REPAIR AND MAINT OF STREET LIGHTS, HIGH MAST LIGHT AND OTHER MISC WORKS UNDER GE SAUGOR

Amount

Disconnecting/taking down and re-fixing fluorescent tube light/HPSV/MH/HPMV/LED street light of any wattage or size flood lights street light fittings for repair or replacement of worn out accessories from pole up to 11 mtr complete all as specified and directed. Note:- Spare parts/ Lamp shall be measured and paid for separately

Disconnecting and taking down High mast light up to 25 Mtr height including taking down mast assy by making necessary arrangement viz telescoping ladder alongwith all safety arrangement and repositing of the same after repairing all as directed. Note:- Relevent items should be meaured and paid separately.

S&F in repairs mild steel flat iron clamps , nut bolt of existing size for bracket on pole complete all as specified and directed

S&F in repairs two single core copper wire of size 1.5 Sqmm and drawing into existing GI tubing bracket complete all as specified and directed.

S&F in repairs tubes galvanised 40 mm bore light grade bent to the shape of bracket 1.2 Mtr in length for mounting of street light fitting and fixed on pole with clamp,nut, bolt, washer and painting with two coats of aluminium paint complete all as specified and directed

S&F in repairs constant current LED driver as per exisitng make suitable for flood light fitting 240 watt complete all as specified and directed. Make - Bajaj

S&F in repairs constant current LED driver as per exisitng make suitable for street light fitting 90 watt complete all as specified and directed. Make - Bajaj

S&F in repairs constant current LED driver as per exisitng make suitable for street light fitting 72 watt ccomplete all as specified and directed. Make - Bajaj

S&F in repairs constant current LED driver as per exisitng make suitable for flood light fitting 150 watt complete all as specified and directed. Make -Wipro

S&F in repairs constant current LED driver as per exisitng make suitable for street light fitting 90 watt dimiable complete all as specified and directed. Make - Wipro cat part No LR02-112-ANA-57-ME

S&F in repairs constant current LED driver as per exisitng make suitable for street light fitting 90 watt complete all as specified and directed. Make - Wipro

S&F in repairs constant current LED driver as per exisitng make suitable for street light fitting 72 watt complete all as specified and directed. Make - Havells

S&F in repairs constant current LED driver as per exisitng make suitable for street light fitting 90 watt complete all as specified and directed. Make - Havells

S&F in repairs constant current LED driver as per exisitng make suitable for street light fitting 72 watt complete all as specified and directed. Make -Halonix

S&F in repairs constant current LED driver as per exisitng make suitable for street light fitting 90 watt complete all as specified and directed. Make -Halonix

S&F in repairs LED panel as per exisitng make suitable for street light fitting 72/90 watt complete all as specified and directed. Make -Havells

S&F in repairs LED panel as per exisitng make suitable for street light fitting 72/90 watt complete all as specified and directed. Make -Bajaj

S&F in repairs LED panel as per exisitng make suitable for street light fitting 90 watt complete all as specified and directed. Make -Wipro

S&F in repairs LED panel as per existing make suitable for flood light fitting 150 watt complete all as specified and directed. Make - Wipro

S&F in repairs LED panel as per exisitng make suitable for flood light fitting 200/240 watt complete all as specified and directed. Make - Bajaj

S&F in replacement of high power LEDs exlusive innovative die cast aluminium IP-66 flood light with high power LED 150 watt with 10 KA SPD & sealed driver complete all as specified and directed. Make:- Havells JETA IRIS Cat Part No JETAIRISFLS150WLED757PSYMLTG/ Wipro Cat Part No LF20-192-060-57-G2/CG cat part No LFLN-150-CDL/60/Halonix Cat Part No HLFLD-ML15-150-CWL-R

S&F in replacement of high power LEDs exlusive innovative die cast aluminium IP-66 flood light with high power LED 200 watt with 10 KA SPD & sealed driver including fitting items required at site complete all as specified and directed. Make:- Havells JETA VALOUR INTEGRAL Cat Part No JETAVALOURFL200WLED757LTG/ Wipro cat part No LF20-272-060-57-G2/CG cat part No LSFO-200-CDL/60/Halonix Cat Part No HLFLD-ML15-200-CWL-R

S&F 90 Watts LED Street Light fixture with IP-66 protected die-cast aluminium housing and heat resistive toughened glass. LED shall be having LM-79 and LM-80 complied as per L-70 standard. LEDs should be tested for minimum 10,000 burning hours with 5700-6000 K CCT. Maximum power consumption shall not exceed 90W and system lumens shall not be less than 9,000. Optics shall be properly designed with Polycarbonate Lenses to avoid dark patches on the road. Street light without lenses will not be acceptable. Driver shall be 3 stage "Constant Current Constant Voltage" with voltage range of 150-270V AC. Output voltage of driver should be complied to Safety Extra Low Voltage norms not exceeding 60 V DC. Note: (i) The item rate shall deem to include provision of weather proof PVC insulated aluminium conductor cable 2.5 Sqmm, 2/3 core as required. (ii) LEDs used in the product shall comply with EN-62471 for photo - biological safety and certificate for the same from manufacturer shall be provided. Luminaire manufacturer shall produce certificate of association with LED manufacturer for minimum two years. Make of LED light fitting : Havells Cat part No ENDURAPEARLPLUSL90WLED757PASYTOPCASTHO (90 Watt LED, 5700 K )/ Wipro Cat Part No LR02-102-XXX-57-G2/CG Cat Part No LSTN-90-CDL-A/Halonix Cat Part No HLSLD-15-90-CWL-R

S&F 60 Watts LED Street Light fixture with IP-66 protected die-cast aluminium housing and heat resistive toughened glass. LED shall be having LM-79 and LM-80 complied as per L-70 standard. Maximum power consumption shall not exceed 60W and system lumens shall not be less than 9,000. Optics shall be properly designed with Polycarbonate Lenses to avoid dark patches on the road. Street light without lenses will not be acceptable. Driver shall be 3 stage "Constant Current Constant Voltage" with voltage range of 150-270V AC. Output voltage of driver should be complied to Safety Extra Low Voltage norms not exceeding 60 V DC. Note: (i) The item rate shall deem to include provision of weather proof PVC insulated aluminium conductor cable 2.5 Sqmm, 2/3 core as required. (ii) Contractor shall produce warrinty certificate of association with LED manufacturer for minimum two years. Make :Havells Cat part No ENDURAPEARLNEOSL60WLED757PASYTOPCASTHO (60 Watt LED, 5700 K )/ Wipro Cat Part No LR02-671-XXX-57-G2/ CG Cat Part No LSTP-60-CDL/ Halonix Cat Part No HLSLD-15-60-CWL-R

S&F time switches for street lights control for 3 KW Single Phase rating consists of the following items:- (a) Nature switch - 01 No. (b) contactor MCB 16 Amp 2 pole - 01 No (c) Incoming MCB of 32 Amps - 01 No (d) Outgoing MCB of 25 Amps - 01 No (e) complete single phase circuit wiring

S&F in repairs junction box triple pole and neutral enclosure compression gland 2 with connector and clamp for pole mounting with two nos of nut bolt and washers and socket complete of size 12"x10"x4" complete all as specified and directed. Make - Sintex/Hansal

S&F in repairs box Single Pole and neutral enclosure compression gland 2 with connector and clamp for pole mounting with two nos of nut bolt and washers and socket complete of size 12"x10"x4" complete all as specified and directed. Make - Sintex/Hansal

S&F in repairs pipe galvanised iron light grade 25 mm dia ( ISI marked )with all fittings laid in trenches or on pole, crossing of road, fixed on wall for protection of cables complete all as specified and directed

S&F in repairs timer analog time watch FM/1 quartz 16A 250AC suitable for high mast panel complete all as specified and directed. Make - L&T or equivalent make as approved by GE

S&F in repairs auxiliary contactor MNX-A2 415V 10A suitable for high mast panel complete all as specified and directed. Make - L&T or equivalent make as approved by GE

S&F in repairs lower raising push botton no NC auxiliary contactor MNX-A2 415V 10A suitable for high mast panel complete all as specified and directed. Make - L&T or equivalent make as approved by GE

S&F in repairs connector suitable for high mast panel complete all as specified and directed. Make - L&T or equivalent make as approved by GE

S&F in repairs flate cable flexible copper of size 6 sqmm 3 core, 1100 volt grading complete all as specified and directed

S&F in repairs of chain pully motor & greasing chain pully of high mast light complete all as specified and directed

S&F in replacement post top energy saving, environment friendly long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LED as light source complete all as specified and directed Make: Havells Cat Part No CORALPT35WLED757PSYMTOPC or equivalent in Bajaj/CG

S&F in repairs PHOTON ULTRA PL-L 18W with very high efficacy suited for installation in existing lamp holder complete all as specified and directed. Make : Havells Cat Part No PHOTONULTRAPLL419TL18WLED865SPC or equivalent /Bajaj/Wipro

M&L for cutting of vegetation surrounding transformer, two poles, four pole structure and panels at various sub station / E&M installation and remove to a distance not exc 50 mtr complete all as specified and directed.

S&F in replacement MCB single pole and neutral 40 to 63 Amp 240 Volts 'C' series 10 KA. complete all as specified and directed. Make - Legrand /ABB/C&S

S&F in replacement MCB SP 6 to 40 Amps, 240V 'C' Series 10 KA complete all as specified and directed. Make - Legrand /L&T/C&S

Veer Brothers

shivansh traders

M/s VIKAS TRADERS