Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹72.4 LAccepted-AOC B 134 GANESH MURTHI NAGAR PART III COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹86.4 L+₹12.7 L (17.2%)Rejected-Finance FLAT NO A 102 ASHOKVAN RAJSHIV CO OP HSG SOC SHIV VALLABH ROAD DAHISAR EAST MUMBAI 400 068 | MUMBAI SUBURBAN | MAHARASHTRA | 400068 | L2 | Rejected-Finance Other than being lowest | |
| 3 | L3₹87.0 L+₹13.2 L (18.0%)Rejected-Finance FLAT NO 302 BUILDING NO 3 SAI SUNITA APARTMENT PASAVALI KALYAN MUMBAI 421306 | MUMBAI | MUMBAI | MAHARASHTRA | 421306 | L3 | Rejected-Finance Other than being lowest | |
| 4 | L4₹90.5 L+₹16.8 L (22.7%)Rejected-Finance 47 HUSENI LAKDA BAZAAR 242 BELLAIS ROAD MUMBAI 08 | MUMBAI | MUMBAI | MAHARASHTRA | 400008 | L4 | Rejected-Finance Other than being lowest | |
| 5 | Rejected-Technical BLDG NO XI 74 NEAR VALLARAM KULLANGARA TEMPLE KUNHIMANGALAM KOVVAPPURAM PO KANNUR DIST KERALA 670309 | KANNUR | KERALA | 670309 | - | Rejected-Technical Not Meeting eligibility criteria |
Tender Value
₹98 L
EMD Value
₹1.1 L
Closing Date
13 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (NW) Mumbai
Commander Works Engineer NW Dr Homi Bhabha Road Navy Nagar Colaba Mumbai 05
CERTAIN REPAIRS TO ROAD AND ROAD FURNITURE AT OLD NAVY NAGAR AND REPAIR MAINTENANCE TO EXTERANAL WATER SUPPLY AND ALLIED WORKS IN THE NOFRA AREA UNDER GE (NW) NAVY NAGAR, COLABA, MUMBAI
2024_MES_645978_1
8176/CWE (NW) Mumbai/E8
Open Tender
Civil Works
Item Rate
GE (NW) Navy Nagar
Class C
Category a (ii) a(i) old and a (v)
7 documents required · 7 mandatory
₹1,000
GE (NW) Navy Nagar
₹1.1 L
Yes
30 May 2024
11 Mar 2024
15 Apr 2024
11 Mar 2024
13 Apr 2024
1 Apr 2024
11 Mar 2024 - 30 Mar 2024
Amount
Material & Labour for repair to pot holes of any depth , not exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, cutting around edges to at least 25mm in depth, making good by applying a tack coat with bituminous primer VG-30 @10 kg per X Sqm putting in premix bituminous macadum , well rammed and sealed with 9.8 kg of binder VG-30 per 10 sqm blinded with 0.09 cum of stones chipping 6.3 mm size and again well rammed (including supply of premixed macadam binder VG-30 and chippings.) Depth of pot holes exc 30 mm including rolled with 10 to 12 tonne road roller complete all as specified and directed.
Material & Labour for soling (or sub base) 200 mmm thick (spread thickness) in two layers of 100mm sperad thickness and each layers of broken boulders or quarried stones including filling of interstices forming surface rolling and consolidation to rquired gredient and camber with power roller of capacity 8 to 12 tonne complete all as specified and directed. Note: Each layer of 100 mm thick shall be measured separately.
Material & Labour Wet mix macadam 200mm thick (compected thickness ) mixure of graded aggregate ( Granite, trap or basalt) with stone dust and cement @ 2% of total mix, spread,rolling and consolidation to rquired gredient and camber with power roller of capacity 8 to 12 tonne complete all as specified and directed.
Material & Labour for preparing surfaces of WMM surface,brushing with wire and applying a tack coat of 10 kg per 10 sqm with paving bitumen VG-10 complete all as specified and directed.
Material & Labour for premix bitumen macadam with binder content 4% of bitumen (paving bitumen VG -30 grade) by the weight of total mix laid, rolled and compacted to required gradient and camber(consolidated thickness75 mm or less ) with 8 to 10 tonne power roller complete all as specified and directed .
Material & Labour for preparation of black top surface by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with air compressor to remove loose dirt etc,and applying evenly a tack coat @ 5kg per 10 Sqm with paving bitumen VG-30 complete all as specified and as directed.
Material & Labour for bituminous premix semi dense asphaltic concrete 40 mm consolidated thickness with 5.5% binder content of paving bitumen VG-30 by weight of total mix and stone dust using as filler material rolled and compacted with 10 to 12 tonne power roller to required camber and gradient. Note- i) Semi dense bituminous concrete shall be laid using self propelled hydrostatic paver finisher and preparation of mix shall be using hot mix plant and transporting the mix in tipper. ii) The exact bitumen content required shall be determined following the Marshall mix design procedure contained in the Asphalt Institute Manual MS-2 ( Sixth Edition) as referred in case 3.5.3 of IRC 111: 2009, The adjustment in rate on MINUS side variation in quantity of bitumen if any shall be priced at the rate of Rs 60.00 per Kg. No claim whatsoever shall be made for adjustment in plus side.
Material & Labour for preparation of new /old surfaces providing and making lines, dashes , arrows, letters etc on road with hot applied thermoplastic road marking paint min 2.50mm thick complete in all respects such as furnishing all labour, material, tool, Equipment including all incidental cost necessary to carryout the work at site conforming to technical specification clause No.803 of MO RT & H specifications 4th Revision of 2001/Latest edition complete all as specified and directed
Dismantling carefully road stud / solar cat eye from road & refixing of the same on the road after laying of premixed carpet including necessary fixing arrangement complete all as directd by Engineer-In - charge.
Supply & fixing reflector of size 150mm x 150mm x 150mm to give high reflection which enhanaces the visibility of the vehicles during dark and bad light conditions. Reflectrs shall be fixed with base plate in a special mannerto protect the inner surface from dust, water and humidity to enhance life of the reflectors complete all as spefified and directed.
Supply & Fixing in repairs solar stud aluminium alloy & polycarbonate of size 113mm x 90mm x 25mm ,made up of alumainium alloy & polycarbonate self illuminating in dim area during night time including solar chargeable batteries for continual performance, super bright LED with a viewing distance 300-600 metre complete all as specified & directed.
Supply & Fixing in repair 300mm bore Sluice valve (ISI Marked) flanged end, cast iron body, flanged and drilled with non rising type brass spindle and nut long body, class PN 1.6 conforming to IS 14846 of 2000 in any position/location including making all flange joint with rubber or fiber board gaskets, bolts, nuts and washers complete including pumping out accumulated water complete all as specified and directed. Note :- The quoted rate shall deemed to be included for additional manpower, welding, chipping, plastering, pumping out water and any other item required for replacement of the sluice valve including making good the disturbed surfaces and no extra payment will be paid to the contractor for the work.
Supply & Fixing in repair 250mm bore Sluice valve (ISI Marked) flanged end, cast iron body, flanged and drilled with non rising type brass spindle and nut long body, class PN 1.6 conforming to IS 14846 of 2000 in any position/location including making all flange joint with rubber or fiber board gaskets, bolts, nuts and washers complete including pumping out accumulated water complete all as specified and directed. Note :- The quoted rate shall deemed to be included for additional manpower, welding, chipping, plastering, pumping out water and any other item required for replacement of the sluice valve including making good the disturbed surfaces and no extra payment will be paid to the contractor for the work.
Supply & Fix in repair 200mm bore Sluice valve (ISI Marked) flanged end, cast iron body, flanged and drilled with non rising type brass spindle and nut long body, class PN 1.6 conforming to IS 14846 of 2000 in any position/location including making all flange joint with rubber or fiber board gaskets, bolts, nuts and washers complete including pumping out accumulated water complete all as specified and directed. Note :- The quoted rate shall deemed to be included for additional manpower, welding, chipping, plastering, pumping out water and any other item required for replacement of the sluice valve including making good the disturbed surfaces and no extra payment will be paid to the contractor for the work.
Supply & Fixing in repair 150mm bore Sluice valve (ISI Marked) flanged end, cast iron body, flanged and drilled with non rising type brass spindle and nut long body, class PN 1.6 conforming to IS 14846 of 2000 in any position/location including making all flange joint with rubber or fiber board gaskets, bolts, nuts and washers complete including pumping out accumulated water complete all as specified and directed. Note :- The quoted rate shall deemed to be included for additional manpower, welding, chipping, plastering, pumping out water and any other item required for replacement of the sluice valve including making good the disturbed surfaces and no extra payment will be paid to the contractor for the work.
Supply & Fixing in repair 100mm bore Sluice valve (ISI Marked) flanged end, cast iron body, flanged and drilled with non rising type brass spindle and nut long body, class PN 1.6 conforming to IS 14846 of 2000 in any position/location including making all flange joint with rubber or fiber board gaskets, bolts, nuts and washers complete including pumping out accumulated water complete all as specified and directed. Note :- The quoted rate shall deemed to be included for additional manpower, welding, chipping, plastering, pumping out water and any other item required for replacement of the sluice valve including making good the disturbed surfaces and no extra payment will be paid to the contractor for the work.
Material & labour for construction of brick masonary valve chamber of size 1.2 x 1.2 x 1.2 m (internal dimension) (above GL 0.30 mtr) suitable for fixing sluice valves including following specifications complete all as specified and directed by Engineer-in-Charge. i) Demolition of existing valve chamber, excavation and earth work required on sides in any type of soil and removing debries/ soil outside MD land. ii) 150mm thick hardcore of broken stone or boulders of gauge n.exc 63mm, deposited, spread, leveled,watered and rammed to true surface. iii) 150mm thick PCC 1:4:8 type D2 using (40 mm graded stone aggregate) laid on hardcore. iv) 23cm thick brick walls built in cement and sand mortar (1:4). v) 50mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in coping over brick wall including necessary formwork. vi) 15mm thick internal and external plaster including top of floor in cement and sand mortar (1:3) and finished even and smooth without using extra cement. vi) MS angle iron frame made out of 50mm x 50mm x 6mm angle and hold fast made out of MS flat 25mm x 3mm embeded in PCC coping, 5 mm thick MS sheet cover , MS handle, locking arrangement including cutting, welding etcand applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surface.
Material & labour for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth Strip 25mm x 4mm up to 7.5 m length by means of nut, bolts, check nuts and washers of galvanised iron or steel and provision of charcoal dust and common salt packed all around the earth plate including necessary excavation and earth work in soft/loose soil and testing complete all as specified and shown in electrical plate number 3 of MES SSR part- I (1991) and directed by Engineer-in-Charge with following :-. i) Demolition of existing earthing complete including excavation and earth work in soft/loose soil and removing debries/ soil outside MD land. ii) PCC 1:2:4 type B-1 in earthing pit, Precast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than 1.87 Kg/ Sq meter. iii) GI pipe 20 mm bore light grade for watering with Funnel, lugs , GI bolt, nut, check nutsand washar iv) 40 mm bore medium grade GI pipe for protection of earthing lead complete all as specified and directed. v) Alternate layer of common salt and charcoal around earth plate. vi)Testing of earthing.
Supply and laying in repairs 300mm bore spigot and socket Ductile iron water tubing having cement mortar lining on inner surface and one coat of bituminous paint over exposed surface ISI marked, IS No. 8329:2000, including rubber joint of suitable size, class K-9 fixed on wall/roof or laid in floor/trenches with proper alingnment as per site requirement including testing against leakage before filling the trenches complete all as specified and directed.
Supply and laying in repairs 250mm bore spigot and socket Ductile iron water tubing having cement mortar lining on inner surface and one coat of bituminous paint over exposed surface ISI marked, IS No. 8329:2000, including rubber joint of suitable size, class K-9 fixed on wall/roof or laid in floor/trenches with proper alingnment as per site requirement including testing against leakage before filling the trenches complete all as specified and directed.
Supply and laying in repairs 200mm bore spigot and socket Ductile iron water tubing having cement mortar lining on inner surface and one coat of bituminous paint over exposed surface ISI marked, IS No. 8329:2000, including rubber joint of suitable size, class K-9 fixed on wall/roof or laid in floor/trenches with proper alingnment as per site requirement including testing against leakage before filling the trenches complete all as specified and directed.
Supply and laying in repairs 150mm bore spigot and socket Ductile iron water tubing having cement mortar lining on inner surface and one coat of bituminous paint over exposed surface ISI marked, IS No. 8329:2000, including rubber joint of suitable size, class K-9 fixed on wall/roof or laid in floor/trenches with proper alingnment as per site requirement including testing against leakage before filling the trenches complete all as specified and directed.
Supply and laying in repairs 100mm bore spigot and socket Ductile iron water tubing having cement mortar lining on inner surface and one coat of bituminous paint over exposed surface ISI marked, IS No. 8329:2000, including rubber joint of suitable size, class K-9 fixed on wall/roof or laid in floor/trenches with proper alingnment as per site requirement including testing against leakage before filling the trenches complete all as specified and directed.
Material & Labour for run lead joint with pig lead in 300 mm bore CI pipe including pumping out / bail out water and necessary excavation and earth work in any type of soil to carry out repair the joints including Burning out lead joint in position, including removing old lead complete all as specified.
Material & Labour for run lead joint with pig lead in 250 mm bore CI pipe including pumping out / bail out water and necessary excavation and earth work in any type of soil to carry out repair the joints including Burning out lead joint in position, including removing old lead complete all as specified.
Material & Labour for run lead joint with pig lead in 200 mm bore CI pipe including pumping out / bail out water and necessary excavation and earth work in any type of soil to carry out repair the joints including Burning out lead joint in position, including removing old lead complete all as specified.
Material & Labour for run lead joint with pig lead in 150 mm bore CI pipe including pumping out / bail out water and necessary excavation and earth work in any type of soil to carry out repair the joints including Burning out lead joint in position, including removing old lead complete all as specified.
Material & Labour for run lead joint with pig lead in 100 mm bore CI pipe including pumping out / bail out water and necessary excavation and earth work in any type of soil to carry out repair the joints including Burning out lead joint in position, including removing old lead complete all as specified.
Material & Labour for Cutting existing 300mm bore cast iron pipes and reducing for insertion of CI fittings to required length in position for following sizes :- Note :- Pipe fittings used shall be measured and paid under relevant items of schedule 'A' remaining items like welding and other items required shall be deemed to be included in the item rate
Material & Labour for Cutting existing 250mm bore cast iron pipes and reducing for insertion of CI fittings to required length in position for following sizes :- Note :- Pipe fittings used shall be measured and paid under relevant items of schedule 'A' remaining items like welding and other items required shall be deemed to be included in the item rate
Material & Labour for Cutting existing 200mm bore cast iron pipes and reducing for insertion of CI fittings to required length in position for following sizes :- Note :- Pipe fittings used shall be measured and paid under relevant items of schedule 'A' remaining items like welding and other items required shall be deemed to be included in the item rate
Material & Labour for Cutting existing 150mm bore cast iron pipes and reducing for insertion of CI fittings to required length in position for following sizes :- Note :- Pipe fittings used shall be measured and paid under relevant items of schedule 'A' remaining items like welding and other items required shall be deemed to be included in the item rate
Material & Labour for Cutting existing 100mm bore cast iron pipes and reducing for insertion of CI fittings to required length in position for following sizes :- Note :- Pipe fittings used shall be measured and paid under relevant items of schedule 'A' remaining items like welding and other items required shall be deemed to be included in the item rate
Material & Labour for CI specials conforming to IS - 1538, spigot /socket or flanged fitting i.e. bend, tee, collar, flanged/ socket /spigot, tappers and tails pieces etc suitable for 100/150/200/250/300 mm bore pipes complete all as specified. Note-Joints and joining material shall be measured and paid seperately.
Material & Labour for DI specials conforming to IS - 9523, spigot /socket or flanged fitting i.e. bend, tee, collar, flanged/ socket /spigot, tappers and tails pieces etc suitable for 100/150/200/250/300 mm bore pipes complete all as specified. Note-Joints and joining material shall be measured and paid seperately.
Supply Installation, Testing & Commissioning in repairs Motor Actuated Butterfly Valve (ISI Marked) consisiting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 300 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure with following specification :- Input Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq cm. Operating Angle: 90 degrees Disc Material: CI with nylon coating Limit Switches : 02 Nos.For open and close status Mounting :Extended type with universal joint for installation 18 -24 inches above ground level with angle mounting including raising of existing chamber if required.
Supply Installation, Testing & Commissioning in repairs Motor Actuated Butterfly Valve (ISI Marked) consisiting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 200 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure with following specification :- Input Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq cm. Operating Angle: 90 degrees. Disc Material: CI with nylon coating Limit Switches : 02 Nos.For open and close status Mounting : Extended type with universal joint for installation 18 -24 inches above ground level with angle mounting including raising of existing chamber if required.
Supply Installation, Testing & Commissioning in repairs Motor Actuated Butterfly Valve (ISI Marked) consisiting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 150 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure with following specification :- Input Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq cm. Operating Angle: 90 degrees Disc Material: CI with nylon coating Limit Switches : 02 Nos.For open and close status Mounting :Extended type with universal joint for installation 18 -24 inches above ground level with angle mounting including raising of existing chamber if required.
Supply Installation, Testing & Commissioning in repairs Motor Actuated Butterfly Valve (ISI Marked) consisiting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 100 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure with following specification :- Input Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq cm. Operating Angle: 90 degrees Disc Material: CI with nylon coating Limit Switches : 02 Nos.For open and close status Mounting ::Extended type with universal joint for installation 18 -24 inches above ground level with angle mounting including raising of existing chamber if required.
Supply Installation, Testing & Commissioning in repairs Motor Actuated Butterfly Valve (ISI Marked) consisiting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 80 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure with following specification :- Input Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq cm. Operating Angle: 90 degrees Disc Material: CI with nylon coating Limit Switches : 02 Nos.For open and close status Mounting :Direct mounted
Supply and fixing in repair Motor Actuated Ball Valve (ISI Marked) consisiting of Quarter turn single phase Actuator ball valve of size 50 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure with following features :- Input Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq cm. Operating Angle: 90 degrees Disc Material: CI with nylon coating Limit Switches : 02 Nos.For open and close status Mounting :Direct mounted
Supply and fix in repair 6 core 1.5 sqmm PVC insulated, 1100 Volts grade, copper conductor armoured cable complete all as specified.
Supply and fix in repair 4 core 1.5 sqmm PVC insulated, 1100 Volts grade, copper conductor armoured cable complete all as specified.
Supply and fixing CAT 6 UTP cable, armoured, copper conductor for communication with Wimax, high speed including fixing to wall with necessary clamps complete all as specified.
Supply and Fixing in repairs 25mm bore steel water tubing, galvanised, Medium grade with all fittings such as nipple, union, socket, elbow, bends, fixed to wall in shafts up to 15 th floor in high rise buildings in short piece / full length as per site requirement including breaking the existing brick wall for replacement of corroded GI pipe and making good the disturbed surfaces as per existing including necessary formwork and safety arrangement complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs 40mm bore steel water tubing, galvanised, Medium grade with all fittings such as nipple, union, socket, elbow, bends, fixed to wall in shafts up to 15 th floor in high rise buildings in short piece / full length as per site requirement including breaking the existing brick wall for replacement of corroded GI pipe and making good the disturbed surfaces as per existing including necessary formwork and safety arrangement complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs 50mm bore steel water tubing, galvanised, Medium grade with all fittings such as nipple, union, socket, elbow, bends, fixed to wall in shafts up to 15 th floor in high rise buildings in short piece / full length as per site requirement including breaking the existing brick wall for replacement of corroded GI pipe and making good the disturbed surfaces as per existing including necessary formwork and safety arrangement complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs 80mm bore steel water tubing, galvanised, Medium grade with all fittings such as nipple, union, socket, elbow, bends, fixed to wall in shafts up to 15 th floor in high rise buildings in short piece / full length as per site requirement including breaking the existing brick wall for replacement of corroded GI pipe and making good the disturbed surfaces as per existing including necessary formwork and safety arrangement complete all as specified and directed by Engineer-in-charge.
Excavating in trenches n exc 1.5m wide & n exc 1.5m in depth; for foundation,laying pipe etc. or for manholes n.exc.10 Sqm on plan and n.exc.1.5m in depth and getting out in soft/loose soil complete all as specified.
Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cms in soil complete all as specified.
Removing excavated material exc 250 Mtr but n.exc 500 Mtr and depositing where directed complete all as specified.
Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal of debris out of MD land. Note: The place of disposal shall be find out by the contractor.
Material & Labour for PCC 1:2:4, type B-2 (using 40 mm graded crushed stone aggregate) of foundation,hardstanding complete all as specified.
Supply and fixing in repairs 40mm bore gun metal gate valve (ISI Marked) with iron wheel head screwed both ends for iron pipe including fittings i.e. union, socket etc complete all as specified .
Supply and fixing in repairs 50mm bore gun metal gate valve (ISI Marked) with iron wheel head screwed both ends for iron pipe including fittings i.e. union, socket etc complete all as specified .
Supply and fixing in repairs 80mm bore gun metal gate valve (ISI Marked) with iron wheel head screwed both ends for iron pipe including fittings i.e. union, socket etc complete all as specified .
Supply and fixing in repairs 25mm bore gun metal gate valve (ISI Marked) with iron wheel head screwed both ends for iron pipe including fittings i.e. union, socket etc complete all as specified .
Supply & Fixing in repair 20mm bore brass float valves (ISI Marked) high pressure with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed, minimum weight 210 gms each Including necessary PP-R fittings such as elbow,reducer,nipple etc required as per site conditions complete all as speecified.
Supply & Fixing in repair 25mm bore brass float valves (ISI Marked) high pressure with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed, minimum weight 455 gms each Including necessary PP-R fittings such as elbow,reducer,nipple etc required as per site conditions complete all as speecified.
Supply & Fixing in repair 40mm bore brass float valves (ISI Marked) high pressure with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed, minimum weight 690 gms each Including necessary PP-R fittings such as elbow,reducer,nipple etc required as per site conditions complete all as speecified.
Supply & Fixing in repairs 5000 ltr capacity PVC water storage Tank with cover triple layer pure anti microbial round type and dismantling of existing foundation and making new PCC foundation of 10 cm more than the dia of the tank and height of the foundation not less than 20 cm and making all connections including replacement of new GI fittings i.e. tank nipple, washers, float valves and Gate valves and Pipes for connecting the existing delivery lines complete all as specified and directed by Engineer-in- Charge. Note :- Gate valves and GI pipe only shall be paid under relevant item of Schedule 'A' remaining items shall be deemed to be included in the item rate.
Supply & Fixing in repairs 3000 ltr capacity PVC water storage Tank with cover triple layer pure anti microbial round type and dismantling of existing foundation and making new PCC foundation of 10 cm more than the dia of the tank and height of the foundation not less than 20 cm and making all connections including replacement of new GI fittings i.e. tank nipple, washers, float valves and Gate valves and Pipes for connecting the existing delivery lines complete all as specified and directed by Engineer-in- Charge. Note :- Gate valves and GI pipe only shall be paid under relevant item of Schedule 'A' remaining items shall be deemed to be included in the item rate.
BOB ENTERPRISES
ORIENT ELECTRIC CO
Unity Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .