CERTAIN BR REPAIRS TO FLOORING PLASTERING JOINERY SANITATION AND MISC WORKS UNDER AGE BRI OF GE NW NAVY NAGAR, COLABA, MUMBAI

Amount

Taking down cement plaster on brick or stone wall etc of any discription including racking out joints hacking for key scrubbing down with water. Note :- Rate inclusive of scaffolding height upto 15.00 M.

M&L plastering 20mm thick in CM 1:4 on brick or concrete surfaces on walls in two coats, first coat 10mm thick & second coat 10mm thick mixed with water proofing compound finished fair & even complete all as specified. (Note: WPC will be measured & paid separetaly.) Note :- Rate inclusive of scaffolding height upto 15.00 M.

Supply only integral water proofing compound.

M&L rendering 15 mm thick in CM (1:6) on wall finished even and smooth without using extra cement

M&L preparation of new plastered surface of walls and applying two coats of oil bound distemper over a coat of alkali resistance primer all as spefified and as directed.

M&L preparing new plastered surfaces of wall and applying two coats of weather proof acrylic based paint (100% Acrylic) exterior grade over a coat of primer including filling the cracks with Dr.Fixit crack free putty complete all as specified and as directed. Note : - Rates are incussive of provision and removal of steel scaffolding at any height. No extra cost to be paid for steel scaffolding.

Demolition of cement concrete un-reinforced not exc 15 cm thick of any description and at any position and removing the debris outside the MD land.

M & L hard core of broken stone or boulder of guage not exc 63 mm deposited, spread and levelled in layers not exc 15 cm thick watered & rammed to a true surfaces complete all as specified.

M&L 75 mm thick PCC 1:3:6 type C-1 (20mm graded agg) as in sub base flooring and similar works finished even & fair without using extra cement.

M&L coloured glazed cement concrete tiles 300 x 300 x 25 mm thick, machine pressed , glossy finish (reflective type), any design (as approved by GE); set jointed and pointed in neat cement slurry over and including 20 mm thick cement screed in cm 1:6 complete. Note : Cost for 20 mm thick cement screed is inclusive in the rate. No separate payment to be made.

M&L for Machine pressed precast coloured glazed concrete interlocking paver block with grey cement & pigment, glossy finish (reflective type) any shape and size (as approved by GE) confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, as in pavements to required level & gradients, set, jointed with clean dry sand and sealing the ends using PCC 1:2:4 etc complete.

M&L for Sand filling under floors or in foundation including watering and consolidation etc complete.

M&L for 75mm thick PCC (1:3:6 ) type C-1 using 20 mm graded stone aggregate as in plinth protection laid in panels finish the top surfaces even and smooth without using extra cement

Dismantling stone slabs/ tiles/ paver blocks of any description

M&L machine cut pre-polished kota stone slab flooring 20-25mm thick over and including 15 mm thick cement screed base (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. Note : The rate includes the cost of cement screed bed.

M&L machine cut pre-polished kota stone slab in riser of steps, skirting, dado and pillar laid over and including 10 mm thick cement plaster in cm (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. Note : The rate includes the cost of cement plaster.

Rounding to edges of stone slabs (kota/granite etc) one edge, such as in steps, cooking platform, and other similar situations

Extra for forming grooves over granite or kota stone slab as in staircase complete all as specified and as directed

M&L udaipur green/baroda green marble slab 18-20 mm thick over vertical surfaces of wall, columns pillars and lintel soffits etc and similar work machine cut, bedded and jointed with grey cement slurry over and including 10 mm thick screed bed in cement mortar 1:3 and pointed with white cement using marble dust with admixture of pigment to match the shade of marble slab including grinding , polishing and rounding the edges complete. Note : The rates included the cost of cement screed bed 10 mm thick.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L Brick work with sub class 'B' brick straight or curved on plan exc 6 mtr mean radius built in CM 1:6

M&L cement concrete 1:2:4 type B-0 using 12.50 mm gragded aggregate as in coping including necessary formwork complete

M&L cement concrete 1:4:8 type D-2 (40 mm graded aggregate) as in foundations, filling and mass concrete

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

Dismantling wrought iron or mild steel work of any description not otherwise provided for

M&L pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L rolled mild steel as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-290 (Gde E-165)

M&L rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-290 (Gde E-165)

S&F 12 mm dia 100 mm long dash through fasteners bolts fixed in concrete or brick work to hold brackets etc complete

M & L Cutting holes into and walls of cement concrete N exc 150 sq. cm and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required

Preparaing of new steel surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer.

Taking down cast iron soil waste pipe (any size or patterns) moulding all fittings heads, shoes, bends etc. (Measured over all as fixed along the centre line line over fittings and accessories).

S&F 100mm bore sand cast CI soil, vent, and waste pipes in any length with or without ears with cement joints fixed to wall with Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof upto 15 th floor of the building. Note : - The rate includes the cost of scaffolding upto 7th floor of the building. No separate payment to be made in this regard

All as per item No 33.00 above but 75 mm bore sand cast CI soil, vent and waste pipes.

S&F CI bend any radius with oval access door 100mm bore.

S&F CI bend any radius with oval access door 75 mm bore.

S&F CI branch pieces, single (equal or unequal) 100 mm bore with oval access door.

S&F CI branch pieces, single (equal or unequal) 75 mm bore with oval door.

Taking down AC rain water pipes of any size or pattern incl all fittings.

S&F PVC 110mm bore pipes in any length with tubber ring joints fixed to wall with dash through fastners and clamp of 25 x 3mm FL incl all fittings like sockets, bend, junction, elbow etc.

S&F 110mm PVC (SWR) bends.

S & F PVC (SWR) branch piece, Single (single Y) equal or unequal for 100 mm bore.

M&L framed work such as grills, gratings, etc . with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

M&L applying two coats of oil emulsion distemper white or tinted on wall on Old plasterd surfaces of wall after necessary preparation of surface complete all as specified.

M & L providing and injecting chemicals emulsion for post construction anti termite treatment along the external wall below concrete or masonary apron using chemical emulsion at 2.25 litre per linear meter including drilling and plugging holes etc with white cement and match the surface to existing apron complete all as specified and as directed by Engineer-in-Charge.

M&L for treatment of soil under existing floors in junction with wall (internally) using chemical emulsion @ 1 litre per hole at 300mm centre to center and 300mm deep including drilling and plugging 12mm dia holes with cement mortar 1:2 white cement to match the existing floors all as specified and directed by Engineer-in-Charge.

M&L for post construction treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2(1 cement : 2 coarse sand) to match the existing floors all as specified and as directed by Engineer-in-charge

M&L for post construction treatment at points of contact of wood work by chemical emulsion (in oil or kerosene bases solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same

P LAXMI AND CO.

Nilesh Construction

Unitech Enterprises

I.J Enterprises