Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.4 CrAdmitted-Finance | ₹2.4 Cr | L1 | Admitted-Finance |
| 2 | L2₹2.5 Cr+₹5.4 L (2.21%)Admitted-Finance | ₹2.5 Cr+₹5.4 L (2.21%) | L2 | Admitted-Finance |
| 3 | L3₹2.5 Cr+₹8.5 L (3.48%)Admitted-Finance ASSAM RIFLES BAZAR NON CSD CANTEEN HAPPY VALLEY SHILLONG SHILLONG MEGHALAYA 793007 UDYAM ML 04 0000191 17AAJHS0378E3ZZ B R | EAST KHASI HILLS | MEGHALAYA | 793007 | ₹2.5 Cr+₹8.5 L (3.48%) | L3 | Admitted-Finance |
| 4 | L4₹2.6 Cr+₹12.9 L (5.27%)Admitted-Finance | ₹2.6 Cr+₹12.9 L (5.27%) | L4 | Admitted-Finance |
| Sl No | Description | Qty | Unit | Shree Meghalaya Construction & Supply Co. L3 | M/s K B Enterprises L1 | MEGHALAYA CONSTRUCTION AND SUPPLY CO. L2 | Aien Meren Enterprises L4 |
|---|---|---|---|---|---|---|---|
| 1.01 | Design, Supply, Installation, Testing and Commssioning of Air Conditioning Plant including all connected works
(i) Design based on bldg drgs, supply, installation and commissioning of approximate capacity 1 x 100 TR (Running) and 1 x 50 TR (Standby) water cooled, sccroll chilling machines fitted with hermetically sealed scroll compressors, multi/ single circuit chiller, water cooled shell & Tube type condensers, microprocessor based control panel, suitable for R-407 C/R 410 a refrigerant, shell & tube insulated evaporator, expansion device, control mechanism with control cables of approprite rating and length for interconnecting chiller unit unit control panel, AHU and Electric control panel suitable capacity for actual cooling capacity on following operation parameters complete as per specification :- Inside temperature : 23 + 3 degree C, Relative humidity : 50% + 5%, Chilled water entering temperature : 12.17 deg C, Chilled water leaving temperature : 6.67 deg C, Evaporator fouling factor : 0.0001 MKS, Condenser water entering/ leaving temperature at 36.2/ 32.4 deg C, Refrigerant : R-407 C/R 410 A, Maximum allowable KW/TR @ 100% load : 1.55, Special Conditions :-Bidders to submit computerised selection sheet showing the unloading pattern of chiller from 100% to 125% of full load capacity of 43 deg C ambient temperature. Note :- The following works are deemed to be included in the unit rate quoted. (a) All works which are required to achieve desired inside conditioning the cost of all items deemed to be included in the work. (b) Civil work such as provision of new foundation in PCC 1:3:6 C-1 type for chiller unit, cooling tower, Motors, Excavation, Returning filling, Removal sand cushioning, bricks protection for cable laying outside the AC plants etc - Qty as required. (c) Rubber expansion joints of suitable sizes. (d) All the miscellaneous items required for satisfactory completion of work such as flexible canvas connection at unit, small control valves as directed and as per standard engineering practice. (e) The contractor has to visit the site and submit the details of plants or any other comments/ changes to the specifications mentioned above to achieve the above design conditions before bid submission. The cost is deemed to be included in the quoted rate. (f) The contractor shall submit the detailed drawing for duct layout with sizes, piping, layout etc and equipment details for approval before placing any order to the manufacturer. (g) All other makes which are not mentioned in tender shall be ISI marked. (h) After the work of plant is over, if any fault and maintenance is required, then the contractor complted it in 48 hrs without any cost. If work does not work in 48 hrs then every day 2000.00 Rs will be penality. Note :- (i) Details of items/ tounage of AC Plant as given above are only indicative/ tentative, vender shall ensure proper Design of AC Plant duty approved by IIT/NIT as per latest engg. Practice based on building drawings (showing air conditioned space) and include all accessories essentially required. (ii) Design of AC Plant with complete heat load calculation/ ducting/ AHU/ other details duly approved by IIT/NIT shall be submitted for approval of Accepting Officer not later than one month of acceptance of contract.(iii) Capacity of AC Plant may vary as per actual design. | 1 | Each Job | 1,42,00,000 ₹1,42,00,000 Lowest | 1,52,00,000 ₹1,52,00,000 | 1,45,00,000 ₹1,45,00,000 | 1,75,00,000 ₹1,75,00,000 |
| 1.02 | Supply and install HT 11 KV 3 phase 50 Hz totally enclosed metal clad gear complete with vaccume circuit breaker having rupturing capacity 250 MVA, over load and earth fault protection, ammeter, voltmeter and of rating 400 Amps (placed in in living 11 kv sub stn) Make : VCB. | 1 | Each Job | 8,75,000 ₹8,75,000 | 7,00,000 ₹7,00,000 | 9,00,000 ₹9,00,000 | 5,00,000 ₹5,00,000 Lowest |
| 1.03 | Supply, laying and testing of HTcable XLPE insulated , screened, PVC bedded, galvanised steel strip or wire armored , electric power cable (Heavy duty) with stranded aluminium conductor, 11000 volts grade , of size 3 core 120 sqmm size (rate of under ground cable includes earth work, sand cushioning, brick or HT PCC/RCC cable covering, light grade GI tubing where necessary, testing and HT cable route indicator duly painted, oval shap of size 200x150x60 mm cast iron with letter embosed and foxed on 25x25x5 mm thick MS angle 500 mm long embedded with and including PCC 1:3:6 complete etc all as per site requirement.) | 510 | RM | 15,30,000 ₹15,30,000 | 10,71,000 ₹10,71,000 Lowest | 12,75,000 ₹12,75,000 | 15,30,000 ₹15,30,000 |
| 1.04 | Supply and fixing cable jointing kit 11KV grade cable for straight through cold shrink type joint complete with jointing materials and accessories suitable for 3 core XLPE armoured all conductor cable of size 120 sqmm. | 4 | Each | 1,00,000 ₹1,00,000 | 60,000 ₹60,000 | 80,000 ₹80,000 | 20,000 ₹20,000 Lowest |
| 1.05 | Supply and fixing cable jointing kit 11KV grade cable for indoor termination cold shrink type complete with jointing material and accessories suitable for 3 core XLPE armoured all conductor cable of size 120 sqmm. | 3 | Each | 60,000 ₹60,000 | 37,500 ₹37,500 | 52,500 ₹52,500 | 13,500 ₹13,500 Lowest |
| 1.06 | Supply , installation, testing and commissioning of step down power transformer, outdoor type floor mounted on iron wheels HT 11 KV, LT 3 phase 433 volts, 4 wire, 50 Hz Delta star connected vector group DYN- double copper wound, ONAN, mannual type offload tap changing facility on HT side to vary secondary voltage of +7.5 % in steps of 2.5 % of continuous rating of capacity 200 KVA including cable terminal on HT and LT side. The transformer shall confirming to IS-2026, having percentage of impendence not less than 4.75% complete with all standard fittings and accessories like (a) Oil conservator with filter type drain value and oil level indicator, (b) Dehydrating breather with fast fill of dehydrating agent, (c) Explosion vents, (d) Thermometer pocket on tank cover including thermometer, (e) Rating plate and terminal marking plate, (f) The earthing terminal two numbers on body to faciliate fixing of earth strip, guages, (g) First filling of transformer oil, Oil level gauge, (h) The cooling shall be oil natural Air Natural type (ONAN) (j) M&L of brick masonary platform of size (3.0 x 3.0 x 1.5)mtr in CM 1:5 with PCC foundation using 1:4:8 type D2, plastering). etc complete all as specified and directed. Make : Crompton/ Mahindra/Servotek/ Kanpur engg works/ ALSTOM. Note : (i) Pre-dispatch factory inspection shall be carried out by rep of Accepting Officer and expenditure for the same shall be deemed to be included in the quoted rates. | 1 | Each Job | 18,00,000 ₹18,00,000 | 13,00,000 ₹13,00,000 Lowest | 15,00,000 ₹15,00,000 | 15,00,000 ₹15,00,000 |
| 1.07 | Supply, install, test and commissioning of APFC panel with MD-XL Heavy Duty capacitor bank of 150 KVAR, feeder pillar, (IP-55) suitable for outdoor installation (with canopy) consisting of 12.5/15/20/25/50 KVAR capacitor unit in tier formation housed in integrated cubical type automatic switching "ON" & "OFF" control panel fabricated out of CRCA steel sheet of minimum thickness 3.15 mm with dust and vermin proof hinged and lockable door complete with interconnection, bonding to earth and panel shall be powder coated (suitable for 400/ 440 volts, 3 phase 50 Hz supply system) automatic switching with microprocessor based APFC relay "ON" & "OFF" control panel for 150 KVAR capacitor each panel consist of following :- Complete all as specified and as directed.
INCOMING:- (a) 01 No 200 Amp TP MCCB, 25 kA rupturing capacity microprocessor based (Ics =100%)
INDICATING PANEL:- (a) phase ammeter with required CTs (b) Phase indicating lamps each backed up with 2 amp MCB (c) Indicating lamp of each 2.5/15/20/25/50 KVAR capacitor unit to indicate that unit is "ON" & "OFF" (d) 200/5 ratio of accuracy class 1.0 with the panel to mount in the main feeder pillar. (e) Microprocessor based stepped relay with 10 steps
OUTGOING: (a) 09 Nos of MD-XL capacitors duty power contactors of suitable ratings (b) 07 Nos 20 A TP MCB, C Curve of 10 kA rapturing capacity (d) (2x12.5,3x25,1x50) KVAR MD-XL type capacitor banks (e) 02 Nos 63 A TP MCB, C Curve of 10 kA rapturing capacity (f) Slector switches for changing automatic to manual operation of capacitor Bank
Note : (i) Pre-dispatch factory inspection shall be carried out by rep of Accepting Officer and expenditure for the same shall be deemed to be included in the quoted rates.
(ii) Total Harmonics Distortion level shall be mentioned on capacitor. | 1 | Each Job | 8,00,000 ₹8,00,000 | 5,25,000 ₹5,25,000 | 8,25,000 ₹8,25,000 | 3,00,000 ₹3,00,000 Lowest |
| 1.08 | Supply, install, testing and commissioning of 160 KVA Diesel Engine driven generating set with acoustic enclosure made out of CRCA Sheet powder coated, specially designed lifting arrangement/hooks, meet the latest CPCB, norms of 75 dBA from 1 mtr distance and as per the testing guide line of CPCB, DG Set shall be conforming to IS:10001/10002 and alternator as per IS: 13364, coolant cooled type, self starting system with 12 volt DC Supply, 3 phase 4 wire AC 415 volt + 5% at 1500 RPM, 50 Hz, 0.8 PF self exiled, self regulated, Automatic voltage regulation, class 'H' insulation type alternator installed on PCC foundation platform with and including following accessories:- The following accessories shall be confirmed:-
(a) Coupling arrangements (b) Mounting arrangements with ISMC fabricated frame on anti vibrating pad. (c) Fuel tank with base frame suitable for not less 8 hrs Running Capacity on full load, Inlet & Outlet arrangement with air vent, level indicator, drain plug arrangement and provision for cleaning. (d) Battery maintenence free dry cell battery 12 Volt 180 AH of approved make
(e) Water Pump (f) Radiator with fan (g) Silencer muffler as per approved norms of CPCB / MoEF (h) LT Panel electronic modular type for DG Set floor mounted cubical, 2mm thick, powder coated finish indoor type with the following arrangements :
(j) Indicating lamp LED type for "Load on" & "Set Running"- 01 Set (k) Ammeter with selector switch digital type suitable to read current in each phase (l) Voltmeter with selector switch, digital type suitable to read Phase Voltage, and line voltage (multi function) all as specified. (m) Hours Run meter digital type to read cumulative and present running Hrs. (n) RPM indicator digital type - 1 No (o) Frequency meter digital type - 1 No. (p) Earthing terminals - 2 Nos. (q) Digital Manual and AMF control panel : Digital Manual is euiped with 16 bit high speed RISC processor based controller. It displays the following parameters Safety system with special sensors to safe guard the engine against faults, like low lub oil pressure, high coolant temperature, battery over/under/weak volt, fail to crank/start, sensor failure, over speed, low fuel level etc with alarm. (r) AC Alternator protection Over/Under Voltage, Over/Under Frequency. (s) 'Preset' system with push button. (t) DC Voltmeter - 1 No.
(u) Mechanical governor. (v) Reverse power relay & reverse reactive power relays. (w) Neutral switching facility. (x) SMPS suitable for charging, 12 volt battery with trickle and boost facility - 01 No. (y) Independent earthing terminals for engine & alternator - 2 each (z) Battery charging alternator 12 volt. (aa) M & L for making PCC foundation (1:3:6) type C1 including form work of size 4 x 2 x 2 Mtr height along with necessary earthwork and excavation in any type of soil, brick work in CM(1:4), 15 mm thick rendering in CM (1:6) surface even and smooth. Flooring PCC (1:3:6), type B1 using 20 mm graded stone aggregate , 100 mm thick over 150 mm thick hard core over rammed earth for 100 KVA DG Set complete all as specified and as directed. (ab) Height of PCC foundation of DG set should be above FFL of proposed SM barrack. Note:- Height of platform shall be decided by the GE as per site requirment. | 1 | Each Job | 30,00,000 ₹30,00,000 | 35,25,000 ₹35,25,000 | 28,75,000 ₹28,75,000 | 25,00,000 ₹25,00,000 Lowest |
| 1.09 | Supply and fix LT panel board totally enclosed floor mounted outdoor type weather and vermine proof made out of MS sheet 2mm thick duly painted with 3.15 coats of enamel paint over a coat of red oxide primer consisting of the following items :(a) TPN bus bar 600 Amps. -01 set, (b) MCCB 4 pole 250 Amps , 50 Hz, 415 volts with rupturing cap 35 KA. For incoming.- 01 Nos, (c) MCCB 4 pole 160 Amps 50 Hz 415 volts with rupturing cap 25 KA- 01 Nos (for AC plant), (d) MCCB 3 pole 63 Amps 50 Hz 415 volts with rupturing cap 25 KA- 01 No (APFC panel), (e) MCCB 4 pole 63 Amps 50 Hz 415 volts with rupturing cap 25 KA- 02 Nos (for bldgs), (f) MCCB 4 pole 32 Amps 50 Hz 415 volts with rupturing cap 25 KA- 02 Nos (for dehumidifier Room1 & Room2), (g) Ammeter 0-300Amps with selector switch and CT's- 01 No, (h) Voltmeter 0-500 volts with selector switches & with RYB. - 01 No, (j) Indicator LED type .- 01 Set. | 2 | Each Job | 6,80,000 ₹6,80,000 | 4,00,000 ₹4,00,000 | 7,50,000 ₹7,50,000 | 3,00,000 ₹3,00,000 Lowest |
| 1.10 | Supply & lay cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured , electrical power cable(heavy duty) 1100 volts grade with stranded aluminium conductor of size 240 Sqmm 3½ core (rate of under ground cable includes earth work, sand cushioning, brick or HT PCC/RCC cable covering, light grade GI tubing where necessary, testing and HT cable route indicator duly painted, oval shap of size 200x150x60 mm cast iron with letter embosed and foxed on 25x25x5 mm thick MS angle 500 mm long embedded with and including PCC 1:3:6 complete etc all as per site requirement.) (from Transformer to AMF panel & AMF panel to LT panel) | 200 | RM | 7,00,000 ₹7,00,000 | 5,20,000 ₹5,20,000 | 6,40,000 ₹6,40,000 | 5,00,000 ₹5,00,000 Lowest |
Tender Value
₹2.4 Cr
EMD Value
₹4.7 L
Closing Date
23 Jun 2025, 9:00 amClosed
DG Assam Rifles
HQ DGAR, Lasitkor Shillong
Provn of central AC plant including external elect services at 50 bedded hospital at ARCH, Shokhuvi Nagaland
2025_ARMHA_862935_1
110148981ARTCSENGROB202523
Open Tender
Civil Works
Works
365 days
Shokhuvi
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,500
Director General Assam Rifles
₹4.7 L
15 Jul 2025
3 Jun 2025
24 Jun 2025
3 Jun 2025
23 Jun 2025
3 Jun 2025
3 Jun 2025 - 20 Jun 2025
Supply and install HT 11 KV 3 phase 50 Hz totally enclosed metal clad gear complete with vaccume circuit breaker having rupturing capacity 250 MVA, over load and earth fault protection, ammeter, voltmeter and of rating 400 Amps (placed in in living 11 kv sub stn) Make : VCB.
Supply, laying and testing of HTcable XLPE insulated , screened, PVC bedded, galvanised steel strip or wire armored , electric power cable (Heavy duty) with stranded aluminium conductor, 11000 volts grade , of size 3 core 120 sqmm size (rate of under ground cable includes earth work, sand cushioning, brick or HT PCC/RCC cable covering, light grade GI tubing where necessary, testing and HT cable route indicator duly painted, oval shap of size 200x150x60 mm cast iron with letter embosed and foxed on 25x25x5 mm thick MS angle 500 mm long embedded with and including PCC 1:3:6 complete etc all as per site requirement.)
Supply and fixing cable jointing kit 11KV grade cable for straight through cold shrink type joint complete with jointing materials and accessories suitable for 3 core XLPE armoured all conductor cable of size 120 sqmm.
Supply and fixing cable jointing kit 11KV grade cable for indoor termination cold shrink type complete with jointing material and accessories suitable for 3 core XLPE armoured all conductor cable of size 120 sqmm.
Supply , installation, testing and commissioning of step down power transformer, outdoor type floor mounted on iron wheels HT 11 KV, LT 3 phase 433 volts, 4 wire, 50 Hz Delta star connected vector group DYN- double copper wound, ONAN, mannual type offload tap changing facility on HT side to vary secondary voltage of +7.5 % in steps of 2.5 % of continuous rating of capacity 200 KVA including cable terminal on HT and LT side. The transformer shall confirming to IS-2026, having percentage of impendence not less than 4.75% complete with all standard fittings and accessories like (a) Oil conservator with filter type drain value and oil level indicator, (b) Dehydrating breather with fast fill of dehydrating agent, (c) Explosion vents, (d) Thermometer pocket on tank cover including thermometer, (e) Rating plate and terminal marking plate, (f) The earthing terminal two numbers on body to faciliate fixing of earth strip, guages, (g) First filling of transformer oil, Oil level gauge, (h) The cooling shall be oil natural Air Natural type (ONAN) (j) M&L of brick masonary platform of size (3.0 x 3.0 x 1.5)mtr in CM 1:5 with PCC foundation using 1:4:8 type D2, plastering). etc complete all as specified and directed. Make : Crompton/ Mahindra/Servotek/ Kanpur engg works/ ALSTOM. Note : (i) Pre-dispatch factory inspection shall be carried out by rep of Accepting Officer and expenditure for the same shall be deemed to be included in the quoted rates.
Supply, install, test and commissioning of APFC panel with MD-XL Heavy Duty capacitor bank of 150 KVAR, feeder pillar, (IP-55) suitable for outdoor installation (with canopy) consisting of 12.5/15/20/25/50 KVAR capacitor unit in tier formation housed in integrated cubical type automatic switching "ON" & "OFF" control panel fabricated out of CRCA steel sheet of minimum thickness 3.15 mm with dust and vermin proof hinged and lockable door complete with interconnection, bonding to earth and panel shall be powder coated (suitable for 400/ 440 volts, 3 phase 50 Hz supply system) automatic switching with microprocessor based APFC relay "ON" & "OFF" control panel for 150 KVAR capacitor each panel consist of following :- Complete all as specified and as directed. INCOMING:- (a) 01 No 200 Amp TP MCCB, 25 kA rupturing capacity microprocessor based (Ics =100%) INDICATING PANEL:- (a) phase ammeter with required CTs (b) Phase indicating lamps each backed up with 2 amp MCB (c) Indicating lamp of each 2.5/15/20/25/50 KVAR capacitor unit to indicate that unit is "ON" & "OFF" (d) 200/5 ratio of accuracy class 1.0 with the panel to mount in the main feeder pillar. (e) Microprocessor based stepped relay with 10 steps OUTGOING: (a) 09 Nos of MD-XL capacitors duty power contactors of suitable ratings (b) 07 Nos 20 A TP MCB, C Curve of 10 kA rapturing capacity (d) (2x12.5,3x25,1x50) KVAR MD-XL type capacitor banks (e) 02 Nos 63 A TP MCB, C Curve of 10 kA rapturing capacity (f) Slector switches for changing automatic to manual operation of capacitor Bank Note : (i) Pre-dispatch factory inspection shall be carried out by rep of Accepting Officer and expenditure for the same shall be deemed to be included in the quoted rates. (ii) Total Harmonics Distortion level shall be mentioned on capacitor.
Supply & lay cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured , electrical power cable(heavy duty) 1100 volts grade with stranded aluminium conductor of size 240 Sqmm 3½ core (rate of under ground cable includes earth work, sand cushioning, brick or HT PCC/RCC cable covering, light grade GI tubing where necessary, testing and HT cable route indicator duly painted, oval shap of size 200x150x60 mm cast iron with letter embosed and foxed on 25x25x5 mm thick MS angle 500 mm long embedded with and including PCC 1:3:6 complete etc all as per site requirement.) (from Transformer to AMF panel & AMF panel to LT panel)
Supply & lay cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured , electrical power cable(heavy duty) 1100 volts grade with stranded aluminium conductor of size 95 Sqmm 3½ core (rate of under ground cable includes earth work, sand cushioning, brick or HT PCC/RCC cable covering, light grade GI tubing where necessary, testing and HT cable route indicator duly painted, oval shap of size 200x150x60 mm cast iron with letter embosed and foxed on 25x25x5 mm thick MS angle 500 mm long embedded with and including PCC 1:3:6 complete etc all as per site requirement.) (from LT Pannel & AC plant Room)
Supply & lay cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured , electrical power cable(heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 Sqmm 3½ core (rate of under ground cable includes earth work, sand cushioning, brick or HT PCC/RCC cable covering, light grade GI tubing where necessary, testing and HT cable route indicator duly painted, oval shap of size 200x150x60 mm cast iron with letter embosed and foxed on 25x25x5 mm thick MS angle 500 mm long embedded with and including PCC 1:3:6 complete etc all as per site requirement.) (from LT PANEL to Bldg DB).
Supply & lay cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured , electrical power cable(heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 Sqmm 4 core (rate of under ground cable includes earth work, sand cushioning, brick or HT PCC/RCC cable covering, light grade GI tubing where necessary, testing and HT cable route indicator duly painted, oval shap of size 200x150x60 mm cast iron with letter embosed and foxed on 25x25x5 mm thick MS angle 500 mm long embedded with and including PCC 1:3:6 complete etc all as per site requirement.) (from LT Pannel to DH room1 & DH room 2).
Supply and elect 4 pole structure on 11 mtr steel tubular poles consisting of anti climbing device, PCC foundation and cross arms etc.
M&L Earthing complete with galvanised steel earth plate electrode 60x60cmx6.3mm thick burried directly in ground( earth pit not les than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earth test point all as specified or indicated including testing on completion.
Supplying, installing connecting and testing of 11 KV 200 Amps triple pole gang operated air breack switch having 12 Numbers post insulator with earthing switch rotating type for horizential/ vertical operation mechanically operated 3 rows type mounted on Polymer type insulator (including insulators) and steel frame with operating mechanism consisting of operating rod of 25 mm bore medium grade galvanised iron pipe of suitable length to operated from ground level including locking arrangment with pad lock of godrej) make with three Numbers of keys including 11 KV swing out expulsion fuses (drop out type) of 25 Amps. Complete all as specified and as directed.
Material and labour for lightning arrestor expulsion type complete with all fittings, transmission class 11000 volts grade, discharge capacity 65 KA. Complete all as specified and as directed.
M&LDanger notice plate 1.6mm thick mild steel sheet, vitrous enamelled white with letters, figures and conventional skull and bones in signal red and fixed with MS clamps, bolts and nuts of approved size for LT 20x15cm size.
M&L Danger notice plate 1.6mm thick mild steel sheet, vitrous enamelled white with letters, figures and conventional skull and bones in signal red and fixed with MS clamps, bolts and nuts of approved size for HT 25x20cm size.
S&F cable route indicator made of 15x15x6mmthick MS plate welded with 8mmx30cm long MS rod grouted in PCC block of size .2x.2x.3m and writing HT cable complete all as directed.
S&F cable route indicator made of 15x15x6mmthick MS plate welded with 8mmx30cm long MS rod grouted in PCC block of size .2x.2x.3m and writing LT cable complete all as directed.
M&L GI pipe light grade 80mm dia for cable protection fixing on wall,roof, trenches.
M&L GI pipe light grade 50mm dia for cable protection fixing on wall,roof, trenches.
MEGHALAYA CONSTRUCTION AND SUPPLY CO. (BID ID -3236532)
Shree Meghalaya Construction & Supply Co. (BID ID -3235869)
Aien Meren Enterprises (BID ID -3235828)
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.45 MB
BOQ_907274.xls
BOQ • 0.51 MB
Tenderdocus.pdf
Tender Documents • 1.87 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .