Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.8 LAccepted-AOC LANE NO 2 HOUSE NO 3 COL KEHAR SINGH COLONY KHUSROPUR JALANDHAR CANTT JALANDHAR PUNJAB 144005 | JALANDHAR | PUNJAB | 144005 | L1 | Accepted-AOC Bidder is L1 | |
| 2 | L2₹33.5 L+₹2.0 L (6.40%)Rejected-AOC | L2 | Rejected-AOC Bidder is L2 | |
| 3 | L3₹35.2 L+₹3.7 L (11.8%)Rejected-AOC 592 BANSANT AVENUE AMRITSAR 143001 | AMRITSAR | AMRITSAR | PUNJAB | 143001 | L3 | Rejected-AOC Bidder is L3 | |
| 4 | L4₹36.1 L+₹4.7 L (14.9%)Rejected-AOC | L4 | Rejected-AOC Bidder is L4 |
Tender Value
₹38.5 L
EMD Value
₹77,000
Closing Date
18 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Jalandhar Cantt
HQ CWE Nalwa Road Jalandhar Cantt PIN-144005
Please refer tender documents
2024_MES_647184_1
8323/84/E8
Open Tender
Civil Works
Item Rate
180 days
Jalandhar Cantt
Class D Category a(i) for contractors enlisted with MES
8 documents required · 8 mandatory
₹500
Garrison Engineer East Jalandhar Cantt
₹77,000
Yes
20 Sept 2024
20 Mar 2024
25 Apr 2024
20 Mar 2024
18 Apr 2024
6 Apr 2024
Amount
Demolition of cement concrete (unreinforced) in ground floors and paving n.exc 15cm thickness (below or above ground level) complete all as specified and directed.
Material and labour for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in flooring for laying floor finish complete all as specified.
Demolition of cement concrete in ground floor and paving/as in sunken portion (below or above ground level) complete all as specified.
Material and labour for cement concrete 1:5:10 type E-2 (using 40mm graded stone aggregate) as in sunken flooring complete all as specified and directed.
Water proofing treatment to sunken floors of kitchen, toilets, laboratories, bath and WCs etc shall be as under:- Notes:- Plan area of the floor finish to be measured. (a) The top surface of the sunken RCC slab shall be laid with cross slope as indicated in drgs towards the spouts. The min thickness of the RCC slab shall be as specified in drg. (b) PCC 1:1.5:3 fillets at corners with 12.5mm graded aggregate shall be provided. (c) Plastering in CM (1:3) 15mm thick with WPC on walls as well as on sunken floor finished even and smooth using extra cement. (d) GI Pipe 40mm dia medium grade be inserted at the end of lateral slope projecting at least 15cm beyond the outer most projected part of the building below the drain pipe upto two storey construction and 25cm beyond two storey construction. (e) After doing the plaster, testing be carried out by ponding (for 72 hrs) the sunken portion before further treatment to the sunken slabs. Any leakage/seepage observed shall be rectified before carrying out water proofing treatment. (f) Two component Acrylic modified Cementitious coating :-
(i) The surfaces to be applied shall be completely dry and free from containments such as dirt, dust, oil, surface treatments and old coatings. Concrete substrates must be mechanically prepared using abrasive blast cleaning or milling to remove cement laitance, existing coating and achieve a gripping profile that is clean, dry and free from laitance and dry other form of surface contamination. The installation instructions in manufacture's published literature should be strictly complied with, including but not limited to the following:- (ii) Chipping out any visible cracks in "V-Groove" pattern as applicable. Special attention on this part. Cleaning of cracks & then filling those cracks with SIKA latex SBR 100 putty/Dr Fixit 302 SBR latex/ Perma latex SBR/FOSROC Nitabond SBR latex/Asian paint latex as required. Final cleaning of surface with power grinder, wire brush, hair brush & vacuum pressure if required. (iii) Dampen all surfaces immediately ahead of application of Acrylic modified Cementitious coating of sika Top Seal-107/Brush Bond FOSROC/Dr Fixit/STP/CICO. (iv) Whilst the surface is still damp from saturation (S.S.D), apply one coat of Acrylic modified cementitious coating of SIKA Top Seal-107 /Brush Bond FOSROC/Dr Fixit/STP/CICO of viscosity as per manufacturer's instructions. (v) Apply glass fabric sheet of SIKA Fab 1/FOSROC/Dr Fixit/STP whilst the first coat is wet. (vi) Once touch dry, apply second coat of Acrylic modified cementitious coating of SIKA Top Seal -107 /Brush Bond FOSROC/Dr Fixit/STP/CICO of viscosity as per manufacturer's instructions on the entire area. (vii) Second coat shall be applied after 6-8 Hrs of application of previous coat and in the direction right angle to the previous coat. (viii) The waterproofing coating should be taken to a height minimum 300mm above the finished floor level on the vertical surfaces. (ix) It is essential to cure Acrylic modified cementitious coating immediately after application (minimum 6-8hrs drying) for a minimum of 3 to 5 days to ensure full cement hydration and to minimize cracking.
(x) A protection plaster 12-15mm thick) in CM 1:3 admixed with appropriate integral water proofing compound has to be applied on the walls. Admixture: SIKA Plastocrete Plus/FOSROC/DR Fixit/STP/CICO conforming to IS 2645. Providing and applying a protection screed of 50mm thick 1:4, cement sand mortar admixed with SIKA Plastocrete over the applied water proofing coating on horizontal surfaces. Admixture: SIKA Plastocrete Plus/FOSROC/DR Fixit/STP/CICO conforming to IS 2645. (xi) All the corners and joints should be pretreated with an elastic waterproofing sealing tape with a woven bonding mesh on each surface and an elastic expansions zone in the centre of Make SIKA Seal Tape/FOSROC/Dr Fixit/STP. (xii) The membrane has to be protected in accordance with the manufacturer's recommendations until placement of concrete. The membrane to be inspected for damage just prior to concrete placement and make repairs in accordance with manufacturer's recommendations. (xiii) Waterproofing treatment has to be carried out through applicators authorised by the respective manufacturer's and approved by GE. (g) All the joints of pipes and traps within the sunken portion shall be sealed properly by epoxy sealant. (h) All CI traps in sunken slab to be enclosed with PCC 1:1.5:3 (Min 15cm) all around.
Demolition of brick work in cement mortar complete all as specified and directed.
Material and labour for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls in CM 1:4 complete all as specified.
Material and labour for brick work with sub class ‘B’ brick, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Material and labour for cutting chases, pinning in brick wall/slab etc and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and directed.
Material and labour for RCC (1:2:4) type B-1 nominal Mix using 20mm graded aggregate in slab supported on walls, beam and column in floors, roof, landing, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
Material and labour for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed.
Material and labour for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Material and labour for Granite (of any type) 16mm to 18mm thick work (table rubbed and polished) in steps, jambs, pilllars, window cill, cooking platforms and like in cement mortar (1:4) including, dismantling, pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of Granite laid over 20mm thick screed bed in CM 1:4 complete all as specified and directed.
Taking down cement plaster of any description including raking out joints, hacking for scrubbing down with water etc. complete all as specified and directed.
Material and labour for 15mm thick cement plaster in cement mortar 1:6 on brick or concrete surface finished even and smooth without using extra cement complete all as specified.
Material and labour for plastering 5mm thick in cement mortar (1:3) finished even and smooth without using extra cement as on ceiling complete all as specified.
Material and labour for rendering on concrete/ brick surfaces 15mm thick in CM 1:4 (externally) finished even and fair without using extra cement complete all as specified.
Material and labour for preparation newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.
Material and labour for preparation of newly plastered surface of ceiling including cornices pilasters etc. and applying three coats of white wash on ceiling complete all as specified and as directed.
Material and labour for preparation of newly plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.
Dismantling floor hearth or wall tiling/china mosaic including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.
Material and labour for non skid ceramic tiles/ non skid coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as per the existing tiles and size as suitable/ matching with the existing tiles in dados/ floors including screed bed or bedding layer 15mm thick in CM (1:6) complete all as specified and directed.
Supply and fixing Non skid ceramic coloured 7 to 8mm thick area of each tile exc 0.11 sqm but n.exc 0.18 Sqm in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed CM 1:6 complete all as specified and as directed.
Supply and fixing glazed ceramic coloured tiles300x450x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match including 10mm thick in cm (1:4) in vertical surfaces of walls/skirting etc. complete all as specified and as directed.
Taking down chowkhats or frame with shutter without taking off shutter from the frame area not exc 1.5 Sqm each and removal to store complete all as specified.
Taking down chowkhats or frame with shutter without taking off shutter from the frame area exc 1.5 Sqm each and n.exe 4.0 sqm removal to store complete all as specified.
Material and labour for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. using steel conforming to Fe-410 Gde-E-250 complete including drilled for fixing of steel sheeting or other covering; doors, door frame chowkhats etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including necessary cutting drilling and welding etc complete all as specified and directed.
Supply and fixing 35mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides including side lipping of 35x5mm complete all as specified and directed.
Supply and fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M S square tubes, Supply and fixing in opening as per specification & drawing given in SSR-2004 complete all as specified and as directed.
Supply and fixing 30mm factory made solid panel PVC door shutter consisting of frame made out of MS tube for top and bottom rail, MS frame shall be covered with heat moulded plain colour PVC “C” channel having strip of 20 mm width stuck inside with solvent cement rail on either side and as gap inset for top rail and bottom rail, welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supply and fixing in the frame and site as specification all as specified.
Material and labour for 150mm long aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified.
Supply and fixing 75mm size butt hinges aluminium alloy all as specified.
Supply and fixing 100mm size butt hinges medium weight cold rolled mild steel all as specified.
Supply and fixing 125mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.
Supply and fixing aluminium anodised barrel tower bolts of extruded section 200mm long, complete all as specified and directed.
Supply and fixing Extruded aluminium alloy handles, fabricated type, anodised 150mm in size, complete all as specified and directed.
Supply and fixing Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 250mm long, complete all as specified and directed.
Supply and fixing floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor overall length of cover plate 75mm complete all as specified and directed.
Material and labour for preparation of new wood surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
Supply and fixing Steel window/ ventilator (combination) with glazed shutter as well as gauged shutter with side hung/ top hung shutters incl box type / projecting type hinges, and steel peg stay, handle & locking arrangement and frame made out of 1.25mm thick pressed steel frame including Guard bars, hold fast, tower bolt and handles etc and necessary cooler arrangement in window and fixed with PCC (1:2:4), complete as per Drg No CEJZ/TD-1020/08 Sheet No. 1/3 to 3/3. Note:- The above rate for glazed and gauged shutter window/ventilator and measured one time clear opening for payment of window/ventilator
Supply and fixing stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.
Supply and fixing 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm each panes complete all as specified.
Supply and fixing figured glass pin headed type, 3 mm thick and fixed with oil putty, size of glass n.exc 0.50 sqm in each pane complete all as specified and directed.
Material and labour for preparation of new or previously untreated steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
Supply and fixing 1000 ltrs rotational moulded polythine water storage tanks (cylinder vertical with closed top) hoisted and fixed in position including ball brass valves, high pressure with polythene float and fly nut complete screw for iron pipe or brass ferrule all as specified in SSR Part-I.
Supply and fixing 25mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 mm - 210 gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified.
Supply and fixing in repair 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.
Taking down eaves gutters and rainwater pipes/sewage pipe (any size or pattern), including all fittings, heads, shoes, bends, swan necks etc. including cleaning or refixing or removal to store complete all as specified and directed.
Supply and fixing 110mm bore PVC pipes single socketed in any length with rubber ring joints fixed to walls or laid in floor, complete all as specified and directed.
Supply and fixing 75 mm bore PVC pipes single socketed in any length with rubber ring joints fixed to walls or laid in floor, complete all as specified and directed
Supply and fixing 110mm dia PVC (SWR ) junction single, (Single T) equal or unequal with rubber rings joints fixed to walls complete all as specified and as directed.
Supply and fixing 110mm dia PVC (SWR ) junction single, (Single T) with access door equal or unequal with rubber rings joints fixed to walls complete all as specified and as directed.
Supply and fixing 75mm dia PVC (SWR ) junction single, (Single T) equal or unequal with rubber rings joints fixed to walls complete all as specified and as directed.
Supply and fixing 75mm dia PVC (SWR ) junction single, (Single T) with access door equal or unequal with rubber rings joints fixed to walls complete all as specified and as directed.
Material and labour for 110mm PVC (SWR) PVC (SWR) floor/nahani trap, plain with grating including jointing with solvent cement fixed in repairs complete all as specified and directed.
Material and labour for 75mm PVC (SWR) PVC (SWR) ‘P’ or ‘S’ trap with grating including jointing with solvent cement fixed in repairs complete all as specified and directed.
Supply and fixing 110mm dia PVC (SWR) bends any radius complete all as specified and as directed.
Supply and fixing 75mm dia PVC (SWR) bends any radius complete all as specified and as directed.
Supply and fixing PVC(SWR) vent cowl 75mm dia complete all as specified and directed.
Supply and fixing PVC(SWR) vent cowl 110mm dia complete all as specified and directed.
Material and labour for PVC (SWR) gully trap 125/110mm,setting and jointing with solvent cement complete all as directed.
Taking down GI Tubing 15mm dia and connection including cleaning for refixing or removal to store complete all as specified and directed.
All as per Srl item No. 63.00 here-in-before but 20mm dia GI tubing.
All as per Srl item No. 63.00 here-in-before but 25mm dia GI tubing.
Supply and fixing GI tubing 15mm bore fixed to wall/ ceiling or floor complete all as specified and directed.
All as per Srl item No. 66.00 here-in-before but 20mm dia GI Tubing.
All as per Srl item No. 66.00 here-in-before but 25mm dia GI tubing
Supply and fixing in repairs angle valves 15mm cast copper alloy chromium plated fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed.
Supply and fixing in repair bib taps fancy type ISI marked cast copper alloy chromium plated suitable for 15mm bore pipes with crutch or butter fly handle screwed for iron pipe or brass ferrule all as specified.
Supply and fixing in repair Wall Mixer 3-in-1 with two way wall diverter with SS Cover plate and all connected accessories ,suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and directed.
Supply and fixing PVC connection 450mm long suitable for 15mm bore pipe including PTMT nuts complete all as specified and directed.
Supply and fixing chromium plated grating 125mm dia circular of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified and directed.
Supply and fixing PVC waste pipe 32 mm dia flexible for wash hand basin urinal complete complete all as specified and directed.
Supply only water proofing compound complete all as specified and directed.
Supply and fixing in repair Orrisa pattern WC vitreous china white of size 580mmx440mm including P trap and breaking up of existing damaged WC seat and connecting flush pipe etc complete all as specified and directed by Engineer-in-Charge.
Supply and fixing Vitreous China White Wash Down Water Closet Pan with P Trap and Fixing Bolts (excluding Flushing Cistern and Flush Pipe) including connection to drain (or outgoing pipe) and to Flushing Pipe, Anti-syphonage Pipe, etc. and Making Good to Floor/ disturbed surfaces including dismantling the existing unserviceable Water Closet complete all as specified and directed.
Supply and fixing in repair Jet spray with holder for EWC 1.5mtr long suitable for 15mm dia for iron pipe or for brass ferrule all as specified and directed.
Supply and fixing in repair hand shower (health faucet) 1.00mtr long flexible tube & wall hook suitable for 15mm dia for iron pipe or for brass ferrule all as specified and directed.
Supply and fixing in repairs vitreous china wash basin white oval type of size 560x 410 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.
Supply and fixing in repair single lever basin mixer with popup waste suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.
Supply and fixing in repairs Vitreous China Half stall urinal complete including providing and fixing plugs, spreader and bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified.
Supply and fixing in repairs PVC low level valve less symphonic action type flushing cistern of capacity 10 ltr including float valve, brackets, PVC short bend complete all as specified.
Supply and fixing in repair towel rail chromium plated brass 600 mm long fixed with and including CP brass screw complete all as specified and directed.
Supply and fixing in repair Towel Ring of chromium plated fixed with and including Chromium plated brass screws complete all as specified and directed.
Supply and fixing in repair Over Head Shower square wall shower (Adjustable) of size (6”x6”) including all fittings and suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.
Supply and fixing in repair Soap dish stainless steel chromium plated fixed with brass screws and rawl plug complete all as specified.
Material and labour in repair chromium plated peg set of 5, fixed with screws and plugging to rear side of door shutter in bath, complete all as specified and directed.
Supply and fixing in repair, Sheet Glass Shelf 500x125mm (with brass brackets) and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed.
Supply and fixing in repair, corner shelf 300mm (with brass brackets) and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed.
Taking down carefully copper / aluminium point wiring of any type (i.e. on wooden batten, surface conduit, casing capping or concealed conduit) complete for light, fan socket or power point with fitting Supply and fixing fixtures such as ceiling rose, electric fittings, holders, switches, sockets, wooden batten, conduit etc. including accessories such as wooden gutties/rawal plug, screw for taking credit of unserviceable items and keeping safe serviceable items for reuse at site etc including making good disturbed surface to match the existing surface complete all as specified and directed.
Material and labour for point wiring for light/fan point with 1.5 sqmm (nominal area), 1100 volt grade PVC insulated FRLS type multi stranded copper conductor cable drawn in and including concealed rigid PVC conduit medium grade ISI marked with accessories including cutting chases for laying of conduit/ fixing of boxes in walls/ floors etc including making good to disturbed surfaces as per adjoining specification and terminated in concealed terminal boxes for modular cover sheet of suitable modules and earth continuity PVC insulated FRLS type cable with stranded copper conductor of size 1.5 sqmm (nominal area) green colour as earth wire connected with earth dolly for one light point controlled one switch complete all as specified and as directed.
All as per Srl Item No. 93.00 here-in-before but for 3 pin 5 Amp socket point controlled by one switch on same board.
All as per srl item No. 93.00 here-in-before but with 2.5 Sqmm (nominal area) PVC stranded copper conductor cable 3 pin 15 Amp socket outlet with 2.5 Sqmm PVC insulated with stranded copper conductor cable for continuous earth continuity conductor independent board complete all as specified and directed.
Supply and fixing in replacement switch modular type, 6 Amps, 240 Volt AC single pole, one way including taking down existing switch complete all as specified.
Supply and fixing switch modular flush type, 16 Amps, 240 Volt AC single pole, one way including taking down existing switch complete all as specified.
Supply and fixing socket out let 6 Amp, 3 pin modular type complete all as specified.
Supply and fixing socket outlet multipurpose 3 in 2/3 pin, 6 & 16 Amps, modular type complete all as specified.
Supply and fixing SPN sheet metal industrial socket plug & enclosure with a two pin and earth plug and socket complete with one MCB 20A and metal top plug complete all as specified and directed.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and directed.
Supply and fixing in replacement LED Tube light CRCA Box type fitting 20W (single/ double side) complete with 20 watt LED tube rod retrofit type and connecting electricity to celling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75mm 3 core complete all as specified and directed.
Refixing serviceable tube light fitting, ceiling fan etc as specified and directed.
Taking down Exhaust fans, any make and size, removing electrical connection, dismantling blades etc, opening of motor, cleaning of fan body and blades using detergent, greasing and oiling of serviceable ball bearing, bushes, replacement of defective/ unserviceable ball bearing and other parts, reassembling motor and fan, testing and hanging in position complete all as specified and directed. Note:- The old winding in exhaust fan may aluminium/ copper is on claim by contractor.
Material and labour for rewinding of exhaust fan motor 240 volt, 50 Hz, 300 mm sweep, any make, with super enameled copper winding wire of existing size, same No. of turns, wound with machine, providing insulation material of E-grading, varnishing, connection with flexible copper wire 0.472mm dia upto connector block complete all as specified and directed.
Supply and fixing in repair heating element 1500 watt complete all as specified and directed
Supply and fixing in replacement thermostat for geyser of capacity 35 ltrs/ 25 ltrs/ 15 ltrs complete all as specified and directed
Supply and fixing in replacement PVC connection hot and cold water pipe 18” long, 15mm outer dia with brass jem nut and washer, both side complete all as specified and directed
Taking down geyser, any make and size, removing electrical connection, dismantling water pipes, connection etc., testing and refixing in position complete all as specified and directed
M/S Vinod Kumar
SATISH AGGARWAL AND CO
BHARAT ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .