/ fluorescent fitting with vinyl stickering as required.

Supply and laying of 20mm dia steel wire reinforced corrugated flexible PVC conduit along with accessories as required

Supply and laying of 25mm dia steel wire reinforced corrugated flexible PVC conduit along with accessories as required

Supply and fixing of oversized round PVC cover on conduit junction box with screws as directed by EIC

Supplying and fixing of following ways, Vertical type, 415 V, TPN MCB distribution board made of sheet steel, dust protected and duly powder painted, on surface/ recess complete with 250 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs and slot with screws for mounting MCCB incomer, including earthing etc. as directed by EIC. (but without MCBs and MCCB ) 12way (MCCB+36) VTPN DB, IP-43 with Metal door

Supplying and fixing of following ways, Vertical type, 415 V, TPN MCB distribution board made of sheet steel, dust protected and duly powder painted, on surface/ recess complete with 250 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs and slot with screws for mounting MCCB incomer, including earthing etc. as directed by EIC. (but without MCBs and MCCB ) 8way (MCCB+24) VTPN DB, IP-43 with Metal door

Supplying and fixing of following ways, Vertical type, 415 V, TPN MCB distribution board made of sheet steel, dust protected and duly powder painted, on surface/ recess complete with 250 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs and slot with screws for mounting MCCB incomer, including earthing etc. as directed by EIC. (but without MCBs and MCCB ) 6way (MCCB+18) VTPN DB, IP-43 with Metal door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way (8 + 12), TPNDB Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way (8 + 18), TPNDB Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way (8 + 24), TPNDB Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole MCB.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole MCB.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole MCB.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole and neutral MCB.

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing of 32A or 40A, FP, 300mA RCCB, 415 V, circuit breaker in the existing MCB DB complete with connections, testing and commissioning etc. as directed by EIC.

Supplying and fixing of 63A, TP (Triple pole) MCB, 415 V, 10 kA, "C" curve, miniature circuit breaker in the existing MCB DB complete with connections, testing and commissioning etc. as directed by EIC.

Supplying and fixing of 63A, TPN (Triple pole + Neutral) MCB, 415 V, 10 kA, "C" curve, miniature circuit breaker in the existing MCB DB complete with connections, testing and commissioning etc. as directed by EIC.

Supplying and fixing following rating and breaking capacity MCCB with thermomagnetic release, phase barriers and terminal spreaders in existing VTPN Distribution board, making connections, including accessories etc. as directed by EIC. TPN MCCB 160A, 16kA,

Supplying and fixing following rating and breaking capacity MCCB with thermomagnetic release, phase barriers and terminal spreaders in existing VTPN Distribution board, making connections, including accessories etc. as directed by EIC. TPN MCCB from 32A to 100A any rating, 16kA,

Supplying of non-metalic IP-44 grade 20A, 240V, 2P+E socket outlet along with suitable Plug top & 20A, 10KA-Curve SPN MCB, including suitable outdoor duty non corrosive enclosure and fixing of the same on surface or in recess, with complete accessories, connections, testing and commissioning etc. as required.

Supplying of non-metalic IP-44 grade 32A, 240V, 2P+E socket outlet along with suitable Plug top & 32A, 10KA-Curve SPN MCB, including suitable outdoor duty non corrosive enclosure and fixing of the same on surface or in recess, with complete accessories, connections, testing and commissioning etc. as required.

Supplying of non-metalic IP-44 grade 63A, 440V, 2P+E socket outlet along with suitable Plug top & 63A, 10KA-Curve TPN MCB, including suitable outdoor duty non corrosive enclosure and fixing of the same on surface or in recess, with complete accessories, connections, testing and commissioning etc. as required.

Supplying of following rating and breaking capacity MCCB with thermomagnetic release, phase barriers, terminal spreadders along with suitable powder coat painted sheet steel enclosure box and fixing of the same on wall by providing required grouting bolt-nuts, making connections, including accessories etc. as directed by EIC. TPN MCCB 160A, 16kA with sheet steel enclosure.

Supplying of non-metalic IP-42/66 grade 125A, 440V, TPN+E socket outlet along with suitable Plug top & 125A, 10KA-Curve TPN MCB, including suitable outdoor duty non corrosive enclosure and fixing of the same on surface or in recess, with complete accessories, connections, testing and commissioning etc. as required.

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supply, installation, testing & commissioning of microcontroller based 2Timer DB for sequential operation of ACs in CRCA sheet enclosure for auto change over of running and standby high wall split AC's as per preprogrammed time intervals. Controller shall be supplied with inbuilt RS 485/ethernet port for communication. The controller shall be suitable for controlling of minimum 4 AC's (2W+2S) suitable to program at site during installation. Refer drawing (SLD) for details.

Supplying of below mentioned specification white LED luminaire with OEM warranty of minimum 03 years and fixing of the same as recess in false ceiling/ surface type by providing required down rod/ chainlinks/ suspension kit, clamps, screws/ anchor bolt-nuts, washers etc., making electrical connections, earthing etc., as directed by engineer-in-charge. Type: 2ft x 2ft size with DALI Driver. Mounting type :- Recess in false ceiling Body :- CRCA/PDC housing with diffuser cover Input power :- Minimum 36Watts Efficacy: Minimum 120 Lumens/watt Ref :- HAVELLS (Dali compatible with above specification)

Supplying of below mentioned specification white LED luminaire with OEM warranty of minimum 03 years and fixing of the same as recess in false ceiling/ surface type by providing required down rod/ chainlinks, clamps screws/ anchor bolt-nuts, washers etc., making electrical connections, earthing etc., as directed by engineer-in-charge. Type: Round down light with DALI Driver Mounting type :- Recess in false ceiling Body :- Pressure die cast AL housing with diffuser. Rated power :- Minimum 18Watts Efficacy :- Minimum 100 Lumans/watt Ref : HAVELLS (Dali compatible with above specification)

Supplying of below mentioned specification white LED luminaire with OEM warranty of minimum 03 years and fixing of the same as surface/suspened by providing required, suspension kit, clamps screws/ bolt-nuts, washers, etc., making electrical connections etc., as directed by engineer-in-charge Type: Suspension Type Circular LED luminaire. Mounting type :- Suspension mounting type Body: CRCA/ AL housing with diffuser cover Rated power :- Minimum 34/36 Watts Ref model :-HAVELLS MONDO

Supplying of below mentioned specification white LED luminaire with OEM warranty of minimum 03 years and fixing of the same as recess in false ceiling/ surface type by providing required down rod/ chainlinks, clamps screws/ anchor bolt-nuts, washers etc., making electrical connections, earthing etc., as directed by engineer-in-charge. Type: Round down light LED luminaire Mounting type :- Surface mounting type Body :- PC/AL/PDC housing with diffuser. Rated power :- Minimum 6Watts Ref :- HAVELLS-VIBE TREND SURFACE ROUND

Supplying of below mentioned specification white LED luminaire with OEM warranty of minimum 03 years and fixing of the same in the ceiling/Wall surface by providing required, clamps screws/ anchor bolt-nuts, washers, TW guttas etc., making electrical connections, earthing etc., as directed by engineer-in-charge Type :- 4ft LED Batten luminaire Mounting type :- Surface mounting Body: Extruded aluminium with diffuser cover Rated power :- Minimum 18W/ 20 Watts Ref model :- HAVELLS- LUMILINE PLUS NEO

Supplying of below mentioned specification white LED luminaire with OEM warranty of minimum 03 years and fixing of the same in the ceiling/Wall surface by providing required, clamps screws/ anchor bolt-nuts, washers, TW guttas etc., making electrical connections, earthing etc., as directed by engineer-in-charge Type: 2ft LED Batten luminaire (as mirror light) Mounting type :- Surface mounting Body :- Extruded aluminium with diffuser cover Rated power :- Minimum 9watts/ 10 Watts Ref:- HAVELLS-LUMILINE PLUS NEO

Supplying of below mentioned specificationwhite LED luminaire with OEM warranty of minimum 03 years and fixing of the same in the ceiling/Wall surface by providing required, clamps screws/ anchor bolt-nuts, washers, TW guttas etc., making electrical connections etc., as directed by engineer-in-charge Type: Weatherproof luminaire Mounting type :- Surface mounting Body :- Polycorbonate IP-66 with diffuser cover Rated power :- Minimum 18 or 20 Watts Ref model :-HAVELLS-MAGNUM GRAND GOLD

Supplying of below mentioned specification white LED luminaire with OEM warranty of minimum 03 years and fixing of the same in the ceiling/Wall surface by providing required, clamps screws/ anchor bolt-nuts, washers, TW guttas etc., making electrical connections, earthing etc., as directed by engineer-in-charge Type: IP-66 Bulk head luminaire Mounting type :- Surface mounting Body :- PC/AL/ PDC housing IP-66 Rated power :- 9watts or 10 Watts Ref model :- HAVELLS-HEXA 10W-IP66

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor with speed regulator, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.00, Air delivery minimum 210 Cum/Min, 365 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. Ref make: Havells- Efficiencia DX BLDC

Supplying, installation, testing and commissioning of 300 mm sweep, single phase, duly painted / powder coated metal body heavy duty exhaust fan with mesh cover/ automated shutters, accessories, suitable size bolt & nuts/ screws, including making wall opening and plastering, electrical connections, earthing etc., complete as directed by EIC. The electrical connections shall be made by providing suitable size PVC insulated flexible copper cable from already provided ceiling rose. Ref: Havells-Turbo force SP

Supplying and fixing of Box type fan clamp/hook made out of GI sheet & 8mm dia MS bar bent to 'U' shape and hooking ends to reinforcement rods in RCC slabs etc before casting of concrete all as required & directed.

Supplying of Fully automatic Stainless steel body high speed jet hand drier suitable for 230V, 50Hz AC supply, blower integreted with timer cum infrared sensing system and fixing of the same on wall by providing suitable TW guttas, screws, bolt-nuts etc., as directed. Ref Make: Dolphy-304SS/ DAHD0049

Supplying & Laying of following size LT power cable with Aluminium conductor, XLPE/PVC insulation, PVC inner sheathed, armoured, extruded PVC outer sheathed, 1.1KV grade (A2XFY) cable, confirming to IS:7098(part-1) & relevant standards with latest amendments, including laying of the same in existing trenches/duct/pipe/ on the wall/ cable trays with suitable clamps as directed by EIC. 3.5C X 300 Sq mm size.

Supplying & Laying of following size LT power cable with Aluminium conductor, XLPE/PVC insulation, PVC inner sheathed, armoured, extruded PVC outer sheathed, 1.1KV grade (A2XFY) cable, confirming to IS:7098(part-1) & relevant standards with latest amendments, including laying of the same in existing trenches/duct/pipe/ on the wall/ cable trays with suitable clamps as directed by EIC. 3.5C X 240 Sq mm size.

Supplying & Laying of following size LT power cable with Aluminium conductor, XLPE/PVC insulation, PVC inner sheathed, armoured, extruded PVC outer sheathed, 1.1KV grade (A2XFY) cable, confirming to IS:7098(part-1) & relevant standards with latest amendments, including laying of the same in existing trenches/duct/pipe/ on the wall/ cable trays with suitable clamps as directed by EIC. 3.5C X 50 Sq mm size.

Supplying & Laying of following size LT power cable with Aluminium conductor, XLPE/PVC insulation, PVC inner sheathed, armoured, extruded PVC outer sheathed, 1.1KV grade (A2XFY) cable, confirming to IS:7098(part-1) & relevant standards with latest amendments, including laying of the same in existing trenches/duct/pipe/ on the wall/ cable trays with suitable clamps as directed by EIC. 3.5C X 35 Sq mm size.

Supplying of 4core x 50sqmm size flexible multistrand COPPER bright annealed conductor, PVC Insulated, FR PVC sheathed, Industrial Power Cable for working voltages upto 1100 Volts conforming to IS-694:2010 and laying of the same through existing pipes/ ducts/ trenches as directed including end termination with lugs.

Supplying of 4core x 16sqmm size flexible multistrand COPPER bright annealed conductor, PVC Insulated, FR PVC sheathed, Industrial Power Cable for working voltages upto 1100 Volts conforming to IS-694:2010 and laying of the same through existing pipes/ ducts/ trenches as directed including end termination with lugs.

Supplying of 5core x 6sqmm size flexible multistrand COPPER bright annealed conductor, PVC Insulated, FR PVC sheathed, Industrial Power Cable for working voltages upto 1100 Volts conforming to IS-694:2010 and laying of the same through existing pipes/ ducts/ trenches as directed including end termination with lugs.

Supplying & Laying of following size LT power cable with Copper conductor, XLPE/PVC insulation, PVC inner sheathed, armoured, extruded PVC outer sheathed, 1.1KV grade (2XFY) cable, confirming to IS:7098(part-1) & relevant standards with latest amendments including laying of the same in existing trenches/duct/pipe/ on the wall/ cable trays with suitable clamps as directed by EIC. 4C X 16 Sq mm size

Supplying & Laying of following size LT power cable with Copper conductor, XLPE/PVC insulation, PVC inner sheathed, armoured, extruded PVC outer sheathed, 1.1KV grade (2XFY) cable, confirming to IS:7098(part-1) & relevant standards with latest amendments including laying of the same in existing trenches/duct/pipe/ on the wall/ cable trays with suitable clamps as directed by EIC. 3C X 16 Sq mm size

Supplying & Laying of following size LT power cable with Copper conductor, XLPE/PVC insulation, PVC inner sheathed, armoured, extruded PVC outer sheathed, 1.1KV grade (2XFY) cable, confirming to IS:7098(part-1) & relevant standards with latest amendments including laying of the same in existing trenches/duct/pipe/ on the wall/ cable trays with suitable clamps as directed by EIC. 4C X 10 Sq mm size.

Supplying & Laying of following size LT power cable with Copper conductor, XLPE/PVC insulation, PVC inner sheathed, armoured, extruded PVC outer sheathed, 1.1KV grade (2XFY) cable, confirming to IS:7098(part-1) & relevant standards with latest amendments including laying of the same in existing trenches/duct/pipe/ on the wall/ cable trays with suitable clamps as directed by EIC. 3C X 10 Sq mm size.

Supplying & Laying of following size LT power cable with Copper conductor, XLPE/PVC insulation, PVC inner sheathed, armoured, extruded PVC outer sheathed, 1.1KV grade (2XFY) cable, confirming to IS:7098(part-1) & relevant standards with latest amendments including laying of the same in existing trenches/duct/pipe/ on the wall/ cable trays with suitable clamps as directed by EIC. 4C X 6 Sq mm size.

Supplying & Laying of following size LT power cable with Copper conductor, XLPE/PVC insulation, PVC inner sheathed, armoured, extruded PVC outer sheathed, 1.1KV grade (2XFY) cable, confirming to IS:7098(part-1) & relevant standards with latest amendments including laying of the same in existing trenches/duct/pipe/ on the wall/ cable trays with suitable clamps as directed by EIC. 3C X 6 Sq mm size.

Supplying and making end termination of 5C x 6 sqmm Copper Cable with Copper Lugs and double compression brass gland at one end of cable as directed by EIC.

Supplying and making end termination of 4C x 50 sqmm Copper Cable with Copper Lugs and double compression brass gland at one end of cable as directed by EIC.

Supplying and making end termination of 4C x 35 sqmm Copper Cable with Copper Lugs and double compression brass gland at one end of cable as directed by EIC.

Supplying and making end termination of 4or3C x 16 sqmm Copper Cable with Copper Lugs and double compression brass gland at one end of cable as directed by EIC.

Supplying and making end termination of 4or3C x 10 sqmm Copper Cable with tinned Copper Lugs and double compression brass gland at one end of cable as directed by EIC.

Supplying and making end termination of 4or3C x 6 sqmm Copper Cable with tinned Copper Lugs and double compression brass gland at one end of cable as directed by EIC.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade at one end as required. 3½ X 300 sq. mm (70mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 240 sq. mm (62mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade at one end as required. 3½ X 50 sq. mm (35mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade at one end as required. 3½ X 35 sq. mm (32mm)

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 300 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 300 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 300 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 150 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 150 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 150 mm width X 50 mm depth X 1.6 mm thickness

Supplying of PVC DLP trunking system of size minimum 100 mm X 50mm along with base, flexible covers, Partitions (Dividers), endcaps, joints (coupler) , bends, Tees, mounting accessories etc. suitable for fixing of mounting boxes, modular switches & sockets, as required at site and installation of the same on the wall by providing required bolt-nuts/ screws with TW gutties/ fixing accessories as per manufacturers recommendation etc. complete as directed by EIC.

Supplying, laying and fixing of 150 X 38 mm GI raceway of 1.5mm thickness with cover under the floor along with suitable size fixing brackets, couplers, risers and necessary accessories etc. as directed by EIC. Note: The works shall be carried out before floor concreting by taking prior approval.

Supplying and installation of GI Raceway junction box of size 150x150x50mm in the CC floor with cover lid. Ref: Legrand - 6896 83

Excavation for cable trenches or earthpit in normal soil, up to required depth including dressing of sides, including getting out the excavated soil, refilling with good soil after laying of cable/ pipe etc in layers of 20 cm, ramming, watering, levelling and disposal of surplus excavated soil as directed, within a lead of 50 metres etc as directed.

Supplying of all the required materials of approved make and making of conductive concrete encased electrode chemical earthing system. Each set of earthing pit shall consists of a copper bonded solid steel rod electrode of minimum 17.2mm dia x 3.0mtr length conforming to IEC62561-2 with required quantity of nontoxic electrically conductive concrete backfill compound conforming to IEC62561-7, Copper/brass termination busbar & bolt-nuts, washers etc. The work includes drilling/making a hole of about 150mm dia in the ground any kind soil to required depth by manual or mechanized method, keeping the electrode in the centre of the pit, filling the already prepared semi solid slurry of backfill concrete/ compound fully & curing etc. The item also includes all the associated civil works such as excavation, refilling, construction of brick/RCC chamber & cover, plastering, curring etc (Synthetic material chamber of load bearing capacity not less than 50KN also acceptable in place of brick/RCC chamber) . The complete work shall be carried out as per our drawing, detailed specification and manufacturers instructions/ mannuals or as per standard.

Supplying of all the required materials & making of Earthing with COPPER earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required including associated civil works .

Supplying, providing and fixing 25 mm X 5 mm Copper strip from plate earth electrode to earth surface including connection with brass bolt-nuts, spring washer, including excavation for earthpit and re-filling etc. as required.

Supplying/providing and fixing 50 mm X 5 mm COPPER strip on surface with PVC sleeve and support insulators at a interval of not more than one mtr with connections etc. as required. Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm.

Supplying of all the required materials & making of Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required including associated civil works.

Supplying, providing and fixing 25 mm X 5 mm GI strip in suitable pipe from earth electrode to earth surface including connection with GI/SS bolt-nuts, spring washer, including excavation for earthpit and re-filling etc. as required.

Supplying and fixing of 25 mm X 5 mm G.I strip on surface or in recess as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm. (Earth excavation if any to be consided in separte item)

Supplying and laying 25 mm X 5 mm COPPER strip at below ground/ cable duct as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm. (Earth excavation for trench shall be measured & paid separtly)

Supplying/providing and fixing 25 mm X 5 mm COPPER strip on surface with support insulators at a interval of not more than one mtr with connections etc. as required. Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.

Supplying and laying of approved quality and make well burnt bricks breadthwise on top along the already laid cable/sand inside the trench as directed by the Engineer -in charge. (Approx. 09 nos of bricks will be required per Mtr)

Supplying and spreading of clean & dry river sand /M-sand all around the already laid cable in the trench as directed by EIC.

Cutting/Breaking of concrete road/flooring to a required width and depth suitable by machine/manually for laying of pipe/cable. The work includes refilling of excavated earth after the pipes/cables have been laid, laying of available stone , borders, watering, ramming and providing of 150mm thickness1:2:4 cement concrete( PCC).The surface shall be rough plastered suitable for movement of vehicles and required curing to be done. Removed debries shall be cleared from the site immediately as directed. (Note: Excavation and refilling below PCC slab & stone borders shall be measured and paid separately)

Supply, installation, testing and commissioning of Microprocessor controlled One loop analogue addressable Fire Alarm Control Panel with one loop card for all loops, alarm facilities, hooter, fire / fault indications, audio visual signals, battery charger, printer and public address system interface system software, all as specified and or required etc., complete. (Make:Morley only)

Supply, installation, testing and commissioning of Microprocessor controlled TWO loop analogue addressable Fire Alarm Control Panel with 2 loop card for all loops, alarm facilities, hooter, fire / fault indications, audio visual signals, battery charger, printer and public address system interface system software, all as specified and or required etc., complete. (Make:Morley only)

Supplying, installation, testing & commissioning of addressable Multi-criteria smoke detector with builtin LED and mounting base complete with all connections etc. as required. (Make:Morley)

Supplying, installation, testing & commissioning of suitable heat detector complete with mounting base complete as required. (Make:Morley)

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required.(Make:Morley)

Supplying, installation, testing & commisssioning of intelligent addressable programmable sounder/ hooter complete as required.(Make:Morley)

Supplying, installation, testing & commissioning of addressable manual call point complete as required. (Make:Morley)

Supplying, installation, testing & commissioning of fault isolator complete with base as required.(Make:Morley)

Supplying & laying of 2x1.5 sqmm fire armoured cable, 600/1000V rated with annealed copper conductor having XLPE/PVC insulation, steel wire armouring & FRLS outer sheath complete as required.

Supplying, installation, testing & commissioning of 7Watts, LED Exit Signage board with 120 minutes Battery backup

Supply, erection, testing and commissioning of volume control switch suitable for PA system all as specified and/ or directed etc., complete.

Supplying, installation, testing & commissioning of wall mounted speaker 12w in ABS enclosure complete with accessories as required.

Supplying, installation, testing & commissioning of false ceiling mounted speaker (6w) complete with accessories as required.

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel/PVC conduit of following pairs, cores and size including connections and interconnections etc. as required. speaker cable Single pair, 2-core, 1.0 sqmm

Supplying,installation,testing and commissioning of Passive Infrared(PIR) technology based occupancy sensor having high preformance, non regulating programmable type, suitable for connected load upto 10Amp , for mounting height up to 2.8 mtr and for 5 m diameter coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required.

Supply and installation of Din rail mount KNX power supply with the following minimum specifications. (a) Rated input suitable for -230 V ±10%, 50Hz ±10%, (b) Out put voltage 30 V DC, 640 mA, with integrated choke. (c) Quick diagnostics by LED display for short circuit, over load etc. (d) ETS communication objects for monitoring health of the power supply, (e) Analysis of the operating state and the bus line possible by means of software tools. (f) The power supply should cater to 64 decives per line.

Supply and Installation of Auxiliary power supply,din rail mount, with the following minimum specifications, (a) Rated input suitable for 230 V V AC, ±10%, 50Hz ±10%, (b) Output 13 V DC ± 0.5 V for Line coupler or IP coupler. (c) Power supply should also cater to any other devices that need additional DC power supply. (d) Delivers sufficient power for all types of demanding applications with a buffered output voltage of 12 V DC (SELV) (e) a maximum output current of 1600mA.

Supply and installation of KNX Line Coupler/ Area Coupler, Din rail mount device with Electrical isolation from primary to secondary line for interconnecting different lines KNX Lines.

Supply and Installtion of KNX IP gateway, Din rail mount device for routing and tunnelling of KNX telegrams from KNX to IP line and for control & Central monitoring purposes which Connects the KNX bus with the Ethernet network with the following minimum specification, (a) Rated-10…30 V DC (b) Power supply via 12..30 V DC or PoE.

Supply and installtion of surge protection device on KNX line for protection against internal surges on KNX Line on DC side having rated for 24 VDC, 5 kA.

Supply and installtion of KNX cable connectors for loop in and loop out, KNX approved make.

Supply and installtion of KNX-EIB shielded cable 4C cable. Cable should have provision to Carry additional 24V for auxiliary needs along with KNX signals.

Supply and installation of 2CX1.5 Sq mm coppper Flexible DALI cable, 1100V rated FRLS cable in existing conduits or cable trays For Dali ballast control from DALI gateway.

Supply and Installation of 8 Fold KNX Switch actuator, din rail mount, which uses potential free contacts to switch 8 independent electrical loads also provide manual operation (a) for control of 8 individual groups of Lights or any other loads with max 10 A capacity (b) display of the switching state of the contacts. (c) Rated 10 A / 230 V.

Supply and Installation of 4 Fold KNX Switch actuator, din rail mount, which uses potential free contacts to switch 8 independent electrical loads also provide manual operation (a) for control of 4 individual groups of Lights or any other loads with max 10 A capacity (b) display of the switching state of the contacts. (c) Rated 10 A / 230 V.

Supply and Installation of KNX 1 channel Dali gate way, MDRC. (a) Capable of controlling 1 independent dali lines with each 64 individual DALI ballasts control with 16 groups with 16 ballasts each. (b) DALI output for up to 1x64 DALI slaves. (c) Control and status feedback is carried out via KNX per DALI slave (1x64), with groups (1x16), together in broadcast or per scenes (1x16). (d) Extensive fault and error messages are available Self-contained emergency converter (1x64) acc.

Supply and Installation of KNX 2 channel Dali gate way, MDRC. (a) Capable of controlling 2 independent dali lines with each 64 individual DALI ballasts control with 16 groups with 16 ballasts each. (b) DALI output for up to 2x64 DALI slaves. (c) Control and status feedback is carried out via KNX per DALI slave (2x64), with groups (2x16), together in broadcast or per scenes (2x16). (d) Extensive fault and error messages are available Self-contained emergency converter (2x64) acc.

Supply and installation of 2 module, 2 fold KNX switch actuator (a) with 2 number inbuilt relays-2x10A (b) 4 numbers of freely programmable buttons on top to control lights (c) Device should be in retro fit module, to be mounted in Indian wall box along with sockets and regulators inside the frame. (d) Relays should have two independent inputs to receive power from raw or emergency sources simultaneously (e) Device should have status indication LEDs on the top to indicate status of the load connected.

Supply and installation of 8-button KNX keypad (a) Freely programmable for controlling lighting, dimming, and curtain control according to user preference. (b) The keypads should have a labelling area where custom labels can be created and printed to indicate function of each button (c) These labels should be customizable on-site and shall not tb factory made.

Supply and Installation of KNX networked occupancy/presence - ceiling mount sensors circular. (a) with detection range of 6-8m when mounted at 2.5-3mtr from floor. (b) Visible height 16 mm. With 4 channels. (c) Targeted for connection and disconnection of lights bands depending on the room brightness. (d) Regulation in response to the movement possible. (e) Detectors application with 2 power off stages. (f) Detectors application with integrated monitoring function. (g) Constant light switch with up to two independent channels. (h) Constant light switch with max. 4 outputs for brightness-dependent switching of two light bands in the area. (i) For switching on/off lights based on presence of human being, Based on LUX available in the room. (j) Sensor should have capability to manual overide and go master setting after preset time. (k) with integrated KNX bus coupler.

Supply and Installation of KNX networked occupancy/presence - ceiling mount sensors circular. (a) with detection range of 10-12m when mounted at 2.5-3mtr from floor. (b) Visible height 16 mm. With 4 channels. (c) Targeted for connection and disconnection of lights bands depending on the room brightness. (d) Regulation in response to the movement possible. (e) Detectors application with 2 power off stages. (f) Detectors application with integrated monitoring function. (g) Constant light switch with up to two independent channels. (h) Constant light switch with max. 2 outputs for dimming daylight control/rules of two rooflights in the room. (i) with integrated KNX bus coupler. (j) Sensor should have capability to manual overide and go master setting after preset time.

Supply and Installation of KNX networked Corridor occupancy/presence-Ceiling mounted . (a) rectangular coverage. (b) For mounting height of 3 m: frontal toward the detector at a max. of 20 m x 3 m (at a max. of 10 m x 3 m per side). (c) Crosswise toward the detector at a max. of 30 m x 3 m (max. of 15 m x 3m per side). (d) With integrated KNX bus coupler. (e) Mounting height 27 mm. With 4 channels. (f) for dimming/brightness of the rules to a defined value in a designated area. (g) Detector application with 2 power off stages. (h) Detector with integrated monitoring function. (i) Constant light controller with up to two independent channels. (j) Sensor should have capability to manual overide and go master setting after preset time.

Supply and installtion of surface mounting box for KNX occupancy/presence sensors

Commissioning and programming of complete lighting management system at one floor and integrating the same with the existing LMS software including GUI as required by the customer. Note: Tender LMS drawings given as a part of tender are tentative. Contractor shall submit shop drawings by indicating all LMS devices for approval of EIC-BEL before proceeding for execution.

Supply of 8mm diameter solid aluminium alloy round conductor having 50sqmm cross section area with accessories and fixing/ installation of the same on the RCC terrace roof for LPS by providing required outdoor duty terrace conductor holder at less than 01 meters interval along with all other accessories such as cross connector, expansion piece, parrallel connectors, bridging cable, folding clamp etc wherever required complete as recommended by LPS manufacturer and as per IS/IEC 62305. Pls refer LPS drawing. Note: Contractor shall obtain GA detailed drawing from OEM and submitt to EIC-BEL for approval before start of work.

Supply of 8mm diameter solid aluminium alloy round conductor having 50sqmm cross section area with required accessories and fixing/ installation of the same on the wall/ parapet for LPS by providing outdoor duty parapet/wall conductor holder at less than 01 meters interval along with all other fixing accessories complete as recommended by LPS manufacturer and as per IS/IEC 62305. Pls refer LPS drawing. Note: Contractor shall obtain GA detailed drawing from OEM and submitt to EIC-BEL for approval before start of work.

Supply and fixing of 2mtr fully Solid Vertical Air terminals on the flat terrace roof for LPS by providing all required mounitng accessories. The air terminal shall be tapered aluminium rod semi-hard (E-AlMgSiO5) suitable for high wind load . All air terminal must have Interception Tip at the Top of air terminal. System consist of Fang Fix with base and clamp on the top air terminal is erected. Air terminal Joining Clip Stainless Steel SS 304 clamp made of cable bracket, lightning tested for 100 KA 10/350 micro sec waveform.Stainless Steel Wall Clamp/16 KG stone of 365 mm diameter for high level of stability to be used for erection. No of stones/wall clamps shall be depending on wind load. Quick and easy mounting of interception rod using anchors. Concrete, frost-resistant, can be stacked. Complete items & work shall be as per LPS manufacturers recommendation and as per IS/IEC 62305 part-3. Pls refer LPS drawing.

Supplying and fixing of one mtr fully solid vertical Air terminal on RCC roof - Inclusive of aluminium interception rod of 1Mtr length(10mm dia ) , Quick mounting of the interception rod in the base using suitable technology/arrangement . Ref: Similar to OBO Type No. F-FIX JUNIOR ( 5403308 ) PLs refer LPS drawing.

Supplying of all the required materials of approved make and making of Stainless steel Earth fixing point/terminal including round contact plate, clamps, connectors, bolt&nuts etc all SS/GI as shown in drawing. Complete items & work shall be as per manufacturers recommendation and as per IS/IEC 62305 standard. Ref:Similar to OBO type No: 205DGL180V4A (5420022)

Supplying and fixing of Plastic Corrosion Protection strip: Approx 1.1 mm thick. Width 50mm. Made of petrolatum- coated chemical fibre fabric. Ref: Similar to OBO make type No.356 50 ( 2360055 )

Supplying and fixing of 50 mm X 6 mm G.I strip on surface or below earth as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm. (Earth excavation if any to be consided in separte item)

Supplying of outdoor duty insulator along with bolt-nut, screws & accessories suitable for fixing of already supplied 25x6mm or 30x3mm GI flat on the wall and fixing of the same on the wall/coloumn by providing suitable PVC/ TW guttas & screws etc as required and directed.

Supplying and drawing of 01 run of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required, with .23 AWG solid bare copper, flame retardant pvc jacket, in a box, and in compliance with ISO/IEC 11801, IEC 61156-5 standards. Make: Comscope/Panduit-Pannet/Dlink/Belden/Legrand

Supplying and fixing of following sizes of medium class 25 mm PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. Make: Universal/Supreme/Classic

Supplying and fixing of following sizes of medium class 50 mm PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. Make: Universal/Supreme/Classic

Supplying and laying of following size of HDPE pipe 63mm OD with ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II, complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 63 mm HDPE Pipe in duct/ trench as directed by engineer in charge. Make: prime/Reliance /Apollo/Rishi

Excavation for cable trenches in any kind of soil, upto required depth including dressing of sides lift upto 1.5 m, including getting out the excavated soil, refilling with good soil after laying of cable/ pipe etc in layers of 20 cm, ramming, watering, levelling and disposal of surplus excavated soil as directed, within a lead of 50 metres etc. (For HDPE pipes)

Providing, laying and fixing 50mm dia GI pipe (medium class) in ground complete with GI fittings including trenching (75mm deep) and refilliing, etc as required and directed by Engineer-in-charge.

Supplying, Installation, and labelling of dual (2) port flush type face plate with shutter suitable for Cat 6 cable termination with all necessary accessories as required. Make: Comscope/Panduit-Pannet/Dlink/Belden/Legrand

Supplying, Installation, Termination, Labelling & Testing of RJ-45 modular jacks, compliant with ISO/IEC 11801 Class E, ANSI/TIA - 568.2-D. It shall be compatible for solid 22-24 AWG diameter conductors for Data/Voice application. The RJ45 jacks shall also support power over LAN cabling as per IEEE 802.3bt Type-4 (Hi-PoE). The item shall cover all necessary accessories as required and directed by Engineer-in-charge. Make: Comscope/Panduit-Pannet/Dlink/Belden/Legrand

Supplying, Installation, Termination, Testing, Commissioning and Labelling of 24-port Patch Panel fully loaded with modular jacks, UTP Category 6, in compliance with ANSI/TIA-568-C.2 and ISO/IEC 11801 Class E transmitting standards. The patch panel shall have reliability for min. 1000 mating cycles, with metal rear cable manager to properly guide cables to point of termination and shall be supplied with Velcro straps for tying the cables. The patch panel shall have UL 94 V-0 rating and shall be complete with all necessary accessories as required. Make: Comscope/Panduit-Pannet/Dlink/Belden/Legrand

Supplying, Laying, Labelling & Testing of UTP Category 6 patch cords 2 mtrs, in compliance with TIA / EIA 568-8.2 and IEEE 802.3bt Type 4. The complete patch cord shall be LSZH - Low Smoke Zero Halogen compliant with plycarbonate RJ 45 plug. Make: Comscope/Panduit-Pannet/Dlink/Belden/Legrand

Supplying, Laying, Labelling & Testing of Armoured 24-core Single Mode Outdoor Fiber Optic Cable of Corrugated steel tape armoured and rodent protection,with gel-filled water-blocking technology, compliant with ANSI/TIA-568.E-3 an IEC 60794-1. It shall be laid in HDPE Pipe or in PVC pipes with all accessories and as directed by engineer-in-charge. Make: Comscope/Panduit-Pannet/Dlink/Belden

Supplying, Installation, Configuration and Testing of SFP Optical transceiver module suitable for 1G single mode fiber, hot plugable, with 1310nm wavelength capacity. Make : Cisco / HP / Juniper

Supplying, Installation, Configuration and Testing of SFP Optical transceiver module suitable for 10G single mode fiber, hot plugable, with 1310nm wavelength capacity. Make : Cisco / HP / Juniper

Supplying, Installation, Splicing of pigtail & Testing of 24 Port LIU single mode with Fully Loaded LC Couplers and plates ,Sliding Model, Rack mountable, mounting kit, with Single mode LC PIG Tails of 1 mtrs. Make: Comscope/Panduit-Pannet/Dlink/Belden/Legrand

Supplying and Installation of LC to LC Single Mode Fiber Patch Cable 3 mtrs. Make: Comscope/Panduit-Pannet/Dlink/Belden

Supplying and laying of 150 X 50 MM GI cable raceways with top press cover and 10 mm threading rods clamps without powder coat.

Supplying, Installation, cabling, and labelling of 42U Floor mount Network Rack 800 X 800 – with cutouts for cable entry blanked with Plastic caps. Color: Black/Gray. The rack shall be supplied and installed with the following 1) Front Perforated door 2) Rear Perforated single door 3) 230V AC fan assy Fully Wired 4) 1U PVC Horizontal Cable Manager – 06 No's 5) PVC Vertical Cable Organisers – 2 No's 6) Vertical PDU, 5/15A, Socket Strip with min 10 Sockets or more with indicators with 3 mtr power chord with 16A plug – 1 No's 7) With Required fitting accessories including Lock and Key. MAKE : APW President / RITTAL

Supplying, Installation, Configuration and Testing of managed L2 PoE Data switch for POE/Non POE deployments with 24-port 100/1000 MBPS RJ45 ports switch with Min of 2 x1Gb/10 Gb SFP/ SFP+ Interface ports, Switching Capacity of 128 GBPS (Including Switching frame + Stacking BW of 40GBPS) or higher, Forwarding packet throughput of min. 95 Mpps or higher, RAM 2GB or higher, Power supply of 370 Watts or higher ,stacking BW 40 GBPS or higher including stacking cable and connector or DAC , Including Power supply, fan, IPV6 certified logo,EAL or NDPP Certified.The item shall be supplied with OEM warranty of 1 year and service contracts for 1 year and OEM Authorization for the intended application and configuration. Make : Cisco / HP / Juniper

Supplying, Installation, Configuration and Testing of managed L2 Data switch with 24-port 100/1000 MBPS RJ45 ports switch with Min of 2 x1Gb/10 Gb SFP/ SFP+ Interface ports, Switching Capacity of 128 GBPS (Including Switching frame + Stacking BW of 40GBPS) or higher, Forwarding packet throughput of min. 95 Mpps or higher, RAM 2GB or higher, stacking BW 40 GBPS or higher including stacking cable and connector or DAC , Including Power supply, fan, IPV6 certified logo,EAL or NDPP Certified.The item shall be supplied with OEM warranty of 1 year and service contracts for 1 year and OEM Authorization for the intended application and configuration. Make : Cisco / HP / Juniper

Supply, Installation, Testing, Commissioning of Biometric, PIN-based and smart card reader, single gang wall mount with keypad form. The reader shall have encrypted communication between credential and reader for smart and mobile credentials, that supports secure identity object on various form factors with interoperable capability with a growing range of technologies. Make: HID/Honeywell/Bosch

Supply Installation Testing & Commissioning of Intelligent 4 Reader, TCP IP Controller with proper housing. The controller shall have an on-board buffer memory of up to 50,000 transaction. It shall also have on board support for the storage of biometric templates. The controller should be intelligent to take decision in offline mode when communication link is not available On-board. The controller shall have an on-boartd Ethernet port. Above controller box fitted with all allied devices with termination link shall be housed in Power Coated CRCA enclosure of IP-54 rating, made out of 2 MM thick CRCA Sheet with lock arrangement, including UL listed power supply, all necessary accessories, civil, electrical works & peripheral items, as required. Make: HID/Honeywell/Bosch

Supply, Installation, Testing and commissioning of EM LOCK (double door) with door contacts for access doors, complete with all fixing accessories as required at site and as directed by Engineer-in-charge

Supply, Installation, Testing and Commissioning of EXIT SWITCH for the identified access control doors from the inside of the premises.

Supply, configuration, testing & commissioning of Licensed Access Control System Enterprise software to support minimum of 100 readers, system adminitration,Alarm Monitoring, Active Directory, Login Driver, Unlimited Clients, Unlimited User logins. Should be installed and made operational in Workstation PC (Refer to BoQ item in this order)

Supply, configuration, testing & commissioning of Workstation PC with Linux embedded OS or latest Windows OS, as directed by Engineer-in-charge, antivirus softwares, Wireless Keyboard,& Mouse, Hdmi cables and associated accessories, complete and as directed by engineer-in-charge. Intel i7, 8 core, 16GB RAM, 1TB HDD, 24" LED FHD display Make : HP / DELL / LENOVO

Integration of new ACS system with existing ACS system, including laying of additional LAN cables and configuration in VMS

Supply and configuration of Access Control Smart Cards compatible with the readers and the complete access control system provisioned in the work

Supply, drawing and termination of 4 Core, 0.75 Sqmm, PVC Insulated, PVC sheathed ATC conductor multistranded, Unarmored shielded cable for signal (Reader/Exit Switch to Controller, Controller to EM lock).

Supply, Installation, Testing and Commissioning of Indoor Colour IP IR Dome Camera 1/2.8”CMOS progressive scan Resolution: 2 MP or better focal length: motorized 2.7~13.5 mm @F1.4 IR distance: upto 65m Noise reduction: 2D/3D DNR Video compression: H.265 or better Built in video analytics: region entrance, region exiting, advanced motion detection, tamper detection, line crossing, object left Event trigger: motion detection, network disconnection, external input, audio alarm, etc. IK10 impact protection SNR: 50-60 db ONVIF complaiance: ONVIF Profile G & Q & S & T, API BIS certification Make: Bosch, Honeywell, Siemens, Pelco

Supply, Installation, Testing and Commissioning of 64-Channel embedded 4K NVR, minimum 48 TB along with inbuilt hard disks minimum RAID 1 configuration (total capacity 48 TB), General playback, event playback, tag playback, split playback, picture playback ANR, N+1 redundancy High decoding capability for Ultra 4K HD viewing and recording Upto 12 MP (4K) resiolution live view, preview and playback Internal storage: minimum 48 TB storage ( vendor shall supply compatible hard disks with NVR) - minimum RAID 1 configuration IP video input: 32 channels HD, Linux Embedded or equivalent Operating systems Required RAID 1/5/6/10 Recording type: Continuous and Event (motion detection, alarm, VCA, smart analysis) Min 3 no.s USB Alarm in: 16 channel Alarm out: 4 channel IPC: Third party ONVIF IP camera supported BIS certified

Central Video Management Software for CCTV management, which includes, but not limited to: • Motion Detection: Set up motion detection zones and schedules to receive alerts for unusual activity. • Video Analytics (AI): Utilize AI for features like facial recognition, object tracking, and anomaly detection. • Integration: Connect with other security systems, such as access control and smart locks, for a comprehensive security network. send alarms and notifications in case of suspicious activity, automating the process and eliminating human errors. • Enhanced perimeter security • Redundancy and failover features • Incident Management • Zone-specific Monitoring • Tamper Detection • Integration with Smart Management Systems And similar latest features for industrial and defense surveilance applications. Should be installed and made operational in Workstation PC (Refer to BoQ item in this order) The bidder shall be responsible for integrating all the existing CCTV cameras in the new server and also installation of VMS software. Bidder can visit at location to get clarity of existing CCTV cameras.

Supply, installation, testing and commissioning of 55" 4K Ultra HD Smart TV, 24/7 operation, matching the specs of Samsung UA55BU8570ULXL or equivalent, to be compatible for CCTV viewing and playback.

PART-D FURNITURE WORKS

Supplying and erection of modular work counter table tops of varying lengths of minimum 570/450/900 mm wide at 750/450 mm high as per furniture layout indicated in the drawing.The table top of the work counter shall be 25 mm thick mdf board provided with 0.7 mm post lamination on top and 0.5mm balancing lamination at bottom and supported from the partitions with powder coated MS brackets and shall consist of approved make powder coated moulded sliding key board tray with provision for mouse pad for every 1500 mm length of work counters and shall have post formed edges on front side and all exposed edges shall be finished with edge binding tape of matching shade. (Note: Rates quoted shall be for the complete finished work including all components mentioned above and fixing in position. Actual area of table tops in plan will be measured for payment. Modular partitions from which table tops of work stations are supported are measured separately.)

Supplying and erection of gable ends of 570 mm wide for Executive work stations at 750 mm high as per furniture layout indicated on drawing. Verticle support and gable end shall be 25 mm thick MDF board provided with 0.7 mm post lamination on both sides. The verticle support of work counters shall have post formed edges on front side and all exposed edges shall be finished with edge binding tape of matching shade. (Note: Rates quoted shall be for the complete finished work including all components mentioned above and fixing in position. Actual area of verticle support as seen in elevation will be measured for payment.)

Supplying storage pedestal unit of approximate size 630 x 455 x 560 mm, consisting of four number of drawers including one pencil tray and supported on casters. The storage unit shall be made out of 18 mm thick mdf board with 0.55mm thick post lamination on all exterior surfaces and 0.5mm thick balancing lamination on all interior surfaces and drawers. The drawers shall be made out of Ebco make or equivalent (meta box) full panel drawer unit sliding arrangement of height 86mm, 86mm & 250mm. Ebco/Hetich make SS handles and locking arrangements. The front side of top panel

Supplying and fixing sliding door units of size 570 mm wide and 750/700 mm height having one horizontal shelf & of varying length as required & made out of 18mm thick mdf board for all exterior & interior, horizontal/vertical panels. with the exposed surfaces shall be provided with 0.55 mm (min) thick post lamination & internal surfaces with 0.5 mm thick balancing lamination. Each sliding door unit shall be of 1200 mm width (appx.) having two sliding shutters of width 600 mm each (appx.) & shutters shall be made out of 18 mm thick laminated mdf board having standard sliding arrangements,handle and locking facilities. The front side top panel of sliding door unit shall have post formed edges and other three side shall have pvc lipping as required. (Note: Rate to be quoted shall be for the complete finished work including all materials & labour. Area of sliding door unit as seen in elevation shall be measured for payment). Ebco/Hetich make SS handles and locking arrangements

Supplying and fixing sliding door units of size 570 mm wide and 1200 mm height having two horizontal shelf & of varying length as required & made out of 18mm thick mdf board for all exterior & interior, horizontal/vertical panels. with the exposed surfaces shall be provided with 0.55 mm (min) thick post lamination & internal surfaces with 0.5 mm thick balancing lamination. Each sliding door unit shall be of 1200 mm width (appx.) having two sliding shutters of width 600 mm each (appx.) & shutters shall be made out of 18 mm thick laminated mdf board having standard sliding arrangements,handle and locking facilities. The front side top panel of sliding door unit shall have post formed edges and other three side shall have pvc lipping as required. (Note: Rate to be quoted shall be for the complete finished work including all materials & labour. Area of sliding door unit as seen in elevation shall be measured for payment). Ebco/Hetich make SS handles and locking arrangements

Supplying and erection of 1200/1800 mm (appx.) high self supporting modular tile based partitions as per layout indicated on drawing .The frame work of the partitions shall be made out of MS(CRCA)/ aluminium extruded, section of standard guage and with approved powder coated finish and shall have a minimum width of 62 mm measured outer- to- outer of double walled MDF panels. The vertical frames of the partitions shall be spaced at 600 mm to 750 mm intervals as per requirement and all exposed surfaces of partitions shall be provided with aluminium/MS(CRCA) trim plates. Provisions shall be made in the horizontal (2 slots) and vertical (4 slots) frame work for taking electrical and communication cables / wires and for supporting table tops of work stations wherever required. The double walled panels of the partitions below and above table top shall be made out of exterior grade mdf board of minimum thickness of 8 mm with min 0.55 mm post lamination on front surface and 0.5 mm thick balancing lamination on backside, the exposed edges shall be finished with edge binding tape of approved colour and shade (overall thickness shall not be less than 0.5 mm). MS(CRCA)/ aluminium extruded. Raceways including MS(CRCA) / aluminium extruded cover plate of standard gauge shall be provided though out at skirting level and also for a length of 900 mm above and below table top level at the specified location as approved by Engineer-in-charge. Thickness of partition shall accommodate for housing MS switch boxes of 50 mm thickness inside the partition. Necessary arrangements shall be provided in the raceways for fixing switches, sockets and communication accessories as required. Provision shall be made in the frame work of partitions for facilitating extension in both horizontal and verticle directions 0.8mm thick mdf board in modular partition sahll be provided with suitable and approved fabric for pinup board in one panel of minimum size 600x450 mm and provided with suitable lamination for marker board of size 600x450 mm on the inner surface of every AGM TABLE, DGM/SR.DGM TABLE, PA TABLE, MANAGER/DY.MANAGER WORKSTATION AND EXECUTIVE WORK STATION. Each AGM TABLE,DGM/SR.DGM TABLE, PA TABLE, MANAGER/DY. MANAGER WORK STATION AND EXECUTIVE WORK STATION shall be provided and fixed with the one no 600mm long powder coated MS/Alu accessory rail for each work station. Each work station shall be provided with the name plate made out of powder coated MS Sheet with the sliding arrangement in accesory rail with the provision to insert printed name plate with lock guides above top level. One number powder MS CPU trolley of 1.5mm (min) thickness with the four castors rested on floor and also mounted on modular partition below table top level of matching shade and approved design for each work station/table and counters (Note: Rate to be quoted shall be for the complete finished work including all materials and fixing,excluding table tops,switches and sockets. Area of partition as seen in elevation will be measured for payment.)Cutout details for electrical switch boards.data & telephone jacks shall be provided at site and cutouts to be done at site.

Supplying and erecting AGM tables having semi-circular edge on one side supported on MS Circular leg having powder coated finish and the other square edge supported on MS (CRCA)/aluminium extruded frame work of partitions. The table top shall be of 25 mm thick mdf board provided with 0.7 mm thick post lamination on top and 0.5 mm thick balancing lamination at the bottom with post formed edges. The table shall be provided with the leg board made out of 18 mm thick mdf board laminated with matching shade laminate of the table top of 0.7 mm thk and all exposed edges to be finished with edge binding tape of matching shade and design provided on longitudinal direction which will also form a support to the table top.The front table shall be of size 2100 x900 mm and at 750 mm high with a return table of size 1200 x 570 x 750 mm.The table top shall be made out of 25mm thick mdf board provided with 0.7mm thick post lamination on top and 0.5mm thick balancing lamination at the bottom with post formed edges.The table shall be provided with approved make powder coated moulded sliding key board tray with provision for mouse pad. One pannel each of size 600 x 450 mm for pinup board and for marker board shall be provided in partitions of executive tables.(Note: The rate to be quoted shall for the complete finish work including side table, ms brackets etc., but excluding modular partitions.)

Supplying and erecting SR.DGM/DGM tables having semi-circular edge on one side supported on MS Circular leg having powder coated finish and the other square edge supported on MS (CRCA)/aluminium extruded frame work of partitions. The table top shall be of 25 mm thick mdf board provided with 0.7 mm thick post lamination on top and 0.5 mm thick balancing lamination at the bottom with post formed edges. The table shall be provided with the leg board made out of 18 mm thick mdf board laminated with matching shade laminate of the table top of 0.7 mm thk and all exposed edges to be finished with edge binding tape of matching shade and design provided on longitudinal direction which will also form a support to the table top.The front table shall be of size 1800 x750 mm and at 750 mm high with a return table of size 1200 x 570 x 750 mm.The table top shall be made out of 25mm thick mdf board provided with 0.7mm thick post lamination on top and 0.5mm thick balancing lamination at the bottom with post formed edges.The table shall be provided with approved make powder coated moulded sliding key board tray with provision for mouse pad. One pannel each of size 600 x 450 mm for pinup board and for marker board shall be provided in partitions of executive tables.(Note: The rate to be quoted shall for the complete finish work including side table, ms brackets etc., but excluding modular partitions.)

Supplying and erection of modular work station table tops for Manager's/Dy.Manager's of over all size 2100x1500x570 mm as per layout indicated on drawing.The table top of the work stations shall be 25mm thick MDF board provided with 0.7mm thick post lamination on top and 0.5mm thick balancing lamination on the bottom with post formed edges supported from the partitions with MS brackets.The front table shall be provided with leg board made out of 18mm thk mdf board laminated with matching shade laminate of the table top of 0.7mm thk and the exposed edges to be finished with edge binding tape of matching shade and design provided on longitudinal direction which will also form a support to the table top.Workstations shall also be provided with a front table of size 1500 x 600 x 25 mm thick MDF board provided with 0.7mm thick post lamination on top and 0.5mm thick balancing lamination on the bottom with post formed edges. Table top having semicircular edge on one side shall be supported on single leg having powder coated finish & other edge connected to the table top of the workstation. The table shall be provided with approved make powder coated moulded sliding key board tray with provision for mouse pad. One pannel each of size 600 x 450 mm for pinup board and for marker board shall be provided in partitions of Scientist work station. (Note: The rate to be quoted shall for the complete finish work including side table, ms brackets etc., but excluding modular partitions.)

Supplying and erecting PA tables having semi-circular edge on one side supported on MS Circular leg having powder coated finish and the other square edge supported on MS (CRCA)/aluminium extruded frame work of partitions. The table top shall be of 25 mm thick mdf board provided with 0.7mm thick post lamination on top and 0.5mm thick balancing lamination at the bottom with post formed edges. The table shall be provided with the leg board made out of 18 mm thick mdf board laminated with matching shade laminate of the table top of 0.7 mm thk and all exposed edges to be finished with edge binding tape of matching shade and design provided on longitudinal direction which will also form a support to the table top.The front table shall be of size 1500 x600 mm and at 750 mm high with a return table of size 1200 x 570 x 750 mm.The table top shall be made out of 25mm thick mdf board provided with 0.7mm thick post lamination on top and 0.5mm thick balancing lamination at the bottom with post formed edges.The table shall be provided with approved make powder coated moulded sliding key board tray with provision for mouse pad. One pannel each of size 600 x 450 mm for pinup board and for marker board shall be provided in partitions of executive tables.(Note: The rate to be quoted shall for the complete finish work including side table, ms brackets etc., but excluding modular partitions.)

Supplying and erection of modular work station table tops for Engineers of size 1500X1500mm (consisting of one pentagon of 900x900 mm and table top of size 600x570 mm -1 No + 900x570mm -1No ) as per layout indicated on drawing No.98100 972439. The table top of the work stations shall be 25mm thick MDF board 570mm wide provided with 0.7mm thick post lamination on top and 0.5mm thick balancing lamination on the bottom with post formed edges & supported from the partitions with MS brackets. All exposed surface of mdf board to be finished with the matching shade. The table shall be provided with approved make powder coated moulded sliding key board tray with provision for mouse pad. One panel each of size 600mm x450mm for pinup board and for marker board shall be provided in partition of Executive workstation (Note: The frame work of partitions from which table tops of work stations are supported are measured separately. Rates quoted shall before the complete finished work including all components mentioned above and fixing in position.Gable ends are to be measured seperately for payment)