Formation of WBM road and drain to the Arokianathan Nagar in Muthialpet, Puducherry.

Amount

Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. - Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Disposal of debries / surplus excavated earth including loading, unloading and conveyance to low lying areas with in 2 KM lead as directed by the Engineer-in-charge.

Earthwork in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including ressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as per direction of Engineer-in-charge , within a lead of 50m - all kinds of soil

Earth work in surface excavation not exceeding 30cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including getting out and disposal of excavated earth up to 50m and lift up to 1.5m, as per direction of Engineer-in-charge - All kinds of soil

Supply of Quarry rubbish including stacking to department gauge for premeasurement and spreading required thickness

Supplying and filling with gravel (excluding rock) in layers not exceeding 20cm in depth , breaking clods , watering , rolling each layer with 1/2 tonne roller , or wooden or steel rammers and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes capacity including all leads and lift (Payment will be made based on level measurement)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:2:4 (1 cement : 2 fine aggregate : 4 gradedstone aggregate 20mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all workupto plith level - 1:4:8 (1 cement : 4 fine aggregate : 8 gradedstone aggregate 40mm nominal size)

Centring and shuttering including strutting , propping etc. and removal of form work for - foundations, footings, bases for columns

Cement concrete flooring 1:2:4 (1 cement : 2 fine aggregate : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc .complete - 40mm thick with 20mm nominal size stone aggregate

Steel work welded in built up sections / framed work , including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - in gratings, frames, guard bar, ladder, railings, brackets,gates and similar works

Painting with synthetic enamel paint of approved brand and manufacutre to give an even shade - Two or more coats on newwork

12mm cement plaster of mix -1:4 ( 1 cement : 4 fine aggregate)

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite Crushable type such as moorum/gravel for screening and gravel for binding to fill up the interstices of coarse aggregate, watering and compacting to the required density - by manual means - Water bound macadam Gr-I with Gravel screening. (As per MoRTH specification, 4th Revision)

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite Crushable type such as moorum or gravel for screening and gravel for binding to fill up the interstices of coarse aggregate, watering and compacting to the required density - by manual means - Water bound macadam Gr-II with moorum or gravel screening. (As perMoRTH specification, 4th Revision)

Fabrication, supply and fixing of village/informatory name board of size 106mx0.61mts. The width of board is tapered at 0.8mts upto 1.06mts to give the traiangular shape at one end with high intensity reflective sheeting of required colour encapsulated on aluminium sheets of not less than 2mm thick suitably supported and framed with 25mm x 25mm x3mm AISI 316grade stainless steel pipe of 38mmdia(outer dia 2mm wall thickness). The village name/street names, lettering and symbols willbe provided by High intensity grade white sheetinf. The Board is supported by Two nos. of 63mm dia post S. S pipes for 2.0mts height with same dia Dummy plate arrangedment at the top. The board frame and post pipes are welded by Tig welding with necessary polishing etc., and M.S.pipes of 50mm dia for a length of 35cm will be welded at the bottom of the posts and fixed in a ground pit of size 0.45x0.45x0.5mts with PCC 1:2:4. Rate includs all the materials. S.S. welding, grinding, polishing fabrication charges, conveyance etc., including earth work and P.C.C charges, complete .

B.RAMACHANDRAN

A ANBU