Construction of Road from BSF main Gate Bay Water Wing Dhubri Camp to Brahmaputra Water Wing Jetty (Ch. 0.00 m to Ch. 154.00 m) under SOPD G for the year 2025-2026

Amount

Road Works

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m transporting to site, spreading, grading to required slope and compacting p g to meet requirement of Table 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5.

Construction of Sub-grade and earthen shoulders with approved material obtained from borrow pits with all lift and leads, transporting to site, spreading grading to required slope and compacted to meet requirement of Table 300.2 wit lead up to 1000 m as per Technical specification Clause 3031.

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical specification Clause 401 (II) for Grading -II material

Water Bund Macadam Sub-base/WBM Grading-III using stone screening Tpe -B11.2 mm for Gr-III providing, laying spreding and compacting stone aggregates of specified sizes to water bound macadam specification including spreading in unirom thickness, hand packing, folling with 3 wheels 80-100 KN static roller in stages to proper grade and camber, applying and brooming stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to teh required density as per Technical Specification Clause-405.

Providing and laying interlocking concrete Block Pavement (M-40) having thickness 80 mm as per technical specification clause 1504 including carriage, a) including Edge block/Edge restraints.

Providing Colour Block 100%

Providing and fixing retro reflectorised cautionery, mandatory and informatory sign as per IRC:67 made encapsulated lens tpe reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75mmx75mmx8 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450mm x 450mm x 600 mm below ground level as per drawings and technical specificaiton. (i) 600 mm equilateral trangle

Providing and fixing retro reflectorised cautionery, mandatory and informatory sign as per IRC:67 made encapsulated lens tpe reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75mmx75mmx8 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450mm x 450mm x 600 mm below ground level as per drawings and technical specificaiton. (ii) 600 mm circle

Providing and fixing retro reflectorised cautionery, mandatory and informatory sign as per IRC:67 made encapsulated lens tpe reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75mmx75mmx8 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450mm x 450mm x 600 mm below ground level as per drawings and technical specificaiton. (iii) 800 mm x 600 mm rectangular

Providing and fixing retro reflectorised cautionery, mandatory and informatory sign as per IRC:67 made encapsulated lens tpe reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75mmx75mmx8 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450mm x 450mm x 600 mm below ground level as per drawings and technical specificaiton. (i) 600 mm equilateral trangle (ii) 600 mm circle (iii) 800 mm x 600 mm rectangular (iv) 900 mm side octagon

Construction of Drainage works

Prividing and fixing of tpical PMGSY informatiory sign board with logo as per MORD specifications nad drawign. Three MS paltes of 1.6 mm thick, top and middle plate duly welded with MS flat Iron 25mmx 5 m size on back on edges. The lower plate will be welded with MS angle irom frame of 25mm x 25mm x 5mm. The angle irom frame of the lower most plate and flate iron frame of middle plate will be welded to 2 nos. 75 mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450 mm 600 mm, 600 mm below ground level. the top most diamond plate will be welded to middle plate by 47 mm x 47 mm of 12 SWG steel plate tube. All MS will be stove enameled on both sides. Lettering and printing arrow, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1

Providing Sparkle Solar Road Studs, manufactured by Tata BP Solar India Ltd. Of size (125mmx125mm), 90 mm height (from bottom of shank to the top of stud) with detachable battery, m6LEDs three on each side for Bi-directional studs/3 LEDs on one side for unidirectional studs, ultra bright LED in amber and red colour, weight per stud 700+25 grs. f;asj rate pf 50-65 time per minute completely water resistant and weather proof with replacement warranty and free maintenance for one year from the date of installatin of stud on road- installation should be made using adhesives and procedures recommended by manufacturer under the supervision of their completent technical a) Bi-directional stud

Providing and erecting cement concrete sitting benches as per designs and Technical Specification and directions of the Engineer

Solar street lighting suplying including installation and commissioning automatic on/off operation street lighting system with 350 WP (175wpx2) solar module rating and energy effcient lhigh power led lamps of 80 walts with luminous flux greater that 8000 Lummens and Lumen effciency of all cover housing and high efficiency LED lamps and fitted with paslet and accrossories for weather and insert proof operatino Battery 12V 150 ah-02 nos. sealed low/negligible maintenance batteries designed for repeated cycle operation and shall be enclosed ina cabin t hat has piller proof lock & ket arrangment Pitch circle dia 250 mm balt length 750 mm, projected bolt length 125 mm pole foundation shall be pit of 75x75x200 cm in all type of sal or rocks and filling the pit with 1:2:4 cc and muffing of the pole up to 400mm above the ground level.

utility Shifting

CHAITANYA DAS (BID ID -291724)