Augmentation of existing pu...

Providing 8” Bend (MS Fabricated) – Heavy Duty used for changing the direction of an 8” MS pipeline during installation complete in all respect

Providing 8” Flange (MS) used for joining 8-inch MS pipes securely with nuts, bolts and gasket complete in all respect

Providing 95 Sq.mm 4 Core Armoured Aluminum Cable–Havell’s Make Heavy Duty power cable suitable for high–load electrical connections, including thimble and panel fitting complete in all respect

Providing and Installation of Changeover Switch Make HPL Used for safe changeover between main power supply and alternate power source.

Welding and fitting charges (including material): Includes welding work, MS fabrication, fixing, alignment, and complete installation for MS flange, pipe, and bends.

Loading and Unloading by Hydra (All 3 Motors and pipe) Includes fixing, dismantling, and labour charges.

Providing 6” x 8” MS (Mild Steel) Reducers for pipeline fitting complete in all respect.

Providing 8”, 5mm MS Pipe - Jindal make or equivalent Brand Used with sewage submersible pump for dirty wastewater discharge and safe contaminated water disposal.

Providing Nuts and bolts used for tightening and securing flanges, pipe joints, and sewage submersible pump fittings. Ensures firm alignment, leak-free joints, and vibration resistance.

Supply and installation of Non-Clog Sewage Submersible Pump Set of capacity 12500 LPM (750 cum/hr) @ 12 Mtr. head (60 HP) with the following Technical Specifications: - Make / Brand: JASCO, Kirloskar, Darling Pumps or equivalent brand Pump Series: Non-Clog Sewage Application: Municipal sewage, drainage, effluent, and wastewater handling Pump Type: Vertical, submersible, non-clog design Rated Discharge Capacity: 12,500 LPM (12.50 m/min) Rated Head: 12 Meters, Pump Efficiency at Duty Point: 78%, Solid Handling Capacity: 100 mm, Impeller Type: Semi-Open, Non-Clog, Delivery Nozzle Size: 250 mm, Pump Casing Material: Cl FG-260 (Cast Iron), Wear Plate / Suction Bell Material: CI FG-260, Pump Shaft Material: SS-410 (Stainless Steel), Impeller Material: CF-8M (Stainless Steel), Bearing Type: Grease-lubricated, sealed ball bearings, Motor and Electrical Specifications, Motor Type: TEWD (Totally Enclosed Wash-Down) Submersible Motor, Motor Power Rating: 60 HP / 45.0 kW, Operating Voltage: 415 Volts, 50 Hz, 3-Phase AC, Supply Motor Speed: 1450 RPM, Motor Insulation Class: F-Class, Motor Efficiency: 92.20%, Overall Pump-Motor Efficiency: 71.92%, Cable and Control System, Power Cable: 2R × 3.5C × 25.0 sq.mm, stranded copper flexible, PVC insulated Control Cable: 1R × 4C × 2.5, sq.mm, copper conductor, PVC insulated Cable, Suitability: Rated for continuous submersible motor load and control signaling, Protection and Sealing System Winding Temperature Sensor: Provided, Bearing Temperature Sensor (DE and NDE): Provided Water Leakage Sensor (Cable Chamber): Provided Water Leakage Sensor (Motor Body): Provided, Primary Seal Leakage Moisture Sensor: Provided, Mechanical Seal Type: Primary Cl plus TC, Secondary, TC plus Ceramic, Seal Material: Tungsten Carbide (TC) plus Ceramic for high-pressure submerged sealing Ingress Protection: Dual mechanical seal arrangement to prevent water entry and motor contamination, Installation Accessories (Supplied with Pump Set), Skid / Base Frame: MS fabricated heavy-duty pump, mounting frame Guide Pipe: 10 Meters, MS Galvanized Lifting Chain: 10 Meters, MS Galvanized, Fasteners: Stainless steel corrosion-resistant grade, Motor Cooling: Air-filled submersible design for efficient heat dissipation, Liquid Handling Parameters Pumped Liquid: Sewage / Wastewater, pH Compatibility: 6 - 8 (Suitable for municipal wastewater) Operating Temperature: Ambient submerged conditions.