Renovation of Lab. No. 08 at SFS dept., SRP block, CSIR-CFTRI, Mysuru

Amount

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Making rough of the existing flooring surface by scrapping and using mechanical and means preparing the surface rough for laying flooring tile.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 5.00 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 M sand)

15mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 M sand)

Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 M sand : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. MAKE: TATA/ JSW/ Indus

Providing and fixing factory made PVC door frame made of PVC extruded section of profile size 42X48mm having an overall dimension (tolerance ± 1mm) with wall thickness 2.0mm (± 0.2mm), corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded and 3 nos. staineless steel hinges fixed to the frame for door shutter complete as per manufacturers specification including 24mm thick factory made multi panel PVC door shutter reinforced with excellent polymeric reinforcement, shall be water proof, termite proof quality including fixing 2 nos of good quality powder coated aluminium aldrops and 2 nos PVC handles of 150mm length complete as per the manufacturers specification and direction of Engineer-in-charge.(For WC and bath room door shutter) Make: Maruthi, Mirror or its equivalent

Providing and laying vitrified floor tiles in different sizes (Minimum 10mm thickness) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 M sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. (Tile cost is considered for Rs 80.00/Sq.ft or Rs. 861/- per sqm including GST) Size of Tile 600x600 mm MAKE: SOMANY/ KAJARIA/ RAK/ NITCO

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600x600 mm

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 M sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour Jet black/ Cherry/Ruby red Area of slab over 0.50 sqm

Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm MAKE: CERA/ PARRYWARE/HINDWARE

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40 mm dia

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 20 mm nominal dia Pipes Make: ASHIRWAD/ FINOLEX

Providing and fixing brass swan neck tap with CP coated finish as instructed by Engineer-in-charge Make: Hindware

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/ litre MAKE: asian or its equivalent

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Voatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour: Two coats MAKE: asian/ NEROLAC/ Dulux

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work MAKE: asian - apcolite gloss enamel OR Nerolac – synthetic enamel OR Dulux - Gloss enamel

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

K S RAVEESH KUMAR

NS INFRAS