Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.1 LAccepted-AOC 1010 NANDANPURA BABINA CANTT DIST JHANSI 284401 | BABINA CANTT | JHANSI | UTTAR PRADESH | 284401 | L1 | Accepted-AOC Being a L1 bidder | |
| 2 | L2₹34.8 L+₹42,302.05 (1.23%)Rejected-Finance | L2 | Rejected-Finance Not being a
lowest
tenderer | |
| 3 | L3₹38.3 L+₹3.9 L (11.4%)Rejected-Finance 763 MAIN ROAD BABINA CANTT JHANSI UP 284401 | JHANSI | JHANSI | UTTAR PRADESH | 284401 | L3 | Rejected-Finance Not being a
lowest
tenderer | |
| 4 | L4₹39.0 L+₹4.6 L (13.4%)Rejected-Finance | L4 | Rejected-Finance Not being a
lowest
tenderer |
Tender Value
₹41 L
EMD Value
₹82,000
Closing Date
30 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE BABINA
GE BABINA CANTT 284401
CERATAIN MISC SANCTION WORK AT AGE B/R-I AND AGE E/M UNDER GE BABINA
2022_MES_549276_1
GE/BAB/TOKEN/25 OF 2022-2023
Open Tender
Civil Works
Item Rate
180 days
GE BABINA
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE BABINA
₹82,000
Yes
11 Nov 2022
1 Sept 2022
7 Oct 2022
1 Sept 2022
30 Sept 2022
16 Sept 2022
Amount
Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1,5 mtrs in depth for laying of pipe including getting out in soft/loose soil complete all as specified and directed. (cable shall be laid 60 cm below ground level ) complete all as specified and as directed.
Returning, filling in including spreading, leveling , watering and well ramming, in layers not exceeding 25 cm each layer of any kind of soil complete all as specified and as directed.
Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point complete all as specified and as directed.
Demolition of PCC/lime concrete terracing including felt in any description and in any position over roof etc complete all as specified and directed by Engineer-in- Charge.
M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in padding over roof finished and laid to required slope complete all as specified and as directed.
Cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.
M&L for 10 mm thick rendering in cement mortar 1:4 on concrete surfaces when concrete is still green, finish even and fair including mixing of water proofing compound as per manufacturer instruction etc complete all as specified and as directed. Note :- Water proofing compound shall be measured separately as supply only.
Supply only Liquid water proofing compound complete all as specified and as directed of as per manufacturer instruction.
M&L applying water proofing treatment with the following (a) First coat of bitumen primer conforming to IS-3384 @ 0.4Kg / sqm (b) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced torched application complete all as specified. (c) 3rd coarse : Third layer of bituminius aluminium paint @ 200Gm/Sqm in two layers, each layer of 100gm/Sqm complete all as specified and directed .
Taking up or down existing steel tubing and connections 15mm dia including cleaning for refixing or removal to store complete all as specified and as directed
Taking up or down existing steel tubing and connections 20mm dia including cleaning for refixing or removal to store complete all as specified and as directed
S & F galvanised steel water tubing medium grade 15 mm bore ( ISI Marked ) with all fittings such as bends, elbow, socket etc laid under floors/trenches or on walls with fixing arrangments complete all as specified and directed.
S & F galvanised steel water tubing medium grade 20 mm bore ( ISI Marked ) with all fittings such as bends, elbow, socket etc laid under floors/trenches or on walls with fixing arrangments complete all as specified and directed.
Fixing only old steel tubing and connections of 15mm dia obtained from taking down against item No 12 herein before in new or old position fixed to wall, ceiling or laid in floor with new fittings complete all as specified and directed.
Fixing only old steel tubing and connections of 20mm dia obtained from taking down against item No 13 herein before in new or old position fixed to wall, ceiling or laid in floor with new fittings complete all as specified and directed.
Cutting cheses, pinning in, making good to facing where required & pointing in CM 1:3 for conc water tubing and like not exc 10CM girth in brick wall complete all as specified and directed.
Dismantling water tanks and removing to store of steel/PVC of capacity exceeding 250 ltr but not exceeding 500 Ltr complete all as specified and directed.
S&F 500 ltr capacity or rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) ISI marked or make specified, two layered construction hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600mm long with fitting including taking down of exisiting unserviceable tank complete all as specified in SSR Part -I complete all as specified and as directed
Fixing only old 500 ltr capacity rotational moulded polythene tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling existing complete all as specified and as directed.
S&F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minium weight 210 gms ), complete all as specified and directed.
S & F in repair 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.
Dismantling, floor,hearth or wall tiling incluiding cement mortar bedding (incluiding backinng coat ) etc complete including removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M&L for non skid coloured joint free ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.18sqm but not exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with floor etc complete all as specified and as directed.
M&L for non skid coloured joint free ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.18 sqm but not exc 0.36 sqm, in Dado/Skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with floor etc complete all as specified and as directed.
M&L for non skid coloured joint free ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.11sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with floor etc complete all as specified and as directed.
M&L for Screed bed or bedding layer of mortar 15 mm thick in CM (1:4) for laying floor finishes or receive tiles etc complete all as specified and as directed.
M&L for 20-25mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick in CM(1:6) etc complete.
M&L for rendering 10mm thick on fair faces of wall or conc surfaces in CM 1:4 finished rough to receive wall tiling etc complete all as specified and as directed
M&L for joint free glazed coloured tiles 300x200x6.7mm thick for work on vertical surface such as skirting, dado, set & jointed in cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exe 1.5 Sqm but n exc 4 Sqm each etc complete all as specified and as directed
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each.
Refixing same opening and shutters of any description exc 1 sqm and n.exc 2 Sqm each complete all as specified and as directed.
S&F solid PVC frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, S&F in opening as per specification & drawing etc complete all as specified and as directed
S&F factory made solid panel PVC door shutter 30mm thick (style) constiting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and palin colour PVC sheet for top rail lock rail & botom rail on either side and as gap insert for top rail bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/selaed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement S&F in the frame at site as per specification & drawing etc complete all as specified and as directed.
S&F aluminum anodized barrel tower bolts of extruded section & fixed 150 mm long etc complete all as specified and as directed
S&F butt hinges extruded aluminium alloy with galvanised mild steel hing pin anodised and fixed type C-21, 100 mm size in toilet with PVC doors etc complete all as specified and as directed
S&F aluminum handles cast type anodized 125 mm size etc complete all as specified and as directed
S & F Aluminum siliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts for on bolts plate and two on staple plate and fixed 300mm long etc complete all as specified and as directed
S&F, Aluminium handles, cast type, anodised 150mm long etc complete all as specified and as directed
S&F locally fabricated plain framed paneled shutter 35 mm thick IInd class HW (any number & Panels) with lock rail and panel of 9 mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both face, the size of rail and style as per IS : 1003 (Part I) kiln seasoned and chemically pressure treated etc complete all as specified and as directed
S&F locally fabricated 35 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.20 (a), divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete all as specified and as directed
S&F galvanized mild steel wire cloth 0.63 mm nominal dia of wire and avg width of a-pertare 1.40 mm fixed with tinned tacks or galvanized wire staples etc complete all as specified and as directed
M&L two coat synthetic enamel paint over one coat of pink primer on new wooden surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed
S&F powder coated aluminium window with double shutters (both gauzed and glazed) with and including alumnium grill and GI wire cloth 0.46mm dia of wire and 1.18mm aperture, fixed on aluminium frame 150 mm x 37.5 mm x1.5 mm thick, shutter with bottom rail, middle rail, top rail and styles of size 44.45 mm x 47.62 mm x 1.2 mm thick as per IS 737-1986 and glazed with tinted glass (Modi guard ) 5 mm thick as per standard practices and with handle, hinge & tower bolt arrangements complete all as specified and as directed.
S&F of CRC sheet box type steel ventilator with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded etc complete all as specified and as directed.
S&F of CRC sheet box type steel ventilator with steel handle, and steel peg stay, complete with out glazing bars, dovetailed or welded etc complete all as specified and as directed
S & F 3 mm thick sheet glass, Ordinary quality and glazing with putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.
S & F 3 mm thick figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided etc complete all as specified and as directed.
S & f of framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doo0rs etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete of Fe-410-W (Gde-E-250) etc complete all as specified and as directed.
S&F, mild steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc complete all as specified and as directed
S&F Pressed steel frames for doors(125x60) mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed etc complete all as specified and as directed.
S&F Pressed steel frames for doors(105x60) mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed etc complete all as specified and as directed.
M&L for cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in CM 1:3 or cement conc 1:2:4 type B1 as required exc half brick but not exc full brick wall complete all as specified and as directed.
M&L PCC 1:3:6 type C-1 (using 20mm graded stone aggt) as in filling in holes of hold fasts and back filling of chowkats etc complete all as specified and as directed.
M & L for secound class hardwood Plain, solid, straight chowkats and frames wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, etc complete all as specified and as directed.
S&F 18/19 mm thick prelaminated particle board interior grade prelaminated one side with decorative choice laminations and other side balancing white lamination fixed with screws to timber frame work etc complete all as specified and as directed.
S&F 12mm thick commercial plywood,grade BWR,typeBB,fixed with screws to timber frame work etc complete all as specified and as directed.
S&F 12/19 mm cover fillet of external teak wood lipping 6mm thick fixed with nail etc complete all as specified and as directed.
S&F Hasp & staple safety type aluminium anodized with mild steel hing pin incl bolt to hing plate and fixed with screws 100mm size etc complete all as specified and as directed.
S & F 40 mm dia., cup board knobs fixed with nut, screw and washer of brass, polished complete all as specified and as directed
S & F continuous (Piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (When open) 30 mm complete all as specified and as directed
M&L for preparing for new steel surfaces and applying two coats of synthetic enamel paint over one coat of red oxide primer over 10 cm width or girth complete all as specified and as directed.
S&F in repair vitreous china squatting pan “ORISSA” pattern size 58X 44 (CM) star white with P or S trap front or back inlet with integral foot rest (excl flushing cistern & flush pipe) & including connection to trap & to flushing pipe anti syphonage pipe etc complete including making good to floor complete all as specified & as directed.
S & F in repair 10 ltrs capacity PVC low level flushing cistern sleek plus single flush of colour star white with inlet, float valve and handle with 32 mm dia PVC pipe 600 mm long complete all as specified and as directed.
S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as specified and as directed
S&F in repairs 15mm dia Concealed stop Cock regular body 15mm with flange complete all as specified and as directed.
S&F in repair angle cock fancy type CP cast copper alloy screwed down high pressure with crutch or buttor fly handle screwed both ends for iron pipe or for unions and fixed 15mm bore etc complete all as specified and as directed.
S&F in repair Bib taps, cast copper alloy, cromium plated with crtuch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm bore etc complete all as specified and as directed.
S&F in repair wash hand basin vitreous china (flat back) any size including cutting for and pinning in ends and CI brackets complete size (550 x 400mm ). Incl waster pipe and waste coupling etc complete all as specified and as directed.
S & F in repair pillar taps 15mm dia cast copper alloy with capstan head chromium plated screwed down high pressure with or without lettered "Hot or Cold" etc complete all as specified and as directed.
S&F in repair swivel shower of CP any colour for fixing with 15mm pipe with shower arm 15mm size, 195mm long with bend of 45 degree with flange of any colour etc complete all as specified and as directed.
S&F in repair Brass cromium plated towel rail 20mm dia, D type, 60cm long between flanges etc complete all as specified and as directed.
S&F in repair CP Brass soap dish fixed to wall with CP brass screws etc complete all as specified and as directed by the Engineer-in-Charge
S&F in repair stainless steel sink with drainage board 1.00mm thick for kitchen or laboretory with plug, waste pipe, coupling, washers also incl cantilever cast iron brackets connecting union etc, overall size 915x460mm with bowl size 410x330x160mm etc complete all as specified and as directed.
S&F in repair stainless steel kitchen plate rack overall size 900mm x 900mm made out of 0.63 mm thick stainless steel sheet etc complete all as specified and as directed.
S&F in repair stainless steel curtain rod of 25 mm dia curtain with stainless steel end knob ,suitable for curtain rod 25 mm dia complete all as specified and directed.
S&F in repair PVC floor trap outlet dia 75mm with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 etc complete all as specified and as directed.
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall 110mm bore incl Stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed
S&F PVC (SWR) bends any radius 110mm bore complete all as specified and directed
S&F PVC (SWR) bends any radius 75mm bore complete all as specified and directed
S&F PVC (SWR) junction single, (single T) equal or unequal 75mm bore with access door complete all as specified and directed
S&F PVC (SWR) junction single, (single T) equal or unequal 110mm bore with access door complete all as specified and directed
S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed
Demoliton of brick work or stone boulder masonry, built in cement mortar as in quins arches, pillers, parapet etc but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed.
M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:4 etc complete all as specified and directed.
Taking down cement plaster on brick or stone wall including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M&L for rendering 10mm thick on fair faces ofbrick wall finish even and smooth without using extra cement on conc/brick surfaces in CM 1:6, complete all as specified and as directed
M&L renderig 5mm thick in cement mortar 1:3 on ceiling surface and finished even and smooth with out using extra cement complete all as specified and as directed.
M&L for rendering 15mm thick on fair faces of wall finish even and smooth without using extra cement on conc/brick surfaces in CM 1:4, complete all as specified and as directed
M & L for preparation of new plastered surfaces and applying three coat of white wash on ceiling complete all as specified and as directed.
M & L for Preparation of new plastered surfaces of wall and applying two coat of oil bound distemper over a coat of putty as per manufacturer instruction complet all as specified and as directed.
M & L for preparation of new plastered surface of wall and applying two coats of cement base paint on external wall surface over a coat of alkali resistant primer complete all as specified and as directed.
Demolition of PCC in ground floor & pavings not exc 15 CM thickness below or above ground level etc complete all as specified and as directed
M&L for 40mm thick PCC 1:2:4 type B1(using 20 mm graded aggregate) as in floor finishing complete etc complete all as specified and as directed
M&L for 75mm thick cement concrete 1:3:6 type C-1, (using 20mm graded aggregate) as in plinth protection finished even and smooth without using extra cement etc complete all as specified and as directed
M&L, PCC 1:4:8 type D2 using 40mm graded stone agg as in filling and mass concrete, Sub base/flooring complete all as specified and directed.
M&L, sand cushioing to under concrete interlocking paver block including watering & consolidation etc complete all as specified and as directed.
M&L 60 mm thick machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658-2006, M-35 grade with grey cement & pigment etc complete all as specified and as directed.
M&L, for PCC 1:2:4 type B-1 using 20mm graded stone agg as in kerb complete all as specified and as directed.
M & L for complete removal of existing treatment of any description from walls and applying two coat of oil bound distemper over a coat of primer over 1 mm thick wall care putty (JK/Birla wall care putty ) including prepration of surfaces as per manufacurers instructions etc complete all as specified and as directed.
M & L for complete removal of existing treatment from walls and appying two coat of cement based paint over a coat of primer over 1 mm thick wall care putty ( JK/Birla wall care putty) including prepration of surface complete all as specified and as directed.
M&L for preparing old plastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed.
M&L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed.
M&L for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed.
S&F Mild steel works as in fillets, posts and struts, balusters, nosing to steps wind ties, purlines, grills, gratings guard bars etc incl securing bolts, necessary drilling, bolting or riveting etc and similar work conforming to 410-0 or Fe 310-0, etc complete all as specified and as directed.
S&F Trussed (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to FE 410-W (Gde E-250) quality etc complete all as specified and as directed.
S & F MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc complete all as specified and as directed.
Excavating in trenches not exc 1.5 m wide and not exc 1.5 deep and getting out in any type of soil complete all as specified and directed.
M & L for Cement concrete 1:2:4 type B2 using 40mm graded stone aggregate in foundations, filling and mass concrete as in post hole etc complete all as specified and as directed.
M&L preparation of steel surfaces over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed
M&L for old size brick work with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in in CM(1:6) etc complete all as specified and as directed.
M&L, rendering 15 mm thick in cement mortar 1: 6 on fair faces of brick work finsh even and smooth without using extra cement complete all as specified and directed.
M&L, Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending for columns, hooking for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L, Mild steel bars 5mm dia & over upto and including 10mm dia, cut to length, bent to shape required, including cranking, bending for columns, hooking for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips as in stirrups complete all as specified and directed.
M&L Reinforced cement concrete design mix M-25 (using 20 mm graded stone aggregates) in beams & columns for Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.
Excavating over areas, n exc 1.5m deep and getting out in any type of soil etc complete all as specified and as directed.
M&L 100 mm thick PCC 1:2:4 type B-1 (Using 20mm graded BT stone aggregate) as in floor finish even and fair without using extra cement, laid in alternate panel complete all as specified and directed
M&L stone sett flooring with stone setts of size 200 to 250mm long, 150 to 200mm wide 150mm deep and sides dressed; bedded in cement mortar 1:3, 20mm thick; joints grouted in cement mortar 1:2 with an admixture of metallic floor hardner, 5% by weight of cement and struck flush etc complete all as specified and as directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc flat, fair finished surface etc complete all as specified and as directed.
M&L PCC 1:1.5:3, type A-1 (using 20mm graded curshed stone aggregate) as in kerb stone/ coping/bed block etc complete all as specified and as directed.
M&L for moorum/red bajri filling in floors or pavings, laid in layers n.exc 15 cm thick, levelled and rammed including watering complete all as specified and directed
Surface excavation n.exc 30cm deep, averaging 15cm depth and getting out in soft/loose soil complete all as specified and directed.
M&L, formwork to sides of concrete, in foundations, footings, columns & beams, etc in flat for rough finshed surfaces of concrete complete all as specified and directed.
M&L, formwork to soffits of roof slab and chajjas etc thickness not exc 200mm thick complete all as specified and directed.
M&L, Formwork to edges of concrete in roof, chajja etc exc 10cm and n.exc 20cm wide complete all as specified and directed.
M&L, Mild steel bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending for columns, hooking for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L RCC 1:1.5:3 type A-1 (using 20 mm graded BT stone aggregates) in foundations, footing, plinth beams, bases for columns and mass concrete complete all as specified and directed. (reinforcement to be measured separately).
M&L RCC 1:1.5:3 type A-1 (using 20 mm graded BT stone aggregates) in columns, pillars, posts & struts complete all as specified and directed. (reinforcement to be measured separately).
M&L RCC 1:1.5:3 type A-1 (using 20 mm graded BT stone aggregates) in slabs supported on walls, beams & columns complete all as specified and directed. (reinforcement to be measured separately).
M&L RCC 1:1.5:3 type A-1 (using 20 mm graded BT stone aggregates) in roof beams, cantilevers,lintels etc complete all as specified and directed.
M&L for brick work with sub class `B' bricks straight or curved on plan exc 6m mean radius, built in CM 1:4, in half brick walls complete all as specified and directed.
M&L for rendering 10 mm thick in cement mortar 1: 6 on fair faces of brick work, finsh even and smooth without using extra cement complete all as specified and directed.
M&L rendering 5 mm thick in cement mortar 1: 3 on celling / soffits of chajjas etc finished even and smooth without using extra cement complete all as specified and directed.
Extra over plaster as in drip moulds n.exc 15 cm width or girth complete all as specified and directed.
M&L, non-skid ceramic coloured tiles 7 to 8mm thick (square or rectangular) area of each tile exc 0.11 sqm and but n.exc 0.18 Sqm in floors etc laied over 15mm thick screed in CM 1:4 and 25mm thick PCC type B1 ( 1:2:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L, Glazed ceramic coloured tiles 300x450x7mm on vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 10mm thick CM 1:3 complete all as specified and directed.
M&L, broken stone or boulders, hard core of gauge n.exc . 63 mm, deposited, spread and levelled in layers n.exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
S&F 500 ltr capacity or rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) ISI marked or make specified, two layered construction hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600mm long with fitting with ball valves 20mm PTMT complete (min weight 210 gms complete all as specified in SSR Part -I complete all as specified and as directedcomplete all as specified and directed.
S&F, vitreous china wash basin white, flat back size 630x450mm including one pillar cock cp 15mm bore, brackets of ms angle 25x3mm, waste pipe 32mm, CP coupling etc complete all as specified and directed.
S&F PVC (SWR) Gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed
S&F, (SWR) vent cowl 75mm complete all as specified and directed.
M&L, Salt-glazed stoneware drain pipes 150mm internall dia laid in trenchs and jointed complete all as specified and directed.
M&L, concrete bed in PCC 1:4:8 type D2 to drain pipes 150mm dia including packing under and haunching against the sides of pipes after they laid complete all as specified and directed.
S&F, Sheet glass assembly consisting of 5mm thick sheet glass sheet of 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
S&F, Bib taps, cast copper alloy chromium plated with crutch or butterfly handle (Long body), screwed down, screwed for iron pipe of bore 15mm complete all as specified and directed.
S&F, Stop valves, cast copper alloy, chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe 15mm bore complete all as specified and directed.
S&F PVC (SWR) Floor trap plain with grating including jointing with solvent cement and fixed in repair 75 mm dia outlet complete all as specified and directed.
S&F PVC SWR pipe 110mm bore in any length with rubber ring joint laid in floor and wall with necessary clamp complete all as specified and directed
S&F PVC SWR bend any radius of size 110mm bore complete all as specified and directed
S & F Aluminium anodised, barrel tower bolts of extruded section and fixed 200mm complete all as specified and directed.
S&F, Steel windows and ventilaters fixed type with necessary arrangements for fixing of wiremesh complete all as specified and directed.
M&L for preparing new surfaces of wall and applying two coats of cement base paint complete all as specified and directed.
M&L Preparing new surfaces of wall and applying three coats of white wash complete all as specified and directed.
Taking down carefully unserviceable aluminium point wiring (light, fan, socket or power) complete with fitting such as switches, ceiling roses, lamp holders, sockets, fan regulators, wooden terminal box plastic laminated sheet cover from TW battens including TW batten or drawing from existing conduit removing including TW batten all as specified and as directed by Engr-in-Charge.
Taking down carefully existing wooden board , Main switch, MCB DB boxes with MCBs, sheet metal boxes, cut out, etc of any size any capacity from boards complete all as specified and as directed.
Taking down carefully sub main wiring / service connection twin core from wall / LT pole of any size of Aluminum with wooden batten and or through rigid conduit including GI wire and making good the disturbed surfaces of walls, roofs, floors etc complete all as specified and as directed.
M & L for concealed point wiring for one light point controlled by one switch complete with PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable of 1.5 sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 19 mm dia, clip, with MS terminal boxes (not less than 1.0 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including common earth dolly with 3 mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chases on wall / ceiling surfaces for drawing of conduit & cables as required and making good disturbed surfaces of walls with CM 1:3:6 and matching with the existing surfaces including colour washing all as specified and as directed .
Description same as per item No 156 above but one fan point controlled by one switch & regulator.
Description same as per item No 156 above but One 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.
Description same as per item No 156 above but One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.
Description all as per item No 156 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.
S&F switch piano flush button type 5 Amp single pole one way complete all as specified and as directed.
S&F socket outlet 2in1, 3 pin, 5 Amp flush type complete all as specified and as directed.
S&F switch piano flush button type 15 Amp single pole one way complete all as specified and as directed.
S&F socket outlet 2in1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and as directed.
S&F ceiling rose,surface bakelite 63 x50mm three terminals complete all as specified and as directed.
S & F Sheet metal enclosure double door concealed suitable for distribution board when MCB to be used having 100 Amp rated bus bar 4 ways 240 volts complete all as specified and as directed.
S&F MCB single pole and neutral 40 Amp/63 Amp 240 V ,10KA , 'C' series, connected with copper lugs complete all as specified and as directed.
S&F MCB single pole 6 to 32Amps 240 V,10KA, 'C' series, connected with copper lugs complete all as specified and as directed.
Supply and fixing in repair 22W LED 6000k Decorative ultra slim linear LED fitting fixture with extruded polycarbonate ,environmental friendly ,energy efficentinterated driver and 22watts lamp fitted including wiring upto and terminal into ceiling rose complete all as specified and directed by Engr-in- Charge.
Supply and fixing in repair 28W LED 6000k Decorative ultra slim linear LED fitting fixture with extruded polycarbonate ,environmental friendly ,energy efficentinterated driver and 28watts lamp fitted including wiring upto and terminal into ceiling rose complete all as specified and directed by Engr-in- Charge.
Supply and fixing50W LED 6000/6500k exclusive innovative designed, long life versatile pressure dia cast aluminium IP65 flood light luminaire with high power LED as light source including wiring upto and termating into existing ceiling rose complete all as specified and directed by Engr-in- Charge.
Supply and fix M S body exhaust fans, copper wound, AC single phase 230/240V of size 300 mm sweep, 1400 RPM with louvre complete including with all arrangement of making holes on wall, making good and finishing of disturbed surfaces matching with the existing surfaces, necessary fixing arrangement such as fastener bolts, nuts, washers etc, of appropriate size all as specified and as directed
S&F 1100 Volts grade heavy duty, ISI marked cable PVC insulated standard aluminium conductor wire one twin core cable or circular of size 6 Sqmm connected to existing MCB box/main switches complete all as specified and as directed .
S & F delux Fan Regulator electronic rotary, step type 240 Volt 50 Hz, complete all as specified as directed.
S & F Lamp holder,PVC/Urea type with back plate suitable for batten fittings complete all as specified as directed
S & F 9W/10W LED retrofit lamp B-22 holder base with polycorbonate body and aluminium heat sink complete all as specified as directed. Make C&S Cat No LTHPLEDLAMP7W/B22 or equivalent make as specified in Appndx 'B' to PS .
M&L for sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 6 sqmm FRLS, 1100 Volts grade cable drawn into conduit (Existing / new) including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 6 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete all as specified and as directed Note:- (a) Two runs of 6 sqmm cable and one run of 6 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) New conduit and conduit accossories shall be measured separately.
S & F regid non-metallic PVC conduit not less than 20 dia (external) ISI marked (on surface) incl of all accessories and all fittings such as Tees,bends, elbows, reducers, bell mouth, tube ends and fixing accossories such as couplers,lock nuts, saddles, pipe hook etc complete all as specified and as directed
S&F TPN DB-DPX 125 MCCB DBs 4 way single door with provision for DPX 125 MCCB and as incomer and SP/TP MCBs as outgoing Nos of modules DPX 125+12, including 125 Amp MCCB complete all as specified and directed.
S & F Sheet metal enclosure double door concealed suitable for distribution board when MCB to be used having 100 Amp rated bus bar 8 ways 240 volts complete all as specified and as directed.
Supply and fixing light fitting energy saving new generation 10W LED IP65 bulkhead luminaire with opal diffuser including electrically connecting using flexible cord 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm. Make: Havells cat. part. No LHEOAOP7UZ6W010 or equivalent make as mentioned in appendix B to PS..
Supply and laying XLPE insulated, armoured heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 16 X 4 sq. mm complete all as specified and directed.
Supply and laying dry clean sand free from sharp materials, unscreened filling in trenches around under ground cables for cushioning complete all as specified and directed.
Supplying and laying precast concrete cable cover class LV type -I flat size 250x150x40 mm laid parpendicular to the axis of cable in trenches etc complete all as specified and directed.
S&F Ceiling fan copper wound, 1200mm sweep, BEE star rating,AC single phase 230 V including all arrangement like hook,pipe of suitable size complete all as specified and directed.
M&L galvanised iron pipe of 50 mm dia, light grade ISI marked, complete with fittings laid in trenches/ fixed with poles etc as protection to cables complete as ditrected by Engineer in Charge.
S&F LED security/street light fittings1x35W LED 5700K energy saving and envoiremental frendly long life versatile pressure die cast aluminium housing with acrylic cover as diffuser with IP 65 protection and impact resistance of IK 07 luminaire with high power LED as light siurce and electronic driver suitable for pole dia 40mm including 40mm dia light grade tube bracket, bend to shape 1.80m long with two numbers clamp of size 50mmx6mm with nuts, bolts, washers etc including connection with 1.5Sqmm two single core PVC insulated and PVC sheathed cable stranded copper conductor upto ceiling rose and fixing on wall /pole complete as ditrected by Engineer in Charge.
S&F air circulating wall mounted fan having 600mm sweep, copper wound, 240V, 50Hz adjustable speed control, manual, corded with 3 Nos of blade complete as ditrected by Engineer in Charge.
M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick weithing not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) complete all as specified & testing on completion. NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.
DEVENDRA ENTERPRISES
Ms Vinay constructions
M/S DEVANSH ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .