REPAIR/ MAINTENANCE OF SUMMER APPLIANCES AND OTHER CONNECTED WORKS AT METCALFE HOUSE AREA (JCB, ZONE B, CACOSA, KASHMIR HOUSE AREA) UNDER GE I RND DELHI

Amount

M & L for Servicing of the window type AC 1.5/2 ton capacity of any make, including oiling/greasing the blower motor, cleaning the evaporator condenser coils externally to remove the dust, replacement of defective thimbles etc and re-fixing the air conditioner at its original position by the experienced refrigeration mechanic complete all as specified and as directed. Note:- (i) Any spare part/item need to be replaced/gas charging etc shall be replaced & paid seperately under respective items. (ii) The cost of dismantling, taking out AC from window and shifting to location where directed for proper washing and servicing and refixing the same shall be deemed to be included quoted unit rate.

All as per ser item No 1.00 above but split type/cassette type AC/Inverter type AC 1.5/2.0/3.0/4.1 Ton

All as per ser item No. 1.00 above but for VRF inverter split type/cassette type 3 phase AC of capacity 3 TR to 7.5 TR.

M&L in replacement Fan Motor of AC (Window/ Split Type) 1.5 TR Capacity of approved Make and required Size to suit existing AC including taking out the unservice-cable Fan Motor from the AC complete all as specified and directed.

All as per srl Item No. 4.00 above but AC (Window/Split Type). 2.0 TR Capacity

M&L Rewinding Fan Motor of AC 1.5 TR/2.00 TR Capacity, (Window/Split Type) of any Make with Super Enameled Copper winding Wire of appropriate Gauge and Quantity including taking out burnt Winding complete all as specified and directed.

M&L in replacement Air circular Blower Fan Motor of AC (Split Type), 1.5 TR/2.0 TR./3.00TR Capacity including taking out unserviceable Air circular Blower Fan Motor complete all as specified and directed.

M&L in replacement Air Filter suitable for AC (Window type) 1.5 TR/2.0 TR Capacity including taking out unserviceable Air Filter from AC complete all as specified and directed.

M&L in replacement Air Filter suitable for AC (Split type) 1.5 TR to 3.0 TR Capacity including taking out unserviceable Air Filter complete all as specified and directed.

M&L in replacement Capacitor Running 36 mfd – 45 mfd suitable for new/star rated AC (Window/Split Type) 1.5 TR/2.0 TR/ 3.0 TR Capacity and of any make including taking out unserviceable Capacitor from AC complete all as specified and directed.

M&L in replacement Capacitor Starting 80 mfd – 120 mfd suitable for old ones AC (Window/Split Type) 1.5 TR/2.0 TR/3.0 TR Capacity and of any make including taking out unserviceable Capacitor from AC complete all as specified and directed.

M&L in replacement Fan Motor Blades AC (Window/Split type) 1.5/2.0 TR capacity including taking out unserviceable Blades of Fan Motor from AC complete all as specified and directed.

M&L in replacement Fan Motor Capacitor 4 mfd suitable for new/star rated AC (Window/Split Type) 1.5 TR/2.0 TR/3.0 TR capacity including taking out unserviceable Fan motor capacitor from AC complete all as specified and directed.

M&L in replacement Fan Motor Capacitor 6 mfd suitable for old ones AC (Window/Split Type) 3 TR capacity including taking out unserviceable Fan motor capacitor from AC complete all as specified and directed.

M&L in replacement Front Plastic Grill (as per Sample) of AC (Window type) 1.5 TR/2.0 TR Capacity including taking out unserviceable Front Plastic Grill from AC complete all as specified and directed.

M&L in replacement Front Plastic Grill for inner unit (as per Sample) of AC (Split type) 1.5 TR/2.0 TR Capacity including taking out unserviceable Front Plastic Grill from AC complete all as specified and directed.

M&L in replacement Runner for air blower motor of AC (split type) AC 1.5/2.00TR capacity (As per sample or as per site requirement) including Runner of Air Blower Motor from AC complete all as specified and directed.

M&L in replacement Single Pole Contactor 25A Capacity, MR 11W type suitable for AC (Split Type) including taking out unserviceable Single Pole Contactor complete all as specified and directed.

M&L in replacement Starting Relay of AC (Window/Split Type) 1.5/2.0/3.00 TR Capacity including taking out unserviceable Starting Relay from AC complete all as specified and directed.

M&L in replacement Strainer with Capillary Tube of AC (Window/ Split Type) 1.5/2.0/3.0 TR Capacity (including taking out unserviceable Strainer with Capillary Tube from AC complete all as specified and directed.

M&L in replacement Thermostat Switch of AC (Window/Split Type) 1.5 /2.0/3.0 TR Capacity including taking out unserviceable Thermostat Switch from AC complete all as specified and directed.

S&F in replacement cooling coil suitable for window type room AC 1.5/2 ton capacity including taking out unserviceable cooling coil complete all as specified and directed.

S&F in replacement Condensing coil suitable for window type AC 1.5/2 ton capacity including taking out unserviceable Condensing coil complete all as specified and directed.

S&F in replacement Condensing coil suitable for split type AC 2.0 Ton capacity including taking out unserviceable Condensing coil complete all as specified and directed.

S & F in replacement cooling coil suitable for split type AC 2.0 Ton capacity including taking out unserviceable cooling coil complete all as specified and directed.

S&F in replacement Indoor unit suitable for 1.5 TR split type AC including taking out unserviceable Indoor unit complete all as specified and directed.

S&F in replacement outdoor unit suitable for 1.5 TR split type AC without compressor including taking out unserviceable outdoor unit complete all as specified and directed.

S&F in replacement Indoor unit suitable for 2 TR split type AC including taking out unserviceable Indoor unit complete all as specified and directed.

S&F in replacement outdoor unit suitable 2 TR split type AC without compressor including taking out unserviceable outdoor unit complete all as specified and directed.

Supply & Fix in replacement of hermetically sealed compressor for split/ window type AC capacity 1.5 Ton complete all as specified and directed.

All as per ser item No. 32.00 above but for split/ window type AC capacity 2.0 Ton.

All as per ser item No. 32.00 above but for split type AC capacity 3.0 Ton three phase run.

Taking down/up defective AC 1.5 TR Capacity (Window/Split Type), Transportation from MES Store Yard/Site to Workshop and Back including re-fixing /re-installing after taking out defective/burnt Com-pressor Sealed Unit and providing new Compressor Rotary/ Reciprocating as per site requirment of same Capacity from Authorised Dealer including Flushing of Condenser and Charging with required quantity of appropriate Refrigerant Gas R22/R410 including re-connection of Electric Connections, functioning AC complete in all respect and Testing, complete all as specified and directed. Note:- Compressor shall be procured from authorised dealer and submit purchase vouchers alongwith written guarantee/warantee as per manufacturer.

All as per Item No. 35.00 above but AC 2.0 TR Capacity (Window/Split Type).

M&L in replacement PCB with remote and sensor for window type AC up to 2 Ton capacity including taking out unserviceable PCB complete all as specified and directed .

M&L in replacement PCB with remote including sensor for Split type AC 2.0 to 3.0 Ton capacity including taking out unserviceable PCB complete all as specified and directed .

M&L in replacement PCB & motherboard with remote complete set for Inverter Split type AC up to 2 Ton capacity including taking out unserviceable PCB complete all as specified and directed .

M&L in replacement Remote of AC ( Window/Split Type) 1.5/2.0 TR capacity (As per sample or as per site requirement) all as specified and as directed.

S&F in replacement wiring kit suitable for 1.5 to 2.0 ton capacity AC complete including taking out unserviceable wiring kit all as specified and directed.

M&L for gas charging pin valve complete including taking out unserviceable pin valve all as specified and directed.

Taking out window type AC complete unit from any height/ any floor up to six storey building and shifting to another location in the same or other building in the complex including refixing & reconnection of the unit complete all as specified and directed.

Taking out split type AC complete indoor and outdoor unit from any height/ any floor up to six storey building by including pumping down the gas into the compressor by controlling the suction and discharge valves , disconnecting the suction and dischagre copper piping and shifting to another locatiion in the same or other building in the complex including refixing of the unit complete all as specified and directed.

Supply and charging the gas refrigerant R22 (including refrigerant) of window type AC upto 2 ton capacity including testing after application of nitrogen gas pressure to find out any leakage, brazing and stopping of all leakage detected, re-application of nitorgen pressure to ensure leak proof gas circulator system flushing out the nitrogen gas complete all as specified and directed.

All as per ser item No. 45.00 above but R- 410/32 for split type AC up to 2 TR capacity complete.

All as per item No 45.00 above but VRF unit 7.5 TR capacity complete.

S&F in replacement Hermatically Sealed compressor for 300Ltrs capacity Deep freezer including brazing the sunction and discharge lines complete all specified and dircted. Note:- Compressor shall be procured from authorised dealer and submit purchase vouchers alongwith written guarantee/warantee as per manufacturer

S&F in replacement of casing of window type AC including company fitted condensing & cooling coil suitable for 1.5 TR capacity complete including PCB except compressor complete all as specified and directed.

M&L for replacement of split valve ¼” for split AC up to 2.00 ton capacity complete all as specified and directed.

All as per ser item No. 50.00 above but 1/2".

S&F in replacement compressor shut off valve 3/8" for split AC up to 2.00 ton capacity complete all as specified and directed.

S&F in replacement compressor shut off valve 5/8" for split AC up to 2.00 ton capacity complete all as specified and directed.

S & F in replacement of electrolyte grade copper tubing of size 1/4" suitable for any type of split type AC including synthetic rubber foam complete all as specified and directed. Note : - The quoted rate is inclusive of necessary T&P, Rope, Ladder etc with safety equipment for execution the work upto six stories building.

All as per ser item No. 54.00 above but size 1/2".

All as per ser item No. 54.00 above but size 3/8".

All as per ser item No. 54.00 above but size 5/8".

S&F in replacement High density polyethylene pipes 20 mm dia (HDPE) of pressure rating 6 kgf/cm2 laid in wall/ceiling including all clamps & accessories and connecting the condensate pipe of ACs to this conduit for proper drainout of condensate water from ACs of Bldgs upto 6 (six) storey complete all as specified and directed.

All as per item No. 58.00 above but size 40mm dia

S&F in replacement of synthetic rubber foam for insulation for refrigerant copper piping of existing size 1/4" to 5/8" internal dia split type AC complete all as specified and directed. Note : - The quoted rate is inclusive of necessary T&P, Rope, Ladder etc with safety equipment for execution the work upto six stories building.

S&F in replacement Hermatically Sealed compressor for 40/80 Ltrs capacity water cooler including brazing the suction and discharge lines complete all specified and dircted.

S&F in replacement Hermatically Sealed compressor for 60/120 Ltrs capacity water cooler including brazing the suction and discharge lines complete all specified and dircted.

S&F in replacement metal plug top Single pole & Neutral and earth, 20 Amps, 240 volts suitalbe for sheet metal enclosures complete all as specified and directed.

S&F in repalcement metal enclosures with clad socket & plug top Single pole and neutral enclosure with a two pin and earth plug and socket complete including of MCB SP 25 Amps 240 volts complete all as specified and directed.

S&F in repalcement metal enclosures with clad socket & plug top Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB complete including of MCB TP 63 Amps 240 volts complete all as specified and directed.

S&F in replacement of PVC insulated flexible copper conductor 3 core 1100 volts grade of size 2.50 Sqmm cable complete all as specified and directed.

S&F in replacement of PVC insulated flexible copper conductor cable 1100 volts grade, 3 core of size 1.5 Sqmm cable complete all all as specified and directed.

M&L in replacement for submain wiring including PVC conduit 2 run 4.00 Sqmm cable PVC insulated copper conductor multi - stranded as per FRLS cable drawn through PVC conduit 20mm dia mediam duty with all accessories including 4.0 Sqmm multi stranded copper conductor cable PVC insulated unsheathed for earth continuity connected to common earth dolly and all as specified . Note:- 3 RM of 4 Sqmm cable & 01 RM of PVC conduit shall be measured as per one RM.

S&F in replacement AC stand suitable for out door AC unit (split/cassette type) capacity of 2.0/3.0 TR of mild steel of angle iron 40x40x6mm including fixing arrangements like welding, fabrication and nuts & bolts etc upto six stories building complete all as specified and as directed Note:- Compressor shall be procured from authorised dealer and submit purchase vouchers alongwith written guarantee/warantee as per manufacturer.

S&F in replacement reverse valve system made of copper for heating option suitable for 1.5/2.0 ton split / window type AC complete all as specified and as directed.

All as per item No. 71.00 above but but capcity 120/150 Ltrs

M&L for servicing of water cooler of any capacity (40 Ltrs to 150 Ltrs) including cleaning of water cooler from inside and outside with potassium permaganates, servicing of cooling coil, fan, motor, condensor, fan blades and its connected water and refrigerant fittings complete all as specified and directed.

Supply and charging the gas in the water cooler of any make and capacity up to 150 ltrs capacity including testing and detecting leakage if any with nitrogen gas and vaccum the system after rectification of all leakages complete all as specifie and directed.

S&F in replacement thermostat switch suitable for water cooler of any make & size complete all as specified and directed.

S&F in replacement starting relay/over load relay suitable for water cooler of any make & size complete all as specified and directed.

S&F in replacement defective push cock 15 mm bore chromium plated heavy duty suitable for water cooler of any make and capacity complete all as specified and directed.

M&L for preparation of old painted surfaces of water cooler of upto capacity 150 Ltrs by removing old deteriorated paint, making surfaces smooth and applying two coats of synthetic enamel paint by spray painting complete all as per specified and direction.

S&F in replacement fan motor ISI marked suitalbe for water cooler as per existing capacity upto 150 ltrs of any make complete all as specified and directed.

S&F in replacement of condenser fan of any make suitable for water cooler upto 150 ltrs capacity complete all as specified and directed.

S&F in replacement 15 mm dia PVC connection of length upto 600mm with PTMT nuts on both ends complete all as specified and directed.

S&F in replacement condenser coil suitable for water cooler upto 150 ltrs capacity complete all as specifed and directed.

S&F in replacement steel waste water tray suitable for water cooler upto 150 ltrs capacity complete all as specifed and directed.

M&L for servicing of desert cooler of any size including cleaning of desert cooler from inside & outside repair/replacement of defective/unserviceable parts, i.e. fan kit, motor, water pump and connected accessories complete all as specified and directed. Note : Unserviceable parts required for replacement shall be measured and paid separately as supply only under respective items of this schedule.

M&L for painting of desert cooler capacity upto 4000 Cfm with one coat of approved synthetic enamel paint inside & outside including fan/fan blade/brackets after scrapping the rust,peal of paint and preparation of surface complete all as specified and directed Note : The rates are inclusive of taking down cooler from any height, removal to workshop for painiting and refixing in position after painting.

supply only of desert cooler sub mersible water pump complete with electric motor single phase 230 volts 50Hz including lead, connecting & testing complete all as specified and directed.

supply only for desert cooler fan motor,copper wound suitable for upto 450mm sweep including metal fan blades SP 230 volts 50HZ including legs, rubber bush nuts/bolts for fixing of fan motor complete with connection & testing complete all as specified and directed.

S&F in repalcement of commercial ply wood BWP 4mm thick ISI marked for desert cooler of any size to close the opening between desert cooler grill and window complete all as directed

S&F in replacement old unservicable plug top 3 pin 5 Amps complete all as specified & directed.

S&F in replacement of old unserviceable plug top 3 pin 15 Amps complete all as specified and directed

S&F in replacement of old unserviceable motor capacitor 2.5/3.15/4 mfd complete all as specified and directed.

S&F in replacement of old unserviceable front grill made of MS complete with air guide vanes suitable for desert cooler of capacity 4000 Cfm complete all as specified and directed.

S&F in replacement of old unserviceable body without side panels made out of galvanised iron sheets of 22 gauge for bottom tank & 20 gauge for top cover of desert cooler body duly painted with red-oxide primer & 2 coat of synthetic enameled paint complete with fixing of all spare & accessories complete all as specified & directed

S&F in replacement of old unserviceable body made out of stainless steel sheets of 22 gauge for bottom tank & 20 gauge for top cover of water cooler body duly painted with red-oxide primer & 2 coat of synthetic enameled paint complete with fixing of all spare & accessories complete all as specified & directed

S&F in replacement of old unserviceable side panels of desert cooler body of 22 gauge of existing size & shape duly painted with red-oxide primer & 2 coat of synthetic enameled paint complete all as specified & directed

S&F in replacement of float valve assembly with PTMT ferrule 15 mm dia and PVC ball valve suitable for water cooler up to 150 ltrs capacity and desert cooler upto 4000 Cfm complete all as specifeid & directed

S&F new wood wool pad,(Khus Khas) set of three covered by GI wire mesh suitable for desert cooler including taking out the old unserviceable existing pad complete all as specifed & directed

M&L for replacement of old unserviceable switch piano, flush type single pole, one way, 5 Amp 230 V AC ISI Marked complete all as specifed and directed

M&L for replacement of old unserviceable aluminium aloy multi wing Fan blade, best quality as per existing type and size suitable for desert cooler complete all as specifed and directed

Taking down Ceiling fans/exhaust fans/Wall fans, sealing cable end, dismantling blades and removing fan and blades & deposited to E/M store yard and refixing the same at site after necessary repair work complete all as specified and directed.

M & L for overhauling of ceiling fan/pedestal/exhaust/table/aircirculating fan of any size or make opening the fan motor, overhauling by removing dust from field coils including varnishing of field coils and greasing from motor with superior qauality grease for smooth running inlcuding cleaning and washing the blades and assembling of fan motor and refixing at the same location complete all as specified and directed.

M & L for removing of burnt out winding wire from ceiling fan of any make of size 1200/1400 mm sweep including cleaning of slots etc and rewinding with super enameled copper winding wire as per existing size/gauge including insulating material and varnishing complete all as specified & directed.

All as per item srl No 102.00 above but for exhaust fans of size 300 mm sweep to 380 mm sweep

All as per item srl No 102.00 above but for pedestal fan/Air circulator fan of size 400 mm to 600 mm sweep.

All as per srl item No 102.00 above but for table fan/wall mounted fan of 450 mm sweep Note for item srl No 102 to 105 :- (i) Defective fans shall be collected from MES stores and deposit the same after necessary repair work. (ii) Painting & replacement of defective ball bearings and rubber seal shall be measured and paid separately under relevant items.

M & L for replacement of defective ball bearing for ceilng/table/pedestal/ Air-circulators fan of size 6201/6202 complete all as specified & directed

All as per srl item No 106.00 above but for exhaust fan of size 6203/6204 .

M & L for replacement of old unserviceable rubber real of suitable size for ceiling fan complete all as specified and directed

M & L for replacement of old unserviceable gun metal bush suitable for any type/model/size of fans complete all as directed.

S&F in replacement of old unserviceable fan step regulator, modular type 120W, 2 Module complete all as specified & directed

M & L for painting of ceiling fans any make and size at site with one coat of superior quality synthetic enameled paint of approved make & colour by spraying after filling cavities with filler and preparation of surface including marking complete all as specified & directed.

All as per item No 111.00 above but exhaust fan/wall fans/Pedestral fans of size 300 mm to 450 mm sweep.

M & L in replacement of old unserviceable PVC canopy suitable for 1200 /1400 mm sweep ceiling fan complete all as specified & directed

S&F in replacement of old unserviceable voltage stabilizer 4 KVA suitable for window/split type AC of capacity upto 1.5 TR working on AC 240 V,50Hz single phase all as specified and as directed.

S&F in replacement old unserviceable voltage stabilizer 5 KVA suitable for window/split type AC of capacity upto 2 TR working on AC 240 V,50Hz single phase all as specified and as directed.

S&F in replacement of old unserviceable wall mounted fan high speed 450mm sweep working on AC 240 V,50Hz, single phase copper winding complete all as specified and as directed.

S&F in replacement of old unserviceable Pedestal fan 450mm sweep working on AC 240 V,50Hz, single phase copper winding all as specified and as directed.

S&F in replacement of old unserviceable exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, frame and GI louvers copper winding complete all as specified and as directed.

S&F exhaust fan in replacement of old unserviceable made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as specified and as directed.

Supply and fixing in replacment of old unserviceable ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) copper winding complete all as specified and as directed .

All as per item 120.00 above but 1400 mm sweep, min air delivery 245 CFM

Taking down of geyser of capacity 25 ltrs after dissconnecting the water and electric connections etc complete all as directed and S&F in replacment of old unserviceable stainless steel tank with assembly to make the geyser fully functional and refixing the same at its orignal position complete all as specified and as directed. .

All as per ser item No. 122.00 above but capacity 50 ltrs.

S&F in replacement of old unserviceable Heating element triangle/round type as existing of capacity 1.5KW of Hot appliances complete all as per specified and directed. .

All as per ser item No. 124.00 above but capacity 2KW.

S&F in replacement of old unserviceable thermostate as per existing of capacity 25/50 ltrs of Hot appliances complete all as specified and directed.

Supply and fixing in replacement old unserviceable Oil Room Heater 2900 Watt Suitable for 11 Fin,weight 18 Kg with fan complete all as specified and directed.

Supply and fixing in replacement of old unserviceable indicator light (Red & Green) as per existing of capacity 25/50 ltrs of Hot appliances complete all as specified and directed.

S&F in replacement of old unserviceable shut off valve as per existing of capacity 25/50 ltrs of Hot appliances complete all as specified and directed. .

S&F in replacement of old unserviceable Thermo insulation glass wool as per existing of capacity 25/50 ltrs of Hot appliances complete all as specified and directed. .

S&F in replacement of old unserviceable water connection CP for inlet & outlet (Hot & Cold) as per existing of capacity 25/50 ltrs of Hot appliances complete all as specified and directed. .

S&F in replacement of old unserviceable Heater suitable for double door refrigerator capacity 299/310 Ltrs complete all as specified and directed.

S&F in replacement of old unserviceable PVC distributors, PVC elbow & PVC Pipe best quality 15mm dia for desert cooler complete all as specifed and directed.

S&F in replacement of old unserviceable Angle valve 15 mm dia cast copper alloy, screwed down, high pressure,with crutch handle,but fancy type, chromium plated and fixed complete all as specifed and directed.

Supply and fixing electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated, connecting & testting in replacment of old unserviceable complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specifed and directed.

All as per item srl No 135.00 above but 50 ltrs capacity

Note for ser item No. 1 to 136 :- 1. The contractor shall provide and deploy sufficient technicians with helpers(as directed by Engineer-in-charge/JE E/M). Contractor's site supevisor/site engineer shall report at 0900 hrs daily excluding Sunday & Gazetted holiday to collect the complaints job card & complete the same complaint detailed by JE/Engineer-in-charge with in 48 hrs. 2. The complaints shall be attended with in 48 hrs. If the complaints is/are not attended /not completed on same day (except repair/ replacement of major items like replacement of compressor, cooling coil, condensing coil and fan motor etc.) recovery will be done as follows:- (a) After 48 Hrs, Rs.1000/- Per complaint per day. The decision of GE on recovery against penalty shall be final and binding and No representation whatsoever shall be entertained. 3. The technicians for repair of summer appliances can be called during non-working days/hrs (i.e. Sunday, Holidays & after working hrs) for any vital complaint at DRDO area and no extra payment will be made on this account. 4. The contractor shall be produce machine number job card duly signed by user duly satisfactory completion of job & JE E/M to Engineer-in-charge before claiming payment. In absence of this the recovery @Rs. 100/- for per complaint will be made from the contractor's dues.

ALPHA ENGINEERS AND BUILDERS