Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.6 LAccepted-AOC 3 100 2 KOTIAN CO NH66 KULAI POST SURATHKAL MANGALORE DAKSHINA KANNADA KARNATAKA 575019 | DAKSHINA KANNADA | KARNATAKA | 575019 | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹42.5 L+₹4.6 L (12.2%)Rejected-Finance DOOR NO 3 79 CHENNNADGRAMAPANCHAYAT PERUMBALA KASARAGOD 681317 | PERUMBALA | KASARAGOD | KERALA | 681317 | L2 | Rejected-Finance NOT BEING L1 | |
| 3 | L3₹43.6 L+₹5.7 L (15.0%)Rejected-Finance | L3 | Rejected-Finance NOT BEING L1 |
Tender Value
₹41.7 L
EMD Value
₹83,450
Closing Date
20 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (I) (CG)Goa
Garrison Engineer (I) (CG)Goa HQ Coast Guard DHQ-11 Chicolna PO- Bogmalo Goa 403806
ADDITION/ ALTERATION AND UPGRADATION OF MES INSTALLATIONS BLDG NO P-5, 16, 18, 19, 30, 109, 110, 112, 142, 149/C AND 158 AT NEW MANGALORE UNDER GE(I)(CG)GOA
2022_MES_513435_2
8267/GOA/E8
Open Tender
Miscellaneous Works
Item Rate
210 days
MES INSTALLATION NEW MANGALORE
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Garrison Engineer (I) (CG)Goa
₹83,450
Yes
12 Jul 2022
26 May 2022
23 Jun 2022
27 May 2022
20 Jun 2022
3 Jun 2022
27 May 2022 - 31 May 2022
60 days
Amount
SCH A PART-I [ B/R ITEMS] Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M & L Glazed ceramic tiles in vertical surface 450x350x7 mm thick set jointed in neat cement slurry and pointed in white or colour cement to match including rendering with 10mm thick cement mortar 1:3 backing layer complete all as specified and directed.
M & L Non-skid coloured Ceramic tiles 7 to 8mm thick, area of each tiles exc 0.18sqm but not exc 0.38sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
S & F Fe-410 W(Gde E-250) quality -B framed work as in doors or gates of angle or other sections with rails complete drilled for fixing of steel sheeting or covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering, running rails and guides) also fastening and fixing including dismantling the old unserviceable one complete all as specified and directed.
S & F rolling shutters of thickness 1.25 mm, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; eerected in position as indicated, push pull or manual type all as specified and directed.
M & L Preparation of new or previously untreated steel surfaces of any description n exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
Excavation in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth, for foundation, etc.and getting out in soft/disintegrated rock complete all as specified and directed.
M & L Plain Cement Concrete 1:4:8, type D2 using 40 mm graded stone aggregate in foundation complete all as specified and directed.
M & L RCC M-20(Nominal Mix), using 20mm graded stone aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M & L RCC Type M-20(Nominal Mix) using 20mm graded stone aggregate beams, cantilevers, bressunners, lintels over 1.5m span complete all as specified and directed.
M & L RCC Type M-20(Nominal Mix) suspended on walls as in roof slabs (using 20mm graded stone aggregate) complete all as specified and directed.
M & L Form work to rough finished surface of concrete foundations, footings, plinth beams, bases of columns and similar work vertical or to batte complete all as specified and directed.
M & L Form work to rough finished surface of sides and soffits of roof beam, beam haunchings.lintles etc as specified and directed complete all as specified and directed.
M & L Form work to rough finished surface of concrete on sofits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exeeding 200mm thick fair finished. complete all as specified and directed.
M & L 8mm dia TMT bars Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M & L 10mm dia TMT bars Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
All as per Item No 16.00- here-in -after as in stirrups, spacers and binders complete all as specified and directed.
M & L dressed laterite stone masonry, well bonded, bedded and solidly hearted built in Cement Mortar 1:6. complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/disintegrated rock complete all as specified and directed.
Removing excavated material n.exc. 50m and depositing where directed at a level n exc. 1.5 m in rocks complete all as specified and directed.
Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M & L rendering 15mm thick in Cement Mortar 1:4 on fair faces on stone masonry surfaces on without using extra cement including mixing of WPC complete all as specified and directed. [Note:- WPC will be measured and paid separately]
M & L rendering 10mm thick in Cement Mortar 1:6 on fair faces of brickwork or concrete surfaces is to be finished even smooth without using extra cement complete all as specified and directed.
M & L rendering 5mm thick cement plaster in Cement Mortar 1:3 on fair faces of brickwork or concrete surfaces on ceiling is to be finished even smooth with out using extra cement complete all as specified and directed.
Supply only Integral waterproofing compound (WPC) complete all as specified and directed.
M & L two coats of oil emulsion distemper over new surfaces of walls over a coat primer with alkali resistant primer including preparation of surfaces complete all as specified and directed.
M & L two coats of oil emulsion distemper over new surfaces of ceiling over a coat primer with alkali resistant primer including preparation of surfaces complete all as specified and directed.
M & L preparation of new surfaces and applying two coats of weather proof (antifungal) paint over a coat of suitable primer over a coat of sealent base coat as per manufactures instructions complete all as specified and as directed..
M & L preparation of old wooden surfaces and applying one coats of synthetic enamel paint on surfaces over 10cm girth or width complete all as specified and directed.
M & L preparation of old steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coats of synthetic enamel paint on surfaces complete all as specified and directed.
M & L for preparation and complete removal of existing treatment surfaces of walls, soffits of chajjas cornices etc and applying two coats of oil emulsion over a coat of alkali resistant primer with 3mm thick of white cement based putty complete all as specified and directed.
M & L preparation & complete removal of of old plastered external surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant paint complete all as specified and directed.
M & L preparation of old decorated ceiling and applying one coat of white wash complete all as specified and directed.
S & F Mild steel Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of grade Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed.
M & L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling old unserviceable steel sheeting complete all as specified and directed.
M & L Preparation of new or previously untreated steel surfaces of any description n exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
Taking down door chowkats with shutter n.exc 1.5 sqm each (without taking off shutters from the frame) complete all as specified and directed
Taking down door chowkats with shutter exc 1.5 but n.exc 4 sqm each (without taking off shutters from the frame) complete all as specified and directed
S & F 2nd class hard wood, 35mm thick factory made door shutters plain framed, panelled shutter with lock rail and panel of 12mm thick veneered water proof particle board with commercial veneering on both faces the size of rails and stile as per IS -1003( Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.
M & L 19mm thick pre-laminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails and screws complete all as specified and directed.
S & F 35 mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepared to receive glass gauze etc (without sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and directed.
S & F Mild Steel works of Brands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large haps and staples; chains, hand made sliding bolts, clamps, hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way straps, plate washers and similar small articles conforming to Fe-290 Gde -E-165 complete all as specified and directed
M & L Providing Plain cement concrete of type B0, 1:2:4 (using 12.5 mm graded stone aggregates) as in hold fast complete all as specified and directed.
S & F 2nd class hard wood, plain solid straight chowkhats & frames, wrought, framed, rebated on the solid, rounded or chamferred put together with glue pinned at joints complete all as specified and directed.
M & L preparation of two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description, not otherwise described, over 10cm width or girth complete all as specified and directed.
M & L applying anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 450 at 150mm centre to centre and sealing the same complete all as specified and directed.
S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.
S & F factory made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:) with 2, 4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.
M & L 100mm size aluminium handle (ISI Marked) cast type anodized, fixed complete all as specified and directed.
M & L 150mm size aluminium handle (ISI Marked) cast type anodized, fixed complete all as specified and directed.
S & F 150 mm size long, aluminium, anodised, barrel tower bolts (ISI Marked) of extruded section complete all as specified and directed.
S & F 100 mm size long, aluminium, anodised, barrel tower bolts (ISI Marked) of extruded section complete all as specified and directed.
S & F Stainless Steel Butt hinges 100mm size complete all as specified and directed.
S & F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.
S & F Stainless Steel Butt hinges 75mm size complete all as specified and directed.
S & F in repairs 550 X 440 mm Wash basins, Vitreous China coloured (bowl type), including brackets & cutting for and pinning in ends of brackets or erecting stand including 32mm dia waste coupling PTMT full thread weight not less than 45gm complete all as specified and directed.
S & F 32mm dia High density polyethylene(HDPE) pipes of pressure rating 6kg/cm2 complete all as specified and directed.
S & F in repairs Pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
S & F in repairs for Bib taps fancy type, Chromium Plated for iron pipe and fixed 15mm bore complete all as specified and directed.
S & F in repairs cast copper alloy Chromium Plated angle cock fancy type, with long shank & cup(concealed type) screwed down high pressure or butterfly handle screwed down, screwed for iron pipe of brass ferrule and fixed 15 mm bore complete all as specified and directed.
S & F PVC Connection 15mm bore 45cm long with brass coupling complete all as specified and directed.
S & F in repairs, vitreous China Squatting Pan 'Orissa pattern, size 630 X 450 mm white with integral footing rests(excluding flushing cistern and flush pipe), pedestal pan and trap, including connection to drain or out going pipe and to flush pipe, anti syphonage pipe, etc complete all as specified and directed.
S & F in repairs Soap dish vitreous china, white approximate size 160x 160x 90mm any type fixed to plugs with chromium plated brass screws complete all as specified and directed..
S & F in repairs Chromium Plated brass towel rail 20mm dia, 'D' type 60 cm long fixed complete all as specified and directed.
S & F 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.
Demolition and breaking up drain AC pipes to walls 100mm dia of any description complete all as specified and directed.
M & L PVC (SWR) pipes 110mm bore single socketed in any length, with rubber rings complete all as specified and directed.
M & L PVC (SWR) bends 110mm bore complete all as specified and directed.
M & L PVC (SWR) bends 110mm bore vent coul complete all as specified and directed.
M & L 75mm bore PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
M & L PVC (SWR) bends 75mm dia complete all as specified and directed.
S & F PVC Nahani Trap 75mm (SWR) floor trap, plain with grating including jointing with solvent or cement complete all as specified and directed.
M & L applying water proofing treatment with the following stages/specification, complete all as specified and directed. STAGE 1:- Removal of existing roof treatment consisting of screed bed, tar felts etc including removal of debris to a distance exc 250m but n exc 500m & clean the roof surface throughly with wire brush & remove deleterious materials. STAGE 2:- Brushing neat cement slurry with 3.0 kg of cement per sq meter complete all as specified and directed. STAGE 3:- 10mm thick cement rendering in cement mortar 1:3 over green neat cement slurry to receive roof treatment and finished even and smooth without using extra cement mixed with water proofing compound(ratio WPC and cement as per manufacture instructions) as in grading to RCC roof surface complete all as specified and directed. Note- water proofing compound shall be measured and paid separately). STAGE 4:- Applying tack coat of priming the surface bitumen primer @ 0.40Litre/Sqm or of as per manufacturers instructions (manufactured by the same agency as that of APP membrane) STAGE 5:- M & L Water proofing roof treatment, consisit of a five layered Atactic polypropylene modified polymeric membrane of minimum 4 mm thick and minimum weight not less than 4 Kg/Sqm, reinforced with polyster non woven fabric matt (weight not less than 150 gm/sqm), laid with LPG torch forced application over roof surface, with a side & end overlaps of minimum 100 mm. STAGE 6:- A coat of solar reflective bituminous aluminium paint @ 100 gm/Sqm on top, including sealing all joints by thermo fusion, and one coat silver paint on it all as per manufacturer's instructions
S & F powder coated anodised aluminium frame for windows, ventilator with one or more rebates including joining cleat for fixing etc (Minimum thickness of powder coating 50 micron) complete all as specified and directed.
S & F Aluminium anodised decorative grill, 10mm thick (Pattern- DG 104) fixed with necessary H/F/H aluminium channel etc complete all as specified and directed. [Note : Decorative grill fixed with windows with all fittings as directed by Engineer-in-charge]
S & F powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21, 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.
S & F Figured glass, pin headed type 4 mm thick and glazing with glazing clips to Aluminium frame, exc 0.5 Sqm in each pane complete all as specified and directed.
S & F sheet glasses pin head type, 4.0mm thick glazing with oil putty all with aluminium beading, glazing pin etc n exc 0.5 sqm in each pane complete all as specified and directed.
S & F Stainless Steel wire mesh 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with Stainless steel wire staples complete all as specified and directed.
Demolition of un-reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.
Surface excavation not exceeding 30 cms deep and averaging 15 cms deep in soft / loose soil complete all as specified and directed.
M & L Hard core with broken stone or boulders of gauge n exc 63mm, deposited ,spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M & L 75 mm thick Plain Cement Concrete (1:3:6) type C2 using 40mm graded stone aggregate as in sub base of flooring /platforms/hard standing complete all as specified and directed.
M & L Cement concrete tiles 30cm x 30cm x 25mm thick with grey cement and pigment ,machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished with and including 20mm thick screed bed of cement mortar 1:6 complete all as specified and directed.
M & L sand filling under floors or in foundations including watering and consolidation in etc complete all as specified and directed.
Supply & Laying of 60mm thick machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658-2006 of M-35 grade with grey cement and pigment etc complete all as specified and directed.
S & F Miild Steel hand rails, half round or other steel section drilled counter sunk for balusters running bars, for doors,balusters nosing to steps including embedding in concrete and srewing etc flat iron fillets incl all necessary drilling,bolting or riveting etc and similar work confirming to Fe-290 Gde E-165 including dismantling the old one complete all as specified and directed.
S & F Unplasticised PVC (UPVC) pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe in 15 mm bore complete all as specified and directed.
S & F Unplasticised PVC(UPVC) pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe in 20 mm bore complete all as specified and directed.
S & F Unplasticised PVC (UPVC) pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe in 25 mm bore complete all as specified and directed.
S & F Gunmetal globe or gate valve 25mm bore pipe iron wheel head screwed both ends for PVC pipes incl taking out old complete all as specified and directed.
S & F Gunmetal globe or gate valve 20mm bore pipe iron wheel head screwed both ends for PVC pipes incl taking out old complete all as specified and directed.
S & F in replacement of Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) multi layer- minimum 3 layered hoisted & fixed in position of capacity 500 liters complete all as specified and directed.
S & F 20mm dia PP-R Ball valves (brass insert) as per requirement of the site complete all as specified and directed.
SCH A PART-II [AREA DRAINAGE] B/R ITEMS M & L PCC block with burnt brick straight or curved on plan exc 6M mean radius built in cement mortar 1:6 including demolition of old one complete all as specified and directed.
All as per Item No. 94.00 above except bricks complete all as specified and directed.
M & L cement concrete type D2, 1:4:8, using 40 mm graded aggregate in foundations, filling and mass concrete including demolition the old one complete all as specified and directed.
M & L rendering 15mm thick in Cement Mortar 1:6 or concrete surface or brick surface to sunken floor, finished even and smooth w/o using extra cement complete all as specified and directed.
M & L for PCC (1:2:4) type B1 using 20mm graded stone aggregates as in coping and the likes including weathering slightly rounded or chamfered angles and throating including form work wall complete all as specified and directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete,using extra cement, including forms,moulds, mtred/stopped ends etc complete all as specified and directed.
SCH A PART-III [ E/M ITEMS] Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and directed.
Taking down submain wiring of any size including GI/copper earth continuity conductor in PVC conduit on wall/roof making good to disturbed surfaces complete all as specified and directed.
Taking down old ceiling /Exhaut fan,dismantling blades deposoting to store complete all as specified and directed.
M & L Point wiring complete with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit with all accessories such as internal bend, end caps etc complete concealed in walls and surface in ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc complete all as specified and directed for the following:- [Note:- Circuit wire from DB to Switch boards shall be included in quoted rate]
One light point controlled by one, one way switch complete all as specified and directed.
One fan point controlled by one switch complete all as specified and directed.
One switch socket outlet 5A on same board with other switch complete all as specified and directed.
One switch socket outlet 5 A independent with cable 1.5 sqmm complete all as specified and directed.
All as per Item No. 105 described here-in-before but with copper conductor cable FRLS 2.5 Sqmm for one 3 pin socket outlet, 15 Amps and including provision of 2.5 Sqmm PVC insulated copper conductor FRLS cable as earth continuity conductor on independent board complete all as specified and directed. [Note:- Circuit wire from DB to Switch boards shall be included in quoted rate]
M & L Sub main wiring with 2 runs of 6 sqmm single core PVC insulated unsheathed multistranded copper conductor cable 1100 volts grade FRLS drawing in and including PVC rigid medium grade conduit concealed in wall of suitable size complete including provn of 6 sqmm PVC insulated copper conductor earth continuity wire. [Note :-One run of three single core cable and conduit shall be measured as one length]
S & F Switch Modular 6A one way, 1 module complete all as specified and directed.
S & F Switch Modular 16A one way, 1 module complete all as specified and directed.
S & F Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.
S & F Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.
S & F Fan step regulator, 120W - 2 module complete all as specified and directed.
S & F ceiling rose surface type bakelite 65 x 50mm with three terminals complete all as specified and directed.
S & F ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor 5 Star BEE rating, 52W, RPM-340, air delivery 210 CMM, ISI standard.complete all as specified and directed. [Make:- BAJAJ ELECTRA 50 (ISI & 5 star) or similar in makes as mentioned in Particular specifications]
S & F exhaust fan, electric single phase AC 230 Volts,Copper wound, Steel body, self opening louvers complete 300mm Sweep with blades and frame and louvers, 1300 RPM air delivary not less than 435 cu.mtr/min connect to ceiling rose complete all as specified and directed.
Earthing complete with galvanisedsteel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not lessthan 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mmdia by means of bolts, nuts, check nuts and washers of galvanised ironor steel all as shown in electricalplate No. 3 connected to earthing test point all as specified or indicated including necessary excavation, testing on completion complete all as specified and directed.
S & F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
S & F LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexiblecopper conductor cable of suitable size from ceiling rose complete all as specified and directed.
Supply,install,test and commisioning Calcium Hypochloride dosing system made up of non metallic thermoplastic with capacity 100L consisting of receptacles for power free automatic water chlorination with proportional dosing arrangement compatable to stequa 411 AE refill with the following atatchments complete all as specified and directed.-
Water inlet/outlet regulator
Overflow vent
Drain Valve
Fluid Level Controller
Station hood assembly for maximum 13 Nos cavity arrangement
Supply and install chlorination refill Stequa 411 AE 25 Pieces set consisting of Chlorine tablets contained in plastic cylindrical sealed disposable sanitiser refill for disinfection of drinking water with arrangement for controlled release of disinfectant in water complete all as specified and directed.
S & F sheet metal enclosure double door MCB DB SPN 8 way 240 V complete all as specified and directed.
S & F sheet metal enclosure double door, acrylic window type for MCB DB TPN 4 way 415V with 200 A bus bar complete all as specified and directed.
S & F 415V 10KA 'C' curve miniaturecircuit breaker (MCB) of TPN 32 A in the DB complete with connection testing and commissioning complete all as specified and directed.
S & F amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 32 A in the MCB DB complete with connection testing andcommissioning complete all as specified and directed.
S & F amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 6 to 32 A in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
Supply only water purity verifier consisting of 1 Comparator with lid ,30 tablets of pH RAPID ,30 tablets of Chlorine RAPID, 1 instruction sheet ,1 plastic box complete all as specified and directed.
KOTIAN -ECC
KDR CONSTRUCTION
Bidder Name
S M Shetty
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .