Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.8 LAccepted-AOC | L1 | Accepted-AOC Being L1. | |
| 2 | L2₹40.5 L+₹2.6 L (6.94%)Rejected-Finance | L2 | Rejected-Finance Higher bid value. | |
| 3 | L3₹40.7 L+₹2.9 L (7.59%)Rejected-Finance KHAWASNIWAS NEAR POLICE QTRDEORALI GANGTOK SIKKIM | L3 | Rejected-Finance Higher bid value. | |
| 4 | L4₹42.2 L+₹4.4 L (11.6%)Rejected-Finance | L4 | Rejected-Finance Higher bid value. | |
| 5 | L5₹42.7 L+₹4.9 L (12.8%)Rejected-Finance | L5 | Rejected-Finance Higher bid value. |
Tender Value
₹37.5 L
EMD Value
₹74,400
Closing Date
27 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Gangtok
GE Gangtok New Mil Stn Gangtok, Sikkim PIN-737102
SPL REPAIR TO BLDG NO OPT 128 T 219 OF 234 TRANSIT CAMP SPL REPAIR TO BLDG NO T 361 ORs LIVING AT MS 02 OF 106 ENGR REGT AND PROVN OF SHELTER AT HQ 17 MTN ARTY BDE UNDER GE GANGTOK
2023_MES_580054_1
8109/A/E8
Open Tender
Civil Works
Works
182 days
GE Gangtok New Mil Stn Gangtok
As per tender documents
8 documents required · 8 mandatory
₹500
GE Gangtok
₹74,400
Yes
30 Mar 2023
9 Feb 2023
28 Mar 2023
9 Feb 2023
27 Mar 2023
17 Feb 2023
Amount
Dismantling plain or corrugated sheeting, any gauge, thickness all as specified
Dismantling of wall and ceilling boards (fiber pulp insulation etc( or insulation boards.slabs/blankets any thickness including cover fillets all as specified
Dismantling of timber in scantling 40 sqcm and over in section in any position in unframed work all as specified.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area exc 1.5 sqm but n.exc 4.0 sqm all as specified and as directed
Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area n. exc 1.5 sqm as specified and as directed
Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), removing from the Sites and rubbish off the Premises all as directed.
Demolition of birck work or stone/boulder masonary built in cement mortar including all quoins, arches, pillars, precast PCC bond stones including separating serviceable stones/boulders and setting aside for reuse in the work and removal of unserviceable materials from the site complete all as specified and directed.
Supply and fix 0.50mm tihick pre -painted galvalume aluminium zinc coating GI based corrugated steel sheets of any colour having tensile strength of 550 mpa as in roof covering fixed with self tapping screws as in roof complete all as specified and directed by the Engr-in-charge
Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheets of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as in roof complete all as specified and directed.
M&L mild steel rolled section as in main and cross beams, hips and jack rafters, purlin where connected to common rafter and running rails and guides for slidding door fixed with angle cleats etc conforming to Fe 410-W (Gde-250) including painted one shop coat of zinc primer paint (including preparation of surfaces) at contractors workshop before fabrication complete all as specified and directed.
S/F mild steel roof trusses (framed) trussed, purlins, crane gantries, rails, and fasterning and heavy barcket framing (Beam, Tee, angle, channel or flats sections) including distance pieces, cleats etc conforming to Fe 410-W (gde E-250) including painted one shop coat of zinc chromate primer paint (including preparation of surfaces) at contractors workshop before fabrication complete all as specified and directed.
M&L for 12 mm dia mild steel screw bolts (Machine made) with haxagonal or square head at one end and screwed the other, each screwed end to be fitted with washer and one hexagonal or square nut exc 15 cm and n exc 22.5 cm long complete all as specified and directed.
Material and Labour for precast cement concrete solid block masonry Type C1 (1:3:6) using 20 mm graded aggregate as per IS 383 exc 10 cm in width and setting in cement mortar (1:6) complete all as specified and as directed by the Engr-in-Charge.
M&L for rendering 15mm thick in cement mortar (1:4) on fair face of brick or concrete surfaces finished surface even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering 20mm thick in cement mortar (1:6) on fair face of brick or concrete surfaces finished surface even and smooth without using extra cement complete all as specified and as directed.
M&L for preparation of new plaster surfaces and applying priming plastered and other surfaces with alkali resistance pimimg paint and applying two coats of acrylic washable distemper on walls as specifed and directed.
M&L preparation of newly plastered surfaces of walls and applying two coats of weather proof paint over a coat of suitable primer on new surfaces of walls all as specified and directed.
S&F 8/10mm thick PVC ceiling/wall panels of interlocking types, width 250/255 mm with lamination design and exc 60% of PVC content including necessary H-joints, internal/external corner trim, corner cove,F/J edge trims where required fixed with hidden screws to and including steel/wooden frame work of width 75 mm complete all as specified and as directed.
M&L (E-board) Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having phillips head with under head cutter at 200mm centre, including finishing the joints of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid complete all as specified and directed.
M&L Non skid ceramic coloured tiles 7 to 8 mm thick(square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match,over and Incuding15 mm thick screed bed with CM 1:6 complete in floor for receive the tiles complete all as specified and as directed.
M&L as per items No here-in-before but as in skirting over including 10mm thick screed bed with CM 1:4 complete all as specified and as directed.
S&F 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.
S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
M&L preparation of new untreated wooden surfaces of any description width or girth and applying two coats of synthetic enamel paint over one coat of pink primer
Supply & Fix 100mm long butt hinges medium weight cold rolled complete all as specified and as directed.
Supply and fix aluminium alloy anodised sliding door bolts 250 mm long with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed.
S&F Extruded aluminium alloy handles 150mm long, fabricated type, anodised. complete all as specified and directed.
S&F for 150 mm long aluminimum anodised barrel tower bolt, of extruded section complete all as specified and as directed.
S&F Steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
S&F for 4mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each panel complete all as specified and directed.
M&L for hard core of gauge n.exc .63 mm deposited spead, levelled, watered well rammed to a uniform surface n.exc 15 cm thick using broken stone or boulder complete all as specified and as directed.
M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm stone agg) as in plinth protection, path etc finishing surfaces even and smooth without using extra cement including construction joints at every 3 m interval and each coner and provition of mastic filling complete all as specified and directed by the Engr-in-charge.
M&L for PCC 1:3:6 type C-2 (using 40mm stone agg) as in surface channel / drains complete all as specified and as directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred and stopped ends etc complete all as specified and as directed.
S&F vitrios china wash basin white flat back size 630x450 with brackets with coupling and waste pipe complete all as specified and as directed.
S&F Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed by the Engr-in-Charge.
S&F for 15 mm bore pillar taps, standered of PTMT any colour high pressure screwed for iron pipe and fixed minimum weight 110 Grms complete all as specified and as directed.
S&F Soap dish, vitreous China white, approximate size 160x 160x90mm. any type, fixed to plugs with chromium plated brass screw complete all as specified and directed.
M&L for 15 mm bore steel tubing medium grade galvanised with all fittings complete to walls & laid in floors complete all as specified and as directed.
S&F of solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tub fixing in opening as per specification and drawing complete all as specified and as directed.
S&F factory made solid panel PVC door shutter 30mm th (style) consisting of frame made out of MS tubes for top & bootom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rails on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the stiles & rails with suitable PVC sheet beading & joined together with solvent cement suppling & fixing in the frame at site as specification & drawing
S&F Steel ventilator with top hung shutter including hinges , steel peg stay complete all as specified and directed.
S&F 3 mm thick ,figured glass, pin head type and glazing with oil in square n.exc 0.50 sqm in each panel complete all as specified and directed
S&F 1.25 mm mild sheet eaves gutter, Galvanised class 3 half around with rounded edges complete all as specified and directed.
S&F angle (internal or external) or nozzels pieces, drop end (for spigot or socket ends) or nozzel, stop end complete all as specified and directed.
S&F nozzels pieces, drop end (for spigot or socket ends) or nozzel, stop end complete all as specified and directed.
S&F for drop end (for spigot or socket ends) or nozzel stop end complete all as specified and directed
S&F aluminium anodised alloy curtains rod with fixing brackets, stops roller etc complete all as specified and directed.
Taking down cement plaster of any description on brick or stone walls incl raking joint hacking for key ,scrubbing down with water etc all as directed.
Demolition cement concrete (Un reinforcement) concrete in ground floor and paving n exc 15 cm thickness (below and above of ground level) all as directed
Taking up or down steel tubing and connection including cleaning for re-fixing or removing from site and S&F of 50mm bore GI pipe with all fittings fixed complete to wall, ceiling or laid in floor.
Demolition of reinforced cement concrete in any description and in any position (reinforcement cut as required to facilitate demolition)
Dismanting wrought iron or mild steel work of any description not otherwise provided for grils, rails etc
Demolition of concrete of description and in any position not otherwise specifically provided for (unreinf)
M&L for factory made chequered cement conc. Tiles 200mm x200mm x 25 mm/ 300 X300 X 25 mm thick set jointed and pointed in neat slurry in floors and steps with grey cement and pigments over and incl 15 mm thick screed bed or bedding layer of CM 1:6 complete all as specified and directed .
All as per item No 56 above but except tiles
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc.
M&L for rendering 15mm thick on fair face of brick or concrete surfaces in cement mortar (1:6) finished even and fair complete all as specified and directed.
M&L for 20 mm thick rendering in two layers 10 mm each in cement mortar (1:4) with using water proofing compound in external layer as per manufacturer instructions on fair faces of brick / concrete surfaces Note water proofing compound measured sepreatly
Supply only liquid integral water proofing compound
Excavation in trenches n.exc 1.5 m in depth and 1.5 m in width for foundation etc and getting out in soft / loose soil all as directed.
Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cms in thick as in soft/loose soils complete all as specified and directed.
Removing excavated surplus (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m the starting point complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregare) as in foundation filling & mass concrete comlete all as specified and directed.
M&L for stone walling of random rubble, uncoursed, well bonded and solidly hearted, built in cement mortar (1:6) including brought up to courses complete all as specified & as directed.
M&L RCC M25 (design mix) using 20mm graded stone aggregate as in foundations, including rafts, footings, foundations beams, plinth beams, bases for columns etc basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.
M & L for Mild steel TMT bars 10mm dia and over cut to length bent to shape required incl, cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips conforming to IS:1786 complete all as specified and as directed
M&L for Mild steel TMT bars 6 to 8 mm dia cut to length and bent to shape required including cranking, hooking ends and binding with and MS wire not less than 0.9 mm dia or securing with clips complete all as specified and as directed
M&L for providing Machine cut kota stone slab,flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15mm thick screed bed complete all as specified and directed.
All as per item No 71 but in narrow width of vertical sufaces.
Materials and labour for glazed ceramic tiles coloured of size 300 x 200 mm x 7 mm thick fixed on vertical surfaces such as dado etc conforming to IS - 13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of screed bed 10mm thick in cement mortar 1:4 complete all as specified and directed.
M&L for steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete
S & F 35mm thick factory made second class hard wood, kiln seasoned and chemically pressure treated plain framed, paneled shutter (two panel) with lock rail and panel of 9mm thicl BWP commercial ply or 12mm veneered particle board with commercial face veneers on both faces or 10mm bison panel complete all as specified and as directed.
S&F in repairs 5.5mm thick tinted sheet glass, ordinary quality and glazing withoil putty in square in exc 0.5 Sqm in each pane completed.
S&F floor door stopper with overall length of cover plate 150mm of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and directed.
M&L RCC (Nominal mix) type B1, 1:2:4 using 20mm graded stone aggregate as in slabs supported on wall and columns in floors, deck slabs, shelves and the like complete all as specified and as directed.
M&L for use and waste of formwork to soffits of suspended slab such as roof slabs, floor slabs, landing and similar works exceeding 200mm thick for flat fair finished surfaces of concrete complete all as specified and as directed.
M&L for preparation of new/old plastered surfaces of walls and applying two coats of oil bound distempery, over a coat of chalk whiting primer & over a coat birla wall care putty complete all as specified and directed.
M&L for applying three coat of white washing including preparation of new or previously untreated surface of ceiling complete all as specified and directed.
M&L for two coats of synthetic enamel painting to new steel surface over a coat of red oxide primer including preparation of surfaces area exc 10cm width & girth complete all as specified and directed.
M&L for providing cement concrete type B-0 (1:2:4) (using 12.5mm size graded aggregate) in coping set incl weathering, slightly rounded or chamfered angles & thickness.
All as per item No 9 here-in-before but except sheeting
S&F for anodised aluminium snap grid frame work for false ceiling confirming IS:733, 737 & IS:1285 all as specified and as directed.
Material and labour 6 mm thick plywood, 5 ply grade BWR type BB fixed with nails to timber frame work in wall complete all as specified and as directed.
Material and labour for 2nd class hard wood fillets, square, rectangular and triangular in section, wrought, secured with nails, sectional area exe 3 Sqcm but n.exc 6 Sqcm in section complete all as specified and as directed.
S&F for PVC (SWR) (Bore of pipe 110mm) pipes single socketed, in any length with rubber ring joints fixed to walls with necessary clamps, bolts etc complete all as directed by Engr-in-Charge.
S&F for PVC (SWR) bends any radius fixed to PVC pipes/steel gutters etc complete all as directed by Engr-in-Charge (Bore of pipe 110mm)
S&F sink with drainage board made of stainless steel 1.00mm thick for kitchen with plugs, washers and waste pipe, wasters, including cantilever CI brackets connecting union 40mm CP waste fitting and PVC waste pipe with CP PTMT fly nuts of required length pipes etc complete (Overall size 915mm x 460mm with bowl size 410mm x330mm x 160mm) Make Nirali, Suprime or as approved by GE.
S&F of PVC connections 15mm size with PTMT nuts of length 600mm
Supply and fixed in repairs 15mm bore pillar taps, fancy type with long neck with aerator cast copper alloy with capstan head, chromium plated, screwed down, high pressure with long screwed shanks, fly-nuts, with screwed for GI pipe complete all as specified and as directed.
S&F in repaired aluminium power coated fancy curtain rails plain or colour 20 to 25mm dia as approved with teak wood finishing brackets and knobs complete all as specified.
M&L for 20mm thick granite (of any type) tiles machine cut in skirting/dado laid over cement screed bed 15mm thick in CM (1:6) and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of grainite stone including cutting and polishing of type
S&F in repairs bib taps 15mm bore fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
Supply & fix in 15 mm bore dia stop cocks, cast copper, fancy type, chromium plated, reduce body long shank, cap (concealed type) screwed down high pressure screwed both ends for iron pipe or union etc as in repair complete all as directed.
Material and labour for preparation of old painted surfaces of wood & wood based materials over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as directed by the Engr-in-Charge.
M&L 2nd class hard wood in scantling fixed in clean sawn complete all as specified and as directed.
All as per item No 98 above but except timber scantling
Taking down rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends swan-necks etc including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) completed.
S&F PVC (SWR) half round 150mm dia with rounded edges incl all accessories like bend T etc for eaves gutter complete all as specified and directed.
Surface excavation not exc (not exceeding) 30 cm deep and avg 15 cm deep and getting out in soft/loose soil
Rough excavation in soft and loose soil not exc. 1.5 metre in depth and getting out complete all as specified and as directed by the Engr-in-Charge.
M&L RCC (nominal mix) type B1, 1:2:4 using 20mm graded stone aggregate as in beams cantilevers, lintel over 1.5m span complete all as specified and as directed.
M&L RCC (Nominal mix) type B-0 1:2:4 using 20mm graded stone aggr as in columns, pillars, piers, posts and struts complete all as specified and as directed.
Formwork to side of concrete column post struts piers and side & soffits (if any) & similar work vertical to batter, rough finished surface of concrete flat complete all as specified and as directed.
Supply and fix MS flat iron as in bands, straps, supports or stays for hold fasts clamps for eaves board/facia etc conforming to Fe-290 Gde-E-165 complete all as specified and as directed.
All as per item No 69 here-in-before but 5mm dia and over upto and including 10mm dia as in stirup Spacer and binders.
Material and labour for 75mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in sub-base of floor over and including 50 micron polythene film laid complete all as specified and as directed by the Engr-in-Charge.
Providing 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded aggregates) concrete surfaces in floors complete all as specified and directed.
M&L for 75mm thick sand filling under floors inclduing watering and consolidation complete all as specified and directed by the Engr-in-Charge.
M&L for applying two or more coats of 100% premium acrylic emulision paint having VOIC less than 50gm/liter and UV resistence as per IS 15489:2004, alkali and fungal resistance, dirt resistence exterior paint of required shade (Company depot tinted) with silcon additives @ 1.43 liter/10Sqm over new surfaces etc all as specified.
Formwork to sides and soffit of beams, lintels, shelves of slabs/beams and similar works including supports, over hangs etc rough finished surface of concrete flat complete all as specified and directed.
Material and labour for rendering 15mm thick on block concrete masonary walls in CM 1:6 finished even and smooth without using extra cement complete all as specified.
S&F Hasp and staple aluminium anodised 100mm long including bolt to hinge plate and fixed with screws all as specified and as directed.
Material and labour for walling of random, uncoursed well bonded, bedded and solidly hearted, built in cement mortar 1:4 including brought upto course complete all as specified and as directed by the Engr-in-Charge.
Taking down carefully the old unserviceable Copper/Aluminium Point Wiring (Light, Fan, Socket or Power) complete including fixtures and fittings such as switches, ceiling rose pendants, regulators, sockets, light fittings etc and removing materials for taking credit and making good disturbed surfaces of wall floor etc all as specified and as directed
Taking down carefully by unscrewing from boards/outlet boxes DB's fittings and fixture such as switches, ceiling roses, lamp holders, brackets, ceilling fittings, bulk head fittings tube light fittings and regulators etc complete all as specified and as directed.
Taking down carefully by unscrewing from boards/outlet boxes, DBs, main switch etc complete all as specified and as directed.
Taking down MCB of any type or rating and keeping aside complete all as specified and as directed.
M&L for point wiring with 1.5 Sqmm (nominal cross-sectional area) PVC (FRLS) insulated unsheathed single core copper cable working voltage 1100 volts grade conforming to IS-694 with multistranded copper conductor in including PVC heavy grade 25mm PVC casing caping (double Lock) including PVC polycarbonate/PVC/recatangular block/box of suitable size covered with 3mm thick bakolite sheet fixed by means of brass machine screw and cap washer including size 1.5 sqmm (nomnal cross sectionl area PVC (FRLS) insulated unsheathed single core multistranded copper conductor cable as earth continuity conductor connected to main switches/DBs or common earth dolly for light/fan point controlled by one switch, one way 5/6 AMP one way complete all as specified and directed for the following .
All as per item No. 121 here-in-above but with 1.5 Sqmm copper conductor with 1.5 Sqmm stranded earth wire for 5 Amps switch socket point 5/6 AMP onin independent board.
All as per item No. 121 here-in-above but with 2.5 Sqmm copper conductor with 2.5 Sqmm earth stranded wire for 16 Amps power point in independent board.
S&F LED lights fitting 1x 18W, 220V, ,4 feet long,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed (Make : Havells Cat No LUMILINE+BS18WLED830SPCSS or equivalent of approved make)
S&F in repairs lamp holder angular/straight insulated body, with back plate suitable for batten fittings, white/ivory finish complete all as directed. Make : Anchor Product Code No 39527 or equivalent of approved make
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V of size 250mm sweep with, blades and frame and louvers complete all as specified and as directed.
S&F only of water proof 10watt LED bulk head 1x 10W bulkhead luminaries including LED light driver holder connecting up with three core flexiable copper conductor cable of suitable size complete all as specified and as directed by Engr-in-Charge.
S&F in repair switch piano, flush type 6 amps 230 Volts single pole One way 5 Amp (ISI marked) complete all as specified and as directed by Engr-in-Charge.
S&F switch socket combination, 2 and 3 pin, 5/6 amps, multipurpose, flush, non shutter, non inter locking type, 230 volt flush type, white/ivory finish with two fixing hole including suitable gang box complete all as directed including taking down old one. Make : Anchor or equivalent of approved make
S&F switch socket combination 2 in 1, 6 pin, 5/6 Amps and 15/16 Amps, multipurpose , flush, non shutter, non inter locking type, 230 volt flush type, white/ivory finish with two fixing hole including suitable gang box complete complete all as directed including taking down old one.
S&F ceiling rose, PVC/polycarbonate insulated body, 3 terminal and 240 volts, ISI marked complete all as specified and directed
S&F sheet metal enclosure DB's 240 Volts, IP-43, suitable for mounting MCB's, SPN, 8 way with 200 Amps rated copper bus bar double door type complete and including taking down old DB with MCB complete all as specified and as directed.vells/ABB/Legrand)
S&F in repairs MCB single pole 6 to 32 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as directed by Engineer-in-charge.
S&F in repairs MCB single pole & neutral 40 to 63 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as directed by Engineer-in-charge.
Supply, Laying, jointing & testing 1100 volts grade, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured LT electric power under ground cables conforming to IS 7098(Part-I)-1988, heavy duty with aluminium stranded conductor laid in trenches or passing through pipe of cross sectional area 16 sqmm 2 core with all fixing & connecting accessories complete all as specified & as directed.
Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connected with galvanised iron/steel earth wire of 4mm dia by means of bolts, nuts, check nuts and washers made outof galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part-I and earth wire protected by galvanized pipe light grade 15mm bore and connected to VTPN DB/SPN DB including neccessary earthwork and excavation in any type of soil, GI light grade 20mm bore watering pipe with funnel and wire mesh, PCC 1:2:4 type B1 chamber with 40mm thick RCC 1:2;4 type B1 design mix cover slab with 6mm dia MS bars at 100mm c/c both ways with MS hook 6mm dia MS bars etc complete all as specified and as directed including testing on completion.
Supply, install, testing & commissioning of electric water heater in repairs, storage vertical type, 5 star rated, 25 ltr capacity comprising of high wattage heating element for instant heating, extra thick inner tank of superior grade, rust & shock proof outer body, non-ferrous pressure plate with & incl provn of 04 Nos grouting bolts suitably flushed to wall or any other surface incl Hot & cold water pipe for geyser inlet and outlet connection & electric connection with 3 core PVC insulated sheathed, standed copper conductor cable/flexible chord complete all as specified and as directed. Make : Havells Cat No- GHWAMGSWH050 or equivalent in Crompton/ Bajaj
Supply & fixing rotaitonal moulded polythene water storage tank 1000 ltrs capacity, ISI marked multi multilayer constraction (cylindrical vertical with closed top) hoisted & fixed in position including supply and fixing of 25mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe of having weigth not less than 455 gms including connection complete all as specified and as directed.
M & L for 25mm dia steel tubing medium grade galvanised with all fitting fixed complete to walls and ceilling or floor complete all as specified and as directed.
Supply and fix CP mixer for hot and cold water mixing, ISI marked with iron wheel head screwed both ends for GI pipe complete all as specified and as directed by Engr-in-Charge.
Supply & fix 15mm bore gun metal valves, ISI marked with iron wheel head screwed both ends for GI pipe complete all as specified and directed.
Supply & fix 25mm bore gun metal valves, ISI marked with iron wheel head screwed both ends for GI pipe complete all as specified and directed.
M&L for 15 mm bore steel tubing medium grade galvanised with all fittinged to walls & laid in floors complete all as specified and directed.
Supply and fix stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15 mm, complete all as specified and directed
Supply and fix connections 15mm size with PTMT nuts of length 750mm complete all as directed by the Engr-in-Charge.
Screwing 25mm bore in existing for alteration or additions (lenghthening screw on pipe from connection)
All as per item No 121 here-in-before but for one socket outlet of 15 AMPs fixed on independent board with 4 Sqmm multistranded copper conductor wire FRLS PVC insulated and 4 Sqmm copper conductor wire FRLS PVC insulated using as earth wire complete.
Supply and laying DWC pipe SN-4 with coupler 40mm OD, ISI marked along with all accessories like socket, bend, couplers etc conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. laid in trenches/fixed to pole/laying under road crossing/fixed on pavement walls with clamps complete all as specified and as directed.
Excavation in trenches n.exc 1.5 m in depth and 1.5 m in depth for laying of cable/foundation of pole and getting out in loose/hard/rocky soil complete all as directed.
Returning filling in loose/hard/rocky soil including spreading levelling watering and well ramming in layers not exceeding 25 cms in thick as in soft/loose soils complete all as specified and directed.
Removing excavated surplus (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m the starting point complete all as specified and directed.
KAMLESH ENTERPRISE
M/S S. S CHETTRI AND SONS
M/S ANIL KUMAR THAKUR
DHARMINDER SINGH
RAAJ BANGAR
KARMA TSETEN BHUTIA
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .