SCANNED COPY OF DOCUMENTS AS STIPULATED AT PARA 8 (b) (iv) OF APPX A TO NIT

M&L for repairs to pot holes of depth exceeding 30 mm thick, area not exc 1.00 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads , paths etc cutting around edges to at least 25mm in depth, and making good by applying tack coat with paving bitumen grade 10 pack primer (VG-10) @ 5kg per 10 sqm putting in premixed bituminous macadam, well rammed and sealed with binder with paving bitumen grade 30 pack (VG-30) @9.8 kg per 10 sqm blinded with 0.09 Cum of stone chipping, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exc 30 mm, complete all as specified and directed.

M&L for premix bituminous macadam using paving bitumen of grade 30 Pack (VG-30) @ 4% by weight of total mix laid / rolled and compacted to required gradient and camber with 8 to12 tonne power road roller and rolled to a uniform smooth surface (consolidated thickness 75 mm or less), complete all as specified and as directed.

M&L for preparing existing black top road surface by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat with bitumen primer using paving bitumen grade 10 Pack (VG-10) @ 5kg per 10 sqm, complete all as specified and directed.

M&L for bituminous premix semi-dense asphaltic concrete 40mm consolidated thickness with 5.5% binder content of paving bitumen grade 30 pack (VG-30) by weight of total mix, mixed in mechanical hot mix plant and remixed material laid with mechanical paver, rolled and compacted to required camber and gradient with 8 to 12 tonne power roller, complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 100 mm thick plain cement concrete (1:3:6), type C2 (using 40mm graded stone aggregate) as in plinth protection, road side pavings, path/steps, hardstanding finished the concrete surfaces even and smooth without using extra cement, complete all as specified and directed.

M&L for applying thermoplastic road marking paint of approved colour upto 10cm width in edges of road with 2.75 mm or more thickness, applied using mechanically propelled vehicle consisting heated hopper mounted on a pram, which feeds hot molten thermoplastic under gravity to a rectangular screed with a gate at the base whose opening is set to produce the thickness and road marking paint of approved colour confirming to BS 3262-1989, complete all as specified and as directed.

Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions and all as specified and directed.

Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed.