Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
12 May 2022, 4:00 pmClosed
Executive Engineer
IRRIGATION AND FLOOD CONTROL DIVISION SRINAGAR
Annual Maintenance, Repairs, and other emergent works of Irrigation and Flood Control Sub-division Sonwar for the year 2022-23 (Stage Tender)
2022_IFC_168529_1
ENIT NO 5 OF 2022-23
Open Tender
Civil Works
Item Rate
320 days
srinagar
Please refer Tender documents.
3 documents required · 3 mandatory
₹3,500
Yes
Executive Engineer
₹70,000
Yes
14 May 2022
6 May 2022
13 May 2022
6 May 2022
12 May 2022
6 May 2022
Amount
Earth work in rough excavation, banking excavated earth in layers not exceeding20 cm in depth, breaking clods, watering, rolling each layer with 1/2 tonne roller or wooden or steel rammers, and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and lift upto 1.5 m in all kinds of soil
Banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with 1/2 tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m in All kinds of soil:
Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil.
Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead up to 50 meters and lift up to 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :
Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead up to 50 meters and lift up to 1.5 m, as directed by Engineer-in-Charge. Oridinary rock
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed (All kinds of soil)
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed Ordinary rock 1 meter from cutting edge
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material : All kinds of soil
Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material : Ordinary or hard work
Removal of unhygenic materials, so classified by the site Engineer, from designated sites and its disposal as per directions, all invlusive
Pumping out water caused by springs, tidal or river seepage broken water mains or drains and the like
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
Providing and laying damp proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
Providing and laying damp proof course 50 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
Providing and laying in position specified grade of reinforced cement concrete including curring but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1:5:3 (1 Cement : 1.5 Coarse Sand: 3 graded stone aggregrate 20 mm nominal size)
Providing and laying in position specified grade of reinforced cement concrete including curring but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to five level including curing but excluding the cost of centering, shuttering, finishing and reinforcement with1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
Centering & shuttering incl. strutting, propping etc. & removal of form work for:-Foundations, footings bases of columns for mass conc.
Walls ( Any thickness) including attached pilasters, buttresses, plinth and string courses filters, curbs & steps etc.
Suspended floors, roofs, landings balconies and platforms.
Shelves (cast-in-situ)
Lintel, beams, plinth beams, girders, bressumers and cantilevers.
Columns, pillars, piers, abutments, posts and struts
Edges of slabs and breaks in floors and walls Under 20 cm wide
Edges of slabs and breaks in floors and walls Above 20 cm wide
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inl are in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of rade Fe-500D or more
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand)
Cement mortar 1:6 ( 1 cement : 6 coarse sand)
Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) ( Including cost of stones) Quarry
Nallah
Dru random rubble masonary with hard stone in foundation and plinth with Nond Stone. Quarry
Nallah
Without bond stone Nallah
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or withdash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First Class Kail wood
Second Class Kail Wood
Kiln-Dried Wood
Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : First Class Kail wood 35 mm
Second class kail wood 35 mm
Kiln-dierd wood/silver wood 35 mm
Providing and fixing M.S Grills of required pattern in frames of windows etc with M.S flats, square or round bars etc including priming coat with approved steel primer all complete: Fixed to steel windows by welding
Fixed to openings/wooden framers with rawl plugs screws etc.
Providing wood work in frames of false ceiling particulars etc sawn and fixed in position Budloo/Fir wood
Popular Wood
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete
Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete Riveted and bolted
Welded
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete..
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 4.0mm thick glass panes:
5.00 mm thick glass panes
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 25mm thick with 12.5 mm nominal size stone aggregate25mm thick with 12.5 mm nominal size stone aggregate
40 mm thick with 20 mm nominal size stone aggregrate
50 mm thich with 20 mm nominal size stone aggregrate
Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats ofapproved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required0.63 mm thick with zinc coating not less than 275 gram/m2
0.50 mm thick with zinc coating not less than 275 gram/m2
Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete0.63 mm thick with zinc coating not less than 275 gram/m2
0.50 mm thick with zinc coating not less than 275 gram/m2
Providing and fixing 20mm thick wooden planks ceiling (frame work for base to be paid for separately) with M.S. screws ist class kail wood
2nd class kail wood
Popular Wood
Kiln/fried wood/ silver wood
Budloo/fir wood
Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete Second class kail wood
First class Budloo/Fir wood
Popular Wood
12 mm Cement Plaster of Mix 1:4 )1 Cement : 4 find sand
1:6 (1 Cement : 6 fine sand)
15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand)
1:6 (1 Cement : 6 fine sand)
Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
Applying priming coat with ready mixed red oxide Zinc Chromate Primer of approved brand and manufacure on steel work (second coat)
Painting with synthetic enamel paint of approved brand and manufactureto give an even shade. Two or more coats on new work
Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)
1:4:8 or leaner mix (i/c equivalent design mix)
Demolishng RCC work manually/by mechnical means including stacking of steel bars and disposal of unservicable material within 50 meters lead as per directions of Engineer in charge
Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar
Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar
Removing mortar from bricks and cleaning bricks including stacking withn a lead of 50 m (stacks of cleaned bricks shall be measued : from brick work in cement mortar 1000/No
Dismentling old plaster or Skirting raking out joints and cleaning the surface for plaster incl. disposal of rubbish to the dumping ground within 50 mtr. lead.
Dismantling old protection work including cutting of crates and stacking of stones
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement: 2 fine sand) including testing of joints etc. complete100 mm dia r.C.C pipe 150 mm dia RCC pipe
250 mm dia RCC pipe
300 mm dia RCC pipe
450 mm dia RCC pipe
600 mm dia RCC Pipe
900 mm dia RCC pipe
1000 mm dia RCC pipe
Constructing Muthu Bunds comprising boulders wood bushes in alternate layers: including washing in water situations
Dry stone pitching (any thickness) excluding cost of stones On Horizontal
On top copings of banks
On Slopes
Hand packing stones in wire crates excluding cost of crates and stones
Extra for every additional lift of 1.5 m or part there of beyond 1.5 m height for hand-packing of stones in wire-crates
Dumping stone excluding cost of stones in Horizontal on level
On slopes (behind pitching)
Grouting of stone pitching using M-10 nominal mix concrete (max. size of aggregates; 20mm nominal) @ 3.65 cum per 100 sq m on horizontal/side slopes; complete including curing.
Grouting of stone pitching using M-10 nominal mix concrete (max. size of aggregates; 20mm nominal) @ 6.00 cum per 100 sq m on horizontal/side slopes; complete including curing.
Opening out old wire crates those and re-binding after filling
Stone Boulders (Nallah) Nominal size 225 mm (stack measurements reduced by 15 %)
Stone Boulders (Quarry) Nominal size 225 mm (stack measurements reduced by 15 %)
Supply of stone soiling
Supply of stones
Filling empty cement bags with sand/ earth; including cost of sewing and, strings; excluding cost of bags and earth / sand.
Unloading sand earth fille bags from boat Placing in dry
Placing in water
Silt Clearance from canals Insclusive of intitial led and lift (50 m and 1.5 m) Dry
Silt Clearance from canals Insclusive of intitial led and lift (50 m and 1.5 m) Wet
Shingle Clearance from canals
Weed clearance from Lakes (using boats)
From canal (including extraction of roots)
Slip Clearance : In ordinary soils disposal lead upto 50 m and lift upto 1.5 m
In soils: mixed with moorum/kankar/shingle/boulders, disposal lead upto 50 m and lift upto 1.5 m
In soils mixed Decomposed Rocks by blasting any other means
Engagement of Labour
Mason (For brick work ) Ist class
Mason (for Plaster of pairs work) Ist class
Fitter (Grade I)
Carpanter Ist Class
Blacksmith Ist Class
Mason (for ornamental stone work) Ist Class
Driver for road roller, concerete mixer, truck etc
Mistry/ operator Pile/Special machiners
Technicaan
Mason for brick work 2nd class
Mason for plain stone work 2nd class
Glazier
Assistant fitter or 2nd class fitter
Carpanter 2nd Class
Black smith 2nd Class
Painter
Nozzle man/ Gun Man
Boat man
Boat (Capacity upto 20 cum)
Hire charges of pumpset of capacity 4000 liters/hour
Surface Vibrator
Hire Charges of Concrete Mixer 0.25 to 0.40 cum with hoopper
Cutting saw machine (wood cutter) incl POL
Supplying and stacking of Good Earth at site including royality, earth measured in stacks will e reduced by 20% for payment
Supply of stone dust
Engagment of GCB including POL with driver complete
Engagement of Poclain including POL with driver complete
Vibrator
Engagement of sumo for inspection / movement of officiuals within jurisdiction including driver and (pol) if and when needed
Engagement of load carrier for carriage of material within jurisdiction including driver and (pol) if and when needed
Engagement of load carrier for carriage of material within jurisdiction including driver and (pol) if and when needed (outside)
Disassembling and resembelling of chain saw wood cutter after necessary repairs including all accessories required for repair work with all sorts carriages complete
Dismantling , Realigment and assembling of single winch iron gate
Repairs to shutter b y way of removing dents , kinks and settling of iron gate
Lubricanting, greasing after cleaning the machine (complete job )
Providing / replacing still/groove MS steel channel of ISMC 150 x 75 mm
Repairs to side channels by way of removal of bends and kinks including setting and fixing complete
Providing and fixing pipe sleeves ( Rainm water pipes ) including priming coat and two coats of metallic
Providing and fixing of grease lids for winch machines
Providing and fixing of coupling of required sizes
Providing and fixing of rubber seal for shutters
Diassembeling and reassembling of water control gate for maintaining necessary repairs including supply and providing / fixing of necessary accessories req. at site with all sorts of carriage complete in all respects to entire satisfaction of engineer in charge . Double winch machine
Single Winch machine
Worm rods
Nuts bolds
Electric welding
operating handles
Rubber seal of standard quality
Close timbering in trenches including strutting, shoring and packing cavities (wherever required) Measurements to be taken of the face area timbered).Depth exceeding 1.5 m but not exceeding 3 m.
Open timbering in trenches including strutting and shoring complete measuremet to be taken of the face area timbered : Depth not exceeding 1.5 m
Deepth exceeding 1.5m but not exceeding 3m
Deepth exceeding 3 m but not exceeding 4.50 m
Clearance of grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared (100/sqm)
Excavating, supplying and filling of local earth including royality by mechnanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundations etc complete.
Hire charges of crane upto 80 tonne capacity/day for opening and closing of navigation channel gates.
Excavation in dumped stones or mulba including stacking of serviceable and unserviceable material separately and disposal of unserviceable material lead upto 50 m and lift upto 1.5 m, disposed material to be neatly dressed.
Finishing with Delux multi surface paint system for interior and exteriors using primer as per manufactures specifications13.57.1 Two or more coats applied @1.25 liter/10sqm over and including one coat of speical primer applied @0.75liter/10sqm
13.57.2 painting wood work with delux multi surface paint of required shade. Two or more coats applied @0.90 liter/10sqm over an under coat of primer applied @0.75liter/10sqm of approved brand and manufacture
13.57.3 Painting steel work with delux multi surface paint of required shade to give an even shade. Two or more coats applied @0.90 liter/10sqm over an under coat of primer applied @0.80/10sqm of approved brand and manufacure
Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work
Painting with synthetic enamel paint of approved brand and manufactureto give an even shade. 13.70.1 Two or more coats on new work
13.70.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacure
Providing and fixing Ist Quality ceramic glazed wall tiles conforming to IS 15622 (thickness to be specified by the manufacturer) of approved make in all colours , shades except burgundy, bottle green, black of any size as approved by Engineer In Charge, in Skirting, risers of steps and deadoes over 12 mm thick bed of cement mortor 1:3 (1 cement :3 coarse sand) and jointing with grey cement slury @ 3.3 kg /sqm incl. pointing in white cement mixed with pigment of matching shade complete.
Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 oarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with igment of matching shade complete.
Providing and laying virtified tiles in different sizes thickness to be speicified by manufacturer with water absorportion less than 0.80% and conforming to IS 15622 of approved make in all colours and shades in skirting, riser of steps over 12 mm thick bed of cement mortar 1.3 (1 Cement. 3 Coarse Sand) including routing the joint with white ceemnt and matching pigments etc complete. 11.56.1 sixe of tile 500x 500 mm
11.56.2 sixe of tile 600x 600 mm
11.56.3 size of tile 800x 800 mm
11.56.4 size of tile 100x100 mm
Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) . Light shade using white cement
Medium shade using 50% white cement and 50 % ordinary cement
Dark shade using ordinary cement
Ordinary cement without any pigment
Providing and fixing to the inlet mouth of rain water pipe PTMT (an engineering thermoplastic) grating square silt) 150 mm square with a height of 8 mm and weighing not less than 10 gmas.
Providing and fixing GP Pipe complete with GI fittings excluding trenching and refilling etc (external work) 15 mm dia nominal bore Liight
15 mm dia nominal bore Medium
20 mm dia mominal bore light
20 mm dia nominal bore Medium
25 mm dia nominal bore Light
25 mm dia nominal bore Medium
32 mm dia nominal bore light
32 mm dia nominalbore medium
40 mm dia nominal bore light
40 mm dia nominal bore medium
50 mm dia nominal bore light
50 mm dia nominal bore medium
65 mm dia nominal bore light
65 mm dia nominal bore medium
80 mm dia nominal bore light
80 mm dia nominal bore medium
100 mm dia nominal bore light
100 mm dia nominal bore medium
150 mm dia nominal bore light
100 mm dia nominal bore medium
providing and fixing brass stop cock of approved quality: 15 mm dia nominal bore
20 mm dia nominal bore
Loading/unloading sand/earth fille bags in lorries, lead upto 50 m
Loading sand /earth filled bags in boats, lead upto 50 m
Pointing on stone work Pointing on stone work with cement mortar 1:3 (1 Cement: 3 fine Sand) Flush/rules pointing.
Raised/and cut pointing
Supplying and stacking of Good Earth at site including royality, earth measured in stacks will e reduced by 20% for payment
Supplying and stacking sludge at site including royality sludge measured in stakes will be reduced by 8% for payment
Fine dressing of the ground
Spreading of sludge, dump manure or/and good earth in required thickness as per directions of officer incharge (cost of sludge, dump manure or and good earth to be paid separetaly
Mixing earth and sludge or manure in proportion specified or directed by officer in charge.
providing and fixing stainless steel pipe and fitting of grade AISI 304 as per JIS standard 3448 completed with press tupe fitting (fitting shal be paid for separetaly) including fixing of the pipe wth clamps at 1.00 m spacing including cutting and making good the walls including testing of joints complete as per direction of Engineer in charge The pipe length inserted in the fitting shal not be measured for payment Internal work Exposed on wall 19.76.1 15.88 mm outer dia pipe
19.76.2 22.22 mm outer dia pipe
19.76.3 28.58 mm outer dia pipe
19.76.4 34.00 mm outer dia pipe
19.76.5 42.70 mm outer dia pipe
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. 16.25.1 made of G.I wire of dia 4 MM
16.25.2 Made of G.I wire of dia 4 mm PVC Coated Achieve outer not less than 5 mm in reqauired colour and shade
Ashlar Masonary: Stone work in supper structure upto floor five level in cement mortar 1:6 (1 Cement: 6 Coarse Sand )including pointing with cement Mortar 1:2 (1 White Cement :2 Stone dust) with an admixture of pigment matching the stone shade and curing complete: 7.10.1 in Plain Ashlar 7.10.1.1 One face dessed RED sand stone
White Sand Stone
7.10.1.2 Both faces dressed RED SAND STONE
WHITE SAND STONE
7.10.2 In Ashlar Punched (Ordinary) 7.10.2.1 One face punched RED Sand Stone
White Sand Stone
7.10.2.2 Both faces Punched Red Sand Stone
White Sand Stone
Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches removing the roots and stackig of servicable material and disposal of unservicable mateiral. 2.27.1 Beyond 30 cm girth upto and including 60 cm girth
2.27.2 Beyond 60 cm girth uupto and including 120 cm girth
2.27.3 Beyond 120 cm girth upto and including 240 cm girth
2.27.4 Above 240 cm girth
Providing and fixing special quality choromium plated brass cupboard locksof approved quality with six levers including necessary screws etc completed 40 mm
Providing and fixing choromum plated brass 50 mm cupboard or wardrobe knobs with nuts complte
Providing and fixing bright finished brass casement stays (Straight peg type) with necessary screws etc complete 9.87.1.300 mm weighing not less than 330 gms
9.87.2.250 mm weighing not less than 280 gms
9.87.3.200 mm weighing not less than 240 gms
Providing and fixing ISI marked oxidized M.S pressed butt higes with necessary screws etc completed. 125x65x2.12 mm
50x37x1.50xmm
Providing and fixing bright finished brass casement window fastener with necessary screws etc complete.
Providing and fixing ISI 12817 marked Stainless steel Butt Hinges heavy wight with Stainless Steel screw etc complete 9.72.1 125x64x2.50 mm
Furniture Funiture itmes required for sub-division office. Executive office moving chair (double cushoin)
Executive Office I Shaped Table (Superior quality)
Normal office chairs (moving type superior quality)
Office table (meduum size)
Round Table large size
Sofa set cith centre table Aee's room
Side tablel
Large size steel locker for office record
Paper tray
Foot Rest
Elevator writing desk (medium size)
Flex banners with frames and without frames
Shamiyans with all accessories
Arragement of Photography and videogrpahy with printing
Hire charges for welding maching including transportation to site alongwith blacksmith
Carriage of materials by Mechnical Transport Stone/stone soiling lead upto 1 km
Stone/stone soiling lead upto 2 km
Stone/stone soiling beyond 5 km upto 10 kms per
Stone/Stone soiling beyond 10 km upto 20 km per km
Stone/Stone Soiling 20 km per additional km
Stone aggregrate 40 mm and above lead upto 1 km
Stone aggregrate 40 mm beyond 5 km upto 10 lms
Stone aggregrate 40 mm beyond 10 kms upto 20 km
Stone aggregrate 40 mm beyond 20 km per additional km
Stone aggregrate below 20 mm and sand lead upto 1 km
Stone Aggregrate beyond 5 km upto 10 km
Stone Aggregrate beyond 10 km upto 20 km
Stone Aggregrate beyond 20 km per additional km
Cement/Steel/C.I Pipes lead utpo 1km
beyond 5 km upto 10 km
beyond 10 km upto 20 km
beyond 20 km per additional km
Bricks lead utpo 1 km
beyonnd 5 km upto 10 km
beyond 10 km upto 20 km
Crates lead utp 1 km
beyond 5 km upto 10 km
beyond 10 km upto 20 km
Carriage of earth lead upto 1 km
beyond 5 km upto 10 km
beyond 10 km upto 20 km
beyond 20 km per additional km
Carriage of EC Bags upto 1 km
beyond 5 km upto 10 km
beyond 10 km upto 20 km
beyond 20 km per additional km
Carriage of material by manual means upto 50 mtrs Aggregrate 20 mm and sand
Aggregrate 40 mm
Stone/Stone soiling
Cement
Crates
Earth work
Bricks
Steel
Ec bags
GHULAM MOHAMMAD
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .