AGE I P N 17 OF 2020-21 PROVN OF CONSTR OF TWO WASHROOMS ALONGWITH EXTERNAL SERVICES AT COMMUNITY CENTRE IN NIWARU JAIPUR MIL STAITON

Amount

Excavation in trenches n.exc. 1.50m deep and n.exe 1.50 in wide for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil, complete all as specified and as directed by Engr-in-Charge.

PCC type D-2 (1:4:8), using 40 mm graded stone aggregates as in foundation filling & mass concrete, complete all as specified and directed by Engineer-in-Charge.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and as directed by Engr-in-Charge.

Earth filling under floors including spreading, levelling, watering and well ramming in layers not exc 25 cm thick. Note :- Soil obtained from excavation under item 1 here-in-before shall be used for filling.

Removing excavated material n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point, complete all as specified and as directed by Engr-in-Charge.

Brick work with subclass ‘B’ old size burnt bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge..

M&L for 40-45mm thick machine cut Kota stone slab for DPC and including laying of 20 mm thick screed bed or bedding layer in CM 1:6 , complete all as specified and directed by Engineer-

M&L for rendering 15mm thick in cement mortar 1:4 on stone masonry surfaces or surface other than fair face of brick work of walls, finished fair & even, complete all as specified and as directed by Engr-in-Charge.

M&L rendering 10 mm thick in CM(1:6) on brick walls or concrete surface, surface finished even and smooth without using extra cement, complete all as specified and as directed by Engr-in-Charge.

M&L for Brick work with subclass ‘B’ old size burnt bricks, straight or curved on plan to any radius in half brick thick walls in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

Glazed ceramic coloured tiles 450 mm x 350 mm x 7to8mm thick on vertical surfaces such as skirting /dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces as backing coat, complete all as specified and directed by Engineer-in-Charge.

Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 , complete all as specified and directed by Engineer-in-Charge.

M&L Reinforced cement concrete(design mix) M-25( using 20mm graded crushed stone aggregate) as in slab supported on walls, beams and columns in floors, roofs, shelves and the like, complete all as specified and as directed by Engr-in-Charge. Note :- Reinforcement & formwork shall be measured and paid for separately.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete., complete all as specified and as directed by Engr-in-Charge.

M&L for formwork to edges of concrete flats, roofs, floors etc not exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide for fair finished surfaces. , complete all as specified and as directed by Engr-in-Charge.

S&F deformed or twisted MS bar 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire ( annealed) not less than 0.9 mm dia, complete all as specified and directed by Engineer-in-Charge.

M & L for 30 mm (average thickness) PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate in floors and surfaces finished fair and even, complete all as specified and as directed by Engr-in-Charge.

M & L for 20mm thick Granite (of any type) machine cut in urinal partition and WHB Counter and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing , complete all as specified and as directed by Engr-in-Charge.

M & L CP Cast copper alloy angle valve two way with wall flang and areator fancy type of 15 mm bore quarter turn, complete all as specified and as directed by Engr-in-Charge.

S & F PVC Connection 15 mm bore with 2 No PTMT Nuts 45 cm long fixed with one end to pillar tap and other end to stop cock or iron pipe , complete all as specified and as directed by Engr-in-Charge.

M & L CP Fancy type center hole basin mixer 15 mm bore cast copper alloy with 450mm copper hose/braided hose without popup waste system quarter turn, complete all as specified and as directed by Engr-in-Charge.

M & L Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms), complete all as specified and as directed by Engr-in-Charge.

M & L Chromium plated angle stop cock with wall flange fancy type cast copper alloy 15 mm bore any coloour , complete all as specified and as directed by Engr-in-Charge.

S & F vitrious china wash down water closet pan (pedastal pettern) white including connection to drain (Or outgoing pipe) and to flushing pipe anti syphonage pipe etc & With plastic WC seat cover white closed pattern with flat bottom and twin flush fitting and cover and mild steel chromium plated or aluminised hinging device complete excluding Cistern , complete all as specified and as directed by Engr-in-Charge.

S & F CP Bottle trap with internal partition 32 mm size with 300 mm x190 mm long wall connection pip and wall flange for WHB, complete all as specified and as directed by Engr-in-Charge.

S & F Stop valve 15mm, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and fixed , complete all as specified and as directed by Engr-in-Charge.

S & F Stop valve 20mm, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and fixed , complete all as specified and as directed by Engr-in-Charge.

S & F of CP Pressure jet for EWC including flexible pipe for 15 mm dia bore , complete all as specified and as directed by Engr-in-Charge.

S & F CP Health faucket for EWC including chain and lever, complete all as specified and as directed by Engr-in-Charge.

M & L For PVC Nahani/floor trap and square in size of 100x100 mm including MS Chromium plated grating 125mm dia of weight not less than 50 gm for floor trap / Nahani trap , complete all as specified and as directed by Engr-in-Charge.

Steel tubes 15 mm bore, ‘medium grade’, galvanized with all fittings and fixed to walls and ceilings or laid in floors,and cutting chessing in wall and making good, complete all as specified and directed by Engineer-in-Charge.

Steel tubes 20 mm bore, ‘medium grade’, galvanized with all fittings and fixed to walls and ceilings or laid in floors and cutting chessing in wall and making good, complete all as specified and directed by Engineer-in- Charge.

S & F Rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) tripple layer white in colour hoisted and fixed in position all as specified in SSR Part-I 500 ltr cap, complete all as specified and directed by Engineer-in-Charge.

S&F Brass Ball valves 15 mm bore high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed , complete all as specified and directed by Engineer-in-Charge.

S & F PVC (SWR) Pipe 75mm bore single soketed in any length with rubber ring joints lid in trenches or in floors, complete all as specified and directed by Engineer-in-Charge.

S & F PVC (SWR) Pipe 110 mm bore single soketed in any length with rubber ring joints lid in trenches or in floors, complete all as specified and directed by Engineer-in-Charge.

S & F PVC (SWR) Bends any radius 75mm dia, complete all as specified and directed by Engineer-in-Charge.

S & F PVC (SWR) Bends any radius 110 mm dia, complete all as specified and directed by Engineer-in-Charge.

S & F PVC (SWR) junction single (Single T) equal or unequal 75mm dia, complete all as specified and directed by Engineer-in-Charge.

S & F PVC (SWR) junction single (Single T) equal or unequal 110 mm dia, complete all as specified and directed by Engineer-in-Charge.

S & F PVC (SWR) Vent cowl 110 mm dia, complete all as specified and directed by Engineer-in-Charge.

S & F Toilet paper holder of Vitreous china fixed to walls with chromium plated (CP) brass screws , complete all as specified and directed by Engineer-in-Charge.

S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper of approved shade/tint over a coat of primer on wall & ceilling, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint of approved shade on walls all as specified & directed by Engineer-in-Charge

S & F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification., complete all as specified and directed by Engineer-in-Charge.

S & F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & directed by engineer in charge

S & F Aluminium anodised barrel tower bolt 150 mm long of extruded section , complete all as specified and directed by Engineer-in-Charge.

S & F Aluminium handle 150mm size cast type anodised ISI, complete all as specified and directed by Engineer-in-Charge.

S & F 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed to angle iron chowkhat including welding, complete all as specified and directed by Engineer-in-Charge.

M & L aluminium powder coated frame for doors windows ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed by Engineer-in-Charge.

M & L powder coated window and ventilator shutters fixed type without sash bars aluminium sections weighing 0.55 Kg/M including necessary joining cleats glazing clips rubber packing anodised aluminium snap beading secrews , complete all as specified and directed by Engineer-in-Charge.

S & F 4mm figured glass pin head type andglazing with oil putty in squares n exceeding 0.5 Sqm in each pane, complete all as specified and directed by Engineer-in-Charge.

M & L for surface preperation by removal of all loose particle to ensure clean smooth and dry surface and laying 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) finished even and smooth without using extra cement to cover negetive slope into prop with WPC @ 3% by weight of cement, complete all as specified and directed by Engineer-in-Charge.

The surface shall be painted with one coat of polymeric primer @0.30 Kg per Sqm, conforming to IS : 3384. A layer of APP based polymeric membrane 3mm thick (min), weighing not less than 3.5 Kg/m2 reinforced with polyster non woven fabric (weighing not less than 150 gm/Sqm). Application of polymeric membrane shall be by torch application all as per manufacturer instructions. and finally applying one coat of bitumen @ 1.2 Kg/Sqm on APP membrane before application of aluminium paint., complete all as specified and directed by Engineer-in-Charge.

M & L one coat of aluminium paint over APP Membrane all as specified and directed by engineer in charge

S & F aluminium anodised tubular tower rail 20mm dia D Type 60mm long between flanges, complete all as specified and directed by Engineer-in-Charge.

S & F fancy type 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed by Engineer-in-Charge.

S & F vitrious china wash hand basin of size 550X400 mm flat back excluding taps waste chain and plug but including brackets, cutting for pinning in ends of brackets or erecting stand , complete all as specified and directed by Engineer-in-Charge.

S & F Waste fittings 32 mm bore brass cp or glazed ware sinks basin etc with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed , complete all as specified and directed by Engineer-in-Charge.

S & F soap dish brass CP, complete all as specified and directed by Engineer-in-Charge.

M & L PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement, complete all as specified and directed by Engineer-in-Charge.

S & F Vitreous China urinals, bowl type flat back size of 465x355x265 mm white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipee. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) , complete all as specified and directed by Engineer-in-Charge.

M & L soakage well excavation in any type of soil foundation in PCC 1:3:6 wall of honey comb masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonry in CM RCC Cover slab in M25 cover intercennecting pipes of RCC complete filled with brick bats of size 3 m dia and 6 m effective depth,All as per Drg no- CEJZ/2004/TD/S-35 dt 11-05-04 complete all as specified and directed by Engineer-in-Charge.

M & L for precast RCC 1:2:4 type B1 using 20mm graded aggregates for manhole cover including placing and set in CM 1:6 all as specified including demolition of old RCC Manhole cover Note: Reinforcement shall be measured paid for saperately, complete all as specified and directed by Engineer-in-Charge.

M & L for Cement concrete 1:2:4 type B1 using 20mm graded stone aggregates in surface channels and drains and benching including finishing the top of benching even and smooth using extra cement Note: forming fair finished channel for drain using extra cement will be measured and paid for saperately, complete all as specified and directed by Engineer-in-Charge.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms moulds mitred/stopped ends etc, complete all as specified and directed by Engineer-in-Charge.

M & L for PCC 1:4:8 type D2 using 40mm graded stone aggregates in bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; complete for 150mm bore pipe all as specified and directed by engineer in charge

M & L Slat-glazed stoneware drain pipes of 150mm bore grade A ISI marked laid to slope in trenches and jointed in CM 1:1 and tested, complete all as specified and directed by Engineer-in-Charge.

M & L for 75 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in subbase to floor finished fair and even all as specified and directed by engineer in charge

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 Sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 SQmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 25 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and unwelded sunken galvanized pressed steel terminal boxes covered with 3mm thick hylam/phenolic laminate while sheet cover for mounting switches, sockets, fan regulators as required for the following : - (a) One light / fan controlled by one switch.

(b) All as per srl item no- 72 Above but for One socket outlet 6 amp controlled by one switch on the same board with other switches.

S&F switch plano flush button type 230 / 250 V grade on top covers single pole one way 6 amp , complete all as specified and directed by Engineer-in-Charge.

S& F socket outlet 2 in 1, 2, & 3 pin, 6 amp, flush type multipurpose use flush mounting type 230 / 250 Volts grade (ISI Marked) on top covers, complete all as specified and directed by Engineer-in-Charge.

S& F Celling rose 3 plates polycarbonate body complete., complete all as specified and directed by Engineer-in-Charge.

Supply and fixing wall mounting Decorative ultra slim square/round profile LED Light fittings with extruded polycarbonate, 20W, 4 fit long complete with all accessories pre- wireed twin core twisted flexible copper conductor cable with suitable size, complete all as specified and directed by Engineer-in-Charge. Make : Havells Cat Part No. LHEXACP7IN1W020 or equvalent of make Crompton, Wipro, Phillips, Syska etc.

All as per item No 77 above but LED Light fittings with extruded polycarbonate, 10W, 2 fit long , complete all as specified and directed by Engineer-in-Charge. Make : Havells Cat Part No. LHEXACP7IN1W010 or equvalent of make Crompton, Wipro, Phillips, Syska etc.

Supply and fixing LED Bldg securty light fittings 25 Watt with all accessories incl bracket , nut & bolts etc. fixed to wall pre- wired twin core twisted flexible copper conductor cable with suitable size, complete all as specified and directed by Engineer-in-Charge. Make : Syska Cat Part No. LR02-291-XXX-57-XX or equvalent of make Crompton, Wipro, Phillips, Havells etc.

S&F exhaust fan single phase AC 230 volts, 300mm sweep complete with all accessories pre - wired twin core twisted flexible copper conductor cable with suitable louvers, complete all as specified and directed by Engineer-in-Charge. Make : Standard Cat Part No. Double ball refresh air - DBB or equivalent of make Bajaj, Crompton, Polycab,Usha, Khaitan etc.

Earthing complete with galvanised steel earth plate electrode 600mmx600mmxthickness not less than 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron/steel all as shown in electric plate No 3 connected to earth test point/MCB DBs all as specified and indicated compete with funnel, charcoal, dust, salt etc and GI protection pipe, medium grade 15mm bore and GI watering pipe 20mm bore light grade, 40mm thick precast RCC M-15 (nomial mix) cover reinforced with XPM weight not less than 4 Kg/Sqm with suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover, PCC M-15 (Nominal mix) pit, excavation and earth work in any type of soil and connected all as specified .Note:-soil used for filling should be free from stones.

Supply, laying, jointing and testing of 06 Sqmm, 2 core, LT underground cables, 1100 volts grade, XLPE insulated and PVC sheathed, heavy duty armoured, with multistandred aluminium conductors, IS-7098 (marked, laid in trenches/ducts/fixed on poles/walls/laid under roads/path/drain/culverts or encased in GI pipe complete all as specified and directed.

Supply and fixing factory made , sheet steel distribution boards SPN, 4 way, double door type protection class IP-43 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 200 Amp rating copper bus bar and including MCB as per the followings :- (i) MCB, SPN, 240 Volts of capacity 6 Amps 10 KA - 01 Nos (ii) MCB, SP, 240 Volts of capacity 6 Amps 10 KA - 02 Nos

M&L for sand cushioning to under ground cable screened washed river sand and punning for cushioning to cable all as directed.

M&L for brick with sub class 'B' laid flat and dry aboutting each other with gap between adjacent bricks not exc. 10mm, over UG cable for protection.

M&L for GI tubing, light grade 40mm dia including fittings such as socket and bend for protection of under ground cable on poles/walls/under road crossing etc complete all as diected.

Supply and laying in trenches jointing and testing galvanised steel water tubing medium grade including all necessary pipe fittings/accessories like sockets, union, tees, elbows etc of sizes 25 mm bore laid in trench , complete all as specified and directed by Engineer-in-Charge.

Supply and laying in trenches jointing and testing galvanised steel water tubing medium grade including all necessary pipe fittings/accessories like sockets, union, tees, elbows etc of sizes 20 mm bore laid in trench, complete all as specified and directed by Engineer-in-Charge.

Supplied and fixed Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed bore dia at pipe 25 mm , complete all as specified and directed by Engineer-in-Charge.

Supplied and fixed Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed bore dia at pipe 20 mm , complete all as specified and directed by Engineer-in-Charge.

M&L for construction of brick masonry valve pit all as specified and as shown on drawing including excavation and earth work in any type of soil plasterning, PCC in foundation, MS Sheet cover 3 mm thick with 40mm angle iron frame with locking arrangement painted with two coats of bituminous paint over a one coat of primer etc. complete of internal dimention size 600mm x 600mm x 900 mm, complete all as specified and directed by Engineer-in-Charge.

M&L for cutting, welding, taping etc. of existing GI water supply distribution line bore of pipe upto 80 mm in position for insertion of new tee & necessary fittings

M/S JALANDRA CONSTRUCTIONS

m/s nemichand contractor

Shiv Construction Company

J.J.ENGINEERING