Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.0 LAccepted-AOC RAIPARA CHHAL DIST RAIGARH CHHATTISGARH 496665 | RAIGARH | CHHATTISGARH | 496665 | L1 | Accepted-AOC L1 Bidder | |
| 2 | L2₹41.7 L+₹9.7 L (30.4%)Rejected-Finance B 407 ANANT IMAGINE APARTMENT OLD BUS STAND KORBA DIST KORBA CG 495677 | KORBA | CHHATTISGARH | 495677 | L2 | Rejected-Finance Unsuccessful Bidder |
Tender Value
₹47.1 L
EMD Value
₹58,900
Closing Date
25 Apr 2025, 5:00 pmClosed
Staff Officer (Civil) SECL Raigarh Area
Office of Staff Officer (Civil) SECL Raigarh Area
Strengthening of Entry and Exit Portions of Weigh Bridges No. 09, 10, 11 and 12 at Chhal OCM, Chhal Sub-Area
2025_SECL_333875_1
SECL/GM/RGH/SOC/e-Tender/ 2025-26/02 dtd 08.04.2025
Open Tender
Civil Works - Roads
Item Rate
120 days
Raigarh
As per NIT
3 documents required · 3 mandatory
₹58,900
31 May 2025
8 Apr 2025
26 Apr 2025
8 Apr 2025
25 Apr 2025
9 Apr 2025
8 Apr 2025 - 13 Apr 2025
Amount
Item Description/ Heading
Removal of unserviceable soil with disposal upto 1000metres Removal of unserviceable soil including excluding excavation ,loading & disposal upto 1000 metres lead but excluding replacement by suitable soil which shall be paid separately as per clause 305.
Granular Sub-base with Well Graded Material (CBR>30 or more) (Table:- 400-1 & Table 400-2) Construction of granular sub-base by providing well graded material like natural sand crushed gravel or crushed stone having CBR >30, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator or plant mix method at OMC, and compacting with vibratory rollers of 80 to 100 kN static weight to achieve the desired density, complete as per Clause 401 of Specification.for grading (II) Material
Granular Sub-base with Well Graded Material (CBR>30 or more) (Table:- 400-1 & Table 400-2) Construction of granular sub-base by providing well graded material like natural sand crushed gravel or crushed stone having CBR >30, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator or plant mix method at OMC, and compacting with vibratory rollers of 80 to 100 kN static weight to achieve the desired density, complete as per Clause 401 of Specification.for grading (III) Material
Dry Lean Cement Concrete Sub- base Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing as per clause 601 of specification complete in all respect.
Cement Concrete Pavement Construction of un-reinforced, dowel jointed, plain cement concrete pavement M-40 grade concrete over a prepared sub base with cement , coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, admixtures as approved, curing compound, finishing to lines and grades as per drawing as per IRC 15 2011 and as per relevant clauses of section 602 of specifications complete but excluding cost of steel in dowel bar and tie rods etc.
Add extra for the cost of steel in dowel bar & tie rod including craddle ,laps etc.complete required as per design.(i)mild steel
Add extra for the cost of steel in dowel bar & tie rod including craddle ,laps etc.complete required as per design.(II)tor steel
Total impact of GST for the purpose of CTC
AEKANSH GROUP (BID ID -1149791)
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_346122.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .