REPAIR MAINT OF STREET LIGHT OTHER CONNECTED WORKS AT AHRR UNDER GE EM R R HOSPITAL DELHI CANTT 10

Amount

Repairing/Checking of existing street light/flood light/ post top lantern/ bollard light of any type or description, fixed in vertical position with poles/wall /on high mast including disconnecting the electric connection, taking down from pole/high mast/wall if required, carrying out necessary repairs like disconnection of wire/cable, carbon removing, cleaning of acrylic/glass sheet cover and replacing of defective parts as required at site to make the lights fully functional and refixng the same with clamps, screw, washer and other fixing accessories at same location or any other location, connecting with electric feeder and testing for functioning by engaging sufficient man power and tool & plant etc to ensure safety of light / pole as well as working personnels complete all as specified and directed. Note for item No. 1 : (a) The cost of all kind of repair /servicing/ replacement of defective items/devices and other minor parts/spares or insulation tape, ferruls,lugs,connector,fixing accessories as and when required for making the all street lights fully functional, is deemed to be included in quoted rates. However, the major parts / items shall be measured & paid separately under relevant item of this Schedule. (b) The cost of Tool & plant, ladder any type for street light repairing deemed to be included in quoted rates. (c) Complaint slip in duplicate and necessary stationery shall also be arranged by the contractor without any extra cost for recording / monitoring of street light complaints. (d) Contractor shall deploy a supervisor cum electrician daily for 08 hours with serviceable mobile to receive the complaints, maintain the complaint slip, checking and attending the street light complaints in the evening every day including sunday & holidays and monitor the street light repairing team. (e) All the Complaint / fault(s) once lodged to the rep of contractor verbaly, telephonically or with complaint slip shall be rectified within 24 hrs and after rectification the complaint slip should be handed over to concern JE E/M. If contractor or his tradesmen fails to rectify the complaint within 24 hrs from the time of receipt, the compensation/penalty of Rs. 500.00 (Rupees Five Hundred only) per complaint per day (i.e 24 hrs ) shall be recovered from the contractor’s dues. (f) In case contractor / his rep does not attend the office to receive complaint from JE E/M or his rep, penalty of Rs. 1000.00 (Rupees One Thousand only) per day (i.e 24 hrs ) shall be recovered from the contractor’s dues.

Supply only in replacement of driver for LED street light / Flood light of 40 watts to 60 watts capacity or as per existing make & model to made LED light serviceable complete all as specified and directed.

All as per ser item No.2 but of LED light 90 watts to100 watts capacity.

All as per ser item No.2 but of LED light 120 watts and above capacity.

Supply only in replacement of 1100 volt grade heavy duty cable PVC insulated copper conductor, served with inner sheathing of PVC tap and over all PVC sheathed in service connection for street light from FRP junction box to street light of size 3 core 1.5 sqmm complete all as directed.

Supply only in replacement LED bulb 5 watts.

Supply only in replcement power contactor for street light panel 63 Amps rating capacity with 415 AC volt complete with testing all as specified and directed.

Supply only in replcement of MCB SP 6 Amps to 32 Amps 240 Volts.

Taking down existing street light of any type and Supply & fixing LED street light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete complete all as specified and directed.

All as per srl item No 9 but of 60 Watts.

All as per srl item No 9 but of 90 Watts.

All as per srl item No 9 but of 120 Watts.

Taking down existing flood light of any type and Supply & fixing LED flood light 50 watt 230 V, AC, outdoor type with thermal management in multiple optics with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

All as per srl item No 13 but of 100 Watts flood light.

All as per srl item No 13 but of 120 Watts flood light.

Supply & fixing in replacement LED Post top 25 watts, new generation, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LED's complete all as specified and directed.

All as per srl item No 16 but for 35 Watts.

Supply & fixing in replacement of LED 9 watts bollards for pathways & gardens are made with aluminium extrusion strudiness and better finish. UV stabilized injection moulded opal polycarbonate diffuser for spot- free lighting operating on, 230 volts, 50 Hz complete all as specified and directed.

Supply & fixing in replacement street light fitting bracket, 1.5 mtr long made out of galvanized iron pipe of 40 mm dia size light grade complete with nut, bolts, clamp washer etc inclusive of one primer coat, one under coat and one finishing coat of silver paint, complete all as directed.

Supply & fixing in replacement street light digital timer switch DIN type Daily /weekly with 2CO 16 Amps complete all as specified and directed.

Supply & fixing in replacment street light panel 3 phase frame of capacity 63 Amp 3 Pole incl Digital timer, power contactor, isolator 4 pole, LED indicator lamps R, Y, B with switch for bypass arrangment and fixing by making proper foundation with angle iron frame or fixed in pole all as directed by Engr -in-charge.

Supply & fixing in replacement SMC/FRP junction box for street lighting for 3 phase/4 core, outdoor type, inside dimensions (HxWxD) 240mm X 130mm X 110mm, consisting bus bar rating 63 amps 4 strips aluminium with bus bar mounting colour R, Y, B, N on DMC unbreakable insulator with cable entry from bottom and/or sides, MCB SP 6-32 amps - 01 No, shock proof, rust proof, temper proof, 100% weather proof, restricts unauthorised tapping, maintenance free, fire retardant, having front opening and locking arrangement, box duly fixed on the pole with flat iron clamp of size 25 mmX3mm with nuts & bolts complete all as specified and directed. (Note : Cost of incoming & outgoing cable lugs & glands of suitable size deemed to be included in the quoted rate)

Supply & fixing in replacement HOT moulded (FRP) junction box for street light pole with locking arrangement with IP 65 protection of size 295 mm x 255 mmx 120 mm incl 4 way heavy duty terminal block with and two number of PVC cable entry gland of standard size with suitable stainless steel bracket to fix with pole, including taking down existing complete all as directed.

M&L for taking down old U/S cable from trench/wall/pole of any height and Supply, laying, jointing, testing and commissioning new XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sqmm x 2.0 Core in trench/ on pole/ in duct complete all as specified and directed.

All as per srl item No 24 here-in-before but 16 sqmm x 2.0 Core.

All as per srl item No 24 here-in-before but 10 sqmm x 4.0 Core.

All as per srl item No 24 here-in-before but 16 sqmm x 4.0 Core.

All as per srl item No 24 here-in-before but 25 sqmm x 4.0 Core.

All as per srl item No 24 here-in-before but 35 sqmm x 3.5 Core.

Excavation in trenches in soft / loose soil not exceeding 1.5 meter depth and not exceeding 1.5 meter wide and getting out complete all as directed.

M&L for sand cushioning with a layer of river dry fine sand 8 cm thick before laying the cable and 15 cm after laying the cable in trenches to cover under ground cable, complete all as specified & directed. Note- penned thickness of sand layer will be considered for measurement.

Supplying laying, brick sub class 'B' common burnt laid in trenches for cable protection complete all specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as directed.

Removal of excavated material not exceeding 50 meters and depositing where directed at a level not exceeding 1.5 meter above the starting point complete all as directed.

M&L for road cutting, including excavation, returning filling in, spreading, leveling, well ramming in layers, soiling with broken boudders/ stones, WBM 7.5 cm thick coarse aggregate received from dismantling the existing road, premix, carpeting 25 mm thick using ready mix patch mate material, rolled and compacted for road patch repair work, complete all as directed.

S&F of GI pipe of 50 mm nominal dia light grade fixed to poles with clamps nuts, bolts and washers or laid under road crossing or fixed to wall complete all as specified and directed. (Note : The cost of MS clamp, nut, bolt, washer and GI fittings etc shall be inclusive in the item rate.)

Labour and necessary T&P for shifting of street light pole of any type/length from existing position to new location whereas directed. this includs dismentling of pole, transportation to new location, T&P required & errection on site complete all as specified and directed. Note: Excavation, refilling, removal and PCC work required for completion of job are deemed to be included in quoted rate only.

M&L for trimming / cutting of tree branches of girth upto 150 mm dia or any size of all around 3 m obstructing lumination of street light/ flood light/ building security light or touching any E/M installation including required T&P and removal of trimmed tree branches complete all as specified and directed. (Note: Each cut shall be measured and paid.)

M&L for cleaning, scrubbing and preparation of old, rusted painted surface of existing steel tubular pole of 09 to 11 mtr height complete and painting with one coat of aluminium paint including channels/ brackets, street light brackets, cross arms and making black & yellow alternative strips of 30 cm height with synthetic enamelled paint upto 1.5 mtr height complete all as specified and directed.

M&L for writing pole numbers with yellow synthetic enamelled paint after making circular base with black synthetic enamelled paint complete all as directed.

Supply & fixing in replacement of micro prismatic reflective sheet, min 2.5 cm wide, with adhesive base for directly fixing on HT/LT steel tubular/PCC pole without nail or any other fixing material at suitable height, in Red/White/Yellow colour complete all as directed.

CHAUHAN ENTERPRISES

PRASAD ELECTRICALS

ACR ENTERPRISES