REPLACEMENT OF AC PLANT AT SHED NO. 24 AT AF STATION AMLA

Amount

Addition/ Alteration

Dismantling Asbestos cement corrugated or semi corrugated, etc.sheets as in roof coverings complete all as specified and directed.

Dismantling unframed timber work scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.

Taking down timber roof trusses exc 4.0m clear span and upto 8.0m complete all as specified and directed.

Dismantling mild steel work of any description not otherwise provided for complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm each all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm and not exc 4.0 sqm each all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.

Demolition of unreinforced Cement Concrete in ground floors and paving's exc 15cm thickness (below or above ground level) all as specified and directed.

Demolition of reinforced Cement Concrete of any description in any position as in fire symbol boards including cut to reinforcement to facilitate demolition complete all as specified and directed

Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water, etc all as specified and directed.

Excavation in trenches, not exc 1.5 mtr wide and not exc 1.5 mtr in depth, in soft/loose soil for foundations or shafts, wells, cesspits manholes, pier holes etc not exceeding 10 sqm on plan and getting out complete all as specified and directed.

All as per Item No.11 herein before but depth exc 1.5m and not exc 3.0m complete all as specified and directed.

Excavation in trenches, not exc 1.5 mtr wide and not exc 1.5 mtr in depth, in any type of soil for taking out pipe/ cables/ earthing and earth lead etc and getting out complete all as specified and directed.

Material and labour for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed

Material and labour for hard core (broken stone or boulders) of gauge not exceeding 63mm , deposited, spread and levelled in layers n.exc, 15cm thick, watered and rolled/rammed to a true surface, complete all as specified and directed

Material and labour for 100mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed

Excavation in post holes (or similar holes) each not exc 0.5 cum,in soft/ loose soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm all as specified.

Material and labour for plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified.

M & L for use and waste of formwork to sides of concrete foundation,footings, column bases, plinth beams complete, for a rough finished surfaces all as specified and directed.

Material and labour for RCC M-25 (design mix) using 20 mm graded stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

Material and labour for Steel reinforcement TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending, hooking ends, binding with and incl mild steel wire annealed not less than 0.9 mm dia complete all as specified and directed.

All as per item No.21 above but 5 mm dia and over upto and including 10mm dia as in stirrups complete all as specified and directed.

M & L for Use and waste of form work to sides of pillars, posts, struts, columns and stanchions etc for rough finished surface of concrete flat complete all as specified and directed.

Material and labour for RCC M-25 (Design mix) using 20 mm graded stone aggregate as in columns, pillars, posts, piers and struts etc complete all as specified and directed.

M & L for Use and waste of form work to sides & soffits of floor or roof beams, beam haunchings, girders, bressumers, lintels, cantilevers, shelves incl. supports, overhangs etc, also splays between floor & beam etc rough finished surface of concrete flat complete all as specified and directed.

Material and labour for RCC M-25 (Design mix) using 20 mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5 m span etc. complete all as specified and directed.

Supply & Fix rolled mild steel in roof trusses (framed) trussed purlins including distance pieces, cleats etc complete Fe-410-W (Grade-E-250) quality A complete all as specified and directed.

Supply and fix Mild steel bolts exc 16 to 20mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5cm long complete all as specified and directed.

Supply and fix Mild steel bolts, exc. 20mm but not exc 25mm dia, purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square not exc. 30cm long complete all as specified and directed.

Supply and fix MS 40x6mm for wind ties for roof to be fix with self drilling screws complete Fe 290 and of grade E-165 complete all as specified and directed.

Material & Labour for use and waste of formwork to edges of concrete flats, treads, breaks in floors, sides of shelves and slabs etc exc 5cm but not exc 10cm wide for rough finished surface complete all as specified and directed.

Dismantling wall and ceiling boarding (fibre, pulp insulation etc) or insulation boards/ slabs/ blankets any thickness including cover fillets complete all as specified and directed.

Material and labour for MS Framed work as in sign board or doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding or seel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete of grade Fe-410W (grade E-250) quality A complete all as specified and directed.

Supply and fix Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St.-240 complete all as specified and directed.

M&L for providing precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in fire symbol posts and similar articles with plain faces set in cement mortar 1:4 complete all as specified and directed.

M & L for brick work with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and direceted.

All as per item No.36 herein before but except bricks. Note : Bricks obtained from demolition of brickwork shall be used.

Material & labour for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick/ concrete surfaces and finishing the surfaces even and smooth without using extra cement using water proofing compound @ 3% by weight of cement complete all as specified and directed. Note: WPC shall be measured and paid separately)

Supply only integral water proofing compound

Material and labour for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surface to be finished even & smooth without using extra cement all as specified and as directed.

Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer over new steel surfaces and iron of any description, exceeding 10 cm width or girth including preparation of new steel surfaces all as specified.

Material and labour for preparation of new concrete surfaces of fire symbol posts and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

Writing letters or figures (numbers, Block. Roman, Italic or Indian) n exc. 30 cm high painted with fluorescent paint of any colour complete all as specified and directed.

Material and labour for PCC 1:2:4 type B2 using 40mm graded stone aggregate as in foundation etc complete all as specified and directed.

Supply and fix Framed work grade Fe-410W (Grade-E-250) quality B as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet with base metal thickness of sheet not less than 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix Pre- painted galvatume aluminum zinc coating GI based plain steel sheet with base metal thickness of sheet not less than 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering in ridges/cladding to wall and eaves gutter fixed with self tapping screws as specified as specified and directed.

Material and labour for applying two coats of oil emulsion distemper including chalk whiting over 3mm thick wall care putty on newly plastered wall surfaces after all necessary preparation all as specified and directed.

Material and labour for applying two coats of cement based paint over a coat of primer on new plastered wall surfaces after necessary preparation complete all as specified and directed.

Material and labour for 200mm thick Cement concrete work in pavement/ hard-standing of flexural strength 40kg/per square centimetre in field using 400 kg of cement per cubic metre complete all as specified and directed.

Labour for tremix flooring for spreading, screeding, dewatering, floating and trowelling with the help of power trowelling floated etc complete all as specified and directed.

M&L for Forming 200x 12mm wide Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ complete all as specified and directed.

M&L for Forming 65mm deep x 10mm wide Contraction (Dummy) joints, filled with sealing compound grade A complete all as specified and directed.

Material and labour for PCC 1:2:4 type B0 using 12.50mm graded stone aggregate as in filling gap of wall and roof sheet including using formwork complete all as specified and directed.

Supply and fix anodised aluminium snap grid of size 605x605mm frame for false ceiling including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long including 12mm thick Gypsum board in ceiling fixed with screws on snap grid as per manufacturer's instructions complete all as specified and directed.

Supply and fix 3mm thick aluminium sheet bonded with blue retro reflective sheeting of engineering grade having pressure sensitive adhesive, white retro reflective cut out bonds, letters, arrows including fixing to angle frame with rivets complete all as specified and directed.

All as per item No.56 herein before but as border of width 15mm complete all as specified and directed.

Material and labour for writing letter of figure (Block Roman, italic English or hindi, Arrows, Dashes etc) exc 5cm high and not exc 15cm of white retro reflective sheet of thickness 0.3mm fixed on blue retro reflective sheeting of engineering grade having pressure sensitive adhesive complete all as specified and directed.

All as per item No.58 herein before but exc 15cm and not exc 20cm complete all as specified and directed.

Supply and fix 160mm dia PVC rain water pipe with all fittings (i.e bends, sockets/ GI clamps, bolts & nuts etc) fitted at top at collar attached to valley gutter complete all as specified and directed. Note: No separate/ additional rate shall be paid for making color to the valley gutter.

Raised pointing to random rubble masonary built in CM 1:4 including racking out joints in existing stone masonary complete all as specified and directed.

Material and labour for providing PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in cills, steps; bands, bed plates, kerbs, coping and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed

Returning, filling in trenches including spreading levelling, watering and well ramming in layers not exc 25cm thick in each layer of soil complete all as specifed and directed.

Removing excavated surplus soil to a distance not exceeding 50 mtr and not exc 250m and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as directed.

AREA DRAINAGE

M & L for brick work with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and direceted.

Material and labour for providing PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping including necessary formwork complete all as specified and directed

Material and labour for providing PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in surface channel and drain complete all as specified and directed

Extra for forming fair finishing to channels or drains, 30 cm inner girth in cement concrete including form, moulds, mitred/ stopped ends etc., complete all as specified.

Material and labour for providing PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in bed concrete to drain, laid to slope complete all as specified and directed

Internal Electrification (Flame proof fitting)

Material and labour for flame proof point wiring using approved colour coding as per IS with 1.5sqmm two nos single core PVC insulated but unsheathed FRLS cable, 1100 volts grade, ISI-694 marked with multistranded copper conductor and earth continuity wire with similar 1.5 Sqmm cable (including connecting to earth dolly) drawn through heavy duty ISI marked ERW stove enamelled, steel conduit concealed in wall suitable for flame proof wiring, not less than 20mm dia with and including flame proof bends and elbows, couplers, bell mouth reducer, junction box all as per relevant IS and type tested / approved by CMRI Dhanbad all as specified for one light point/ power point/ fan point controlled by FLP rotatory switch complete all as specified and directed.

Supply and fix CMRI certified LED flame proof 40watt bulkhead/ well glass luminaire die cast aluminium housing with heat resistant toughened glass recommended for ammunition shed, IP 65 protection complete with all accessories internally prewired and including connecting complete all as specified and directed. Make: Crompton greaves Cat No. FWL1315-40-CDL CG/HB or equivalent in Sudhir

Supply and fix CMRI certified LED flame proof 2x16/20W, tube light fixture, recommended for ammunition shed, IP 65 protection complete with all accessories internally prewired complete all as specified and directed. Make: Crompton greave Cat No. EXTN2LT8 or equivalent in Sudhir

Supply and fix flame proof switch rotary type singe pole one way 16 Amps 230 Volts including MS box, complete all as specified and directed.

Material and labour for plate earthing complete with galvanized mild steel plate electrode 60cmx 60cmx6mm thick buried directly in ground vertically (in earth pit not less than 2.25m below normal ground level) with the top edge of the earth plate at a depth not less than 1.5m below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all sides and including GI strip 25x4mm bolted (with GI nuts, bolts & check nuts) and riveted to earth plate at one end and connected to metallic bodies of equipments etc at the other end, earth strip encased in and including 40mm bore GI light grade pipe with all fittings from top of electrode to body of equipment fixed with and including 25x4mm flat iron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI pipe medium grade from bottom of earth pit to top of electrode complete with wire mesh, funnel and earth pit in PCC 1:2:4 type B-0 using 12mm graded crushed stone aggregate and CI cover 10mm thick hinged to CI frame complete all as specified and shown in electrical plate No-3 of SSR Part I complete all as specified and directed.

Notes: (a) Rates for excavation and earthwork in any type of soil/ strata, testing on completion, GI strip 25x4mm and 40mm dia protection pipe upto 7.5m from earth plate is deemed to be included in quoted rate. (b) On testing after completion if less than 5 Ohm earth resistance is not obtained the earthing shall be redone at no extra cost.

Supply and fix weather proof, flame proof distribution board approved by CMRI Dhanbad of cast aluminium alloy LM-6 MCB type TPN 4 way with 40 Amps TPN, rotary switch as incomer and MCB SP C Series 10KA 6-32 Amps- 8 Nos and TP 16A-01Nos as outgoing complete all as specified and directed.

Material and labour for GI strip 25mm x 4mm buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. connected upto test terminal point etc complete including fixing with saddles and screws for fixing porcelain/ epoxy insulators/ conduit/ pipe complete all as specified and directed.

Lightening Protection

Material and labour for plate earthing including taking down old earthing complete with galvanized mild steel plate electrode 60cmx 60cmx6mm thick buried directly in ground vertically (in earth pit not less than 2.25m below normal ground level) with the top edge of the earth plate at a depth not less than 1.5m below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all sides and including GI strip 32x6mm bolted (with GI nuts, bolts & check nuts) and riveted to earth plate at one end and connected to metallic bodies of equipments etc at the other end, earth strip encased in and including 40mm bore GI light grade pipe with all fittings from top of electrode to body of equipment fixed with and including 25x4mm flat iron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI pipe medium grade from bottom of earth pit to top of electrode complete with wire mesh, funnel and earth pit in PCC 1:2:4 type B-0 using 12mm graded crushed stone aggregate and RCC cover complete all as specified and shown in electrical plate No-3 of SSR Part I complete all as specified and directed.

Notes: (a) Rates for excavation and earthwork in any type of soil/ strata, testing on completion, GI strip 32x6mm and 40mm dia protection pipe upto 7.5m from earth plate is deemed to be included in quoted rate. (b) On testing after completion if desired earth resistance is not obtained the earthing shall be redone at no extra cost.

Supply and fix single pointed air termination aluminium rod 12mm dia, 300mm long complete all as specified and directed.

Material and labour for Aluminium strip of size 25x4mm as earth continuity conductor or main earthing lead fixed to wall, on batten/ porcelain/ epoxy insulators or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing etc connected upto test terminal point etc complete including fixing with saddles and screws for fixing porcelain/ epoxy insulators/ conduit/ pipe all as specified and directed. Note: Insulators/ conduit/ pipe shall be measured and paid seperately.

All as per item No.79 herein before but Galvanized iron strip of size 32x6mm

Material and labour in replacement for test point terminal block made of gun metal or phosphorous bronze size 75x75x25mm drilled and screwed including 3nos 8mm dia 25mm long, hexagonal head screw and connected to copper/ aluminium/ GI strips complete housed in a PVC junction box complete all as specified and directed.

Supply and fix ready made type PVC junction box IP 65 of size 200mm x 160mm x 98mm having shutter & lifting knob with provision of earthing strip entry glands and fixed the box on wall/ poles with suitable size of nut, bolts and washers complete all as specified and directed. Make: Cat Part No. K9250 of make Hensel or equivalent in Sintex or equivalent in specified makes.

Supply and lay in trenches / fixed to walls PVC super quality pipe 40mm dia heavy grade for protection of earth strip complete with all fittings fixing with suitable clamps at 0.5m span complete all as specified and directed. Note: Rates for flat iron clamps, bolts, nuts and washer etc are deemed to be included in the quoted rate.

Supply and fix tubes, light grade, galvanized 40mm dia with all fittings laid in trenches/ fixed as AL rod stand post etc complete all as specified and directed

Material and labour for PCC block 300mm x 300mm x 300mm in 1:2:4 type B-1 using 20mm graded stone aggregate for AL AT rod stand post on roof including necessary formwork complete all as specified and directed.

Material and labour for plate earthing including taking down old earthing complete with copper plate electrode 60cmx 60cmx3.15mm thick buried directly in ground vertically (in earth pit not less than 2.25m below normal ground level) with the top edge of the earth plate at a depth not less than 1.5m below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all sides and including copper strip 20x3mm bolted (with GI nuts, bolts & check nuts) and riveted to earth plate at one end and connected to metallic bodies of equipments etc at the other end, earth strip encased in and including 40mm bore GI light grade pipe with all fittings from top of electrode to body of equipment fixed with and including 25x4mm flat iron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI pipe medium grade from bottom of earth pit to top of electrode complete with wire mesh, funnel and earth pit in PCC 1:2:4 type B-0 using 12mm graded crushed stone aggregate and RCC cover complete all as specified and shown in electrical plate No-3 of SSR Part I complete all as specified and directed.

Notes: (a) Rates for excavation and earthwork in any type of soil/ strata, testing on completion, copper strip 20x3mm and 40mm dia protection pipe upto 7.5m from earth plate is deemed to be included in quoted rate. (b) On testing after completion if desired earth resistance is not obtained the earthing shall be redone at no extra cost.

Material and labour for copper strip 20x3mm as in earthing complete all as specified and directed.

Air Conditioning

Dismantling of existing unserviceable AC plant of capacity 25 TR with 50% stand by complete with compressors, Electric motors, controls, monoblock pump set, cooling tower, electric panels , make up water tank, ducting, piping with all control valves, cables from electric panel to all equipment, AHU including breaking of foundation of existing plant etc and making good the distrubed surface of wallroof to match with existing and removing dismantled material from site and depositing to MES store complete all as specified and directed

Design, supply, install , commission and testing of air cooled air conditioning plant DX type to maintain the temperature at 23±50 C and humidity at 60±5% with 2 fresh air changes per hour, round the clock( for 24 hrs) with 50% stanby capacity at a explosive storage shed having dimensions 75.5mtx12.5mtx3.8mts in airforce station, Amla. ( The building has 5mts height with galvalum sheet covering and false ceiling with gypsum board at 3.8mt height). The capacity of AC plant is worked out 34TR by the department. However contractor has to visit the building to ascertain the heat loads based on user data sheet attached , type of construction and orientation of building, design the plant based on following parameters and execute the the work on approval by department. DETAILS AS PER APPENDIX 'A-1' to BOQ on ser page no . 28 & 29

Design, supply, fabricate and install air distribution system through insulated supply air ducts above false ceiling and diffusers. Contractor has to submit complete layout of ducts, sizes and pressure drop calculations for approval. It shall be ensured that air is distributed equally in entire hall and no hot spots exist. Return air shall be drawn through opening in the AHU room. Air distribution shall comprise of the following equipment and they will be measured and paid against each item DETAILS AS PER APPENDIX 'A-2' to BOQ on ser page no . 73

Electrical panel, factory made, CPRI approved, cubicle type , floormounted, indoor type made out of2mm thick CRCA sheet and the internal compatments along with doors with 1.6mm thick sheet , dust and vermin proof duly powdercoated with copper bus bars 300A-3 Nos for phases and 150A for neutral cable allies on both sides and comprising of the following at AHU:- (i)MCCB 4 pole 200A, 35KA breaking capacity-1No(incomer) (ii)MCCB 4pole 40A,16KA-10Nos( 6 for condensor units,1for blower,3 spare) iii) MCCB 4Pole 63A, 16KA -1 No for Hot water generator iv) MCB TP 16A-1No for hot water pump (v)MCB SP 10A for humidification pump (vi) Dol starters for AHU motor, Hot waper pump and humidification pump with auxillary contacts as required for control wiring and for auto start,and with over load protection of suitable capacities of motors (vii) Set of multi function meters with CTS and LED indication lamps for each incoming and out going MCCB-12Nos in total (viii) Electronic energy meter(KWH) with digital display -1No

Earthing complete with GI earth plate electrode 600x600x6mm buried directly in ground vertically to a depth of not less than 2.25mtr below ground level with top edge of earth plate at a depth of not less than 1.5mtr below ground level connected to GI earth strip of 32x6 mm Necessary excavation and earth work PCC 1:3:6 type C1 using 20mm graded stone aggregate earth chamber 40mm thick RCC cover type B1 (1:2:4) B1 using 20mm graded stone aggregate etc complete all as shown in electric plate No.5 of MES Sch part I and testing after completion. GI strip up to test point is covered under this item.Extra strip will be measured and paid separatly.

Supply and fix GI strip 32x6 mm

Galvanised steel pipe 40mm , light grade for protection

Note: The amount against Schedule of Credit on Page No.55 shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance.

MANNING & OPERATION

AC Plant No-24 Outsourcing for operation of central type AC Plant Air cooled, DX type of appx capacity 34 TR (4X8.5 TR working and 2x8.5 TR standby) installed at shed No. 24, Air Force Stn, Amla around the clock (24 Hrs) on all days in three shifts (per shift of 8 hrs) with one skilled operator per shift complete to operate the palnt, humidifier, heating equipment, taking the reading of temperature and humidty cleaning filter as when required in respect of the equipment complete with all accessories and specified of shed No. 24 for first year (2021-22) after sucessful completion of Phase - I Detail of equipments at sheds No. 24 :- (1) Condensing unit, air cooled-6Nos or as per designed. (2) AHU- 1 No (3) Hot water generator with pump - 1 set (4) Humidification pump (5) LT Panel Board.

AC Plant No-24 Outsourcing for operation of central type AC Plant Air cooled, DX type of appx capacity 34 TR (4X8.5 TR working and 2x8.5 TR standby) installed at shed No. 24, Air Force Stn, Amla around the clock (24 Hrs) on all days in three shifts (per shift of 8 hrs) with one skilled operator per shift complete to operate the palnt, humidifier, heating equipment, taking the reading of temperature and humidty cleaning filter as when required in respect of the equipment complete with all accessories and specified of shed No. 24 for Second year (2022-23) after sucessful completion of Phase - I Detail of equipments at sheds No. 24 :- (1) Condensing unit, air cooled-6Nos or as per designed. (2) AHU- 1 No (3) Hot water generator with pump - 1 set (4) Humidification pump (5) LT Panel Board.

AC Plant No-24 Outsourcing for operation of central type AC Plant Air cooled, DX type of appx capacity 34 TR (4X8.5 TR working and 2x8.5 TR standby) installed at shed No. 24, Air Force Stn, Amla around the clock (24 Hrs) on all days in three shifts (per shift of 8 hrs) with one skilled operator per shift complete to operate the palnt, humidifier, heating equipment, taking the reading of temperature and humidty cleaning filter as when required in respect of the equipment complete with all accessories and specified of shed No. 24 for Third year (2023-24) after sucessful completion of Phase - I Detail of equipments at sheds No. 24 :- (1) Condensing unit, air cooled-6Nos or as per designed. (2) AHU- 1 No (3) Hot water generator with pump - 1 set (4) Humidification pump (5) LT Panel Board.

AC Plant No-24 Outsourcing for operation of central type AC Plant Air cooled, DX type of appx capacity 34 TR (4X8.5 TR working and 2x8.5 TR standby) installed at shed No. 24, Air Force Stn, Amla around the clock (24 Hrs) on all days in three shifts (per shift of 8 hrs) with one skilled operator per shift complete to operate the palnt, humidifier, heating equipment, taking the reading of temperature and humidty cleaning filter as when required in respect of the equipment complete with all accessories and specified of shed No. 24 for Fourth year (2024-25) after sucessful completion of Phase - I Detail of equipments at sheds No. 24 :- (1) Condensing unit, air cooled-6Nos or as per designed. (2) AHU- 1 No (3) Hot water generator with pump - 1 set (4) Humidification pump (5) LT Panel Board.

AC Plant No-24 Outsourcing for operation of central type AC Plant Air cooled, DX type of appx capacity 34 TR (4X8.5 TR working and 2x8.5 TR standby) installed at shed No. 24, Air Force Stn, Amla around the clock (24 Hrs) on all days in three shifts (per shift of 8 hrs) with one skilled operator per shift complete to operate the palnt, humidifier, heating equipment, taking the reading of temperature and humidty cleaning filter as when required in respect of the equipment complete with all accessories and specified of shed No. 24 for Fifth year (2025-26) after sucessful completion of Phase - I Detail of equipments at sheds No. 24 :- (1) Condensing unit, air cooled-6Nos or as per designed. (2) AHU- 1 No (3) Hot water generator with pump - 1 set (4) Humidification pump (5) LT Panel Board.

COMPREHENSIVE MAINTAINANCE

Comprehensive Maintanance of AC Plant Installed (in Shed No. 24) for a period of 12 Months as Specified (First Year after Expiry of Defects Liability Period).

Note :- (a) The Contractor/firm will produce the maintence schedule reqd for maintainaning the AC plant from OEM. (b) The maintenance schedule will strictly adhere to the schedule as advised by the OEM. The record for the same will be maintained. (c) The Contractor/firm will maintain all the plants is good working condition without any break down. Contractor in advised to maintain the vigorous maintenence schedule to avoid any breakdown and send the maintence person regularly and also strore the spare parts so that any breakdown is attended promptly . In case the Contractor is failed to maintain the AC in good working condition, Contractor will be liable to pay penalty to the department (Refer penally rates are reflected in PS). (d) The comprehensive maintenance schedule may includes all the spare parts/defective equipment including the consumable which are reqd for regular maintenance of the AC. The contractor will not claim anything extra for these equpt and also to bear all defects arising during the period. (e) 1ST year comprehensive maintenence shall start immedately after satisfactory completion of expriy of Defect liability period as certified by GE, which is included in the original contractor. (f) Comprehensive maint for first year after certified date of completion is deemed to be included in quoted rate of item pertainig to the AC plant which is to be provided by contractor. No extra payment shalll be made on this account.

Comprehensive Maintanance of AC Plant Installed (in Shed No. 24) for a period of 12 Months as Specified (Second Year after Expiry of Defects Liability Period).

Note :- (a) The Contractor/firm will produce the maintence schedule reqd for maintainaning the AC plant from OEM. (b) The maintenance schedule will strictly adhere to the schedule as advised by the OEM. The record for the same will be maintained. (c) The Contractor/firm will maintain all the plants is good working condition without any break down. Contractor in advised to maintain the vigorous maintenence schedule to avoid any breakdown and send the maintence person regularly and also strore the spare parts so that any breakdown is attended promptly . In case the Contractor is failed to maintain the AC in good working condition, Contractor will be liable to pay penalty to the department (Refer penally rates are reflected in PS). (d) The comprehensive maintenance schedule may includes all the spare parts/defective equipment including the consumable which are reqd for regular maintenance of the AC. The contractor will not claim anything extra for these equpt and also to bear all defects arising during the period. (e) Second year comprehensive maintenence shall start immedately after satisfactory completion of expriy of Defect liability period as certified by GE, which is included in the original contractor. (f) Comprehensive maint for Second year after certified date of completion is deemed to be included in quoted rate of item pertainig to the AC plant which is to be provided by contractor. No extra payment shalll be made on this account.

Comprehensive Maintanance of AC Plant Installed (in Shed No. 24) for a period of 12 Months as Specified (Third Year after Expiry of Defects Liability Period).

Note :- (a) The Contractor/firm will produce the maintence schedule reqd for maintainaning the AC plant from OEM. (b) The maintenance schedule will strictly adhere to the schedule as advised by the OEM. The record for the same will be maintained. (c) The Contractor/firm will maintain all the plants is good working condition without any break down. Contractor in advised to maintain the vigorous maintenence schedule to avoid any breakdown and send the maintence person regularly and also strore the spare parts so that any breakdown is attended promptly . In case the Contractor is failed to maintain the AC in good working condition, Contractor will be liable to pay penalty to the department (Refer penally rates are reflected in PS). (d) The comprehensive maintenance schedule may includes all the spare parts/defective equipment including the consumable which are reqd for regular maintenance of the AC. The contractor will not claim anything extra for these equpt and also to bear all defects arising during the period. (e) Third year comprehensive maintenence shall start immedately after satisfactory completion of expriy of Defect liability period as certified by GE, which is included in the original contractor. (f) Comprehensive maint for Third year after certified date of completion is deemed to be included in quoted rate of item pertainig to the AC plant which is to be provided by contractor. No extra payment shalll be made on this account.

M A Builders

SIBAL AND SIBAL

M/s Shrangi Rishi Construction

Vee kay construction

Meet Road Lines