Repairs, polishing and painting of wooden and steel furniture and conversion of charpoy GI Pipe nylon newar to charpoy GI ply top at BSO(S) Ahmednagar under GE(S) Ahmednagar

Amount

Dismantling / taking down / cutting of existing unserviceable newar from GI pipe charpoy and reweaving with and including superior quality nylon newar 50 mm to 55 mm wide white colour of weight not less than 1.50 Kg per charpoy and shall be closely woven both ways(both top and bottom layer of charpoy) including tightening the elbows etc in the true position complete all as specified and shown on drawing, Make -unserviceableha or Komal as approved by GE/Engineer-in-charge before incorporating in the work. FD- 220

Long Rail : Removing of unserviceable long rail of charpoy GI pipe and supplying and fixing of new long rail made out from 32 mm dia GI tubing medium grade of shape and size 1900 mm long as per existing long rail of charpoy GI pipe including threading upto 22 mm on both sides complete all as specified and shown on drawing ( MAKE:TATA / JINDAL / Zenith). FD- 220

Removing unsrviceable long rail and converting broken long rails retrieved in replacement of 7.00 here-in-before into two short rails of size 820 mm long threading both ends, one side up to 22 mm and another end up to 44 mm and fixing in charpoy GI pipe including taking out old unserviceable short rail from the existing GI charpoy frame complete all as specified and as directed shown on drawings & as directed by the Engineer-in-Charge. FD- 220

Removing of unserviceable short rails of GI Charpoy and converting the same into two legs including cutting, threding at one end and another side new 3 mm thick MS sheet to be welded on base and mild steel bracket in 2 Nos of required size and shape to be welded for MNF set duly painting with synthetic enemal black paint as specified on drawing and as directed. FD-220

Removing unserviceable check nut of GI charpoy and supply and fix new check nut 32mm dia all as directed . FD- 220

Replacement of out old unserviceable / broken elbow from the existing GI charpoy frame and providing GI elbow 3 way duly threaded (ISI marked) weight not less than 450 gms suitable for 32 mm dia GI pipe charpoy complete all as shown on drawings and as directed by the Engineer-in-Charge. FD- 220

Removing of unserviceable nylon newar from charpoy GI pipe and providing commercial plywood of size 1980 mm x 900 mm x 12 mm thick BWR grade making (Kitply, Greenply or Archid plywood) with 06 Nos nut with bolt of 6 mm dia 60 mm long to be unserviceableed for fixing of plywood top including drilling holes and following arrangement completed all as specified as directed by Engr-in-charge, 3 Nos 25 mm square MS hollow tube 16 guage wall thickness of length not less than 83.6 cms each welded with fillet weld all around 3 mm thick to long rails of GI pipe Charpoy at equal space to support plywood all as directed Note : (i) All steel sections except GI articles and adjoining surfaces of GI pipe which shall be degalvanised during welding of MS hollow pipe shall be painted with two coats of synthetic enamel paint black over coat of red oxide primer. (ii) All the corners of plywood shall be rounded same as per shape of corner elbows of charpoy. (iii) The top of bolt (Head) for fixing of plywood shall be flunserviceablehed with ply top & finished with suitable fitting. (iv) Legs of the charpoy to be welded with 3 mm thick 50 mm dia MS circular plate duly painted with two coats of synthetic enamel paint black over coat of red oxide primer. FD- 220

Removing unserviceable Square tube from Table dining ORs, Table clerk steel and Table office officer steel and providing new square tube complete all as directed by Engineer-in-charge. FD 165

Removing unserciceable top from Table Dining OR's and providing new Top made out of 18/19mm Particle Board incl cover of 22 mm guage aluminium sheet as shown on drawing and as directed by Engineer-in-charge. FD-165M

Removing unserviceable wooden parts from chair wooden bottom and providing new wooden parts made out of Ist class hard wood teak (MP) free from knots,cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete all as specified and diercted.

Rear legs . FD-56, FD-225, FD-285

Front legs. FD-56, FD-225, FD-285

Front/side rails. FD-56, FD-225, FD-285

Stiffners. FD-56, FD-225, FD-285

Removing unserviceable wooden parts from chair dining and supply and fix new wooden parts made out of Ist class hard wood teak(MP) free from knots,cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete all as shown on drawing and as directed by Engineer-in-charge.

Rear legs. FD-279/228/16M

Front legs. FD-279/228/16M

Rear/front/side rails. FD-279/228/16M

Stiffners. FD-279/228/16M

Back rest. FD-279/228/16M

Removing unserviceable wooden parts from chair writing and supply and fix new wooden parts made out of Ist class hard wood teak(MP) free from knots,cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete all as shown on drawing and as directed by Engineer-in-charge.

Rear legs. FD- 280, FD-250

Front legs. FD- 280, FD-250

Rear/front/side rails/including cane hole. FD- 280, FD-250

Stiffners. FD- 280, FD-250

Back rest. FD- 280, FD-250

Arms rest. FD- 280, FD-250

Removing unserviceable wooden parts from chair easy and supply and fix new wooden parts made out of Ist class hard wood teak(MP) free from knots,cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete all as shown on drawing and as directed by Engineer-in-charge.

Rear legs. FD- 229, FD-17

Front/rear/rails including cane holes. FD- 229, FD-17

Side rails for seat including cane holes. FD- 229, FD-17

Front /rear/stiffeners. FD- 229, FD-17

Side rails for back rest including cane hole. FD- 229, FD-17

Upper /lower rails for back rest including cane. FD- 229, FD-17

Arms rest. FD- 229, FD-17

Removing unserviceable plastic cane from chairs dining, Chair writing, Chair easy, Bin soil linen and stool dressing and recaning with new plastic cane 2 mm wide white oval type plastic cane and bordering with 3 mm wide plastic cane weaving as per Godrej pattern complete all as specified on drawing and as directed. Make of cane Komal or equivalent. FD- 279, 244,228,280,229,27M

Removing unserviceable plywood from chair wooden bottom without arms and supply and fix new plywood seat 6 mm thick commercial ply to the existing chair WB without arms duly french polished complete all as shown on drawings and as directed by Engineer-in-charge. FD-56, FD-225, FD-285

Removing unserviceable wooden parts from chair easy and supply and fix new wooden parts made out of Ist class hard wood teak(MP) free from knots,cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete all as shown on drawings and as directed by Engineer-in-charge.

Legs for table dining 6/8 pers. FD-30,FD-273,FD-239

Front/rear rails of table dining 6/8 pers. FD-30,FD-273,FD-239

Side rails for table dining 6/8 pers. FD-30,FD-273,FD-239

Centre rails of table dining 6/8 persons. FD-30,FD-273,FD-239

Leg of table 3'x2' without with drawer. FD-283, 231, FD-284

Front/rear rails of table 3'x2' without with drawers. FD-283, 231, FD-284

Side rails of table 3'x2' without with drawers. FD-283, 231, FD-284

Drawers of Table 3'x2'. FD-283, 231, FD-284

Front /rear top/bottom rails of table writing. FD 249, FD-275

Legs of table writing. FD 249, FD-275

Stiffeners of table writing. FD 249, FD-275

Side rails of table writing. FD 249, FD-275

Legs of table centre. FD-29, FD-335, FD-274

Front/rear rails of table centre. FD-29, FD-335, FD-274

Stiffeners of table centre. FD-29, FD-335, FD-274

Bottom rails for table centre. FD-29, FD-335, FD-274

Legs of table 2' x 2'. FD- 95M, DB-4085

Front/rear/side rail of table 2 x 2. FD- 95M, DB-4085

Leg of table 3 x 3. FD-88M

Front/rear/side rails of table 3 x 3. FD-88M

Legs of Table dining 4x3. FD-273

Side rails of Table dining 4x3. FD-273

Legs of peg table. FD-25,FD-236, FD-277

Bottom rail of peg table. FD-25,FD-236, FD-277

Top rail of peg table. FD-25,FD-236, FD-277

Leg of teapoy. FD-34, FD-232, FD-225

Top rail of teapoy. FD-34, FD-232, FD-225

Bottom rail of teapoy. FD-34, FD-232, FD-225

Removing unserviceable wooden parts from sofa set and supply and fix new wooden parts made out of Ist class hard wood teak(MP) free from knots,cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete all as shown on drawings and as directed by Engineer-in-charge.

Legs of sofa chairs 70 x 35 x 30MM. FD-281,FD-373

Arms rest of sofa chairs 70X35X725MM. FD-281,FD-373

Wooden bearer 40X40X670MM. FD-281,FD-373

Wooden batten 50X20X670MM. FD-281,FD-373

Wooden rails 35X100X670MM. FD-281,FD-373

Wooden frame for head 70X35X600MM. FD-281,FD-373

Wooden rails to support back frame 30X50X670 mm. FD-281,FD-373

Wooden bearer 40X40X1730 mm. FD-281,FD-373

Wooden rail 35X100X1730 mm. FD-281,FD-373

Wooden frame for back 70X35X1660 mm. FD-281,FD-373

Removing unserviceable wooden parts from Bed hard and supply and fix new wooden parts made out of Ist class hard wood teak(MP) free from knots,cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete all as shown on drawings and as directed by Engineer-in-charge.

Short rails of bed hard. FD-246

Long rails of bed hard. FD-246

Stiffners of bed hard. FD-246

Front leg of bed hard. FD-246

Rear legs of bed hard. FD-246

Removing old unserviceable head rest from the bed hard/bed newar made out of 1st class hard wood made to shape and dimensions complete all as shown on drawings and as directed by Engineer-in-charge. FD-246,245

Removing old unserviceable foot rest from the bed hard/bed newar made out of 1st class hard wood made to shape and dimensions complete all as shown on drawings and as directed by Engineer-in-charge. FD-246,245

Removing of unserviceable plywood from bed hard and providing new ply wood 12 mm thick commercial fixed to shape and dimensions complete all as shown on drawings and as directed by Engineer-in-charge. Make-Kitply/Green ply/Archid/Century. FD-246,245

Removing unserviceable drawer from the table dressing gents and providing new drawer made out of 19/18 mm thick prelaminated particle board as per drg and applying french polish complete all as shown on drawings and as directed by Engineer-in-charge. FD-230

Removing unserviceable top frame of table dressing gents and providing new top frame to the existing table dressing gents and applying french polish as reqd complete all as shown on drawings and as directed by Engineer-in-charge. FD-230

Removing unserviceable looking mirrior with frame from the table dressing Gents and providing new mirrior with frame to the existing table dressing gents with mirror and applying french polish as reqd ocomplete all as shown on drawings and as directed by Engineer-in-charge. Make of the Mirror Modi Guard/ Saint Gobain. FD-230

Removing unserviceable Knob from table dressing gents and providing new Knob of approved quality complete all as directed. FD-230

Removing unserviceable drawer from the table dressing ladies and providing new drawer made out of 19/18mm thick prelaminated particle board complete all as shown on drawings and as directed by Engineer-in-charge. FD-251, FD-32

Removing unserviceable top frame of table dressing ladies and providing new top frame to the existing table dressing ladies duly french polished as reqd complete all as shown on drawings and as directed by Engineer-in-charge. FD-251, FD-32

Removing frame with Mirror of the table dressing ladies and providing new frame with Mirror to the existing table dressing ladies duly french polised complete all as shown on drawings and as directed by Engineer-in-charge. Make of mirror Modiguard. FD-251, FD-32

Removing unserviceable back base ply from table dressing ladies with mirror and providing new back base ply to the existing Table dressing ladies with mirror duly french polished as reqd complete all as shown on drawings and as directed by Engineer-in-charge. Make of mirror Modiguard/ Saint Gobain. FD-251, FD-32

Removing broken unserviceable sliding glass shutter and alumn channel and providing new glass shutter and alumn channel to the existing table dressing ladies. FD-251, FD-32

Removing unserviceable back from Side Board and providing new 6mm thick plywood commercial of same size duly french polished as reqd complete all as shown on drawings and as directed by Engineer-in-charge. FD-241,FD-26

Removing unserviceable drawers from Side Board and providing new drawers made out of 12mm commercial plywood of same size and applying french polish as reqd complete all as shown on drawings and as directed by Engineer-in-charge. FD-241,FD-26

Removing unserviceable door shutter from Side Board and providing new door shutter of 18/19mm thick prelaminated particle board one side teak face and other side white teak wood beading all around complete all as shown on drawings and as directed by Engineer-in-charge. FD-241,FD-26

Removing unserviceable Knob from Side board and providing new knob with suitable screws complete all as directed by Engr-in-charge. FD-241,FD-26

Removing unserviceable top from side board and providing new top of size 19/18mm thick prelaminated particle board one side teak face and other side white complete all as shown on drawings and as directed by Engineer-in-charge. FD-241,FD-26

Removing unserviceable legs from table dressing ladies and providing new legs made out of 1st class hard wood Indian teak wood duly french polished as reqd complete all as shown on drawings and as directed by Engineer-in-charge. FD-251

Material and labour for spot welding of steel furniture items of broken joints etc, not exceeding 2.5cm in length and thickness 6mm including scraping, preparing the surface of welded portion by grinding and buffing to make fit for painting and applying two coats of synthetic enamel paint over a coat of red oxide on welded portion by sprayer complete . Make of paint shall be Apcolite by Asian paints or equivalent in Make Nerolac. FD-67, 75(M), 81,84(M), 256, 258, 359,1003, 1004, 1007, 1008, 1009, 1012, 1027, 1031, 1032

Removing the unserviceable tops from the following tables and providing new tops made out of 18/19 mm thick prelaminated particle board, one side teak finish and other side balancing white and fixing the same with the existing tables with suitable screws including 6 mm thick teakwood beading all around to the tops duly french polished complete all as shown on drawings and as directed by Engineer-in-charge. :-

Table writing. FD 249, FD-275

Table centre. FD-29, FD-335, FD-274

Top for teapoy verandah. FD-35, FD-255

Table 600X600 MM. FD- 95M, DB-4085

Table 3'X3'. FD-88M

Table dining 4'x3'. FD-273

Table peg. FD-25,FD-236, FD-277

Teapoy. FD-34, FD-232, FD-225

Table dining 6 persons. FD-30,FD-273,FD-239

Table dining 8 person. FD-30,FD-273,FD-239

Table 3'X2' without & with drawer. FD-283, 231, FD-284

Removing unserviceable Hasp and staple 75 mm chromium plated and fixing to steel shutter of locker bed side steel with suitable rivet/nut and bolt screw all as specificied and directed. FD-1029, FD-257

Removing unserviceable CP Handle from locker bedside & providing new CP handle 100 mm and fixing with suitable screw /bolt to shutter complete all as specificied and directed. FD-1029, FD-257

Removing unserviceable hinges from locker bedside and providing new hinges with suitable welding complete all as specificied and directed. FD-1029, FD-257

Removing unserviceable legs from locker bed side and providing new legs made out of 1.00 mm thick black sheet and fixing to locker bedside steel with suitable welding the legs shall be painted with one coat of red oxide primer and two coats of synthetic enameled paint with match the existing complete all as shown on drawings and as directed. FD-1029, FD-257

Removing unserviceable shutter of locker bedside and providing new shutter to locker bedside steel and painted with two coats of synthetic enamel paint over a coat of red oxide primer to match with existing paint complete all as shown on drawings and as directed. FD-1029, FD-257

Removing unserviceable conduit pipe and providing new 20 mm mild steel conduit pipe with socket to locker bed side steel complete all as shown on drawings and as directed. FD-1029, FD-257

Removing unserviceable handle and providing new handle for Almirah large steel and Almirah med steel with shelves complete all as shown on drawings and as directed. FD-75, FD-243, FD-1031

Removing unserviceable locking device of Almirah large steel with shelves and Almirah med with shelves and providing new locking device including cover of MS sheet made to shape complete all as shown on drawings and as directed. FD-75, FD-243, FD-1031

Removing unserviceable lock from Almirah large steel with shelves and providing new Godrej or equivalent lock with duplicate keys complete all as shown on drawings and as directed. FD-75, FD-243, FD-1031

Removing unserviceable shelves from Almirah large steel with shelves and providing new shelves for Almirah large steel with shelves made out of 1.00 mm thick plain black sheet duly painted with two coats of synthetic enamel paint over a coat of red oxide primer to match with existing paint complete all as shown on drawings and as directed. FD-75, FD-243, FD-1031

Removing unserviceable legs from Almirah large steel with shelves and Almirah med steel with shelves and providing new legs made out 0f 1.00 mm thick plain black sheet duly painted with two coats of synthetic enamel paint over a coat of red oxide primer to match with existing paint complete all as shown on drawings and as directed. FD-1032,243

Removing unserviceable clips and providing new clips to shelves of Almirah large steel with shelves and med steel with shelves complete all as shown on drawing and as directed by Engr-in-charge. FD-1032,243

Removing unserviceable locks from table office clerk and table office officer steel and providing new locks to complete all as directed. FD-1003,1004

Removing unserviceable hand rest from chair CB steel with arms and providing new hand rest made out of 1st class hard wood Indian teak wood to the existing chairs CB steel with arms complete all as shown in drawing and as directed. FD- 75M

Removing unserviceable seat & back from chair CB steel with arms and supply and fix new seat and back for chair CB steel with arms duly painted with two coats of synthetic enamel paint over a coat of red oxide primer to match with existing paint complete all as shown on drawings and as directed.for following :-

Seat of chair CB steel with arms. FD-75M

Back of chair CB steel with arms. FD-75M

Removing unserviceable seat & back from chair CB steel without arms and supply and fix new seat and back for chair CB steel without arms duly painted with two coats of synthetic enamel paint over a coat of red oxide primer to match with existing paint complete all as shown on drawings and as directed.for following :-

Seat of chair CB steel W/O arms. FD-75M

Back of chair CB steel W/O arms. FD-75M

Removing old unserviceable seat from chair CBA special and providing new seat made out of 1st class hard wood Indian teak wood duly canned with 2 mm thick plastic cane as per existing complete all as directed. FD- 75M

Removing old unserviceable back of chair CBA special and providing new back of chair made out of 1st class hard wood Indian teak wood duly canned with 2 mm thick plastic cane as per existing complete all as directed. FD- 75M

Removing unserviceable seat and back in one piece made out of PVC and providing with suitable nut bolt/screw to the existing PVC seat & back in one piece (Make- Supreme/Cello/Polyset or Blowplast and as directed. FD/E6/MAP-05

Removing unserviceable prelaminated particle board top 18 mm thick openable and providing with suitable hinges & screws on right hand side to 25 mm mild steel pipe inserted in 20 mm dia rod welded to frame complete all as directed. FD/E6/MAP-05

Removing unserviceable hand rest from chair CBA spl with hand rest made out of 1st class hard wood Indian teak wood as per size shown on drawing duly polished complete all as specified and directed by Engr-in- charge. FD- 75M

Removing existing unserviceable plastic cane/nylon newar, repairing the broken/damaged conduit pipe of seat & back or whatever required by welding,scrapping cleaning of frame of chair Verandah and painting the same with one coat of synthetic enamel white paint and recanning the chair with 3 mm plastic cane of Make Maharashtra or equivalent and providing with 4 Nos. PVC shoes to legs complete all specified and directed. FD-19M, 256

Removing unserviceable planks from form without back and providing new plank made out of 1” class Indian teak wood to the existing form without back complete all as shown in drawing and as directed. FD-77

Removing unserviceable seat/back from sofa set five, four or three seater and providing new 100 mm thick cushion of 32 density foam including tapestry cloth cover duly stiched including provn of Zip at one side of cover , Note- Tapestry cloth shall not be less than Rs 250/- per metre and shall be of Make: Bombay Dyeing/Reymond furnishing/D`Decor. Colour of cloth will be approved by Engineer-in charge, Make of foam Sleepwell(Primo)/ Kurlon(Goldline). FD-77

Removing unserviceable tapestry cloth from the existing sofa foam cushion and providing new cushion cover out of good quality tapestry cloth of rate not less than Rs 250/ per mtrs and as per sample approved by Engineer-in-charge including provn of Zip at one side of cover complete all as specified in drawing.Make: Bombay Dyeing/Reymond furnishing/D`Decor. FD-281, FD-373

Removing unserviceable cushion foam leather from seat of chair easy cushioned and providing new cushioned seat made of good fibre foam leather and fixing with the existing chair easy complete all as specified and directed. FD-281, FD-373

Removing unserviceable cushion foam leather from back of chair easy cushioned and providing new cushioned back made of good fibre foam leather and fixing with the existing chair easy complete all as specified and diercted. FD-358

Removing unserviceable cushion foam leather from back of chair CB steel with arms arms and providing new cushioned back made of good fibre foam leather and fixing with the existing chair steel with arms complete all as specified and dierected. FD-75M,TP1254

Removing unserviceable cushion foam leather from seat of chair CB steel with arms arms and providing new cushioned seat made by good fibre foam leather and fixing with the existing chair steel with arms complete all as specified and directed. FD-75M,TP1254

Removing unserviceable frame of square tube form without back and providing new square tube wherever required to existing form without back with suitable welding complete all as shown on drawing and as diercted. FD-77M

Preparation of surfaces and painting to the frame of form without back with one coat of synthetic enmal paint black complete all as directed by Engineer-in-charge. FD-77M

Removing dents of following steel furniture articles including removing bends and preparation of surfaces for painting including putty work to smoothening the surfaces and painting complete as directed by Engr-in- charge. (Make of paint shall be Asian/Berger/Nerolac) Note- colour of paint will be approved by Engineer-in-charge :-

Almirah large steel with shelves. FD-67, FD-243

Almirah med/small with shelves. FD-243, FD-1032

Locker bed side steel. FD-1029, FD-257

Table with drawer steel. FD-1008

Table office clerk steel. FD-1004

Table office officer steel. FD-1003

Table dining ORs. FD-165M

Chair CB steel with arms. FD-75M

Chair CB steel without arms. FD-75M

Chair verandah steel with white paint. FD-256

Chair CBA special. FD-75M

Preparation of surfaces of the following wooden furniture and applying melamine polish by Asian paints/Nerolac/Berger paints stricty as per manufactures instructions. Note- Colour of polish will be as approved by Engineer-in-charge

Book shelf open small. DB-4121

Book shelf open large. DB-4121

Bed hard with ply top. FD-246

Chair WB without arms. FD-56, FD-225, FD-285

Chair writing. FD- 280, FD-250

Chair dining. FD-279/228/16M

Chair easy. FD- 229, FD-17

Sofa set 4 seater. FD-281,FD-373

Sofa set 5 seater. FD-281,FD-373

Table centre. FD-29, FD-335, FD-274

Table peg. FD-25,FD-236, FD-277

Table dining 6 person. FD-30,FD-273,FD-239

Teapoy. FD-34, FD-232, FD-225

Table bed side. FD-248

Table dressing Gents with mirror. FD-230

Table dressing ladies with mirror. FD-251, FD-32

Table writing. FD 249, FD-275

Table dining 8 pers. FD-30,FD-273,FD-239

Bin soil linen. FD-244

Side board. FD-241

Stool dressing CB. FD-282

Table card. FD-91

JAI BHARAT ENTERPRISES

Mahesh Traders

KASTURILAL HARICHAND OHRI AND SONS