Repairs and painting / Polishing to OP works and MH furniture under GE (Army) Suratgarh at Suratgarth Mil Stn

Amount

Supply & fixing in repair wooden seat made out of Ist class hard wood (Teak) made to shape for Chair CBA steel with arms duly caned with 2 to 2.5 mm wide half round plastic cane except border which shall be 3mm thick flat plastic cane of approved quality as per Godrej pattern with & including fixing with machine screw 4mm dia and 75mm long with nuts and washers through holes in the wooden frame including painting with two coats of Synthetic enamel paint (Black colour) over one coat of pink primer on wooden surface and applying spray painting of two coats of synthetic enamel paint (OG colour) to tubular steel frame complete all as specified and directed by Engineer-in-Charge. Drg No. HFD-2045 Make of Cane :- Shah & Shah / M/S Premier / Indian Plastic

All as per serial item No 1 here-in-before but back

Supply and fixing in replacement Arm of chair CBA steel made out of Ist class hard wood (Shisham) made to shape and size as shown on drawings, fixing with MS screw of 50 mm size including two coats of synthetic enamel paint black colour over a coat of primer complete all as specified and directed by Engineer-in-Charge. Drg No. HFD-2045

Taking out carefully following old unserviceable parts of Almirah large steel and Supply & fixing new parts of size and shape as per drawing or as specified and directed :- Drg No HFD-2055 & TP (a) Chromium plated MS handle

(b) ‘G’ type clamp fixed with machine screws for refixing of shelves

(c) Locking device of brass bright finish, six lever with key in duplicate and fixed with new nut, bolt & making it fully functional in all respects.

(d) 3 way locking system made out of 10mm dia mild steel rod to almirah large steel

(e) Pedestal of Almirah large steel made out of 1.00 mm thick PBI sheet including painting with one coat of synthetic enamel paint (as per existing colour) over a coat of red oxide primer after preparation of steel surface.

(f) Shelves of Almirah large steel made out of 1.00 mm thick PBI sheet welded / rivetted with existing Almirah including painting with one coat of synthetic enamel paint (as per existing colour) over a coat of red oxide primer after preparation of steel.

(g) Hanging MS CP tube 20mm x 450mm

Taking out carefully following old unserviceable parts of Almirah medium steel and Supply & fixing new parts of size and shape as per drawing or as specified and directed :- Drg No HFD 2056 & TP (a) Chromium plated MS handle

(b) ‘G’ type clamp fixed with machine screws for refixing of shelves

(c) Locking device of brass bright finish, six lever with key in duplicate and fixed with new nut, bolt & making it fully functional in all respects.

(d) 3 way locking system made out of 10mm dia mild steel rod to almirah medium steel

(e) Pedestal of Almirah medium steel made out of 1.00 mm thick PBI sheet including painting with one coat of synthetic enamel paint (as per existing colour) over a coat of red oxide primer after preparation of steel surface.

(f) Shelves of Almirah medium steel made out of 1.00 mm thick PBI sheet welded / rivetted with existing Almirah including painting with one coat of synthetic enamel paint (as per existing colour) over a coat of red oxide primer after preparation of steel.

Taking out carefully following old unserviceable parts of Almirah medium steel with study table and Supply & fixing new parts of size and shape as per drawing or as specified and directed :- Drg No TP (a) Chromium plated MS handle

(b) ‘G’ type clamp fixed with machine screws for refixing of shelves

(c) Locking device of brass bright finish, six lever with key in duplicate and fixed with new nut, bolt & making it fully functional in all respects.

(d) 3 way locking system made out of 10mm dia mild steel rod to almirah medium steel

(e) 20mm dia Chromium plated steel pipe for hanger

(f) Aluminium anodized hasp & staple 125mm long

(g) Removing old unserviceable writing board of size 900 x 450mm and supply and fiixing of new writing board made of 18mm thick pre laminated particle board one side teak face.

(h) Pedestal of Almirah medium steel made out of 1.00 mm thick PBI sheet including painting with one coat of synthetic enamel paint (as per existing colour) over a coat of red oxide primer after preparation of steel surface.

(j) Shelves of Almirah medium steel made out of 1.00 mm thick PBI sheet welded / rivetted with existing Almirah including painting with one coat of synthetic enamel paint (as per existing colour) over a coat of red oxide primer after preparation of steel.

Taking out carefully following old unserviceable parts of bed side Locker steel and Supply & fixing new parts of size and shape as per drawing or as specified and directed :- Drg No TP (a) Chromium plated handle including nuts, bolt and washers.

(b) Pedestal made out of 1.00 mm thick PBI sheet including painting with one coat of synthetic enamel paint (as per existing colour) over a coat of red oxide primer after preparation of steel surface.

(c) 20mm dia Chromium plated steel pipe for hanger

(d) Shelves of locker steel made out of 1.00 mm thick PBI sheet welded / rivetted with existing Almirah including painting with one coat of synthetic enamel paint (as per existing colour) over a coat of red oxide primer after preparation of steel.

(e) Locking device of brass bright finish, six lever with key in duplicate and fixed with new nut, bolt & making it fully functional in all respects.

Taking out carefully following old unserviceable parts of Table office steel and Supply & fixing new parts of size and shape as per drawing or as specified and directed :- Drg No TP (a) Top of size 1840 mm x 925 mm x 780mm) made out of 18mm thick melamine shade prelaminated particle board (top side decorative of approved shade) with 4mm thick teak wood edging alround.

(b) Locking device of brass bright finish, six lever with key in duplicate and fixed with new nut, bolt & making it fully functional in all respects.

Taking out carefully following old unserviceable parts of Table office clerk steel and Supply & fixing new parts of size and shape as per drawing or as specified and directed :- Drg No HFD-2051 (a) Top of size 1370 mm x 760 mm made out of 18mm thick melamine shade prelaminated particle board (top side decorative of approved shade) with 4mm thick teak wood edging alround.

(b) Drawer made out of 1.00mm thick PBI sheet including painting with one coat of synthetic enamel paint (as per existing colour) over a coat of red oxide primer after preparation of steel surface.

(c) Locking device of brass bright finish, six lever with key in duplicate and fixed with new nut, bolt & making it fully functional in all respects.

Taking out carefully following old unserviceable parts of Table steel (900 x 600mm) and Supply & fixing new parts of size and shape as per drawing or as specified and directed :- Drg No TP (a) Top made out of 18mm thick melamine shade prelaminated particle board (top side decorative of approved shade) with 4mm thick teak wood edging alround.

(b) Drawer and runners made out of 1.00mm thick PBI sheet including painting with one coat of synthetic enamel paint (Olive Green) over a coat of red oxide primer after preparation of steel surface.

(c) Locking device of brass bright finish, six lever with key in duplicate and fixed with new nut, bolt & making it fully functional in all respects.

Supply and fixing in replacement of top of Table dining steel of size 1800 mm x 900 made out of 18mm thick melamine shade prelaminated particle board (top side decorative of approved shade) with 4mm thick teak wood edging alround. Drg No TP

Supply and fixing in replacement of top of Table dining steel of size 1800 mm x 600 made out of 18mm thick melamine shade prelaminated particle board (top side decorative of approved shade) with 4mm thick teak wood edging alround. Drg No TP

Taking down old unserviceable parts from Chair Dining Steel and supply and fixing of new parts of sizes and shape of all members as per drawing and as directed by Engr-in-charge. Drg No TP (a) Seat size 450mm x 400mm x 12mm thick ply one side teak face.

(b) Back size 420mm x 260mm x 12mm thick ply one side teak face.

Taking down old unserviceable parts from TEAPOY (600 x 600 x 420mm) wooden and supply and fixing of new parts made out of shisham wood duly seasoned free of knots. Sizes of all members shall be as per drawing and as directed by Engr-in-charge. Drg No :HFD-2034 (a) Long rail

(b) PVC Shoe

(d) Top made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround and tighening the frame with wooden corner complete all as per drawings.

Taking out carefully following old unserviceable steel bench (1800 x 300mm) and Supply & fixing new planks made out of 1st class hardwood shisham wood duly seasoned free of knots fixed with GI nuts and bolts of appropriate size including french polishing and size of all members shall be as per drawing or as specified and directed :- Drg No :- FD-TP (a) Seat plank of size 1800 x 300 x 25mm

(b) M&L for preparation of old painted surfaces of steel bench and painting with one coat of synthetic enamel paint (as per existing colour) complete all as directed by Engineer-in-Charge.

(c) Welding to broken / craked joints as per existing design rest complete all as specified and directed by the Engineer-in-Charge

Taking out carefully following old unserviceable parts of Chair without arms (445x440x835mm) and Supply & fixing new parts as per existing or as per drawing :- Drg No :- TP (a) Seat made from 12mm thick hot pressed ply wood upholstered with fabric and polyuretheane form and PVC lipping all around duly covered with leatherized rexine cloth as per exising design and as shown on drg. Note :- Rate of leatherized rexine cloth shall not be less than Rs 280/- per metre

(b) Back made from 12mm thick hot pressed ply wood upholstered with fabric and polyuretheane form and PVC lipping all around duly covered with leatherized rexine cloth as per exising design and as shown on drg. Note :- Rate of leatherized rexine cloth shall not be less than Rs 280/- per metre

Taking out carefully following old unserviceable parts of Chair executive revolving /computer and Supply & fixing new parts as per existing or as per drawing :- Drg No :- TP (a) Seat made from 12mm thick hot pressed ply wood upholstered with fabric and polyuretheane form and PVC lipping all around duly covered with leatherized rexine cloth as per exising design and as shown on drg. Note :- Rate of leatherized rexine cloth shall not be less than Rs 280/- per metre

(b) Back made from 12mm thick hot pressed ply wood upholstered with fabric and polyuretheane form and PVC lipping all around duly covered with leatherized rexine cloth as per exising design and as shown on drg. Note :- Rate of leatherized rexine cloth shall not be less than Rs 280/- per metre

(c) Caster wheel best quality

(d) Pedestal assembly

(e) Hydraulic System

(f) Arm rest

Taking out carefully following old unserviceable parts of screen moveable 3 fold 1650mm H x 2400mm W and Supply & fixing new parts as per existing or as per drawing :- Drg No :HFD -2015 (a) Cloth screen green colour good quality rate not be less than Rs 200/- per metre including stiching and fitting to screen frame.

(b) Hook & wire spring

(c) Caster wheel best quality

Taking down old unserviceable parts from TABLE BED SIDE and supply and fixing of new parts including all members shall be as per drawing and as directed by Engr-in-charge. Drg No :- TP (a) Table Top of size 410mm x 410mm shall be made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including PVC edging alround and tighening the frame with wooden corner complete all as per drawings.

(b) legs including rubbder shoe including one coat of synthetic enamel paint

(c) Welding to broken / craked joints by Gas welding as per existing design rest complete all as specified and directed by the Engineer-in-Charge

M&L for refixing existing 32 mm bore GI pipe legs / short rails / long rails of charpoy by providing electric running welding after removing the existing welding by burning and applying two coats of Aluminum paint over welded portion of GI pipe frame complete all as specified and as directed by Engineer-in-charge. Drg No TP

Taking out old unserviceable 3 way GI elbow from GI Charopy frame and supply & fixing new 32 mm dia GI elbow 3 way (ISI Marked) and tightening the frame complete all as specified. Drg No TP

Taking out old unserviceable GI check nut from GI Charpoy frame and supply & fixing with new GI check nut suitable for 32 mm bore pipe as per existing size complete all as specified. Drg No TP

Taking out old unserviceable GI long rail from GI Charpoy frame and fixing new long rail of GI pipe 32 mm bore medium grade (ISI marked) after cutting and threading to the pipe all as shown on drawing & as directed. Drg No TP

Taking out old unserviceable short rail from GI Charpoy and fixing short rail made out of old long rail obtained from serial item No 65 here-in-before including necessary cutting & threading complete all as specified & as directed. Drg No TP

Taking out old unserviceable leg from GI Charpoy and fixing leg made out of old short rail obtained from serial item No 66 here-in-before including necessary cutting & threading and supply and fixing 2 Nos new clamps to each leg made out of 15mm x 3mm flat iron duly welded to legs for MNF set as shown on drg complete all as specified & as directed. Drg No TP Note for Srl item No 67 to 69 :- (i) GI pipe required for fixing shall be issued under Schedule 'B' free for fixing only. (ii) Old unserviceable pipe shall Govt property and shall be deposited in store Yard of BSO by the contractor without any extra cost to department.

Removing unserviceable Ply Top from charpoy GI 32mm bore and supply and fixing new ply 12mm thick 7 ply, commercial type, exterior grade (BWR) on top suitable for GI charpoy as shown in drg of approximate size 1980mm x 920mm with mild steel galvanized iron nuts & bolts of size 70mm x 6mm with GI washer (heavy weight) (Nos bolts to be used 12 Nos ) "MES" will be embossed on four corner of the ply top all as approved by GE and directed by Engineer-in-Charge. Drg No TP

Removing unserviceable Ply Top from Double bunk with ply top and supply and fixing new ply 12mm thick 7 ply, commercial type, exterior grade (BWR) on top suitable for GI charpoy as shown in drg of approximate size 1800mm x 900mm with mild steel galvanized iron nuts & bolts of size 70mm x 6mm with GI washer (heavy weight) (Nos bolts to be used 12 Nos ) "MES" will be embossed on four corner of the ply top all as approved by GE and directed by Engineer-in-Charge. Drg No TP

Taking out carefully following old unserviceable parts of Bed hard steel and Supply & fixing new parts made out of shisham wood duly seasoned free of knots and size of all members shall be as per drawing and as specified and directed :- Drg No :- Hospital furniture / TP (a) PVC shoe

(b) Head board frame made out of 18mm thick prelaminated particle board ISI marked alongwith PVC beading to sides and top of head board complete all as specified and directed by Engineer - in – Charge

(c) Foot board frame made out of 18mm thick prelaminated particle board ISI marked alongwith PVC beading to sides and top of foot board complete all as specified and directed by Engineer - in – Charge

(d) Ply top made of 12mm thick plywood BWR ISI marked of size 1980mm x 910mm Make :- Century Ply wood / Kit Ply / Sharda Ply wood / National Ply wood

Removing unserviceable Ply Top from Charpoy iron pipe with hard top and supply and fixing new ply 12mm thick 7 ply, commercial type, exterior grade (BWR) on top suitable for GI charpoy as shown in drg of approximate size 1980mm x 920mm with mild steel galvanized iron nuts & bolts of 6mm dia, 70mm long with GI washer (heavy weight) (Nos bolts to be used 12 Nos ) "MES" will be embossed on four corner of the ply top all as approved by GE and directed by Engineer-in-Charge. Drg No. - TP Make of Plywood :- Century / Kitply / Green Ply / Archid Ply Note: The size of 12mm thick, 7 ply, commercial type, exterior grade (BWR) viz 1980mm x 920mm is firm. No tolerance in size of ply shall be accepted.

M&L for removing unserviceable PVC shoe of Charpoy with hard top and providing new best quality PVC shoe all as approved by GE and directed by Engineer-in-Charge. Drg No. - TP

M&L for continuous electric arc welding around broken joints of long rails, short rails, legs etc. of charpoy IP hard top & bed hard MAP steel all as specified and directed by Engineer - in - Charge Drg No. TP

Taking out carefully following old unserviceable parts of Bed hard box type with ply top (93cm x 183cm), Supply & fixing new parts and size of all members shall be as per drawing and as specified and directed :- Drg No :- Hospital furniture / TP (a) Aluminium anodized hasp & staple 125mm long

(b) Ply top made of 12mm thick plywood BWR ISI marked of size 1410mm x 850mm Make :- Century Ply wood / Kit Ply / Sharda Ply wood / National Ply wood

(c) MS tower bolt

(d) Welding to broken / craked joints as per existing design rest complete all as specified and directed by the Engineer-in-Charge

Taking out carefully following old unserviceable parts of Chair writing steel and Supply & fixing new parts as per existing or as per drawing Drg No :TP (a) Handle bakelite material colour brown / black

(b) Seat and back made from foam cushioned 75mm thick, 32 density duly covered with leatherized rexine cloth as per exising design and as shown on drg. Make of cushion : Sleepwell / Kurlon / NINDIYA or ISI marked as approved by Garrison Engineer. Note :- Rate of leatherized rexine cloth shall not be less than Rs 280/- per metre

(c) Rubber shoes

Taking down old unserviceable parts from PEG TABLE (450 x 300mm) and supply and fixing of new parts made out of shisham wood duly seasoned free of knots. Sizes of all members shall be as per drawing and as directed by Engr-in-charge. Drg No :- Hosdpital Furniture (a) Long rail

(b) PVC Shoe

(d) Top made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround and tighening the frame with wooden corner complete all as per drawings.

Taking out carefully following old unserviceable parts of Table Dinning 8 Persons and Supply & fixing new parts made out of shisham wood duly seasoned free of knots and size of all members shall be as per drawing or as specified and directed :- Drg No :- HFD-2029 (a) Leg

(b) Front rail

(c) PVC Shoe

(d) Top of size 1800 x 900mm made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround and tighening the frame with wooden corner complete all as per drawings.

Taking out carefully following old unserviceable parts of Table (900 x 600 x 760mm) and Supply & fixing new parts made out of shisham wood duly seasoned free of knots and size of all members shall be as per drawing or as specified and directed :- Drg No :- HFD-2052 (a) Leg

(b) Top rail

(c) PVC Shoe

(d) Top of size 900 x 600mm made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround and tighening the frame with wooden corner complete all as per drawings.

Taking out carefully following old unserviceable parts of Table centre two tire and Supply & fixing new parts made out of shisham wood duly seasoned free of knots and size of all members shall be as per drawing or as specified and directed :- Drg No :- HFD-2040 (a) Leg

(b) Top rail

(c) PVC Shoe

(d) Top of size 900 x 600mm made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround and tighening the frame with wooden corner complete all as per drawings.

S&F in replacement members for frame of Table (steel) made out of 25mm square mild steel tube, 16 gauge (1.60mm) wall thickness including cutting, welding, bending etc including painting with one coat of synthetic enamel paint (Olive Green) over a coat of red oxide primer after preparation of steel surface complete all as specified and directed by Engineer-in-Charge.

M&L for repairing to the steel furniture by making gas welding having 3mm thickness of steel members and 25mm to 30mm length indluding preparing the surface by beveling etc as required.

M&L for preparation of old painted steel & iron surfaces of under mentioned items and applying one coat (spray painting) of synthetic enamel paint (as per existing colour) on all steel & iron surfaces (inside & outside including shelves, drawers etc.) after necessary denting, applying putty to level the surface before painting/polishing and french polish on wooden portion and wooden furniture complete all as specified and directed by Engineer-in-Charge. (a) Almirah Large steel Drg No HFD-2055 & TP

(b) Almirah medium steel Drg No TP

(c) Almirah with study table Drg No TP

(d) Bed side locker steel Drg No TP

(e) Table office steel Drg No TP

(f) Table Office clerk steel Drg No HFD-2051 & TP

(g) Table dinning steel Drg No TP

(h) Table Steel (900 x 600 mm) with or without drawer Drg No HFD - 2052 / TP

(j) Chair Dinning steel Drg No TP

(k) Chair CBA steel with arms Drg No HFD-2045

(l) Table Bed side Drg No TP

(m) Chair writing steel Drg No TP

(n) Screen moveable 3 Fold 1650mm H x 2400mm W Drg No -HFD-2015

(o) Rack adjustable 6 tire steel Drg No HFD-2065

(p) Storage rack Drg No TP

(q) Side Rack Drg No HFD-2042

(r) Table Dinning 8 Person Drg No HFD-2029

(s) Table centre two tire Drg No HFD-2040

(t) Peg table Drg No Hospital Furniture

(u) Teapoy wooden Drg No :- HFD-2034

(v) Double bunk with ply top Drg No TP

(w) Charpoy IP hard top Drg No TP

(x) Hard bed box type with ply top (93cm x 183cm) Drg No TP ---------------------------------------------------------------------------- Note :- A sum of Rs. 33472/- will be deducted on account of credit for dismantled/ demolished / taken down material. Please refer details on Srl Page No. 28 & 29 (Schedule of Credit) of Tender documents.

vardhman traders

B K CONTRACTORS