PROVN OF DG SET 125 KVA W/O AMF PANEL INCLUDING CABLING AND EARTHING FOR SECURITY / PERIMETER LIGHTING, SIGNAL AND COMPUTER INSTALLATION IN SEWAR FORT AND 30 KVA GENERATOR SET AND COMPLETE INSTALLATION FOR COMPUTER ROOM AT BHARATPUR MILITARY STATION

Amount

Excavation in trenches in soft/loose soil not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shafts, wells, cesspits, man holes, pier holes etc, not exc 10 sqm on plan and n exc 1.5m in depth and getting out complete all as specified and directed.

M&L for returning filling in approved excavated soil including spreading levelling and well ramming in layers n.exc 25cm thick complete all as specified and directed.

Removing surplus soil to a distance not exceeding 50m & depositing at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Supply & spread unwashed dry river sand for sand cushioning and covering the under ground cable in trenches complete all as specified and directed. Note : Punning thickness shall be measured.

M&L for brick covering to underground electric cable using sub class "B" old size brick laid dry flat over pendicular to the direction of cable complete all as specified and directed.

Boring of holes under road, pavement, hard stading by trenchless technology using ultra sounding technique and necessary machine for laying under ground pipe upto 100mm dia complete all as specified and directed. Note : GI pipe shall be measured and paid separately.

M&L for 80mm bore GI pipe light grade laid in trenches or fixed to wall / pole for protection of cable / earthing strip etc complete all as specified and directed.

Supply, install, testing and commissioning of silent Diesel engine driven Generating set AC, 415 volts, 3 phase 4 wire 50 Hz, PF 0.8 lagging, 1500 RPM of capacity 125 KVA with accoustic enclosure, Noise level dBA<75 comprising of the following and testing complete all as specified and directed. Make : Kirlosker Green Model No KG1-125 WS or equivalent Model of Greaves Power / Cummins as approved by GE.

(A) Diesel Engine : Four cylinder, Liquid cooled, Naturally aspirated and developing 156 BHP @ 1500 RPM, vertical engine, electric start, compression ignition, 4 stroke designed to run continously @ 1500 RPM comfirming to IS 10002 /ISO 3046, BS : 5514 standards with an overload capacity of 10% for one hour in every 12 Hours operation, DG Set to comply with CPCB-II norms and shall comprise of the following accesories. Make : Kirlosker Green Engine Model No 4K1080TA G2 or its equivalent model viz. equivalent technical specification in other makes as specified here in above. (i) Radiator, cooling system with fan (ii) Micro fuel pump with electronic governor. (iii) Dry tube air cleaner (iv) Lubricating oil filter (Spin on type) (v) 12 Volts electric starting system (vi) Battery charging alternator (vii) Stop solenoid (viii) Lub oil pressure gauge (ix) Water temprature gauge (x) Ammeter battery charging (xi) K cool super plus coolant (xii) First fill of Lub oil (xiii) Safety shut down system for low lube oil (xiv) Air valve and drain plug arrangement

(B) Alternator : Alternator suitable for continous operation rated at 1500 RPM, 415 Volts, 3 Phase, 4 Wire system, rated for output 100KW / 125KVA, 50 Hz, 0.8 PF in SPDP enclosure, insulation class 'H' self excited and self regulated, brushless, foot mounted in single / double bearing construction on end shields conforming to IS-4722, BS EN 60034-1 and will be suitable for tropical condition.

(C) Accoustic enclosure : The accoustic enclosure shall be designed and manufactured conforming to relevant standards suitable for outdoor installation exposed to weather conditions, and to limit noise level of <75 db (A) at a distance of 1 metre from the enclosure as per CRCB II norms insulation confirms to VL94-HF1 class for flamability. The enclosure shall be fabricated out of CRCA sheet of thickness not less than 2.0mm thick and shall be powder coated.

(D) Control Panel (i) Control panel - Overload and earth protection including all accessories such as power contractor, relays, all material equipments etc (ii) IP rating of Control Panel - IP 53

(E) Battery (i) Battery type & specification - Low Maintenance free to IS : 14257 for high cranking performance (ii) Battery capacity (Ah) - not less than 150 (iii) Number of Battereis - 01

(F) Test Reports DG set meet requirements of Environmental (Protection) Rules 1986, in respect of noise and emission norms, as described in STC.

(G) Warranty / Installation & Commissioning (i) Warranty - 02 Years (ii) Installation and Commissioning - With insulation (iii) PCC for foundation using 1:2:4, C-2, 40mm graded. (below ground level 20cm and above GL 30cm with minimum around space 0.5m) including necessary excavation and earth work.

Supply, install, testing and commissioning of silent Diesel engine driven Generating set AC, 415 volts, 3 phase 4 wire 50 Hz, PF 0.8 lagging, Noise level dBA <75, 1500 RPM of capacity 30 KVA with accoustic enclosure, comprising of the following and testing complete all as specified and directed. Make : Kirlosker Green Model No KG1-30WS or equivalent Model of Greaves Power / Cummins as approved by GE.

(A) Diesel Engine : Three cylinder, Liquid cooled, Naturally aspirated and developing 42 BHP @ 1500 RPM, vertical engine, electric start, compression ignition, 4 stroke designed to run continously @ 1500 RPM comfirming to IS 10002 /ISO 3046, BS : 5514 standards with an overload capacity of 10% for one hour in every 12 Hours operation, DG Set to comply with CPCB-II norms and shall comprise of the following accesories. Make : Kirlosker Green Engine Model No 3R1040T G1 or its equivalent model viz. equivalent technical specification in other makes as specified here in above. (i) Radiator, cooling system with fan (ii) Micro fuel pump with mechanical governor. (iii) Dry tube air cleaner (iv) Lubricating oil filter (Spin on type) (v) 12 Volts electric starting system (vi) Battery charging alternator (vii) Stop solenoid (viii) Lub oil pressure gauge (ix) Water temprature gauge (x) Ammeter battery charging (xi) K cool super plus coolant (xii) First fill of Lub oil (xiii) Safety shut down system for low lube oil (xiv) Air valve and drain plug arrangement

(B) Alternator : Alternator suitable for continous operation rated at 1500 RPM, 415 Volts, 3 Phase, 4 Wire system, rated for output 24KW / 30KVA, 50 Hz, 0.8 PF in SPDP enclosure, insulation class 'H' self excited and self regulated, brushless, foot mounted in single / double bearing construction on end shields conforming to IS-4722, BS EN 60034-1 and will be suitable for tropical condition.

(C) Accoustic enclosure : The accoustic enclosure shall be designed and manufactured conforming to relevant standards suitable for outdoor installation exposed to weather conditions, and to limit noise level of <75 db (A) at a distance of 1 metre from the enclosure as per CRCB II norms insulation confirms to VL94-HF1 class for flamability. The enclosure shall be fabricated out of CRCA sheet of thickness not less than 2.0mm thick and shall be powder coated.

(D) Control Panel (i) Control panel - Overload and earth protection including all accessories such as power contractor, relays, all material equipments etc (ii) IP rating of Control Panel - IP 53

(E) Battery (i) Battery type & specification - Low Maintenance free to IS : 14257 for high cranking performance (ii) Battery capacity (Ah) - not less than 150 (iii) Number of Battereis - 01

(F) Test Reports DG set meet requirements of Environmental (Protection) Rules 1986, in respect of noise and emission norms, as described in STC.

(G) Warranty / Installation & Commissioning (i) Warranty - 02 Years (ii) Installation and Commissioning - With insulation (iii) PCC for foundation using 1:2:4, C-2, 40mm graded. (below ground level 20cm and above GL 30cm with minimum around space 0.5m) including necessary excavation and earth work.

Supply, laying, and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of cross sectional area of size 150 Sqmm 3.5 core complete all as specified and directed.

Supply, laying, and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of cross sectional area of size 25 Sqmm 4 core complete all as specified and directed.

Supply, installation, commissioning and testing of feeder pillar board Kiosk type, LT (415 Volts, 50 Hz, 3-phase, 4 wire supply) CPRI approved, factory assembled, out door type, weather and vermin proof (Protection Class IP-54) made out of 40mm x 40mm x 5mm angle iron frame and 3.15 mm thick (for external) and 2mm thick (for internal) MS Sheet CRCA sheet with both side (front and back) hinged , double door opening for external, rubber lining, locking arrangement, painted externally and internally with two coats of synthetic enamel gray paint (First Quality) over a coat of red oxide primer complete mounted on angle iron 40mm x 40mm x 5 mm legs 45 cm high above GL and 15 cm embedded in ground with and including blocks of PCC (1:2:4) type C1 of block size 30 x 30 x 30cm complete all as specified and directed and comprising of the following:-

(A) Incoming :- (i) MCCB 4 pole, 200 Amps rating 36 KA rupturing capacity - 01 No. (ii) ON Load changeover switch 415 volt, 4 pole, capacity - 200 Amp - 01 No. (iii) Copper bus bar 400 Amps - 04 No.

Supply and fix ON LOAD change over switch 415 Volt, fixed in factory made LT feeder pillar box (KIOSK), outdoor type, platform mounted, suitable for 415 Volts 3 Phase and neutral, made of 3.15mm thick CRCA MS sheet and MS angle iron frema work (made out of 40mm x 40mm x 6mm thick), powder coated finish on outside surface and powder coated finish inside surface (of approved shade), front opening type with aprons for cable entry with double door shutter & locking arrangement (including provision of 65mm Godrej freedom lock with2 keys), sheet metal enclosures 4 pole of capacity 200 Amps complete all as specified and directed. Make : CO22000OSOO of L&T or equivalent in Havells, C&S Electric, Schneider.

M&L for earthing complete with galvanized steel earth plate electrode size 600mm x 600mm x 6.0mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to GI earth strip 32 x 6mm by means of bolts, nuts, check nuts and washers of galvanized including GI protection pipe light grade 40mm dia connected to main earth wire on pole or control board and GI pipe medium grade 20mm dia bore for watering funnel with wire mesh. RCC cover with concrete (1:2:4) type B-1 using 8mm bars @ 100mm C/C both way with frame, PCC chamber pit with PCC (1:3:6) type C-2 including necessary excavation and earth work all as shown in electrical plate No 3 connected to earthing test point and testing on completion including taking down existing earthing complete all as specified & directed. Note : The unit rate includes for protection pipe and GI Earth strip 32 x 6mm from top of earth plate upto 7.5m above ground level.

ACESOLARR RENEWABLE ENERGY LLP

PD GUPTA AND COMPANY

M/s Ranaji Construction Co

Gupta Automobiles

Pioneer Enterprises

SHARMA ELECTRICAL ENGINEERS