REPAIR MAINT OF 05 MW SOLAR PLANT AND MISC ITEMS UNDER GE MCTE MHOW

Amount

Supply & fix LED in repair security light fitting 35 W housing made out of die case aluminium alloy with toughed glass, IP 65 protection having clamp for mounting on wall working on 240 V AC 50 HZ, 18 Watts consisting of reflective lenz, wired with appropriate driver PF>0.98 having over voltage protection up to 400 volts, surge protection level 7-10 KV, thermal short circuit protection THD<10% made up of long life LED chips (SMD) in modular with Ra>70 and LED lumen efficiency > 120 lumen per watt, make Cree/Osram spread (Beam angle along the driveway, 175 degree through (beam angle across the drive way) 75 degree including fixed on pole with 02 Nos MS clamp made of 40x6 mm Fl and bracket amde of 40 mm FI and bracket made of 40mm dia light grade GI pipe bend to shape, not less than 1.2 m long including connecting with 03 core PVC insulated copper conductor cable 1100 V grade of size 1.5 sq mm from junction box to fitting complete.

Sub main wiring of size 2 x 4 Sqmm (Ph&N) & 1 X 2.5 Sqmm (Earth), PVC Insulated unsheathed stranded FRLS copper conductors for three phase & Neutral suuply and 1 Run of Earth coninuity, conductor (Green), drawn in and including concealed rigid non mattalic PVC conduit medium grade (ISI Marked) with all fittings complete all as specified and directed.

S & F copper wire 4 sq mm 2 core for connecting of pump for panel board, complete all as specified and directed.

Supply, laying, jointing & testing in repair XLPE insulated bedded galvanized steel strip armoured electric cable heavy duty with stranded aluminium conductor 1100 volts grade cross sectional area 25 Sqmm 4 Core, lugs including cable glands laid in trenches or passing through pipe or fixed on poles complete all as specified and directed.

COMBANE BOX WITH STRING MONITORING UNIT (16 I/P DC & O/G DC) :- S&F in repair combiner box shall be provided on the DC power from the strings, string Monitiring units shall be provided for monitoring the DC power generation abd other parameters at each string level using Shunt Based Monitoring Device. The Array Combiner box with String Monitoring unit shall be integrated into a singlr box enclosure as intelligent combiner box.

Supply, laying testing and commissiong of solar cables in repair size cross sactional area 185 sqmm Copper Conductor single core weather resistant, resistant to mineral oils, Resistant to acids ad alkalines ambient Temprature - 40 degree celcius to +90degree celcius Max Temprature at conductore 120degree celcius (20000h), short Circuit Temp Celcius for 5Sec Max, Thermal endurance Test according to EN 60216-2 (temprature indax + 1200Degree celcius), high temp Pressure Test according to EN 60811-3-1, Damp Hoat Test according to EN 60068-2-78, 1000hrs at 90degree celciuus with 85% humidity rated voltage : 0.6/1KV AC, Rated DC Voltage, 1.5kV, Maximum Permitted DC Voltage 1.8kV, working voltage : 1000VDC, insulation Resistance 1000MW-Km, Minimum bending Radius 4times tge diameter, safepulling force 50N/sqmm, Ozone resistance as per EN 50396 part 8.1.3. Note : Quoted rates includes the cost of labour for End termination of cable with required size if MC4 Connectors or specified size of Connectors. Make : LAPP/LEONI/SIECHEM/FINOLEX/KEI/RAVIN

Supply, laying testing and commissiong of solar cables in repair size cross sactional area 50 sqmm Copper Conductor single core weather resistant, resistant to mineral oils, Resistant to acids ad alkalines ambient Temprature - 40 degree celcius to +90degree celcius Max Temprature at conductore 120degree celcius (20000h), short Circuit Temp Celcius for 5Sec Max, Thermal endurance Test according to EN 60216-2 (temprature indax + 1200Degree celcius), high temp Pressure Test according to EN 60811-3-1, Damp Hoat Test according to EN 60068-2-78, 1000hrs at 90degree celciuus with 85% humidity rated voltage : 0.6/1KV AC, Rated DC Voltage, 1.5kV, Maximum Permitted DC Voltage 1.8kV, working voltage : 1000VDC, insulation Resistance 1000MW-Km, Minimum bending Radius 4times tge diameter, safepulling force 50N/sqmm, Ozone resistance as per EN 50396 part 8.1.3. Note : Quoted rates includes the cost of labour for End termination of cable with required size if MC4 Connectors or specified size of Connectors. Make : LAPP/LEONI/SIECHEM/FINOLEX/KEI/RAVIN

Supply and laying & testing and charging in repair LT UG cable XLPE insulated armoured heavy duty 1100 Volt grade multi starnded copper conductor Cable as Indian Standard IEC 60189 : IS 694/IS1554/IS/IEC69948 Copper Conductor Cables 2 Core X 4 Sqmm Armoured complete all as specified and directed.

Supply and laying & testing and chargingin repair LT UG cable XLPE insulated armoured heavy duty 1100 Volt grade multi starnded copper conductor Cable as Indian Standard IEC 60189 : IS 694/IS1554/IS/IEC69948 Copper Conductor Cables 3 Core X 2.5 Sqmm Armoured complete all as specified and directed.

Supply and laying & testing and charging LT UG cable XLPE insulated armoured heavy duty 1100 Volt grade multi starnded copper conductor Cable as Indian Standard IEC 60189 : IS 694/IS1554/IS/IEC69948 Copper Conductor Cables 4 Core X 2.5 Sqmm Armoured complete all as specified and directed.

Supply and laying & testing and charging LT UG cable XLPE insulated armoured heavy duty 1100 Volt grade multi starnded copper conductor Cable as Indian Standard IEC 60189 : IS 694/IS1554/IS/IEC69948 Copper Conductor Cables 12 Core X 1.5 Sqmm Armoured complete all as specified and directed.

Supply and laying & testing and charging LT UG cable in repair XLPE insulated armoured heavy duty 1100 Volt grade multi starnded copper conductor Cable as Indian Standard IEC 60189 : IS 694/IS1554/IS/IEC69948 Copper Conductor Cables 12 Core X 2.5 Sqmm Armoured complete all as specified and directed.

Supply and laying of HDPE DWC pipe of various colour along with necessary joints and fittings suitable for string circuit buried below the ground of size 50 mm dia. Note : Excavation and return filling will be measured and paid seperately, all as per BIS 14930 BSEN 50086 Make Tirupati/Gemini /Duraline/ Avadh polymes/ King Indore

Supply Installation, Testing and commissioning in repair of triple pole, gang operated, air break off load Isolator double break horizontal operated switch double stack consists of galavanised steel base HT Insulator as per BSS/IS, non ferrous, non ferrous knife and spring loaded arcing horn of adequate section to break magnetizing current of the transformer, horizontal GI pipe/ MS square rod of suitable length sepration adequate length of medium grade GI pipe fixed vertically for operation from ground level in both OFF and ON postion and having all ferrous parts hot dipped galvanised suitable for current rating upto 400 Amps, 33000 Volts, 50 Hz complete all as specified and directed. Make : Jaipuriya Brothers/ Atlas

Supply and fix of 33kV Brown glazed pocelain Pin insulator confirming to IS 731/1971 amendment to 1 to 5 Type B with 320mm minimum cerrpage distance and with zinc/lead thimble suitable for use with GI Forged Pin having small steel heads as per IS 2486/ 1993 and latest amendments. Make : Jaipuriya Brothers/ Atlas

Supply and fixing PG clamp universal type made out of aluminium alloy, with brass nut-bolts and washers etc for connecting of 33 KV bus bar as required at site complete all as specified and directed

M & L for earthing with Galvanized steel earth plate electromade 600 mm x 6 mm thick buried directely in ground (earth pit not less than 2.25 M deep below normal GL) with top edge of the plate not less than 1.5 M below GL connected to GI earth strip of size 32x6 mm connected to earth plate electrode by means of GI nuts, bolts & washers earth wire protected with & including 40 mm bore medium grade ISI marked GI pipe not less than 2.5 meter length and connected to transformer/ LT panel all as shown in Electrical Plate No 3 of MES Sch, part I, with including PCC 1:3:6 type C-1 using 20mm graded stone aggression as in pt and RCC 1:2:4 B1 using20 mm graded stone affrogates reinfirced with welded steel wire fabric not less than 4 Kg per sq M, watering arrangements with 20 mm GI medium grade pipe ISI marked, GI funnel with GI mesh, filling alternate layers common salt & charcoal necessary exacavation amd earth work in any type of soil, including test point, testing & commissioning complete all as specified and directed.

Supply Installation, Testing and commissioning in repair of36Watt LED stand alone Solar Street Lighting system suitable for outdoor application consisting of hot dip Galvanised coate. Octogonal pole 6 Mtrs Long installed on PCC base with the help of sufficient Nos of fastners FRP control gear box mounted on the pole, necessary control cables charge controller, Battery 120AH, Tabular, connecting wires, multi crystalline solar panel 120 VA, street light luminaires 24W LED, Die cast aluminium frame with heat resistant thoughened clear glass IP65 class protection including necessary civil work erection of pole which includes exacavation upto 1mtr deep PCC 1:3:6 type C-2 for foundation of size 0.6mtr x 0.6 mtrx 1.0 mtr including fastner bolt etc complete all as per instructions of maunfacturer, having Tech features as specified below, including all other necessary work not specified above but required at site for proper and effiecient functioning of solar street lighting system and directed at site Cat No SSLSZ24W of Shakti or equivalent of Tata Solar BP/Crompton/Birla Power/ Osram/Wipro Philips/GE

Dismantling re-errecting,restringing tensioning and repair to overhead line ACSR conductor any size upto 5 conductor in one span as required on poles LT / HT including fixing insulators and jointing with ACSR conductor complete all as specified and directed.

M & L for painting to steel tubular swaged pole of HT 11 KV overhead lines (11 Mtr long) complete with and including comprising the following works :- (a) Scraping out wornout old paint and making the surface smooth. (b) Painting the pole and all MS work mounted on pole with two coats of post office red colour synthetic enameled paint on upper portion and two coats of aluminium paint in lower portion as directed by Engg.-in-charge. (c) Forming coloured bands with white and red post office colour synthetic enameled paint at bottom and letter writing or numbering complete all as specified.

Supply and fix , testing cable jointing kit for 33kv grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core xlpe armoured aluminium conductor cable of size 300 sqmm complete.

Repairing of existing unserviceable PCC coping of LT/HT pole by breaking completely and material and labour for PCC 1:2:4 type B1,20mm graded stone aggregate of size 600mm X 600mm X 300mm including form work and plastering and two coat of white wash complete all as specified and directed.

S R BUILDERS AND SUPPLIERS