SPL REP AND ROOF TREATMENT OF BLDG NO. 59 OFFRS MESS OF C BN IN THE AREA OF AGE BR II UNDER GE FAIZABAD

Amount

M&L for providing water proofing treatment on RCC roof slab including multi storied buildings as per following operations and specifications :-

Dismantling of brick tiles or terracing tiles single layer laid over roof slab including stacking the serviceable tiles and rubbish off the premises complete all as specified and directed.

M&L for cement concrete (1:2:4) type B-0 (using 12.5 mm graded crushed stone aggregate) for roof padding complete all as specified.

M&L for 10 mm thick plastering in cement mortar (1:3) mixed with liquid water proofing compound @ 200 ml per 50 kg bag of cement or as per manufacturer's instructions, finished even & smooth without using extra cement complete all as specified. Note:- WPC shall be measured and paid for seperately at supply only rates.

M&L for cleanig of plastered surfaces of roof slab, applying a coat of bituminous primer at the rate of 0.30 ltr per sqm and applying evenly a tack coat of industrial bitummen 85/25 at the rate of 1.20 Kg per sqm complete all as specified.

M&L for laying APP based polymeric membrane minimum 3 mm thickness (weighing not less than 3.0 Kg per Sqm), reinforced with polyster non woven fabric (weighing not less than 150 gms/Sqm) by torch application. The over lap shall be 100 mm on transverse direction & 75 mm on longitudinal direction and applying evenly a coat of industrial bitummen 85/25 at the rate of 1.20 Kg per sqm over laid & jointed polymeric membrane complete all as specified and directed.

M&L for cutting out cracks to V-section in existing roof slab or terracing, cleaning out, wetting and grouting with cement and sand slurry (1:3) complete all as specified and directed.

M&L for 40 mm brick tiles laid over and including 15 mm thick bedding layer in cement mortar (1:4) mixed with liquid water proofing compound @ 200 ml per 50 Kg bag of cement or as per manufacturer's instructions, over water proofing membrane and pointed flush in cement mortar (1:3) mixed with & including linseed oil @ 5% by wt of cement complete all as specified and directed. Note:- WPC shall be measured and paid for seperately at supply only rates.

Supply only liquid water proofing compound complete all as specified and directed.

Taking up or down 15mm dia bore steel tubing and connections, including cleaning for re-fixing and re-fixed in new or old position to walls or laid in floor etc including renewal of defective fittings complete all as specified and directed.

Taking up or down 20mm dia bore steel tubing and connections, including cleaning for re-fixing and re-fixed in new or old position to walls or laid in floor etc including renewal of defective fittings complete all as specified and directed.

Taking up or down 15mm dia bore steel tubing and connections and S&F new 15 mm dia bore GI tubing, medium grade with all fittings and fixed to walls or laid in floors complete all as specified and directed.

Taking up or down 20mm dia bore steel tubing and connections and S&F new 20 mm dia bore GI tubing, medium grade with all fittings and fixed to walls or laid in floors complete all as specified and directed.

Taking down cement plaster on brick or stone walls of any description including raking out joints, hacking for key, scrubbing down with water to receive plaster removal of rubbish off the premises etc and M&L for 15mm thick rendering in cement mortar (1:6) on other than fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

Taking down cement plaster on brick or stone walls of any description including raking out joints, hacking for key, scrubbing down with water to receive plaster removal of rubbish off the premises etc and M&L for 15mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing old decorated or plastered surfaces of walls of any description and pasting 3D Wall Paper of any colour and pattern as approved by GE complete all as directed

M&L for preparing old decorated surfaces of walls by complete removal of existing treatment of any description and applying two coats of exterier acrylic paint over one coat of primer over 2mm thick wall care putty complete all as specified and directed.

M&L for preparation of old decorated surfaces of ceiling and applying one coat of oil bound distemper complete all as specified and directed.

M&L for preparition of old decorated surfaces of walls by complete removal of existing treatement of any description and applying two coats of interier acrylic paint over one coat of primer over 2mm thick wall care putty complete all as specified and as dirceted by Engineer-in-Charge .

M&L for preparation of newly plastered surfaces of walls and applying two coat of exterior acrylic paint over one coat of primer over 2mm thick wall care putty complete all as specified and as dirceted by Engineer-in-Charge .

M&L for prepararion of newly plastered surfaces of walls and applying two coat of interier acrylic paint over one coat of primer over 2mm thick wall care putty complete all as specified and as dirceted by Engineer-in- Charge .

Dismantling of existing water storage tank of any description and S&F new 500 ltrs capacity rotational moulded polythene water storage tank in three layers (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I and directed by Engineer-in-Charge.

Disconnecting existing water storage tank of capacity exc 250 & n.exc 500 ltrs, setting aside (or lowering if required) for repairs including cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipes, etc and hoisting if required, reconnecting and re-fixing in position complete all as specified and as directed by Engineer-in-Charge

S&F in repairs, 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe fixed complete all as specified and directed.

Taking down chowkhat or frame (with shutter w/o taking off shutter from the frame) exc 1.5 sqm but n.exc 4 sqm each complete all as specified and directed.

Taking down chowkhat or frame (with shuuter w/o taking off shutter from the frame) n. exc 1.5 sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 sqm but n.exc 2.0 sqm each each leaf complete all as specified and directed.

S&F 35 mm thick, 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain, chamferd or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutter as specified in SSR Part-I Section 8 Clause 8.24(a) and fitted to chowkhat or frame complete all as specified and directed.

S&F 35 mm thick flush shutters, solid core construction with block board core and plywood face panels, commericial type on both sides and fitted to chowkhat or frame complete all as specified and directed.

S&F 150 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150 mm long aluminium handles, cast type, anodised and fixed complete all as specified and directed.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

M&L for preparing new or previously untreated wooden or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed

Supply only stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aoerture of 1.40 mm fixed with stainless steel staples, complete all as specified and directed. (Fixing charges included in rates glazed and skeleton shutters).

S&F pressed steel frame of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.

S&F solid PVC door frame (single rebated) of size 50mm x47 mm made out of 5 mm wood grain printed PVC sheet and edges will be painted to match the printed sheets reinforced with MS square tube complete all as specified & shown on drawing.

S&F 28 to 30 mm thick (syles) factory made solid PVC moulded with particle board core door shutter with 2, 4 or 6 raised panels designed with 2 mm thick moulded PVC sheet on the front panel and 2 mm plain colour PVC sheet on back face and fitted in frame at site as per specification & drawing.

S&F 150mm size aluminium handle fabricated type, anodised and fixed complete all as specified and directed by Engr-in-charge.

S&F 100 mm size stainless steel butt hinges medium weight cold rolled and fixed complete all as specified and directed by Engr-in-charge.

S&F 250 mm size mild steel sliding door bolt not less than 12 mm dia with and including a minimum of 6 bolt and nuts, four on bolt plate and two on staple plate , complete all as specified and directed by Engr-in-charge.

S&F 150 to 200 mm size mild steel helical door spring including roller and roller plate complete all as specified and directed.

M&L for PCC (1:2:4) type B0 (using 12.5 mm graded crushed stone aggregate) as in filling in pressed steel door frame, lintels upto 1.5m clear span, cills, steps, seismic and other similiar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, bed plates, copings, kerbs, water troughs and the like includind weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

S&F in repair, aluminium alloy body & tongue floor door stopper of overall length of cover 140mm, anodised, with hard drawn steel spring and fixed complete all as specified and as directed by Engr-in-Charge

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubish off the premises complete all as specified and directed.

M&L for joint free (600mm x 1200mm) x 8 to 10 mm thick coloured glazed ceramic tiles as in dado/vertical services, laid over and including 10mm thick rendering in cement mortar (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed.

M&L for Virified double charged (dark shade) tiles 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, laid over and including 15mm thick screed bed in cement mortar (1:6) in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

M&L for Virified double charged (dark shade) tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, laid over and including 10mm thick rendering in cement mortar (1:4) as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

M&L Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm (size not less than 400mmx40mm) laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M&L for non skid coloured heavy duity (Endura) tiles, 8 to 10mm thick (square) of size 300mmX300mm, laid over and including 15mm thick screed bed in cement mortar (1:6) in floors etc complete all as specified and directed by Engr-in-Charge.

S&F in repairs, vitreous china squatting pan, Orissa pattern, size 580 X 440 mm white, with integral foot rests (excluding cistern and flush pipe) but including connection to trap and to flush pipe, anti-Syphonge pipe and including trap set in lime concrete etc and making good disturbed area to match the existing floor surfaces , complete all as specified.

S&F in repairs, 10 Ltrs PVC valveless, syphonic action type flushing cistern low level, white with inlet, ball valve, float and handle including brackets, complete all as specified.

M&L for mild steel framed work as in window guard bars, grills and like items, plain, let in and fixed independently in wooden frames, L or T Section support for shelves and similars articles conforming to Fe-290 Gde E-165 , complete all as specified.

S&F in repair, 100mm size stainless steel grating (square/round) with or without hole and in white cement complete all as specified and directed.

S&F 20mm dia bore gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipes complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/ spring clips and S&F new 3mm thick sheet glass ordinary quality and glazing with putty / wooden beads in squares n.exc 0.50 Sqm each pane upto three storied buildings complete all as specified and directed by Engr-in-charge.

S&F in repairs, pre-laminated particle board 18/19mm thick, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed to nails for working table/storage almirah/kitchen shelf and cupboars shutters complete all as specified and directed.

S&F 40 mm width of flap when open continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness, laid dry in floors, aprons etc complete all as specified.

M&L for 60mm thick machine pressed precast concrete M35 grade interlocking paver block, glossy and moulded with grey cement and pigment of any size and shape, conforming to IS 15658-2006, laid over sand cushioning complete all as specified. Note: Sand for cushioning shall be measured and paid for separately under respective item of Schedule 'A'.

M&L for sand for filling /cushioning to paver blocks, laid and spread in 30mm thick unifor layer complete all as specified and directed.

Demolition of concrete in ground floor, roof,pavings n.exc 15cm thickness including floor finishes like tiles if any of any description complete all as specified and directed.

M&L for 75 mm thick plain cement concrete (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in sub-base of floors, plinth protection finished the surface of concrete fair and even, complete all as specified.

M&L for preparing new steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S&F in repairs, 15mm dia bore single lever basin mixer, chromium plated, fancy type without Popup waste with 450mm long braided hoses of standard quality for mixing hot & cold water, with all fittings etc, complete all as specified. Make: Jaquar, Cat Part No. ORP-10011BPM or equivalent as approved by GE

S&F in repairs, 15m dia bore single lever wall mixture 3 in 1 system with provision for both Hand shower and Overhead Shower with 115mm long bend pipe, connecting legs & wall flange (without Hand & Overhead Shower) of standard quality including all necessary fittings, complete all as specified. Make: Jaquar, Cat Part No. ORP-10125PM or equivalent as approved by GE

S&F in repairs, 15mm dia bore chromium plated over head shower of 180 mm dia, round shape, songle flow (ABC Body chromium plated with grey face plate) with rubit cleaning system including all necessary fittings as per manufacturer's instructions complete all as specified. Make: Jaquar, Cat part No. OHS -1759 or equivalent as approved by GE

S&F in repairs, vitreous china urinal without sensor, size 740mmx380mm of rectangle shape, gloss finish and fixed complete all as directed by Engineer-in-Charge. Make- Jaquar Cat part No. URS-WHT-13255 or equivalent as approved by GE

S&F in repairs, Rimless Single piece WC with UF soft close seat cover, hinges, fixing accessories, accessories set and cistern fittings, size 390x710x720 mm including connection to trap and drain complete all as specified and directed by Engr-in-Charge. Make - Jaquar Modle No. VGS-WHT-81853S300UF or equivalent as approved by GE.

S&F for wash hand basin with PVC VANITY 24" including waste pipe, waste cupling and all fittings complete all as specified and directed by Engr-in-Charge. Make -Somany /CERA or equivalent as approved by GE

S&F in repairs, 15 mm bore CP fancy type bib cock with wall flange, scewed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified. Make - Jaquar, Cat Part No. ORP-10037PM or equivalent as approved by GE

S&F in repairs, 15 mm bore angular stop cock with wall flange screwed down both ends for iron pipe and fixed complete all as specified and directed. Make - Jaquar Cat Part No. ORP-10053PM or equivalent as approved by GE

S&F in repairs, stainless steel toilet paper holder fixed with PVC ravel plugs and screws to wall surfaces complete all as specified and directed. Make - Prayag Cat No BA 88 or equivalent as approved by GE

S&F in repairs, sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard complete all as specified and directed.

S&F in repairs, PVC connection 15mm size of length 450mm with PTMT nuts at both ends and fixed complete all as specified and directed.

S&F in repairs, health faucet with 1 mtr long flexible tube with wall hook complete all as specified. Make Prayag Cat No BEA 85 or equivalent as approved by GE

S&F in repairs, stainless steel soap diish, fixed to wall complete all as specified.

S&F in repairs, brass chromium plated towel rack and fixed complete all as specified and directed by Engr-in-charge. Make- Prayag Cat No BA 02 or equivalent as approved by GE

M&L for 18-20mm thick granite stone slab of any type work table rubbed and polished in steps, jambs, pillars, window cills, cooking platforms and the like, set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work exc 15 cm but n.exc 30 cm in width or girth including cutting to edges, all mitres and stopped ends, etc complete all as specified and directed.

Dismantling false ceiling / wall cladding of any description including supporting frame of any description complete all as specified and directed.

M&L for providing and fixing Gypsum Board 12mm thick in ceiling fixed with screws as per manufacturer's instructions incluning Gl frame work for seamless including ceiling comprising of Gl perimeter channnel 0.55 mm thick with flanges all as per manufacturers instructions complete all as specified and directed.

M&L for solid PVC Wall Lining consisting of 5mm thick wood grain printed colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

S&F in repairs, 19/20 mm dia stainless steel drapery curtain rod with glossy finish, fancy type and side finials (Latto) as approved by GE including fixing arrangement complete all as specified and directed by Engr-in-charge..

S&F TMT steel bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends etc and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for RCC (1:2:4) type B -1 (using 20mm graded crushed stone aggregate) slabs supported on wall , beams and column in floor, roofs ,chajja ,landing ,balconies , canopies, deck slabs and in shelves and the like complete all as specfied and directed

S&F in repairs, 0.63 mm thick plain, galvanised mild steel sheeting in stepped flashings, measured as the minimum rectangle from which the pieces can be cut, complete all as specfied and directed by Engineer-in-Charge.

Use & waste formwork to rough finished surface of concrete edges, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n.exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n.exc 20cm wide complete all as specfied and directed

S&F 12mm thick frosted /itched toughened glass as in doors, area exc1.5m but n.exc 4 Sqm each including all necessary arrangements such as floor spring, chromium plated fancy type bow handles, locking arrangements etc complete all as specified and as directed by Engr-in-Charge.

S&F anodised aluminium sections in any type of door, openable / sliding windows and ventilators etc including fabrication of frame, shutter including joining cleats, rubber gasket, glazing clips, handle and locking arrangement etc complete all as specified and directed by Engr-in-Charge.

Supply only 5mm thick heat absorbing glass and glazing with beads fixed with brass screws complete all as specified and directed by Engr-in-charge.

S&F in repairs, double action floor door spring hydraulically regulated made of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover,govering pivot made of mild steel heavy duty suitable for aluminium door complete all as specified and directed.

M&L for 15 cm x15 cm size POP cornice of desgin and pattern as approved by GE complete all as specified and directed .

Taking down carefully copper / aluminium point wiring (light, fan, call bell, two way, socket or power) complete with fittingS&Fixtures such as switches, ceiling roses, pendants, regulators, tube fittings and other kitS&Fittings, removing unserviceable materials from work site and making good disturbed portion / surface of wall/ floor/ ceiling etc by using cement mortar (1:4) including white / colour wash / distempering etc as required to match with the existing surfaces / location complete all as specified and as directed.

M&L for concealed type point wiring with PVC insulated PVC unsheathed electric (FRLS) cable of size 1.5 Sqmm nominal cross sectional area, 1100 Volt grade, single core having multi stranded copper conductor with 1.5 Sqmm green colour PVC insulated unsheathed electric (FRLS) cable having multistranded copper conductor as earth wire connected to earth dolly by providing lugs including non-modular type GI sunken boxes suitable for non-modular switches/sockets etc with 3mm thick hylam sheet with glossy finish including necessary cutting for fixing switches, sockets, regulators etc, drawn through and including non metallic rigid PVC conduit (ISI marked) medium grade not less than 20mm dia with all conduit accessories in concealed wiring system including cutting chases in wall and making good in cement mortar (1:4) with all necessary surface finishes such as white / colour wash / distempering etc to match the existing surfaces complete all as specified for the following:-

One light point or fan point controlled by one switch

One 3 pin socket outlet 5 amps on same board with other switches

One 3 pin socket outlet 5 amps socket outlet on independent board below the switch board of light point in the same vertical plane.

M&L for concealed type power point wiring for with PVC insulated PVC unsheathed electric (FRLS) cable of size 2.5 Sqmm nominal cross sectional area, 1100 Volt grade, single core having multi stranded copper conductor with 2.5 Sqmm green colour PVC insulated unsheathed electric (FRLS) cable having multistranded copper conductor as earth wire connected to earth dolly by providing lugs including non-modular type GI sunken boxes suitable for non-modular switches/sockets etc with 3mm thick hylam sheet with glossy finish including necessary cutting for fixing switches, sockets, regulators etc, drawn through and including non metallic rigid PVC conduit (ISI marked) medium grade not less than 20mm dia with all conduit accessories in concealed wiring system including cutting chases in wall and making good in cement mortar (1:4) with all necessary surface finishes such as white / colour wash / distempering etc to match the existing surfaces complete all as specified for the following:-

S&F switch piano flush type polycarbonate single pole one way 6 Amps complete all as specified and directed.

S&F switch piano flush type polycarbonate single pole one way 16 Amps complete all as specified and directed.

S&F socket outlet polycarbonate 2 in 1, 5 pin 6 Amps flush type complete all as specified and directed.

S&F socket outlet polycarbonate 2 in 1, 3 pin 6/16 Amps flush type complete all as specified and directed.

M&L for ceiling rose in polycarbonate 3 terminal brass flush type 6 Amps, 250 Volts, AC supply (ISI marked), fixed on & including 3 mm thick 75mm dia sunmica hylum plastic laminated round sheet complete all as specified and directed.

S&F electronic fan regulator 230 Volts, stepped type (5 steps) socket type, hum free 100/300 watt, complete all as specified and directed.

M&L for concealed type point wiring with PVC insulated PVC unsheathed electric (FRLS) cable of size 1.5 Sqmm nominal cross sectional area, 1100 Volt grade, single core having multi stranded copper conductor with 1.5 Sqmm green colour PVC insulated unsheathed electric (FRLS) cable having multistranded copper conductor as earth wire connected to earth dolly by providing lugs including modular type GI sunken box with modular cover plate and frame suitable for modular switches/sockets etc, drawn through and including non metallic rigid PVC conduit (ISI marked) medium grade not less than 20mm dia with all conduit accessories in concealed wiring system including cutting chases in wall and making good in cement mortar (1:4) with all necessary surface finishes such as white / colour wash / distempering etc to match the existing surfaces complete all as specified for the following:-

One light / fan point controlled by one,one way switch

One bell point controlled by one bell push

One socket outlet point 6 A on independent board

One socket outlet point 6 A on same board

M&L for concealed type power point wiring with PVC insulated PVC unsheathed electric (FRLS) cable of size 2.5 Sqmm nominal cross sectional area, 1100 Volt grade, single core having multi stranded copper conductor with 2.5 Sqmm green colour PVC insulated unsheathed electric (FRLS) cable having multistranded copper conductor as earth wire connected to earth dolly by providing lugs including modular type GI sunken box with modular cover plate and frame suitable for modular switches/sockets etc, drawn through and including non metallic rigid PVC conduit (ISI marked) medium grade not less than 20mm dia with all conduit accessories in concealed wiring system including cutting chases in wall and making good in cement mortar (1:4) with all necessary surface finishes such as white / colour wash / distempering etc to match the existing surfaces complete all as specified for the following:-

S&F modular type white colour switch 6 Amps one way, AC 230 Volts in one module all as specified and as directed.

S&F modular type white colour switch 16 Amps one way, AC 230 Volts in one module all as specified and as directed.

S&F modular type white colour shuttered socket 6 Amps 2/3 pin combined, 230 Volts in 2 modules all as specified and as directed.

S&F modular type white colour shuttered socket 16 Amps 2/3 pin combined, 230 Volts in 2 modules all as specified and as directed.

S&F modular type white colour bell push 6 Amps, 230 Volts in 2 modules all as specified and as directed.

S&F modular stepped fan regulator white colour 120 Watt, AC 230 Volts suitable for 2 modules including connecting complete all as specified and as directed.

M&L for point wiring with 4.0 Sqmm (nominal cross-sectional area) FRLS PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including non-metallic rigid PVC conduit concealed of adequate size with all fittings and accessories including non-metallic rigid PVC conduit of adequate size with all fittings and accessories including metal flush boxes with modular cover plate with frame of suitable size including one run of FRLS PVC insulated & unsheathed single core multistranded copper conductor cable of size 2.5 Sqmm green in colour as earth continuity conductor connected to common earth dolly for AC socket on independent board, complete all as specified including cutting chases and making good as per existing specification.

S&F plug and DBOX MCB Protected Socket complete with 25A MCB DBOXX COMBO DP, 240 volts single phase for AC all as specified and directed. Make- Havells Cat No. DHDMCDP0253025 or equivalent in Bajaj/ Anchor as approved by GE

Taking down existing submain wiring of any description and M&L for sub main wiring with two runs of 10.00 Sqmm (nominal cross-sectional area) FRLS PVC insulated & unsheathed 1100 Volts grade multistranded copper conductor single core cable drawn through and including PVC concealed conduit of adequates size and fittings and accessories concealed in walls, floors and ceilings complete including one run of FRLS PVC insulated & unsheathed single core multistranded copper conductor cable of size 10.0 Sqmm green in colour as earth continuity conductor connected to common earth dolly from main DB to Sub DB including cutting chases and making good in cement mortar (1:4) with all necessary surface finishes such as white / colour wash / distempering etc to match the existing surfaces complete all as specified. Note:- (i) Two runs of cable, one run of earth wire and one run of PVC non metallic conduit shall be measured as one run length. (ii) Cable required for connection to DBs and MCBs shall be deemed included in quoted rates. (iii) Earth wire shall run inside the conduit pipe.

Taking down existing submain wiring of any description and M&L for sub main wiring with two runs of 6.00 Sqmm (nominal cross-sectional area) FRLS PVC insulated & unsheathed 1100 Volts grade multistranded copper conductor single core cable drawn through and including PVC concealed conduit of adequates size and fittings and accessories concealed in walls, floors and ceilings complete including one run of FRLS PVC insulated & unsheathed single core multistranded copper conductor cable of size 6.0 Sqmm green in colour as earth continuity conductor connected to common earth dolly from main DB to Sub DB including cutting chases and making good in cement mortar (1:4) with all necessary surface finishes such as white / colour wash / distempering etc to match the existing surfaces complete all as specified. Note:- (i) Two runs of cable, one run of earth wire and one run of PVC non metallic conduit shall be measured as one run length. (ii) Cable required for connection to DBs and MCBs shall be deemed included in quoted rates. (iii) Earth wire shall run inside the conduit pipe.

Taking down unserviceable main switch, DB’s insulators, DB for MCB and board etc. of any type and any capacity and further disposal including making good the disturbed surface and matching the colour of wall with the existing colour wash/ paint/ distemper wherever required complete all as specified and as directed.

S&F epoxy powder coated MCB distribution box double door 415 V TPN 4 way vertical type for MCBs alonwith provn of MCCB as incomer with common bus-bar at incoming end of outgoing MCBs grouted/ flush to wall complete all as specified and directed. Note: - MCCB and MCBs shall be measured and paid for under respective item of Schedule 'A.

S&F MCB, TPN , 100 A, 415V 10kA 'C' curve miniature circuit breaker (MCB) complete includin necessary connection, testing and commissioning complete all as specified and directed.

S&F MCB SP 40 Amps, 240 Volts 'C' curve 10 kA including necessary connection complete all as specified and as directed.

S&F epoxy powder coated MCB, DB, double door SPN 8 way for MCBs with common bus-bar at incoming end of outgoing MCBs grouted/ flush to wall all as directed.

S&F MCB SPN 32 Amps, 230 Volts 'C' curve10 kA including necessary connection complete all as specified and as directed.

S&F MCB Single Pole (SP) 'C' curve 10kA breaking capacity of 6 to 40 Amps, 240 Volts in proper position all as specified and as directed.

Disconnecting and taking down existing light fittings of any description and S&F new indoor luminare batten for wall/ceiling mounting box type energy efficient saving LED BATTEN LIGHT 20 W including twin twisted copper conductor flexible wire from ceiling rose to connector complete all as specified and as directed.

S&F in replacement, lamp holder PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as speicfied.

Disconnecting and taking down existing light fittings of any description and S&F new LED light fitting mirror type withhigh out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Disconnecting and taking down existing light fittings of any description and S&F new LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including hermal management in multiple optics complete with IP 65/66 protection complete.

Disconnecting and taking down existing light fittings of any description and S&F new round 18 W LED 6500 K suitable slim, compact, aluminum die cast edge lit panel. Recess mounted round fixture with opal diffuser and separate electronic driver. including all fixing accessories complete all as specified and directed. Make : Havells Cat No :LHEBHDP7IZ1W018/Bajaj/Philips/SYSKA or equivalent as approved by GE.

Taking down existing earthing of any description and M&L for new earthing complete with galvanized steel plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 meter below normal ground level surrounded with mixture of charcoal and common salt in alternate layers from all sides and electrode connected to GI wire of 4mm dia by means of GI bolts, nuts, check nuts and washers, earthing wire protected by GI pipe 20 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I including all necessary excavation and earth work in any type of soil, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6) type C1 in concrete chamber of size not less than 300x300x300mm (internal diamentions) with cover made of precast cement concrete (1:2:4) type B-1 (using 20mm grded stone aggregate) complete all as specified and directed by Engineer-in-Charge. Note: (i) The chamber shall be constructed at 1.00 meter away from outer edge of earthing pit. (ii) The unit rate includes earthing wire and protection pipe upto maximum 7.50 meter from earth plate, earth point / test point.

Saket Traders

Matrubhoomi Construction

JYOT BUILDERS

ABC CONSTRUCTION CO

M/S AVADH ENTERPRISES

His And Her Enterprises

M/S SWATI CONSTRUCTION

R K BROTHERS