HDPE Pipeline

Earthwork in excavation for Pipeline / Drains as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD/304

Cutting road surface including stacking of excavated materials for pipe/Drain line trenche work, Cutting open C.C.Road Surface etc., for finished item of Work.

Manufacture, supply, & delivery of Polyethylene pipes (PE-100 Grade) for water supply conforming to IS 4984-2016 including transportation to any where in T.G, but excluding GST and specials etc., complete. (Supply upto 90 mm dia in coil & above 90 mm dia stright length in6 M.)

Manufacture, Supply, & Delivery of HDPE fittings conforming to IS 4984 1995 including transportation to anywhere in T.G. Excluding taxes. PIPE ENDS LONG NECK OD 75MM

Manufacture, Supply, & Delivery of HDPE fittings conforming to IS 4984 1995 including transportation to anywhere in T.G. Excluding taxes. MS FLANGED OD 75 MM

Manufacture, Supply, & Delivery of HDPE fittings conforming to IS 4984 1995 including transportation to anywhere in T.G. Excluding taxes.TEE OD 75 MM

Manufacture, Supply, & Delivery of HDPE fittings conforming to IS 4984 1995 including transportation to anywhere in T.G. Excluding taxes. BENDS OD 75 MM

Manufacture, Supply, & Delivery of HDPE fittings conforming to IS 4984 1995 including transportation to anywhere in T.G. Excluding taxes. END CAPS OD 75 MM

GI Bolts/Nuts/Washers

Laying and jointing of HDPE pipes in ready made trench by butt fusion welding as per IS:7634-part-II/1975 as amended from time to time to 5 the alignment and gradient and testing the pipeline to the required pressure 75mm dia OD

Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG-40/SG-400/15 or GGG-50/SG 500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and 6 seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per requirement of the dept. (PN 16)