15 CFC Tied - CT

Amount

Earth work excavation for foundation and depositing on bank with initial lead and lift etc. completely I hard stiff clay, stiff black hard redearth, shales, gravelstony earth and earth mixed with small size boulders and hard gravelly soil etc., compltete as per standard specification (SS20B)

Plain Cement Concrete 1:4:8 Mix (one part cement, four part Msand and eight part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. loading and unloading charges and labour charges for mixing. Laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.

Random rubble masonry in cement mortar 1: 5 (one cement five sand) in foundation and basement using best HBG Rough stone and Band stone with simultaneous flush pointing etc. complete complying with standard specifications and as per drawings and as directed by departmental Engineers using new rough stone & sufficient bond stones with simultaneous pointing including all cost & conveyance of materials.

Brick Work in Cement Mortor 1:5 Mix (one cement, five Msand) using new best II Class Bricks of size 9 ” x 4 3/8 “x 2 3/4 ” from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications

Supplying and erectioning steel sheet centering and shuttering including necessery supports for plain surface in foundation and basement for RCC roof rectancular or T beams, L beams, lintel and bedblock staircase waist slap and landing beam etc., with all bracing using M.S sheets spaced at 75cm C/C etc., completly complying with standard specifications.

For Grade beam

For Columns

For Roof(Ground Floor)

Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part Msand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc. Complete with std. Specifications.

Plastering in Cement Mortor 1:3 Mix (one cement, Three sand ) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. complying with std. specifications

Supplying and fabricating and placing in position of MS or RTS rods for all rainforced works including cost of steel and binding wire and all labour for cutting and fabrication and other incidental charges etc., completly complying with standard specifications.

Ceiling Plastering in cm 1:3, 10mm thick including cost and conveyence all materials to site and all labour charges and incidental charges etc.,completly complying with standard specifications.

Plastering in cm 1:5, 12 mm thick including cost and conveyence all materials to site and all labour charges and incidental charges etc.,completly complying with standard specifications.

Plastering in cm 1:5, 20mm thick including cost and conveyence all materials to site and all labour charges and incidental charges etc.,completly complying with standard specifications.

Collection supply and filling of well gravel filling approved quarry including cost and Conveyance of all materials to site and all labour charges for filling etc., Complete.

Supplying and fixing over the floors best quality of scratch ceramic tiles of 30 c.m x 30c.m x 6mm size of approved colour laying with cement mortor 1:2 mix pointing the joints with colour pigments etc. Complete.

Finishing the top of flooring with granothatic flooring with cement concrete 1:2:4 (one cement, two sand and four aggrigate) using 10 to 12mm stone chips – 25mm tk etc., Complete.

Dadooing sides of walls with Glazed tils of size 0.30m x 0.20m x 0.006m including cost and conveyance and all labour and materials complete complying with standard specifications and drawings and as directed by the departmental Engineers.

Supplying and fixing of M.S. Door of approved design for Gate, doors, windows and ventilaors using necessary mild steel flats for inner and outermembers xhich should be fixed to window frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications.

Supply of thousand ltr. capacity PVC (HDPE) water tank including cost and conveyance Complete complying with standard specifications and as directed by the departmental Engineers.

White washing two coats with best quality of slacked shell lime including cost and conveyence all charges etc.,completly complying with standard specifications.

Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications for 10 sqm

Supplying and fixing in position colour glazed INDIAN TYPE WATER CLOSET with 'P' or 'S' trap including cost and conveyance of water closet and labour for fixing including flooring with brick jelly concrete etc., complete

Supplying and fixing in position colour glazed EUROPEAN WATER CLOSET with 'P' or 'S' trap and double flapped seat cover, 10.00 litres capacity P.V.C. low level FLUSHING TANK including all internal fittings fixed on C.I. brackets, 12mm PVC or brass nipple, chromium plated brown headed stopcock, 12mm nylon connection with necessary teakwood plugs, clamps, screws to the portion coming with walls and floors, including dismantling masonry and redoing the same to the original condition.

Supplying and fixing of 110mm dia PVC /4kgpipes including cost and conveyence of all materials and all other labour charges and incidental charges etc., completly complying with standard specifications.

Wiring with 2x1.5 sq.mm (22/0.30) PVC unsheated SC copper cable of 1100V graded in suitable PVC rigid pipe on wall and ceiling with PVC accessories 5A F.T switch intlush with wall corered with hylum sheet of 3mm thick with painting of suitable colour for Open P V C light/Fan point (S.D.20)

Supplying and fixing of 4 ft. 40 W tube light flu fitting complete with copper choke and condenser with TW round blow on wall and ceiling with PVC unsheated lead from terminal tube fitting. (SD 88)

Supplying and fixing of 4 ft. 40 W tube light flu fitting complete with copper choke and condenser with TW round blow on wall and ceiling with PVC unsheated lead from terminal tube fitting. (SD 88)

Supplying and fixing of M.S. grill of approved design for Gate, doors, windows and ventilaors using necessary mild steel flats for inner and outermembers xhich should be fixed to window frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications.

B SUNDAR