Restoration and demarcation of canal land from Km 0.000 to Km 41.981 of Nagapur Dy. in Pratapgarh Distt.

Amount

Excavation of foundation in ordinary soil/sandy loam, clay or sand including lift up to 1.5 meter and lead up to 30 meter including filling, watering, ramming, of excavated earth into the trenches or up to the space and sides of the foundation trenches or into charge up to a distance of 30 meter from the foundation trenches.

Earth work in strengthening bank of canal Embankment by hydraulic excavator (Poclain/JCB ) including proper compaction in layers and dressing with initial lead 15 m and lift of 5 m each in all type of soil as directed by site in charge.

Earth work in correcting internal section/Silt clearance of canal by hydraulic excavator (Poclain/ JCB) with side slope cutting at required slope including all lead & lift in all type of soil with proper disposal, compaction and dressing of bank and daula as directed by site in charge.

E/W in restoration of bank,Daula with material and labour etc.

E/W in making Ramp approach Road Diversion including all types of soil with all cost of labour,material & T&P etc.complete as per direction of Engineer in charge.

laying P.C.C. work in 1:3:6 (M-10) in Foundation including all cost of material,labour T&P etc. for complete work.

Laying C.C. M-15(1:2:4) Grade Conc. With 10 to 20 mm stone gritt in foundation including all cost of material, labour etc. complete as per direction of Engineer in charge.

First class brick work 1:4 CM of wall including cost of all material ,labour,T&P.

1st Class Brick work in 1:3 CM including 3 M lift and 60 M lead including all cost of material, labour, T&P etc. complete.

10 to 15 mm thick Cement Plaster in 1:4 cement mortar single coat plastring finish even & smooth including all cost of material labour T& P etc for complete work.

Cement Plaster in 1:3 cement mortar including all cost of material, labor T&P for proper completion of work

Struct deep Cement pointing in 1:2 cement mortar including cost of labour, materials T&P etc proper completion of work as per direction of Engineer in charge

Laying C.C. 1:1.5:3 (m-20)in including all cost of material labour T & P etc. for complete work.

Reinforced Cement Concrete ( R.C.C.) 1:1.5:3 (M-20) with cement, coarse sand and using suitable mechanical mixture and mechanical vibrator, as per direction of Engineer - in charge, including all lead, lift and delift, with cost of all materials, taxes, royalty, carriage, labour, proper curing, and T & P charges required for proper completion of the work but excluding cost of reignforcement steel and centering & shuttering.

Reinforced Cement Concrete ( R.C.C.) grade M-25 with cement, coarse sand ( F.M. more than 2.0) and using suitable mechanical mixture and mechanical vibrator, as per direction of Engineer - in charge, including all lead, lift and delift, with cost of all materials, taxes, royalty, carriage, labour, proper curing, and T & P charges required for proper completion of the work but excluding cost of reignforcement steel and centering & shuttering.

Providing & Laying 100mm thick coarse sand

Providing and lying stone grite 4.75 mm to 20 mm.

Providing and lying 150 micron thick L.D.P.E film

Face to be painted with sealing primer Between constraction joint .

Filing sealing compound betwwen constraction & contraction joint in groove.

Centering & Shuttering work including cost of all material, labour etc. complete as per direction of Engineer in charge.

Shuttering workfor Plain Cement Concrete including cost of all material, labour etc. complete as per direction of Engineer in charge.t

Centering & shuttering for sleeper , C.C lining & Landing.

Centering & shuttering for C.C.Bed Block including cost of Shuttering, T&P etc. for complete work.

Providing weep holes in reinforced concrete abutment , wing wall , return wall with PVC 110 mm dia pipe extending through the full width of the structures

Providing & Fixing wheel guard with material and labour etc.

Dewatering by hiring 5H.P. diesel pumps including operator & P.O.L. complete as per direction of Engineer-in-charge

Supplying and Fixing Sign Board For Information Fabricated with steel angles,flats and plates including all material,labour T&P etc. complete As per direction of Engineer-in-charge.

Cutting bending & binding and Steel Reinforcement including all cost of labour material & T&P etc.

Painting two coats of water proofing cement paint of approved make, quality and shade on new wall surface, over one coat of white cement primer, after thoroughly brushing and proper curing, including cost of all materials, all taxes, labour, T&P charges required for proper completion of the work.

Painting two coats of Oil bound distemper of approved make, quality and shade, over one coat of cement primer on new surface after thoroughly brushing and making surface even with wall putty including cost of all materials, all taxes, labour, T&P charges required for proper completion of the work.

Providing and laying non-pressure NP2 class (light duty) 150mm dia R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc.

Dry brick on edge pitching including preparation of sub grade and filling joints with local sand including cost of Material,Labour T&P etc.

Supplying and laying Old dry brick soling below approach slab complete in all respect, as per direction of Engineer - in - charge, including all lead, lift and delift, with cost of all materials, taxes, royalty, carriage, labour and T&P charges required for proper completion of the work.

Supplying and laying 20-40mm size shankargarh stone ballast pitching complete in all respect, as per direction of Engineer - in - charge, including all lead, lift and delift, with cost of all materials, taxes, royalty, carriage, labour and T&P charges required for proper completion of the work.

Filling local sand including all cost of material, manual compaction, raming & watering ,Labour T&P etc complete.as per direction of Engineer in charge.

Repair of steel gate at head regulator, X-regulator Minors & Distributry top and side channel ISMC frame channel ISMC bracing of angle iron 6 mm thick MS Plate,round driving shoft 50mm dia ,75mm dia GI cover pipe ,thrust bearing ,gun metal bush,chucknut of 4.0 kg driving wheel,two coat painting over primer coat with taking out decayed gate from site carriage to workshop, workshop to site,errection of site including all cost of material ,labour charges, T&P etc required to complete.

Dismantling reinforced cement concrete 1:2:4 including stacking of dismantled materials as directed by Engineer-in-charge within a distance of 60m.

Dismantling brick work or stone work and cement mortar including stacking of material as directed by Engineer in charge within distance of 60 m.

P/Laying M-25 Grade conc. With 10 to 20 mm stone gritt in wearing coat including cost of material

Writing letters above 8cm and upto 15 cm size complete including supply of all material labour & T&P etc.

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately Holes 90 cm dia, and 90 cm deep

Providing and stacking of Dalbergia sissoo (Seasam) of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge

Half brick circular tree guard in bricks, internal diameter 1.25 metre and height 1.2 metre above ground and 0.20 m below ground, bottom two courses laid dry and top three courses in cement mortar 1:6 (1 cement : 6 fine sand) and the intermediate courses being in dry honey comb masonry as per design complete With common burnt clay F.P.S. (non modular) bricks of class designation 5.0

K.P. INFRASTRUCTURE (BID ID -4744679)