Supplying, Fixing, and Replacement of Damaged Outdoor Boxes with Allied Electrical Accessories in ward no 15 Kere katte at CMC Hebbagodi Limits

Supplying, Fixing, and Replacement of Damaged Outdoor Boxes with Allied Electrical Accessories in ward no 15 Kere katte at CMC Hebbagodi Limits

Extra for Groove cutting in brick wall/CC floor to the suitable

depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete. (P2/Ino:1.7.2)

Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 m3 in volume and stock piling at designated locations and disposal of dismantle...

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers (P14/Ino: 5.7.4)

Providing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water ti...

Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc, and fixing on existing wood or metal box using NF screws (P9/Ino:3.9) Common SR 2021-22 (...

wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virgi...

Supplying and fixing 100 A 25 kA Three Pole Moulded case circuit Breaker (MCCB) over the existing wood/ Panel board using necessary screws,bolts, nuts, necessary phase separators handle and wiring com...

Supplying and Fixing 40x40x6 mm angle iron frame work fabricated out of M.S.Angle iron and M.S.Flat with bolts,washers, etc.,and painted with 2 coats of red oxide and then two coats of approved paint....

Fabricating supplying and mounting MS Box made out 14SWG suitable for floor/wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped wi...

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50m and lift upto 1.5 m....

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LT UG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 50 Sqmm,...

Laying of cable in Existing Trench/GI pipe/Stone Ware /RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff - 2.5 to 25 Sqmm (P52/Ino:21.05) Common SR 2021-22 (Electrical)

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C.cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...