Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹20.8 LAdmitted-Finance | -37.80% | ₹20.8 L | L1 | Admitted-Finance |
| 2 | L2₹21.4 LAdmitted-Finance | -35.99% | ₹21.4 L | L2 | Admitted-Finance |
| 3 | L3₹24.0 LAdmitted-Finance | -28.21% | ₹24.0 L | L3 | Admitted-Finance |
| 4 | L4₹26.4 LAdmitted-Finance | -21.11% | ₹26.4 L | L4 | Admitted-Finance |
| 5 | L5₹33.5 LAdmitted-Finance | +0.00% | ₹33.5 L | L5 | Admitted-Finance |
Tender Value
₹33.5 L
EMD Value
₹66,940
Closing Date
6 Mar 2026, 6:00 pmClosed
EE 6
JDA Jaipur
Construction of Drain and road repair work at tara nagar zone 6 JDA, Jaipur
2026_JDAJP_541830_1
EE6_2025_26_NIB_28
Open Tender
Civil Works
180 days
EE 6 Area
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
Offline
₹66,940
Yes
12 Mar 2026
25 Feb 2026
12 Mar 2026
25 Feb 2026
6 Mar 2026
25 Feb 2026
Providing and laying Precast reinforced cement concrete Box culvert section of M-40 grade designed for 'AA' class loading as per IRC specifications including to effect of impact, EQ etc. complete on firm base of 200mm thick lean concrete of M-10 grade with aggregate of size 40mm nominal of following internal size the work includes required safety measures cost of design of RCC Precast Box and its proof checking from IIT / NIT / Government Engineer College complete in all respect as per specifications Size 1.00 M x 1.00 M
Dismantling of flexible pavements and disposal of dismantled materials upto a lead of 100 m, stacking serviceable and unserviceable materials separately as per MoRTH Specification Clause 202 By Manual Means Bituminous Courses
Carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. Building Rubbish Stone metal (Grit and ballast etc.) . For 10 Km.
Construction of solid block masonry of M20 grade solid concrete block having nominal size 400 mm x 200 mm x 200 mm in cement mortar 1:3 in Superstructure upto floor level V with all lead & lift.
CEMENT PLASTER Plaster on new surface on wall in cement sand mortar 1:3 including racking of joints etc. complete fine finish: 25 mm thick
Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide
Construction of un-reinforced, plain cement concrete 00 pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 602.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 31.5 mm, mixed in a concrete mixer of not less than 0.5 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed Side Formwork (steel channel, laying and fixing of 150 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using water finishing to lines and grade as per drawing and MoRTH Specification Clause 602 including vaccum dewatering process with all required equipments (Dowel Bars will be paid seprately)
Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 Sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils
Providing and fixing of Reinforced Ferro cement Drain cover designed for class "AA" loading duly marked on cover with adequate steel reinforcement having thickness 75 mm to 150 mm anti- corrosive bitumen painted M.S. plate Rim and on M.S. lifting hooks admixture like plasticizer bond improving compound shrinkage resistance compound abrasion resistant complete as per approved design etc. for drain Opeining Size 451 to 700 mm Standard Drain Cover Size 1000mm x 800mm x 100mm
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.18 MB
28DrainTaraNgrEE6.pdf
Tender Documents • 2.05 MB
BOQ_965855.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid