Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.2 LAccepted-AOC VILL PO KOTA VIA PANAGARH BAZAR DIST BURDWAN WB PIN 713148 | BURDWAN | BURDWAN | WEST BENGAL | 713148 | L1 | Accepted-AOC Lowest rate quoted | |
| 2 | L2₹39.3 L+₹31,841 (0.82%)Rejected-Finance | L2 | Rejected-Finance Higher rate quoted than L1 | |
| 3 | L3₹39.4 L+₹47,083 (1.21%)Rejected-Finance | L3 | Rejected-Finance Higher rate quoted than L1 | |
| 4 | L4₹39.8 L+₹80,940 (2.08%)Rejected-Finance | L4 | Rejected-Finance Higher rate quoted than L1 | |
| 5 | L5₹41.1 L+₹2.1 L (5.47%)Rejected-Finance | L5 | Rejected-Finance Higher rate quoted than L1 |
Tender Value
₹47.8 L
EMD Value
₹95,500
Closing Date
27 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
All as per BOQ
2022_MES_546979_1
8400-850/E8
Open Tender
Civil Works
Works
210 days
PANAGARH
Class D and Category a (i) (Building)
6 documents required · 6 mandatory
₹500
GE PANAGARH
₹95,500
Yes
9 Dec 2022
23 Aug 2022
29 Sept 2022
23 Aug 2022
27 Sept 2022
6 Sept 2022
Amount
Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed
M&L for moorum filling in floors or pavings, laid in layers n.exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed
M&L for PCC 1:4:8, D2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed
M&L for hardcore of broken stone or boulder of gauge exc 63mm but n.exc 75 mm deposited, spread & leveled in lyers n.exc 15 cm thick watered & rammed to a true surface complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and directed
Removing excavated material (soil) n.exc 50m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed
M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) with old size bricks complete all as specified and directed
Extra for forming fair finished drain or channel upto 40 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.
M&L for PCC 1:3:6 type C1 as in lintels / beam upto 1.5m clear span, and other similar bands, copings, kneelers, apex stones, bed plates, kerbs and haunching/ benching, water troughs and the like including weathering, slightly rounded or chamfered ang complete all as specified and directed
M&L for 600mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) on wall surface and finishing even and fair complete all as specified and directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles and removing rubbish off from the sire complete all as specified and directed.
M&L for fly ash brick straight or curved on plan.exc 6 mtr mean redius built in CM (1:6) complete all as specified and directed
Taking down cement plaster, any description on brick or stone walls and ceiling, chajja, landing etc including racking of joints hacking for key scrubbing down with water etc complete all as specified and directed.
M&L for 15mm thick rendering in CM (1:6) on surfaces of brick masonry wall finished even and smooth without using extra cement complete all as specified and directed
M&L for 15mm thick rendering in CM (1:4) on surfaces of brick masonry wall finished even and smooth without using extra cement complete all as specified and directed
M&L for preparation of new plastered surfaces of wall and applying three coat of white wash complete all as specified and directed.
M&L for completely removal of existing surface and applying two coats of white wash on walls compete all as specified.
Dismantaling (corrugated, semi corugated) sheet in wall cladding & roof covering complete all as specified and directed
M&L for pre- painted corrugated/semi corrigated galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in wall/ roof covering/cladding to wall, fixed with self tapping screws as specified and directed.
S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in Ridges fixed with self tapping screws complete all as specified and directed.
M&L for flat iron fillets (for securing wire mesh, CGI Sheets etc.), Hand rails, half round or other steel section including embeding in concrete and screwing etc, wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed
Dismantling wrought Iron or mild steel work of any description not otherwise provided for wind tie complete all as specified and directed.
S&F roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe-410-W (Gde-E-250) quality-A complete all as specified and directed
M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on newly steel surfaces of any description over 10cm in width or girth not otherwise described incl preparation of surfaces complete all as specified and directed
M&L for applying one coat of synthetic enamel paint on old steel surfaces of any description over 10cm in width or girth not otherwise described incl preparation of surfaces complete all as specified and directed
Taking down chowkhats or frame n.exc 1.5 Sqm each with shutter(s) (without taking off shutters from the frame), complete all as specified and directed
Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutter(s) (without taking off shutters from the frame), complete all as specified.
M&L for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
S&F 3mm thick sheet glass ordinary quality with oil putty in square n.exc 0.5m in each pane complete all as specified and directed.
S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge complete all as specified and directed.
S&F powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-chargeetc complete all as specified and directed
S&F door closer hydraulically regulated, alluminium body, designation No. 3 universal type, suitable for door shutters upto 851 to 1000 mm in width and of weight between 60 to 80 kg, ISI marked, complete all as specified.
S&F 4mm thick sheet glass ordinary quality with oil putty in square n.exc 0.5m in each pane complete all as specified and directed.
Dismantling of wall or ceilling boards of any thicness including cover fillets complete all as specified and directed
S&F 605mm x 605mm anodised aluminium snap grid frame work for false ceiling with all necessary aluminum angle & Tee arrangement with and incl fixing cleats screws etc complete all as specified in SSR and directed
S&F hangers 4 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long complete all as specified in SSR and directed.
S&F 6mm thick (non asbestos fiber) design building boards fixed in aluminium frame work in ceilling flat or sloping with screw complete all as specified.
Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise and removing rubbish off from the site complete all as specified and directed
M&L for 100mm thick PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed
M&L for 100 mm thick PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in hardstanding laid in panels with and including use and waste of formwork and to divide the area in panels and finishing the surface even and smooth with out using extra cement complete all as specified and directed
Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ when thickness of concrete slab is 100mm complete all as specified and directed.
M&L for 75 mm thick PCC type C-1 1:3:6 (using 20 mm gradded stone aggregate) finishing the as in Plinth protection surfaces even and smooth without using extra cement complete all as specified and directed.
S&F for 125 mm aluminium handles, cast type, anodised complete all as specified and directed
S&F for 150 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed
Dismantling floor hearth or wall tilling including cement mortar bedding, removing rubbish off the premises for minor repairs to floor in patches all as specified and directed.
M&L for 75mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed
M&L for machine cut kota stone slab flooring 20-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 20mm thick screed in cement mortar (1:6) complete all as specified and directed.
S&F floor door stopper of brass body 140 mm long and tongue with rubber shoes complete all as specified and directed.
M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, over & including 15 mm thick cement mortar (1:6) screed, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed
M&L for cement concrete , 1:3:6 type C1 (using 20mm graded stone aggregate) as in bed block, coping , kerb , lintel upto 1.50 m span, cills, kerbs etc complete all as specified and directed
Taking down carefully copper / aluminium conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified.
M&L for point wiring for light point/ fan point one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including suitable size PVC conduit (ISI marked), including terminal switch boxes PVC (ISI Marked) and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLS PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
All as per item No 53.00 mentioned here-in-above but One 3 pin 5 Amps socket out let points on independent board
All as per item No 53.00 mentioned here-in-above but 5 Amp socket on same board with other switches.
M&L for point wiring for one socket outlet on independent board controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated Unsheathed FRLS cables in and including suitable size PVC conduit (ISI marked), including terminal switch boxes PVC (ISI Marked) and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FRLS cable as earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
S&F switch piano flush type, single pole , 5/6 Amps, one way complete all as specified.
S&F switch socket combination 2 in 1 multipurpose 5 pin, (6 Amps) flush type controlled by one switch complete all as specified.
S&F socket outlets 2 in 1, 3 pin, 5/6 Amps flush type230/240 V complete all as specified and directed .( For Same Board only)
S&F switch socket combination 5 in 1, 6 pin , (5/16 Amps ) flush type controlled by one switch complete all as specified.
S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified.
S&F stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified .
S&F bell push, flush type, 5 amp complete all as specified.
S&F buzzer, Ding dong, AC 230 Volts, single pole 230 volts all as specified and directed.
S&F two single core, 4 sqmm nominal cross sectional area multistranded copper conductor FRLS cable, PVC insulated unsheathed 1100 Volts grade drawing in and including and including suitable size PVC conduits (ISI marked) including 4sqmm nominal cross sectional area multistranded copper conductor FRLS cable, PVC insulated unsheathed 1100 Volts grade earth wire, complete all as specified and directed. (Note: 3 run cables will be measured as single unit)
S&F two single core, 6sqmm nominal cross sectional area multistranded copper conductor FRLS cable, PVC insulated unsheathed 1100 Volts grade drawing in and including and including suitable size PVC conduits (ISI marked) including 6sqmm nominal cross sectional area multistranded copper conductor FRLS cable, PVC insulated unsheathed 1100 Volts grade earth wire, complete all as specified and directed. (Note: 3 run cables will be measured as single unit)
S&F 60 watt LED flood light fittings complete all as described here-in-below:- (i) Lumen not less than 6600 lumens. (ii) High pressure die cast aluminium. (iii) IP rating :- IP 66 (iv) Front cover : Toughened Clear glass. (v) Mounting :- Suitable for bracket arm (vi) Finish :- Epoxy powder coated with any additional treatment for smooth and anti corrisive finish. (vii) Lamp :- High bright LED with Lens. (viii) System efficacy (lm/W) of the luminaries :- Not less than 110 lm/watt. (ix) Colour temperature :- Not less than 5700K (x) Colour rendering Index (CRI) Not less than 74 (xi) Life : Not less than 50000 Hrs of opreation (xii) Optices :- Spread (Beam angle along the driveway)- 120degree, Through( Beam angle across the drive wat)- 60 degree, Beam pattern - Asymmetical driveway (xiii) Control gear:- Inbuilt electronic driver, PF not less than 0.90 and TDH less than 20% with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection :- Inbuilt surge protection minimum 5 KV (xv) Heat Sink :- As per OEMs design.
S&F 18 W LED light fitting wall mounted batten 4'ft , extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 18 watt,6000K including necessary connection complete all as specified and directed.
S&F wall mounted type decorative light fitting 1 x 9W LED, 230V AC, 50Hz complete with all accessories complete all as specified and directed.
S&F recessed mounted 2' x 2 ' LED luminaire 36 watt complete all as described here-in-below:- (i) Total system lumen not less than 3960 lumens. (ii) High pressure die cast aluminium. (iii) IP rating :- IP 66 (iv) Front cover : Toughened Clear glass. (v) Mounting :- Suitable for recess mounting (vi) Finish :- Epoxy powder coated with any additional treatment for smooth and anti corrisive finish. (vii) Lamp :- High bright LED with Lens. (viii) System efficacy (lm/W) of the luminaries :- Not less than 110 lm/watt. (ix) Colour temperature :- Not less than 5700K (x) Colour rendering Index (CRI) Not less than 74 (xi) Life : Not less than 50000 Hrs of opreation (xii) Optices :- Spread (Beam angle along the driveway)- 120degree, Through( Beam angle across the drive wat)- 60 degree, Beam pattern - Asymmetical driveway (xiii) Control gear:- Inbuilt electronic driver, PF not less than 0.90 and TDH less than 20% with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection :- Inbuilt surge protection minimum 5 KV (xv) Heat Sink :- As per OEMs design.
S&F in repair vertical distribution board double door TPN 4 way with IP 43 multiphase outgoing suitable for mounting 80 Amps as incomer with Bus bars, Neutral links complete with all accessories complete all as directed.
S&F in repairs epoxy powder coated sheet metal enclosure for DBs, double door, Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.
S&F MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs including necessary connection complete all as specified and directed.
S&F MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necesasry connection all as specified and directed.
S&F MCB TP 63 Amps, 'C' series 10kA, 415 Volts and to be housed in DBs complete including necessary connection all as specified and directed.
S&F in repair MCCB of 4 pole , 415volts of capacity 80 Amps with breaking capacity of 16 KA Fixed thermal and fixed magnetic setting including necessary connection complete all as specified and directed.
M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth wire electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth wire encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion.
Taking down of AC ceiling fan of any sweep & any height and opening the fan and oiling, greasing and replacement of unserviceable accessories and servicing, complete overhauling and re-assembling and testing complete for efficient functioning and hanging it back in position including provn of 0.5 Sqmm copper flexible twin twisted cable (length n.exc 0.5 metre) from ceiling rose to fan as directed by the Engr-in-Charge. (Note : Accessories such as gun metal bush and split pin and jam nut shall be measured and paid under relavtem here-in-after).
M&L for painting of ceiling fans upto 1400mm sweep and exhaust fan carefully, dismantling fan blades and paint with one coat of synthetic enamel paint including filling cavities with filler after cleaning all dust etc complete all as directed.
subash chander bahl
M/S SEHGAL CONSTRUCTION
MS ROYAL CONSTRUCTION INDEX NO 158 2010 BKP
HIGH HILLS INFRA
SARASWATI ENTERPRISE (INDEX NO CEEC D-81)
UNIVERSAL TRADING
Hooghly Construction Co.
Jaibalaji Enterprise
SUPARNA TRADING
ROY ENTERPRISE
UNITED BUILDERS
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .