Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.0 LAccepted-AOC VILL MOKHAWA TEHSIL GUDAMALANI DIST BARMER RAJASTHAN 344031 | GUDAMALANI | BARMER | RAJASTHAN | 344031 | L1 | Accepted-AOC LOWEST REASONABLE BID | |
| 2 | L2₹12.5 L+₹1.4 L (12.4%)Rejected-Finance | L2 | Rejected-Finance NOT LOWEST | |
| 3 | Rejected-Technical | - | Rejected-Technical Not Eligible Bidder as not enlisted in b ii Category therefore does not satisfies the eligibility criteria as per NIT. |
| Sl No | Description | Qty | Unit | JAI ENTERPRISES L2 | NAGEL ENTERPRISES L1 |
|---|---|---|---|---|---|
| 1.00 | Taking down old Unsv GO's and supply & install 11 KV air break gang operated triple pole out door type gang operated air break switch mechanically operated, mounted on insulator and steel frame with operating mechanism worked from ground level with 09 Nos insulators outdoor type triple pole suitable for horizontal/vertical installation provided with locking arrangement consisting of MS channel HT post type insulator high pressure heavy tined copper alloy contact assembly suitable for 400 Amps, including air break switch suitable for 11 KV, 400 Amps mounted on 06 Insulators with drop out fuse unit, operating rod 25mm dia GI medium grade pipe complete all as specified and directed by Engr-in-Charge. | 2 | Each | 25,000 ₹50,000 | 21,000 ₹42,000 Lowest |
| 2.00 | Material and labour for renewal of earthing complete with galvanised steel earth plate electrode 60cm X 60cm X 6mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level connected to galvanized strip 32 X 6mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 of SSR Part-I connected to OH conductor on pole/ Panel/ main switch board etc all as specified or indicated and testing on completion including provision galvanized strip protected by 40 mm bore, light grade pipe and watering pipe shall be 20 mm bore medium grade GI pipe including excavation & earth work, PCC pit with RCC cover, charcoal, salt, funnel, GI strip and protection pipe upto 7.5 mtr complete all as specified and directed by Engr-in-Charge. | 3 | Each | 12,000 ₹36,000 | 10,000 ₹30,000 Lowest |
| 3.00 | Material & labour for repair of GO to smooth operation & alighment of contacts, connect/tighting of HT cable including greasing of moving mechanism, replacement of Male contact/moving contact blade, female contact/fix contact jaw, tinned copper flexible jumper, MS jumper carrier, back connector plate where required, nut-bolts washers etc. of required size and length and testing all as specified and directed by Engr-in-charge. | 2 | Each | 5,000 ₹10,000 | 2,000 ₹4,000 Lowest |
| 4.00 | Taking down old unsv and supply & fix MCCB AC, 415 volts, 4 pole adjustable type, 250 Amps, breaking capacity 36 KA complete all as specified and directed by Engr-in-Charge. | 2 | Each | 20,000 ₹40,000 | 18,000 ₹36,000 Lowest |
| 5.00 | Taking down old unsv and supply & fix MCCB AC, 415 volts, 4 pole adjustable type, 200 Amps, breaking capacity 36 KA complete all as specified and directed by Engr-in-Charge. | 2 | Each | 18,500 ₹37,000 | 15,000 ₹30,000 Lowest |
| 6.00 | Taking down old unsv and supply & fixing cable jointing kit for 11 KV (Eartherd) grade cable for outdoor termination heat shrink type joint complete with jointing material and accssories suitable for 3 core XLPE armoured aluminium conductor cable of size 120/95 sq mm complete all as specified and directed by Engr-in-Charge | 4 | Each | 10,000 ₹40,000 | 5,000 ₹20,000 Lowest |
| 7.00 | Taking down old unsv and supply and fixing cable jointing kit for 11 KV (Earthed) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm complete all as specified and directed by Engr-in-Charge . | 3 | Each | 8,000 ₹24,000 | 4,500 ₹13,500 Lowest |
| 8.00 | Taking down old Unsv and supply and fixing Cable jointing kit for 11 kv (Eartherd ) grade cable for outdoor termination heat shrink type joint complete with jointing material and accssories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 sq mm complete all as specified and directed by Engr-in-Charge | 3 | Each | 5,070 ₹15,210 Lowest | 6,500 ₹19,500 |
| 9.00 | Taking down old Unsv and supply and fixing Cable jointing kit for 11 KV (Eartherd ) grade cable joint, heat shrink type straight through joint complete with jointing material and accssories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 to 120 sq mm by Engr-in-Charge. | 3 | Each | 20,000 ₹60,000 | 10,000 ₹30,000 Lowest |
| 10.00 | Taking down old unsv and supply & fixing shackle porcelain, vitreous, white, brown or green insulator including galvanised mild steel straps, washers, insulator bolts, washers and nuts, 150mm height, 150mm dia for 11000 volts working pressure grade and with galvanised steel section straps in mm 38x5 with 20 mm dia of bolts all as directed by Engr-in-Charge | 3 | Each | 1,000 ₹3,000 | 300 ₹900 Lowest |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
16 Dec 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE ARMY JODHPUR
CWE ARMY MULTAN LINE ARMY AREA JODHPUR-342010
COMPREHENSIVE REPAIR AND MAINT OF EXTERNAL ELECTRIC SUPPLY OF HT DISTRIBUTION SYSTEM WITH ACCESSORIES AT MOUNT ABU MIL STN UNDER AGE (I) UDAIPUR
2025_MES_720573_3
82526/34/E8
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
MOUNT ABU
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
AGE (I) UDAIPUR
₹20,000
Yes
16 Feb 2026
1 Dec 2025
18 Dec 2025
1 Dec 2025
16 Dec 2025
9 Dec 2025
1 Dec 2025 - 8 Dec 2025
Amount
Taking down old Unsv GO's and supply & install 11 KV air break gang operated triple pole out door type gang operated air break switch mechanically operated, mounted on insulator and steel frame with operating mechanism worked from ground level with 09 Nos insulators outdoor type triple pole suitable for horizontal/vertical installation provided with locking arrangement consisting of MS channel HT post type insulator high pressure heavy tined copper alloy contact assembly suitable for 400 Amps, including air break switch suitable for 11 KV, 400 Amps mounted on 06 Insulators with drop out fuse unit, operating rod 25mm dia GI medium grade pipe complete all as specified and directed by Engr-in-Charge.
Material and labour for renewal of earthing complete with galvanised steel earth plate electrode 60cm X 60cm X 6mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level connected to galvanized strip 32 X 6mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 of SSR Part-I connected to OH conductor on pole/ Panel/ main switch board etc all as specified or indicated and testing on completion including provision galvanized strip protected by 40 mm bore, light grade pipe and watering pipe shall be 20 mm bore medium grade GI pipe including excavation & earth work, PCC pit with RCC cover, charcoal, salt, funnel, GI strip and protection pipe upto 7.5 mtr complete all as specified and directed by Engr-in-Charge.
Material & labour for repair of GO to smooth operation & alighment of contacts, connect/tighting of HT cable including greasing of moving mechanism, replacement of Male contact/moving contact blade, female contact/fix contact jaw, tinned copper flexible jumper, MS jumper carrier, back connector plate where required, nut-bolts washers etc. of required size and length and testing all as specified and directed by Engr-in-charge.
Taking down old unsv and supply & fix MCCB AC, 415 volts, 4 pole adjustable type, 250 Amps, breaking capacity 36 KA complete all as specified and directed by Engr-in-Charge.
Taking down old unsv and supply & fix MCCB AC, 415 volts, 4 pole adjustable type, 200 Amps, breaking capacity 36 KA complete all as specified and directed by Engr-in-Charge.
Taking down old unsv and supply & fixing cable jointing kit for 11 KV (Eartherd) grade cable for outdoor termination heat shrink type joint complete with jointing material and accssories suitable for 3 core XLPE armoured aluminium conductor cable of size 120/95 sq mm complete all as specified and directed by Engr-in-Charge
Taking down old unsv and supply and fixing cable jointing kit for 11 KV (Earthed) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm complete all as specified and directed by Engr-in-Charge .
Taking down old Unsv and supply and fixing Cable jointing kit for 11 kv (Eartherd ) grade cable for outdoor termination heat shrink type joint complete with jointing material and accssories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 sq mm complete all as specified and directed by Engr-in-Charge
Taking down old Unsv and supply and fixing Cable jointing kit for 11 KV (Eartherd ) grade cable joint, heat shrink type straight through joint complete with jointing material and accssories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 to 120 sq mm by Engr-in-Charge.
Taking down old unsv and supply & fixing shackle porcelain, vitreous, white, brown or green insulator including galvanised mild steel straps, washers, insulator bolts, washers and nuts, 150mm height, 150mm dia for 11000 volts working pressure grade and with galvanised steel section straps in mm 38x5 with 20 mm dia of bolts all as directed by Engr-in-Charge
Taking down old unsv and supply & fix pin type, porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 150mm height, 150mm dia for 11000 volts grade all as directed by Engr-in-Charge
Supply & fixing in replacement of medium grade galvanised iron tubes 25mm dia at two/four pole GO's system for up/down with making required shape or hole, fixed with nut, bolt, washers all as specified and directed by Engr-in-Charge
De-Hydration and filtration of transformer oil of the transformer, and Voltage stabilizer, AC, 11KV/433 Volt mounting on 2 pole/ 4 pole structure/ platform all as specified and directed by Engineer-in-charge
Supply & filling and topping up fresh transformer Oil having dielectric strength more than 50 KV capacitor at 2.5 mm gap for transformer, all as speceified and directed by Enger-in-Charge.
Material & labour for cross arms, bracing, supports, back plate & clamps fabricated from structural steel section including nuts, bolts, washer cutting, welding bending cold or hot, drilling holes for bolts in any shape for bolts in any shape or size inclusive of painting with 2 coats of aluminum paint over a coat of primer complete all as specified and directed by Engr-in-Charge
M & L for Stay assembly complete with accessories as shown in electrical plate No 1 (loop type insulator,stay clamps, excavation and concrete sould be included in the rate and no separately measured) complete all as specified and directed by Engr-In-Charge
(b) Outgoing (i) MCCB 4 pole, 415 volts AC grade, 100 Amps rating and 16 KA rupturing capacity complete - 05 No (ii) MCCB 4 pole, 415 volts AC grade,63 Amps rating and 63 KA rupturing capacity complete - 03 No (iii) MCB SPN 230 volts AC grade,C Curve, 40 Amps rating complete - 02 Nos (iv) Timer Switch (daily with IP 53 box) - 01 Nos (c) Platform for the panel with PCC 1:4:8 type D-2 with 40mm graded crushed stone aggregate, 15 cm thick in foundation, brick work in CM 1:6 with sub class `B', old size bricks, rendering 15mm thick in CM 1:6 on exposed surfaces and 100mm thick PCC padding 1:3:6, type C-1 using 20 mm graded crushed stone aggregate on top and grouting bolts etc for panel. The platform shall be such that it is of a height 45cm above the nearest road level. Note : (i) All out going feeders shall be connected by cable through suitable size gland plate / glands. (ii) The various feeders shall be indicated by 50 mm size letters in synthetic enamel white paint.
Material and labour for PCC 1:3:6 type C-2 using 40mm grade stone aggeregate for fundation or stay/ pole/ strat complete all as specified and directed by Engr-in-Charge
Material and labour for PCC 1:3:6 type C-1 using 20mm grade stone aggeregate for pedstal including necessary from work including finishing to exposed surface even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge
M & L for repair/servicing of 11KV/433 Volt transformer upto 630 KVA at Army area Mount Abu checking of high voltage out put, replacing of HT & LT porcelain transformer bushing, air breathing filter, complete all as specified and directed by Engineer-in-charge
Material & Labour for XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured,electric HT power cables (heavy duty) with aluminium conductor, 11000 volts Earthed grade cross sectional area 120 sqmm 3 Core complete all as specified and directed by Engr-in-Charge.
Supply & Laying, connection with lugs of suitable size at both end and testing electric under ground LT cable PVC/XLPE insulated armoured aluminium conductor cable 1100 volts grade of size 50 sqmm 3.5 core in trenches, ducts, pipe on walls, poles complete all as specified and directed by Engr-in-Charge.
Supply & Laying, connction with lugs of suitable size at both end and testing electric under ground LT cable PVC/XLPE insulated armoured aluminium conductor cable 1100 volts grade of size 95 sqmm 3.5 core in trenches, ducts, pipe on walls, poles complete all as specified and directed by Engr-in-Charge.
Excavating in trenches n. exc 1.5m wide and n. exc 1.5m in depth for foundation/ pipes/ cable etc, n. exc 10sqm on plan and n.exc 1.5m in depth and getting out in hard/dense soil complete all as specified and directed by Engr-in-Charge
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick, in soil complete all as specified and directed by Engr-in-Charge
Removing of excavated surplus soils, n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed by Engr-in-Charge
Material & labour for sand cushioning for PVC/XLPE cable with screened and washed sand and punning to provided a required covers complete all as specified and directed by Engr-in-Charge
Supply and laying un-reinforced precast concrete cable cover, class HVP, type 2 with peak size 450mm x 180mm x 40mm complete all as specified and directed by Engr-in-Charge
Material & labour for GI pipe 100mm dia medium grade for protection of XLPE UG cable complete all as specified and directed by Engr-in-Charge
JAI ENTERPRISES (BID ID -3499691)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.56 MB
BOQ_831229.xls
BOQ • 0.41 MB
TENDER34.pdf
Tender Documents • 1.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .