improvement works by providing Chemical treatment for old AC roofing sheet supplying and fixing of BLDC wall mounted fan Colour Washing Electrification works at Project Best section AEE Town Erode Sub division in EEDC Erode

Dismantling the existing damaged Thermacoal false ceiling with the grid arrangements including frames and grills and stacking all the materials carefull as directed by the Engineer in charge including all labour charges, lead, lift, T&Ps etc., complete.

Dismantling the existing window Shutters make necessary repairs to the same, replacing the necessary hinges, handles, etc., and re erection of the window shutter and frames as directed by the Enginner in charge at site including cost of all materials such as Window hinges, Screws, labours, lead, lift, etc., complete.

Dismantling of existing Doors including removal Frames, hinges and fastenings etc., including all labour charges, lead, lift, T&Ps etc., complete.

Earth work excavating and depositing on banks with initial lead of 10m and initial lift of 2m in Hard stiffy clay, hard red earth, shales, muram etc., as directed by the Engineer in charge including all labour charges, lead, lift, T&Ps etc., complete.

Providing P.C.C. 1:4:8 using 40mm HBG metal for foundation and Basement as directed by the Engineer in charge including cost of all materials, labour charges, curing, T&P, lead, lift etc., complete.

Providing P.C.C. 1:3:6 using 20mm HBG metal for foundation and flooring as directed by the Engineer in charge including cost of all materials, labour charges, curing, T&P, lead, lift etc., complete.

Brick work in CM 1:5 using fly ash bricks (230 x 110 x 75mm) for basement and super structure as directed by the Engineer in charge including cost of all materials, scaffolding, labour charges, curing, lead, lift, T&P, etc., complete.

Plastering in CM 1:5, 12mm (P Sand) thick for interior & exterior surfaces of all walls including cost of all materials, scaffolding charges, labour charges, curing, lead, lift, T&P etc., complete.

Providing two legged scaffolding using 15cm diameter blue-gum posts or casuarina posts of best quality bamboo posts of 4m over all length (3m+0.5m projection+0.5m into the ground) the distance between the two rows being 1.25m and the spacing of posts being 2m in both the rows with two horizontal posts with 0.5m overlap on either side and braces at2m c/c including longitudinal and transverse middle braces to step up and providing a platform with country wood planks of 40mm thick and 1m width etc.,in a complete form using coir and nails 1m run.

Providing new AC Sheet Roofing with neceessary UJ bolt, bitumen tar washer by replacing the existing damaged AC sheet to office building including dismantling cost and clearing away with head load upto 100m, stacking for reuse etc., as directed by the Engineer in charge including labour charges, lead, lift, Safety arrangements and equipments and T&P etc., complete.

Supply and apply the chemical treatment to the existing AC sheet roofing including removal of all loose materials, cleaning of "V" grooves along cracks in the asbestos sheets, around J hooks in plaster and side wall followed by filling with polysulphide sealent and cleaning the terrace and applying the entire terrace area for two layers pu Acrylic based water proof coating using Dr. Fixit Roof Seal classic over the heavy duty binding prime coat ( Dr. Fixit prime seal) as directed by the engineers incharge at site including cost of all materials, labour charge, T&P etc as complete.

Supply and installation of PVC POP laminated False Ceiling using ceiling tile of size 595 x 595 x 7.5mm having which is suspended by using 0.3mm thick skelet trelis T15 metal grid system. Skelet trelis T15 metal grid system of 600 x 600mm module includes skelet WA15 W30 wall angle with unequal flanges of 15 / 19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the skelet MT15 W36 MainT with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. Skelet CT15 W12 CrossT with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 600mm centers in the perpendicular direction to the Main T15. Finally, the skelet CT15W06 CrossT with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CT15W12 CrossT in direction parallel to the Main T15 to result in 600 x 600mm module. The POP PVC aluminium coated tile square edge of size 595 x 595 x 7.5mm shall be placed into the grid size of 600 x 600mm. Ensure arrow marks behind the tiles are oriented in one direction to achieve uniform shade appearance as directed by the department offices. The cost includes, cost of material, cost of labour, scaffolding, transportation, conveyance, etc. complying to standard specification.

FRP Door Sutter with FRP Door Frames made out of FRP Sheets of 3mm thick of over all size 65mm x 50mm with rebate suitably reinforced using MS Angle / Flats, cost of holdfasts and Solid Core FRP Shutter Panel of 5mm thick and hollow core frames of 3m wall thickness for styles and rails etc., of sizes specified by Engineers incharge at site including sall material, labour cost, lead, lift, etc., complete.

Supplying and fixing the pinned glass approved quality and colour with teak wood beading frame for existing AC opening Space in the Room as directed by the Engineer in charge including cost of all materials, making holes in masonry/concrete / Wooden, restoring the disturbed area to original condition,lead, lift, etc., complete.

Supplying and fixing of 6u rack with accessories as directed by engineers incharge as including cost of all materials, lead, lift, etc., complete.

Fabricating and supplying of MS Post, MS galvanished coating cable perforated tray with required accessories such as but not limited to MS Angles, Channels, Pipes, flats, Square Bars, etc., as per approved design and as directed by the Engineer in charge including cost of fabrication, transporting, lifting and fixing, making chase in walls, finishing to the original condition, cost of all materials, labour charges, lead, lift, T&P, one coat of red oxide primer, etc., complete.

Wiring with 2 x 1.5 sqmm (22/0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade ceiling for lights, fan and buzzers with heavy metal GI switch box and 6A modular switchs (Legrand or its equivalent ) with continuous earthing for providing 1.5 Sq.mm multistand PVC wire of PVC light point / Fan point, ceiling rose, cable, etc., complete as directed by the Engineer in charge.

Wiring with 2 x 1.5 sqmm (22/0.3) PVC insulated SC unsheathed copper conductor of cable 1100V grade and heavy metal GI switch box for 6A 3 pin modular type non interlocking wall socket with 6A Modular Switch (Legrand or its equivalent) with continuous earthing for providing 1.5 Sq.mm multistrand PVC wire, plug point cable, etc., complete as directed by the Engineer in charge.

Wiring with 2 x 4 sqmm (56/0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade with heavy metal GI switch box with 16A 3 Pin switched socket Modular type non interlocking CS plug (Legrand or its equivalent) with continuous earthing for providing 4 Sq.mm multistand PVC wire for making good of concealed portion with suitable color for concealed PVC plug point including cost of all materials such as cables, pipes, etc., complete as directed by the Engineer in charge.

Supply and fixing of 4Feet LED 20W Fitting with LED 20W tube (HigherEnd) complete with TW round blocks on wall with PVC unsheathed FRLS Copper leads from terminals to the fitting,etc, complete.

Earthing as per PWD standard with an earth electrode of 2M class B GI pipe of dia not less than 32mm complete with neceesary masonry work including cost of all materials, labour, lead, lift, etc., complete. SD - 222 = 2752

Supplying and fixing of suitable PVC Rigid pipe 25mm dia for Lan Cable including labour charges for wiring lan cable, Cost of all materials, labour charges, lead, lift etc (Lan cable will be supplied by Department)

Supply and fixing of 20 Amps DP plug and socket in sheet enclosure with 32 A DP MCB in flush with wall with earth connection (For AC plug) [Legrand (MDS) / Hager (L&T) make or its equivalent] including cost of all materials, labour, lead, lift, etc., complete.

Inner colour washing with two coats using ready mixed emulsion paint or its equivalent of approved quality and colour over a coat of interior water based primer as directed by the engineer at site including thorough scraping and clean and removal old paints, cost of all materials such as Primer, scaffolding, labour, lead, lift etc., complete.

Outer colour washing with two coats using ready mixed exterior emulsion paint or its equivalent of approved quality and colour over a coat of exterior water based primer in as directed by the engineer at site including thorough scraping and clean and removal old paints, cost of all materials such as Primer, scaffolding, labour, lead, lift etc., complete.

Painting the wood work with two coats of approved quality and colour using Ready mixed enamel paint over a coat of wood primer including removing of existing paint and through scrapping, primer, cost of all materials, brushes, lead, lift, etc., complete.

Painting the steel work with two coats of approved quality and colour enamel paint over a coat of primer of Zinc chromate including cost of all materials, brushes, lead, lift, etc., complete.

Supply and fixing of Wall mounted BLDC 400mm fan of approved quality and colour (Higher End) [Phillips/Automberg] on wall complete including cost of all materials, such as cable, pipes, labour, lead, lift, etc., complete.

SGST For bidders within Tamilnadu

CGST For Bidders within Tamilnadu

IGST For Bidders outside of Tamilnadu