Loading
Loading…
Loading…
Tender Value
₹3.3 Cr
EMD Value
₹6.6 L
Closing Date
5 Oct 2026, 3:30 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
BRIDGE
14 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N crores or V, whichever is lower; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of total contractual payments in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Similar Nature of work for this tender is "Any Civil Engineering work consisting of fabrication / erection / launching of Steel Girder or Steel FOB (3m wide & above under running rail traffic) or Work of workshop involving Steel gantry bay / Overhead Crane".
30 conditions · 2 needing a document upload
Documents to be uploaded only in the website by the Tenderer Following Annexure duly filled and signed are to be uploaded online only prior to Closing of Tender. Original copy of all the documents to be submitted to office within 7 days whenever demanded by the Railway. Otherwise, Railway reserves rights to Reject/Accept such tender/offer without any reference to the tenderer/ tenderers. Annexure are available at Upload/View Document menu in Home Page of IREPS portal for works tender. Annexure Description 1. Annexure-I(a) Details of the Works Completed by the tenderer during the last seven years to be filled & submitted as per Annexure-I(a). 2. Annexure-I(b) Details of contractual payment received by the Tenderer during the last 3 (three) financial years including the current financial year to be filled & submitted in Annexure-I(b).3 Annexure-II Details of Plants and Machinery with the tenderer to be filled & submitted as per Annexure- II. 4. Annexure-III Details of Personnel and Organization of the Tenderer to be filled & submitted as per Annexure-III. 5. Annexure-IV Details of Works Presently on hand of the Tenderer to be filled & submitted as per Annexure- IV. 6. Annexure-V Details regarding Association of Railway Officer(s) with the tenderer to be filled & submitted as per Annexure- V. 7. Annexure-VI List of the Arbitration Cases of the Tenderer during last five years to be filled & submitted as per Annexure-VI. 8. Annexure-VII List of the Court Cases of the Tenderer during last Five years to be filled & submitted in Annexure- VII. 9. Annexure- VIII NEFT MANDATE FORM. All Payments to the agency (including the refund of the Bid Security of the unsuccessful bidder preferably) will be remitted through NEFT. The Tenderer is required to submit Bank details and A/C No. etc. in Annexure- VIII. 10. Annexure-IX GST COMPLAINT INVOICE: To be filled & submitted as per Annexure-IX. 11. Annexure V (A) by each partners of Partnership Firm/ JV/ HUF/ LLP; FORMAT FOR CERTIFICATE TO BE SUBMITTED / UPLOADED BY TENDERER ALONGWITH THE TENDER DOCUMENTS as per Annexure-V (A) of GCC-2022 12. Annexure-XI LETTER OF CREDIT: To be filled & submitted as per Annexure-XI. 13. Annexure-VIA BID SECURITY: Bank Guarantee Bond from any scheduled commercial bank of India to be filled & submitted as per Annexure-VIA. 14. Annexure-VIB Annual Contractual Turnover Data for the Previous 3/4 Years (Contractual Payment only) to be filled & submitted as per Annexure-VIA. 15. Submission of Form VA properly. 16. Annexure-VI of GCC- 2022: TENDERER'S CREDENTIALS (BID CAPACITY) to be submitted as per Annexure-VI of GCC-2022 and Serial No. 05 of Advance Correction Slip No. 11 of IRSGCC 2022. (This annexure will be applicable, if tenders having advertised value more than Rs 10 crore wherein eligibility criteria includes bid capacity).
Demand for the Financial Criteria, Association of Railway Officers, List of Arbitration cases, Court cases and Mandate for NEFT are to be uploaded with a scanned copy duly filled in and signed as per annexure no. IV, V, VI, VII, VIII,IX,XI. Annexure-VI, VI A & VI B of GCC-2022 respectively. These Annexure are available in View Document menu at Home page and is downloadable. The details of the uploaded documents should be produced whenever demanded for verification on written request at any point of time of the tender and contract within 7 days Otherwise, Railway reserves rights to Reject/Accept such tender/offer without any reference to the tenderer/tenderers.
Demand for Mandate for NEFT is to be uploaded with a scanned copy duly filled in and signed as per annexure no. VIII. This Annexure is available in View Document menu at Home page and is downloadable.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Open e-tender for the work of Re-girdering of steel girder of major Bridge No.19 DN line of span (3x18.3)m at km 281/2-23, between stations Gour Malda - Jamirghata in the section Malda - New Farakka of Malda Division in the jurisdiction of Assistant Engineer/ BRL/ Eastern Railway/ Malda.
111-MLDT-26-27~ER
111-MLDT-26-27
Open
Works - General
12 Months
Maldah, West Bengal
₹0
₹6.6 L
10 Sept 2026
10 Sept 2026
21 Sept 2026
33 items across 2 schedules · ₹3,28,94,875.9 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply & fabrication of welded steel girder as per Railway approved drawing. The rate is inclusive of supply of steel section of IS: 2062 Gr. E250 BO or as specified in relevant RDSO Drawing with all other materials like rivets / bolts with nuts and washers (HSFG), cost of testing of the materials etc. and trial assembling of girder at workshop and thereafter final assembling at site before launching.. The fabrication work to be carried out as per BI-2001 and as per latest welded bridge code and to be done at any RDSO approved workshop or in a well equipped workshop duly approved by the competent authority. Necessary QAP & WPSS will be prepared by the contractor at his own cost & to be approved by RDSO before starting the fabrication work. The rate shall include the cost of painting with a thick coat of Zinc chromate primer confirm to IS: 104 at all the hidden portion prior to fixing the stiffeners & assembling of girders. The rate shall also include the cost of loading of the girders at work shop, transporting by trailer to the approachable location nearest to the site feasible for loading on BFR as decided by the Engineer in- charge and unicading the same from trailor and placing them without any infringement to the running track with all lead, lift etc. as decided by the Engineer in-charge complete in all respects. | MT | 105.00 | 1,41,719 | 1,48,80,495 |
| 2 | Dismantling of existing girder under traffic block/Non-traffic block as per approved scheme. The rate includes cost of all tools & Tackles staging including their erection and dismantling etc. The rate shall also include the cost of depositing for loose dismantled members if any to the JMP SCRAP YARD or to the store of SSE/BR/MLDT as instructed by the Engineer in-charge. | MT | 55.00 | 16,825 | 9,25,375 |
| 3 | Supply, fitting, fixing of 6mm/12mm thick commercial woolen felt complete in all respect. | Sqm | 2.50 | 2,207 | 5,517.5 |
| 4 | Dismantling of track structure from the old girder, stacking them properly and depositing the same to nearest P. Way store as directed by the site in charge. (Track metre should be read as Tr./Mtr) | Track metre | 150.00 | 351 | 52,650 |
| 5 | Linking of track including Guard rail over new girder as per relevant position in IRPM. (Track metre should be read as Tr./Mtr) | Track metre | 200.00 | 306 | 61,200 |
| 6 | Cutting of Rails 90R/52Kg/60Kg inside or outside of the track for provision gap in the rail section for erection purpose. The rate shall include all labours, tools & tackles etc. required to carry out the work complete in all respect. | Numbers | 60.00 | 70 | 4,200 |
| 7 | Drilling holes in 90R/52Kg/60Kg rail inside or outside of track for provision of fish bolt for erection purpose. The rate shall include all labours, tools & tackles etc. required to carry out the work complete in all respect. | Numbers | 322.00 | 69 | 22,218 |
| 8 | Lifting of track with contractor men, tools and trackles. (Track metre should be read as Tr./Mtr) a) 0 to 75mm | Track metre | 2000.00 | 46 | 92,000 |
| 9 | Lifting of track with contractor men, tools and trackles. (Track metre should be read as Tr./Mtr) b) 75mm to 150mm | Track metre | 1000.00 | 46 | 46,000 |
| 10 | Lifting of track with contractor men, tools and trackles. (Track metre should be read as Tr./Mtr) c) 150mm to 300mm | Track metre | 800.00 | 49 | 39,200 |
| 11 | Three round consolidation and packing of track before relaxation of speed. The rate includer rectification of long levels, cross level, alignment, gauging, squaring and spacing of sleepers etc. complete in all respect. | Per Sleeper | 1000.00 | 19 | 19,000 |
| 12 | Changing rail at 13m length or less in running track as per direction of site in charge. The payment shall be considered as on side of track only. | Metre | 150.00 | 50 | 7,500 |
| 13 | 13. Loading/unloading of steel girder/Slabs by mechanical means or other means arrangement by contractor on/from BFR at suitable location of Malda division. The rate shall include all labour tools and tackles etc. required to carry out the complete in all respect. | MT | 200.00 | 8,953 | 17,90,600 |
| 14 | Hiring charge of 5KV generator set including fuels, lubricating oils, operation and maintenance with lighting arrangement with 6Nos. 500 watt halogen 2Nos. Point fixing complete in all respect. | Hour | 40.00 | 517 | 20,680 |
| 15 | Assistance to crane working during day/night for removing of old girder or erection of new girder in traffic block by employing at least 16Nos. labours for 8hrs. Shift. Labour should be at site till completion of the traffic block. | Hour | 40.00 | 539 | 21,560 |
| 16 | Transporting of any type of new/SH or released P. Way/Bridge materials from Rly. Store to site or site to Rly. Store / JMP scrap yard including all lead, lift, crossing of track, loading and unloading etc. complete in all respect. | MT/Km | 15000.00 | 23 | 3,45,000 |
| 17 | Supply of unskilled labours. | Each | 1000.00 | 616 | 6,16,000 |
| 18 | Fabrication, manufacture, supply of galvanized H-beam steel sleepers made out of the materials as per the specifications given and as per the approved drawing and fixing on the nominated girder bridges with maximum clear spacing of 450mm as per the instruction of engineer-in-charge including supply, fixing galvanized, zero toe load fastening as per approved drawing, MS canted base plates, special liners, rail pad with embedded steel plate, elastic rail clips, elastomeric pads/rubber pads, hook bolts etc. including welding, riveting/drilling holes wherever necessary with all contractors labour, tools, plants, machinery, transportations to bridge site, lead, lift, loading and unloading, etc. complete and as directed by the Engineer in- c h a r g e . N o t e : i) ISHB-200 sleepers should be made of standard rolled section confirming to 15: 2062 Gr. E350 80 beams and MS plates confirming to 15: 2062 Gr. E250 80 fully killed and normalized.ii) Hot dip Galvanizing to be done as IS: 4759 after welding MS packing plates to H beam sleepers (As fabricated on item no. 2 of this schedule).iii) The elastomeric pads of steel sleepers shall be procured from RDSO approved sources only and shall be inspected by RDSO/RITES and used only after RDSO/RITES certification, the list of RDSO approved firms can be ascertained at the time of execution.iv) The fitting of H-beam steel sleepers shall be inspected by RDSO/RITES certification. Contractor will have to arranged for all inspection/testing at their own cost | Per Sleeper | 130.00 | 32,200 | 41,86,000 |
| 19 | Supplying & fixing of MS pad plate upto 25/50 mm thichness, including cutting to the required size and wellding to the H- beam sleeper as per RDSO drawing No. B-1636/5 with all contractors materials tools, plants, machinery, consumables complete including loading, unloading, transportation with all lead, lift, etc. and as directed by the engineer in charge. | MT | 4.50 | 1,62,040 | 7,29,180 |
| 20 | Erection/Launching of newly assembled girder and placement of the same on proper alignment line and level under traffic blocks as per approved scheme. The rate rate is inclusive of all all tools and plants required to carry out the work including chipping and cleaning of bed block if required. | MT | 105.00 | 22,961 | 24,10,905 |
| 21 | Trolleying of rail CC Cribs, sleeper etc. by dip lorry up to average distance of 2 km including all lead, lift crossing lines etc. | MT | 10.00 | 211 | 2,110 |
| 22 | Transporting of CC crib or any other heavy materials including loading and unloading of the materials with contractors men tools and plants etc. | MT | 5000.00 | 52 | 2,60,000 |
| 23 | Assemble/erection/placing of CC Cribs staging for Railway Crane propping fixing with the clamps, nut & bolts of convenient length and height at bed level of different locations of bridges wooden sleeper/wooden log is to be placed at top and bottom of CC Cribs staging to maintain level and line as per direction of site Engineer. The rate includes supply of labour, tool & plants etc. including all lead, lift, ascend descend crossing line etc. The staging should be removed after completion of work. | MT | 20.00 | 1,213 | 24,260 |
| Schedule total | ₹2,65,61,650.5 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
BidCapacity.pdf
ATTACHMENT
ModifiedTDofHQ-29.08.25.pdf
ATTACHMENT
GCC_April-2022_2022_CE-I_CT_GCC-2022_POLICY_27.04.22.pdf
ATTACHMENT
FormVA.pdf
ATTACHMENT
GCCAcs6.pdf
ATTACHMENT
FormV.pdf
ATTACHMENT
CheckList_2.pdf
ATTACHMENT
GCC2022ACS-3_20230426_114140.pdf
ATTACHMENT
GCCACS4.pdf
ATTACHMENT
Commercialcompliance.pdf
ATTACHMENT
TechnicalCompliance.pdf
ATTACHMENT
ACS-2toGCC-2022.pdf
ATTACHMENT
GCCACS5.pdf
ATTACHMENT
GCCACS.pdf
ATTACHMENT
FormVIB.pdf
ATTACHMENT
Tele_Cir_17-2013regardingcablecut.pdf
ATTACHMENT
GCCAcs7.pdf
ATTACHMENT
GCC-2022ACS9.pdf
ATTACHMENT
GCCACS10.pdf
ATTACHMENT
BGFormatforBidSecurity.pdf
ATTACHMENT
GCC-2022ACS11compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .