8650 SPECIAL REPAIR TO MAIN GATE ALONGWITH CONCERN SECURITY WALL OF SOUTH CAMPUS, SECURITY WALL FROM CIV EST DEPT TO DHANVANTRI AUDITORIUM AND SINGLE OFFICER ACCN (OSR) AT AFMC UNDER GE (C) PUNE

Dismantling posts or struts (wood, steel or R.C.C.) any section, including M&L for taking out embedded portion of posts from any position and making good the disturbed surface on natural ground complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

Supply only chain link MS galvanisd fencing, any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

S&F mild steel framed work of any reqd shape such as ornamental grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, door chowkats of angle or iron safety door, fabrication to decorative type main entrance door upto 3.00mtr height of each leaf, other section and similar works complete of Gde Fe-290 Gde E-165 including welding etc complete all as specified and directed. (Note : Rates to be included in this items of all decorative type desgin fabrication materials (factory made arrows of reeqd size) handles, heavy duty pintle hinges, necessary locking system for iron gate as approved by the Engr-in-Charge). All materials to be measured in kg.

S&F mild steel posts and struts in fencing including cutting tops to shape directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410-W Gde E-250 Quality-A with and including including power drilling, cleaning of holes by air pressure then fastner/nut & bolts should be inserted in holes that should be filled with epoxy to ensure the bond as per manufacturer recommendation complete all as specified and directed. (Note : Work will be carried out upto 8 mtr height as per direction of Engr-in-Charge and all fabrication materials including fastner/nuts & bolts to be measured in kg).

M&L for preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F in repair 4.5mm thick hollow polycarbonate wall sheets in required shape, size and colour fixed with coach screw/self tapping screw and washer with iron frame work of fencing etc.complete all as specified and directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 in two layers, 5mm thick in CM (1:4) over a coat of 10mm thick in CM (1:4) when surface of green and finishing with and including mixing of liquid WPC of approved make @ 200ml per bag of cement/manufacturer's instructions on brick/concrete wall surfaces of any description, and finishing the surfaces even and fair complete all as specified and directed.

M&L for preparing surfaces newly plastered or unplastered surfaces of walls and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete all as specified and directed.

M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces wwith and including complete removal of existing treatment of any layer of wall and preparing complete all as specified and directed.

S&F galvanised 600mm dia concertina coil with mechanically crimped punched blades include the core wire diameter and material (e.g. 2.5mm or 3.5mm high carbon steel), the punched tape width (e.g. 19mm) and blade spacing (e.g. 35mm) etc having approx 50 nos rounds per 6 metre length for security fencing complete all as specified and directed.