Renovation Upgradation of electric system which includes replacement of worn-out damaged wiring safety devices various types of fans lighting fixtures by new LEDs and geysers,cabling etc in Admn.Block,Accounts dept.and civil dept at SKIMS MCH Bemina

Amount

Providing, fixing of fresh lighting point (5-6 amp) exposed,using PVC in double locked PVC channel 25x1.6 mm thick or PVC conduit 1" dia 1.5 mm thick with accessories to be fixed on the surface of the wall with rowel plugs, saddles, screws, using multi-strand 3 x1.5 mm sq. pvc insulated copper wire (P+N+E) (Havells/Finolex/ Polycab/Paramount make FR) complete with P/F of switch 5/6 amps F/T (SSK/Havell's Reo make) to be fitted on 3mm Bakelite sheet suitable size,M.S/Wooden box, rowel plugs & screws etc. complete Point.( worn-out and fresh D.G light points )

Wiring for 16 amps power points using FR PVC insulated copper conductor , multistrand core cable 3 X 2.5 sq mm (P+N+E) (Havells make) in surface PVC cassing as required with P/F of 16/amp Switch and Socket comb.(Havell's Reo/SSK make), bakalite sheet,wood or iron box ete. complete in all respects at site. .( D.G Power points for systems )

Providing and fixing of bakelite /phenlic sheet 3mm thick against damaged and for inspections holes of various sizes required at site. complete in all respects at site

P/F F/T 5 pin socket 6 amps (SSK / Havell's Reo make)

P/F Fan dimmer Stepped type (SSK / Havell's Reo make) .

Providing and fixing Exhaust fan 250 mm sweep with plastic shutter complete (Havell's/ Bajaj /Crompton make) agaist damaged/burnt out one.

Providing and fixing of Ply board 12 mm thick suitable size with making of central hole for fixing of above mentioned exhaust fans complete with civil works. Average Size 15 " X 15 "or requried size as per site requriment

Providing and fixing of ceiling fans 1200 mm sweep(Havells / Crompton/ Bajaj make) against nonfunctional/damaged, The job includes cost of fixing of iron hook of suitable size & connecting wire 2 core as required.

P/F of Led 4 feet long batten 6000/6500k Light having extruded aluminium heat sink with anti-glare diffuser with energy efficient electronic driver CRI greater than 85 with minimum sytem lumens 2000 and maximum wattage 20 to 25 including connection with multistrand copper conductor 3 core cable etc as required at site.(Philips /Trilux / Zumtobel make)

Providing and fixing of Led 2 feet long batten 6000/6500k Light having extruded aluminium heat sink with anti-glare diffuser with energy efficient electronic driver CRI greater than 80 with minimum sytem lumens 1300 and maximum wattage 12 including connection with multistrand copper conductor 3 core cable etc as required at site.(Philips /Trilux/ Zumtobel make)

Supply & laying circuit wire FR PVC insulated copper conductor , single core cable 3 X 4 sq mm (P+N+E) in the existing surface/ recessed conduit as required for Fresh light point circuit and 16/amp power points. (Havells/polycab/ Finolex/ KEI/Paramount make) ( single wire)

Same as above but 2.5 sq. mm for light points.

Same as above but 6 sq. mm for sub main circuits

P/F Double locked pvc channel 25x 2mm With allied accessories.( Atul/Polycab/Ravindra make).

P/F of Flexible PVC pipe 1" dia.

P/F of 25 mm dia ISI marked pvc conduit 2 mm thick complete with bends, raval plugs, saddles etc. ( Atul/Polycab/Ravindra make).

Providing and fixing of MCCB enclosure 4 pole metalic 16 SWG thick ( for fixing of above mantioned 63 A MCCB TPN ) size 1.5 x1.5'x1' complete wih painting, gland houles, hinged type, lockable door with painting to be fixing on wall. Complete with civil work at site. (02 Nos )

Providigng and fixing of MCCB 63/ 100 amps TPN 25kA B/ capacity ( Legrand/Schneider acti-9/ Siemens make) 02 nos for Accounts deptt./Admn. block and 02 nos for D.G Supply in Accounts deptt./ Admn block and civil deptt.

Supplying and fixing 8 way, TPN , sheetsteel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper insulated bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted including earthing etc.as required. (SSK/Honeywell/ Havells/Indo Asian /Schneider make) ( 02 nos for Accounts deptt./Admn. block I & II Floor and 02 nos for Medical education, Transport section and civil deptt.

Circuit wire to be laid as per site requirements using multi strand pvc insulated copper wire (Havells /Finolex/ Polycab/Paramount/KEI make FR) (excluding the cost of conduit) as main from OPD Cpower controll Room upto Sub DB's First and 2nd Floor OPD Block

16mm 2 multi strand pvc insulated copper.( to be laid as 3 Phase & Neutral )

10 mm 2 multi strand pvc insulated copper. (For Earthing Wires)

Providing and making of end termination of the following LT wires including Thimbling, crimping tapping, testing and connecting as per site requirements (Dowels/3D make)

16 Sq. mm Bottle type copper Thimbles for copper wire single core multi strand ( TPN )

10 Sq. mm Bottle/Lug type copper Thimbles for copper wire single core multi strand ( TPN )

Providing and laying of spans of 3 ½ core XLPE / PVC insulated Al. cable Armoured of 50 sq. mm sizes for D.G Power supply from main power control Room near J&K Bank to main D.B civil works division. (Polycab/Universal/Skytone/Paramount/ Havel's make)

Providing and laying of spans of 3 ½ core XLPE / PVC insulated Al. cable Armoured of 35 sq. mm sizes for D.G Power supply from main D.B civil works division to Sub D.B accounts deptt./Admn. Block. (Polycab/ Universal /Skytone/ Paramount/ Havel's/Gloster make)

Providing and making of end termination 50 Sq. mm 3.5 core LT cable the job including Bottle/Lug type thimbling, crimping tapping, testing and connecting as per site requirements (dowels/3D make)

Same as above in item no 22 but 35 sq. mm 3.5 core

Supplying and fixing 6 way, TPN , sheetsteel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper insulated bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted including earthing etc.as required. (SSK/Honeywell/ Havells/Indo Asian /Schneider make) ( 01 nos for Accounts deptt./Admn. block and 01 nos for civil deptt. of D.G power Supply

Providing laying of fresh 6/8 SWG G.I round bear wire For Earthing From power control room near J&K Bank to Sub D.B's of Accounts/Admn. Block/Civil works division etc. first and 2nd floor.

Providing and laying of spans of 3 ½ core XLPE / PVC insulated Al. cable Armoured of 95 sq. mm sizes as main ( From main power control Room near J&K Bank to Accounts deptt. / Admn. Block. (Polycab/Universal/Skytone /Paramount/ Glostar make) against damaged/brunt out at various place.

Providing and fixing of clamps with size 25x3 mm MS flate. For one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 95 and 50 sq. mm 3.5 core size to be fixed on wall surface as required.( 02 nos cable)

Providing and fixing of clamps with size 25x3 mm MS flate. For one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 35 sq. mm 3.5 core size to be fixed on wall surface as required.

Providing and making of end termination 95 Sq. mm 3.5 core LT cable the job including thimbling, crimping tapping, testing and connecting as per site requirements (dowels/3D make)

Providing and fixing following rating and breaking capacity and Four pole MCCB in cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.. (Legrand /Hager/ Schiender NSX/Siemens(3VL) make )( Adjustable range from .7 to1) in Powe controll Room College near J&K Bank for Accounts/Admn./Civil/Transport section and Medical education separtment. (For normal and emergency power supply )

MCCB 160 amps 4 pole 25KA B/capacity

MCCB 100 amps 4 pole 25KA B/capacity

Supply and laying of 35 sq. mm of PVC insulated multistrand copper wire Unarmoured, overall PVC sheathed 1.1 KV grade cables (Havells/Finolex/Polyab /KEI/Paramount make) to be connected with above MCCBs and main bus bar of panel in main controll room college.

Providing and making of end termination 35 Sq. mm 3.5 core LT cable the job including bottle and lug type Copper thimbling, crimping tapping, testing and connecting as per site requirements (Dowels/3D make)

K.J. Enterprises

M/S BHAT SYNDICATE

M/S BHAT ELECTRICALS